100LVELT22 3.3V Dual LVTTL/LVCMOS to Differential LVPECL Translator

Similar documents
DM74ALS520 DM74ALS521 8-Bit Comparator

FST Bit Low Power Bus Switch

DM74LS14 Hex Inverter with Schmitt Trigger Inputs

DM74ALS174 DM74ALS175 Hex/Quad D-Type Flip-Flops with Clear

Low Power Hex TTL-to-ECL Translator

FIN V LVDS High Speed Differential Driver/Receiver

DM74LS132 Quad 2-Input NAND Gate with Schmitt Trigger Input

MM74HC132 Quad 2-Input NAND Schmitt Trigger

74F32 Quad 2-Input OR Gate

74AC04 74ACT04 Hex Inverter

DatasheetArchive.com. Request For Quotation

Low Power Hex ECL-to-TTL Translator

DM74LS126A Quad 3-STATE Buffer

FIN1532 5V LVDS 4-Bit High Speed Differential Receiver

MM74HC132 Quad 2-Input NAND Schmitt Trigger

FST32X Bit Bus Switch

FST Bit to 32-Bit Multiplexer/Demultiplexer Bus Switch

74F132 Quad 2-Input NAND Schmitt Trigger

DM74ALS169B Synchronous Four-Bit Up/Down Counters

FSTD Bit Bus Switch with Level Shifting

FST Bit Low Power Bus Switch

MM74HCU04 Hex Inverter

MM74HC00 Quad 2-Input NAND Gate

DM74ALS14 Hex Inverter with Schmitt Trigger Inputs

74ALVC Low Voltage 16-Bit Bidirectional Transceiver with 3.6V Tolerant Inputs and Outputs and 26Ω Series Resistors in A Port Outputs

FST Bit Bus Switch

DM74AS169A Synchronous 4-Bit Binary Up/Down Counter

Low Power Quint 2-Input OR/NOR Gate

74F139 Dual 1-of-4 Decoder/Demultiplexer

DM74ALS245A Octal 3-STATE Bus Transceiver

FSTU32160A 16-Bit to 32-Bit Multiplexer/Demultiplexer Bus Switch with 2V Undershoot Protection

FST3253 Dual 4:1 Multiplexer/Demultiplexer Bus Switch

74LCX125 Low Voltage Quad Buffer with 5V Tolerant Inputs and Outputs

74AC00 74ACT00 Quad 2-Input NAND Gate

74ALVC16500 Low Voltage 18-Bit Universal Bus Transceivers with 3.6V Tolerant Inputs and Outputs

MM74HC4066 Quad Analog Switch

FST Bit Bus Switch

DM74LS83A 4-Bit Binary Adder with Fast Carry

74F157A Quad 2-Input Multiplexer

DM74LS191 Synchronous 4-Bit Up/Down Counter with Mode Control

74VHC VHC VHC Channel Analog Multiplexer Dual 4-Channel Analog Multiplexer Triple 2-Channel Analog Multiplexer

74ACTQ74 Quiet Series Dual D-Type Positive Edge-Triggered Flip-Flop

MM74HC4051 MM74HC4052 MM74HC Channel Analog Multiplexer Dual 4-Channel Analog Multiplexer Triple 2-Channel Analog Multiplexer

74LVT245 74LVTH245 Low Voltage Octal Bidirectional Transceiver with 3-STATE Inputs/Outputs

