Mondi Štětí a. s. STANDARD PART 7 PNEUMATICS
Mondi Štětí a. s. STANDARD 7 Page: 1/4 STANDARD PART 7 PNEUMATICS EXECUTION, CONDITIONS, QUALITY, REGULATIONS, STANDARDS, SUPPLIES, PROVISIONS Author: Reviewed by: Approved by: Name: Jiří Šinfelt Name: Ing. Králová Hana Name: Ing. T. Kala Position: Senior Expert U Position: ᅠ IMS Specialist Position: Maintenance Manager Signature: Šinfelt, v. r. Signature: Ing. Králová, v. r. Signature: Ing. T. Kala Valid from: 1st June 21 Dpt.: IMS and OŽP
Mondi Štětí a. s. STANDARD 7 Page: 2/4 CONTENTS 1/ INTRODUCTION This standard has been created in order to increase operation efficiency of the equipment and transferability of spare parts with regard to the target area of its utilisation. 2/ RESPONSIBILITIES The supplier/employee is obliged to observe this standard in deliveries, assemblies and repairs of pneumatic equipment including clamping and auxiliary materials with regard to the target area of its utilisation. 3/ DOCUMENTATION REQUIREMENTS The suppliers are obliged to submit the following documentation with each delivery: a b c d e f Connection diagram including adjustment data List of installed materials including catalogue sheets of non-standardised elements Air-quality requirements Description of features and sequence of switch connections Maintenance schedule Specifications of pressure vessels including safety-valves
Mondi Štětí a. s. STANDARD 7 Page: 3/4 4/ TECHNICAL SPECIFICATIONS Technical specifications of the materials are listed in the following table: Environment Press part Wire part Pre-drying, drying Clupak Calender Reeler POPE, chopper, rewinder Water content % 1 1 6-4 1 Temperature C 7 12 15 12 2 2-3 Chemism 5% NaOH 5% NaOH Vibration Hose embrittlement up to 26 C embrittlement up to 26 C embrittlement up to 26 C embrittlement up to 26 C embrittlement up to 26 C embrittlement up to 26 C Prestolok / LEGRIS LEGRIS LF 36 LEGRIS LF 36 LEGRIS LF 36 LEGRIS LF 36 LEGRIS LF 36 LEGRIS LF 3 / PRESTOLOK PARKER Piping Screw coupling Treated with + viton gasket, alternatively ERMETO + packing piece +Viton, or ERMETO + packing piece +NBR Gasket NBR Clamps RAP up to 8 o C RAN up to 12 o C AL RAN up to 12 o C AL RAP up to 8 o C installation material (screws, butterfly nuts, runners) Boxes and panels Measuring and control elements Stainless steel s, chemical-resisting Stainless steel s, chemical-resisting Metal s, heat-resisting Stainless steel s, heat-metaresistant s, heat-resisting Metal s, heat-resisting Units for air treatment Chemical-resisting Chemical-resisting Heat-resistant Heat-resistant Heat-resistant drives, cylinders, motors Stainless steel finish, heat and chemical-resistant Stainless steel finish, heat and chemical-resistant Stainless steel finish, heatresistant Standard finish, heat-resistant
Mondi Štětí a. s. STANDARD 7 Page: 4/4 5/ SUPPLIERS The following manufacturers have been selected as preferred suppliers: Parker Festo Rexroth Legris Norgren 6/ RELATED DOCUMENTATION a. Modification of pressurised air/hose and screw coupling - pressure vessels according to Regulation No.: 97/23/EG 87/44/EWG EN 286-1 - s DIN EN 837-1 - safety quick-acting couplings ISO 4414 b. Valves/valve terminals - electro-magnetic and pneumatic valves ISO 1547-1 ISO 5599-1 DVI / DVE 3845 - connecting boards for valves ISO 1547-1 ISO 5599-1 - valve terminals ISO 1547-1 ISO 5599-2 c. Pneumatic drives - cylinders ISO 6432 DIN ISO 6432 ISO 15552 NFE 493.1 UNI 129 - Forked terminals DIN ISO 814 DIN ISO 8139