Designing emotions agantis XP Harmonious proportions. Elegant lines. Dynamic forms. www.grass.at, info@grass.at
2
Designing emotions Focusing on the essential Dividing systems Drawer Pan drawers System information For many, beauty and functionality cannot be embedded cover cap rounds off the look and supple- united. For us, they are inseparable. ments the style of this design piece. Whereas fitting system manufacturers have so far been limiting themselves to product functions, Grass are DWD XP Agantis combines the advantages of the adding another highlight to their programme with their proven DWD XP drawer system with timelessly newly developed Agantis design line. The engineers and designers were less concerned about optical effects than the combination of perfect function with the fascination of simple beauty. Clear lines, clear forms, with clear advantages. beautiful design. While the DWD XP drawer system has already impressed not only with its excellent movement characteristics but also with its qualitative and functional advantages such as the comfortable Tipmatic Plus opening technology, Dynamic XP drawer runners The result is impressive. the integrated Soft-close system or well thought-out organising and dividing systems, these highlights are The modest, linear DWD XP Agantis drawer sides are now supplemented by a design which has yet to meet The flexible Flexline drawer system available in the standard heights 95 mm and 127 mm its match in terms of pure forms in fitting systems. of the Sidewood series supplements and can be additionally expanded with a square rail and Agantis Top an exclusive glass top piece. The flushly The new, exclusive Champagne surface. The dual coated, matt gleaming Champagne surface the Agantis programme with its timeless elegance. The matt gleaming Champagne surface flatters the wood and makes a feature of it. is scratch-resistant and distinguises itself with its high Applications Technical information level of touch insensitivity. It emphasises the high design standards and accentuates the overall colour-coordinated system. 3
Clear lines and forms in combination with perfect workmanship DWD XP Agantis appeals to everyone looking for something special 4
Applications Technical information Dynamic XP drawer runners Dividing systems Drawer Pan drawers System information 5
DWD XP Agantis Programme overview Page Drawers and pan drawers Drawer Drawer side height 95 und 127 mm 8 11 Double-wall metal drawer sides for wooden and steel back walls Wooden back wall holder Front fixing Cover caps Pan drawer with square rail Drawer side height 95 and 127 mm 12 15 Double-wall metal drawer sides for wooden and steel back walls Wooden back wall holder Cover caps Square rail Pan drawer with Agantis Top Drawer side height 95 and 127 mm 16 19 Double-wall metal drawer sides for wooden and steel back walls Wooden back wall holder Cover caps Agantis Top glass holder Glass not included in the scope of delivery Dividing systems Magic Sorto set 20 21 Drawer organising Magic Optima for drawer side heights 95 and 127 mm 22 23 Dividing profile Magic Optima holder Smart Board 6
Page Drawer runners / Tipmatic Plus Dynamic XP 40/60 kg Full-extension 40/60 kg with integrated Soft-close Full-extension 80 kg (upon request) Illustration: Full-extension drawer 40 kg 24 25 System information Tipmatic Plus 40 kg Full-extension 40 kg Opens and closes drawers and pan drawers without handles 26 27 Drawers Pan drawers, assembly aids Front bottom connector Knock-in tool for bottom connectors Drilling jig for front bottom connectors DWD XP spacer DWD XP child lock 28 30 Dividing systems DWD XP Pneumatic mounting clamp DWD XP Drilling jigs DWD XP Marker jig DWD XP Knock-in tool Insertion ram for front fixing Rail drilling jigs Centring drill Screwdriver Screws 31 33 Dynamic XP drawer runners Applications / Technical Information DWD XP sink drawer Optionally with wooden or steel back Foldable steel backs 34 35 Agantis inset drawer Profile and holder for inset front panels Sidewood organising systems For drawers and pan drawers Technical Information 36 37 39 Applications Technical Information 7