74ACTQ821 Quiet Series 10-Bit D-Type Flip-Flop with 3-STATE Outputs


DM74AS651 DM74AS652 Octal Bus Transceiver and Register

74ABT273 Octal D-Type Flip-Flop

CD4069UBC Inverter Circuits

DM96S02 Dual Retriggerable Resettable Monostable Multivibrator

74AC175 74ACT175 Quad D-Type Flip-Flop

74LVT LVTH16374 Low Voltage 16-Bit D-Type Flip-Flop with 3-STATE Outputs

74ACQ241 Octal Buffer/Line Driver with 3-STATE Outputs

74AC821 74ACT Bit D-Type Flip-Flop with 3-STATE Outputs

DM74ALS652 Octal 3-STATE Bus Transceiver and Register

74AC573 74ACT573 Octal Latch with 3-STATE Outputs

74AC244 74ACT244 Octal Buffer/Line Driver with 3-STATE Outputs

Is Now Part of To learn more about ON Semiconductor, please visit our website at

74F583 4-Bit BCD Adder

NC7WZ86 TinyLogic UHS Dual 2-Input Exclusive-OR Gate

CD4724BC 8-Bit Addressable Latch

74AC374 74ACT374 Octal D-Type Flip-Flop with 3-STATE Outputs

74AC574 74ACT574 Octal D-Type Flip-Flop with 3-STATE Outputs

74ABT Bit Transparent D-Type Latch with 3-STATE Outputs

74AC74 74ACT74 Dual D-Type Positive Edge-Triggered Flip-Flop

74AC257 74ACT257 Quad 2-Input Multiplexer with 3-STATE Outputs

NC7SZ08 TinyLogic UHS 2-Input AND Gate

74AC251 74ACT251 8-Input Multiplexer with 3-STATE Output

74AC244 74ACT244 Octal Buffer/Line Driver with 3-STATE Outputs

DatasheetArchive.com. Request For Quotation

CD4541BC Programmable Timer

NC7S08 TinyLogic HS 2-Input AND Gate

Synchronous Binary Counter with Synchronous Clear

Triple 2-Channel Analog Multiplexer/Demultiplexer

74LVT LVTH16373 Low Voltage 16-Bit Transparent Latch with 3-STATE Outputs

CD4066BC Quad Bilateral Switch

74ABT377 Octal D-Type Flip-Flop with Clock Enable

USB1T11A Universal Serial Bus Transceiver

NC7ST00 TinyLogic HST 2-Input NAND Gate

CD4066BC Quad Bilateral Switch

NC7S86 TinyLogic HS 2-Input Exclusive-OR Gate

74AC574 74ACT574 Octal D-Type Flip-Flop with 3-STATE Outputs

NC7SZ386 TinyLogic UHS 3-Input Exclusive-OR Gate

CGS3321 CGS3322 CMOS Crystal Clock Generators

NC7SZ00 TinyLogic UHS 2-Input NAND Gate

74ABT245 Octal Bi-Directional Transceiver with 3-STATE Outputs

74ABT244 Octal Buffer/Line Driver with 3-STATE Outputs

NC7WZ125 TinyLogic UHS Dual Buffer with 3-STATE Outputs

74AC245 74ACT245 Octal Bidirectional Transceiver with 3-STATE Inputs/Outputs

ISO-9001 AS9120certi cation ClassQ Military

NC7SZ175 TinyLogic UHS D-Type Flip-Flop with Asynchronous Clear

Low Power Hex TTL-to-ECL Translator

74AC174 74ACT174 Hex D-Type Flip-Flop with Master Reset

Multiplexer/Demultiplexer Triple 2-Channel Analog Multiplexer/Demultiplexer

DM74LS161A DM74LS163A Synchronous 4-Bit Binary Counters

CD4016BC Quad Bilateral Switch

DM74LS75 Quad Latches

NC7S04 TinyLogic HS Inverter

74AC299 74ACT299 8-Input Universal Shift/Storage Register with Common Parallel I/O Pins

MM74HC221A Dual Non-Retriggerable Monostable Multivibrator

Transcription:

3.3V Dual LVTTL/LVCMOS to Differential LVPECL Translator General Description The is a LVTTL/LVCMOS to differential LVPECL translator operating from a single +3.3V supply. Both outputs of a differential pair should be terminated in 50Ω to V CC - 2.0V even if only one output is being used. If an output pair is unused both outputs can be left open (un-terminated). The 100 series is temperature compensated. Ordering Code: Features January 2003 Revised January 2003 Typical propagation delay of 350 ps <100 ps skew between outputs Max I CC of 28 ma at 25 C When TTL input is left Open Q output defaults HIGH Fairchild MSOP-8 package is a drop-in replacement to ON TSSOP-8 Flow through pinout Meets or exceeds JEDEC specification EIA/JESD78 IC latch-up test Moisture Sensitivity Level 1 ESD Performance: Human Body Model > 2000V Machine Model > 200V Product Order Number Package Code Package Description Number Top Mark M M08A KVT22 8-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow M8 MA08D KR22 8-Lead Molded Small Outline Package (MSOP), JEDEC MO-187, 3.0mm Wide (Preliminary) Devices also available in Tape and Reel. Specify by appending suffix letter X to the ordering code. Connection Diagram Logic Diagram 3.3V Dual LVTTL/LVCMOS to Differential LVPECL Translator Pin Descriptions Top View Pin Name Q n, Q n D 0, D 1 V CC GND Description LVPECL Differential Outputs LVTTL/LVCMOS Inputs Positive Supply Ground 2003 Fairchild Semiconductor Corporation DS500777 www.fairchildsemi.com

