Progetto2 18-05-2005 12:34 Pagina 1 RADIO REMOTE CONTROLS
IMP INT 18-05-2005 12:27 Pagina 1 t h e C o m p a n y Sist&matica is an engineering and manufacturing company specialized in radio controlled systems with commercial applications to industrial vehicles, such as hidraulically-operated trucks, cranes, agricultural equipments, tow trucks and trench rollers. A radio controlled system has much more better features in comparison with a simple radio control, such as the machine sensors position detection with the full control of the equipment and locking of any harmful or undesired movement. The main advantages of a two components (palmtop transmitter + receiver) radio-controlled system are: Operator Productivity increasing : A significant work-time reduction is the result of a free and better work-position of the operator with the best view on the work-area Safety improving: Full view and control on the moving parts avoids any kind of injuries at work Cost reduction in manufacturing components assemblage: Wireless remote control avoid connections and simplify parts assembly
IMP INT 18-05-2005 12:27 Pagina 2 Freehand FREEHAND is a radio controlled electronic system which controls the moving functions of an electrically/hidraulically-operated machine or equipment. The command unit is equipped with knob and toggle switches and is available in 2 versions: ON-OFF or PROPORTIONAL. The PROPORTIONAL version allows fine tuning on every movement speed. The receiver unit may be connected to any electric or hydraulic control; the PROPORTIONAL version allows the direct connection to the proportional valve without any further control card need and furthermore to customize a single speed for each movement. Both the ON-OFF and PROPORTIONAL versions are equipped with 2 on-off sensors for control functions.
IMP INT 18-05-2005 12:27 Pagina 3 TECHNICAL SPECIFICATION - Up to 14 movement functions - Microprocessor electronics on both - Control and Receiver Unit - Working frequency: 433.92 MHz. - operating distance: 150-300Ft 50-100 Mtrs - Control distance limiting circuit (optional) - No control relays, solid-state devices used instead, to protect the electronics failure of the device to be controlled - Direct connection to the solenoid valves - Proportional valve control circuit - Built-in loop diodes - Protection against polarity reversal - Power supply: - control rechargeable battery, 2x AA 1,5 Volt - receiver unit: 9 30 Volt dc - Autonomy (20 C in continued use) 3 mths - Dimensions: - palmtop: mm. 200x120x100 - receiver Unit: mm. 122x120x90 or mm. 160x160x90 3
IMP INT 18-05-2005 12:27 Pagina 4 Trend Trend is an electronic system based on a Radio Control and Receveir, that can be adapted to specific duty needs; it replaces traditional electric or hydraulic control systems. The soft-touch radio control switch is light and with reduced dimensions (mm. 140x60x23), and its handy shape makes its use easer. With its hooking system it can be easily transported. The Receiver has compact dimensions with a great internal accessibility, with modular components, a control system and functions diagnostic, with an easy installation and maintenance. Externally it has a 16 or 32 pin plug for the cable s output cables are supplied as option).
IMP INT 18-05-2005 12:27 Pagina 5 TECHNICAL FEATURES - Up to 16 movement functions - electronic with microprocessor on both Radio control and Receiver - 433.92 MHz frequency band - direct connection to electrovalves - protection against the polarity reversal - operating distance: 150-300Ft 50-150 Mtrs - Work temperature: -20 C: 70 C - Hamming distance: >8. Radio Control - Autonomy: 4 mths - Power supply: 9Volt battery (option Ni-Mh 8,4 Volt rechargeable) - Number of available commands: from 2 to 24 - Grade of protection: IP 65 - Dimensions: mm. 140x60x23. - Option : rechargeable battery with battery charger. 5 Receiver Unit : - Power supply : 9 30 Volt dc - Antenna: inside the receiver (option: remoted antenna) - Grade of protection: IP 65 - Dimensions: mm. 122xl20x90 or mm. 160x160x90 or mm. 260x160x90.
IMP INT 18-05-2005 12:27 Pagina 6 Easy EASY is a remote control system which allows to control wireless the moving functions of an electro-hydraulically operated machine or equipment. It can be adapted to specific working needs it replaces traditional electric or hydraulic control systems. Easy may fit with many applications truck tail-lifts, footboards for disables, winches, recovery trucks, chop trucks, livestock transport trucks, barrel trucks, tank truks, and pumps and motors control the soft-touch radio transmitter is light and with reduced dimension (mm. 46x95x18) and is really handy. The receiver has compact dimensions with a great internal accessibility, with modular components, a control system and functions diagnostic, with an easy installation and maintenance and predisposition for the cable s output.
IMP INT 18-05-2005 12:27 Pagina 7 TECHNICAL FEATURES - Up to 6 movement functions - Electronic with microprocessor on Radio control and Receiver: - 433.92 MHz frequency band. - Direct connection to electrovalves - Diodes incorporated; - Protection against the polarity reversal - Range of action: 80 metres - Work temperature: -20 C. 70 C - Hamming distance: >8. 7 Radio Control - Autonomy 6 mths - Power supply: 2 x AAA 1,5 Volt Batteries - Number of available commands: from 2 to 6 - Grade of enclosure: IP 65 - Dimensions: mm. 46x95x18. Receiver Unit : - Power supply : 9 30 Volt dc - Antenna: inside the receiver - Grade of enclosure: IP 65. - Dimensions: mm. 80x75x55.
IMP INT 18-05-2005 12:27 Pagina 8 Sist&matica range of systems meets the needs of any heavy-duty applications like: APPLICATIONS FREEHAND TREND EASY Agricultural machines Agricultural sprinklers and rainers Car transport Cattle trucks Crane trucks & Overhead platforms Light cranes Snowploughs and Salt spreaders Tank trucks Tow-trucks Trench rollers Truck boards Truck body tarpaulins Truck lifts
Progetto2 18-05-2005 12:34 Pagina 2 ADPIOPPA 2005 UK.2005 001 SISTEMATICA N.A. LLC 8721 SANTA MONICA BLVD LOS ANGELES CA 90069-4507 USA T 800.760.5113 www.usa.sistematica.it info@usa.sistematica.it SIST&MATICA srl VIA S. PERTINI 17 12030 MANTA CN ITALY T +39.0175.255.711 F +39.0175.255.715 www.sistematica.it info@sistematica.it