Absolute Maximum Ratings(Note 1) Supply Voltage (V CC ) 0.0V to +7.0V Input Voltage (V I ) V I V CC 0.0V to +7.0V DC Output Current (I OUT ) Continuous 50 ma Surge 100 ma Storage Temperature (T STG ) 65 C to +150 C Recommended Operating Conditions Power Supply Operating V CC = 3.0V to 3.8V LVTTL/LVCMOS Input Voltage 0.0V to V CC Free Air Operating Temperature (T A ) 40 C to +85 C Note 1: The Absolute Maximum Ratings are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum rating. The Recommended Operating Conditions table will define the conditions for actual device operation. LVPECL DC Electrical Characteristics V CC = 3.3V; GND = 0.0V (Note 2) 40 C 25 C 85 C Min Typ Max Min Typ Max Min Typ Max Units I CC Power Supply Current 28 28 29 ma V OH Output HIGH Voltage (Note 3) 2215 2420 2275 2420 2275 2420 mv V OL Output LOW Voltage (Note 3) 1470 1745 1490 1680 1490 1680 mv Note 2: Output parameters vary 1 to 1 with V CC. V CC can vary ±0.15V. Note 3: Outputs are terminated through a 50Ω resistor to V CC 2.0V. Note: Devices are designed to meet the DC specifications after thermal equilibrium has been established. Circuit is tested with air flow greater than 500LFPM maintained. LVTTL/LVCMOS DC Electrical Characteristics V CC = 3.3V; GND = 0.0V (Note 4) T A = 40 C to 85 C Units Condition Min Typ Max I IH Input HIGH Current 20 V IN = 2.7V µa 100 V IN = V CC I IL Input LOW Current 200 µa V IN = 0.5V V IK Clamp Diode Voltage 1.2 V I IN = 18 ma V IH Input HIGH Voltage 2.0 V V IL Input LOW Voltage 0.8 V Note 4: V CC can vary ±0.15V. Note: Devices are designed to meet the DC specifications after thermal equilibrium has been established. Circuit is tested with air flow greater than 500LFPM maintained. AC Electrical Characteristics V CC = 3.3V; GND = 0.0V (Note 5) 40 C 25 C 85 C Units Figure Min Typ Max Min Typ Max Min Typ Max Number f MAX Maximum Toggle Frequency TBD TBD TBD MHz t JITTER Cycle-to-Cycle Jitter TBD TBD TBD ps t PLH / t PHL Propagation Delay (Note 6) 200 350 600 200 350 600 200 350 600 ps Figure 1 t SKEW Skew Output-to-Output 30 100 30 100 30 100 Part-to-Part 400 400 400 ps t r, t f Output Rise Time Q (20% to 80%) 200 550 200 500 200 500 ns Figure 2 Note 5: V CC can vary ±0.15V. Note 6: Specifications for standard LVTTL input signal (see Figure 1). www.fairchildsemi.com 2

Switching Waveforms FIGURE 1. LVTTL to Differential LVPECL Propagation Delay FIGURE 2. Differential Output Edge Rates 3 www.fairchildsemi.com

Physical Dimensions inches (millimeters) unless otherwise noted 8-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Package Number M08A www.fairchildsemi.com 4

Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 8-Lead Molded Small Outline Package (MSOP), JEDEC MO-187, 3.0mm Wide Package Number MA08D 3.3V Dual LVTTL/LVCMOS to Differential LVPECL Translator Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com 5 www.fairchildsemi.com