DWD XP Agantis drawer H 95 Drawer sides, height 95 mm, front fixings and holder for wooden back wall Modern, linear design Scratch-resistant and touch-insensitive due to dual coating Exclusive matt gleaming Champagne surface Flushly embedded cover caps Bottom fixing with screws or knock-in claws Integrated removal and transport protection Same width of bottom and back Front fixing made of zinc die-casting 2-dimensional front adjustment with cam height adjustment 1 DWD XP Agantis drawer sides H 95 Nominal length in mm Champagne Champagne 275 6120.275.41 6125.275.41 350 6120.350.41 6125.275.41 400 6120.400.41 6125.400.41 450 6120.450.41 6125.450.41 500 6120.500.41 6125.500.41 550 6120.550.41 6125.550.41 650 6120.650.41 - PU/packaging unit PU 1 PU 20 PU 1 = 1 set / drawer sides left and right with cover caps PU 20 = 20 drawer sides left and right in separate boxes, incl. cover caps Nominal length 300 mm on request Imprinted cover caps on request 2 Holder set for wooden back wall H 86 Holder set Champagne Champagne Height 86 6771.41.VE1 6771.41.VE200 PU/Packaging Unit PU 1/100 PU 200 PU 1/100 = 1 set (left / right) per bag / 100 sets per carton PU 200 = 200 sets (left / right) loose in separate cartons Steel back wall upon request 3 Front fixing Front fixing Screw-in 6850.VE400 Plug 6860.VE400 Expanding dowel 6865.VE400 PU/packaging unit PU 400 PU 400 = 400 pcs. loose in carton 8
Fitting dimensions Cutting measurements for 16 mm particle board Inside cabinet width = LW Drawer back width = LW -74 Back wall Back wall width LW -74 68 Back wall height System information min. 49 min. 55 40 16 68 Ø 3,5 x 15 Wood screw Ø 10 x 12 for dowels Bottom width = LW -74 21.5 31 32 Bottom overlay Bottom Bottom width LW -74 Bottom length NL -9 Minimum installation depth = NL NL = Nominal length of runner Drawers Pan drawers Side overlay Assembly instructions: Front fastening with press-in dowels When using front fixings with press-in dowels, the front holes must be appropriately countersunk. The sharp edges produced with hard surface coatings, e.g. melamine, can to some extent cut off the ribs of the dowels as they are pressed in. This can significantly reduce the holding strength. Alternatively, front fixings with expanding dowels can be used, which do not require any countersinking and still guarantee optimal holding strength. Organising systems Drawer with wooden back 2 Holder for wooden back wall 86 mm Dynamic XP drawer runners Dynamic XP 40 kg, see page 24 Dynamic XP 60 kg, see page 24 Dynamic XP Tipmatic Plus 40 kg, see page 26 3 Front fixing 1 For mounting to cabinet side we recommend special Euro screws 191 and 192, see page 33 Drawer sides Agantis H 95 All dimensions in millimetres. Dynamic XP drawer runners page 24 25 Magic Sorto organising system page 20 21 page 31 33 Tipmatic Plus page 26 27 page 28 30 Technical information page 37 39 Applications Technical information 9
DWD XP Agantis drawer H 127 Drawer sides, height 127 mm, front fixings and holder for wooden back wall Modern, linear design Scratch-resistant and touch-insensitive due to dual coating Exclusive matt gleaming Champagne surface Flushly embedded cover caps Bottom fixing with screws or knock-in claws Integrated removal and transport protection Same width of bottom and back Front fixing made of zinc die-casting 2-dimensional front adjustment with cam height adjustment 1 DWD XP Agantis drawer sides H 127 Nominal length in mm Champagne Champagne 400 6220.400.41 6225.400.41 450 6220.450.41 6225.450.41 500 6220.500.41 6225.500.41 550 6220.550.41 6225.550.41 650 6220.650.41 - PU/packaging unit PU 1 PU 20 PU 1 = 1 set / drawer sides left and right with cover caps PU 20 = 20 drawer sides left and right in separate boxes, incl. cover caps Nominal length 300 mm on request Imprinted cover caps on request 2 Holder set for wooden back wall H 118 Holder set Champagne Height 118 6772.41.VE1 PU/packaging unit PU 1/100 PU 1/100 = 1 set (left/right) in plastic bags / 100 set in carton Steel drawet back upon request 3 Front fixing Front fixing Screw-in 6850.VE400 Plug 6860.VE400 Expanding dowel 6865.VE400 PU/packaging unit PU 400 PU 400 = 400 pcs. loose in carton 10
Fitting dimensions Cutting measurements for 16 mm particle board Inside cabinet width = LW Drawer back width = LW -74 Back wall Back wall width LW -74 100 Back wall height System information min. 81 min. 55 40 16 100 Ø 3,5 x 15 Wood screw Ø 10 x 12 for dowels 31 32 Bottom Bottom width LW -74 Bottom length NL -9 Drawers Pan drawers Minimum installation depth = NL NL = Nominal length of runner Bottom width = LW -74 21.5 Side overlay Bottom overlay Assembly instructions: Front fastening with press-in dowels When using front fixings with press-in dowels, the front holes must be appropriately countersunk. The sharp edges produced with hard surface coatings, e.g. melamine, can to some extent cut off the ribs of the dowels as they are pressed in. This can significantly reduce the holding strength. Alternatively, front fixings with expanding dowels can be used, which do not require any countersinking and still guarantee optimal holding strength. Dividing systems Drawer with wooden back wall 2 Holder for wooden back wall height 118 mm Dynamic XP drawer runners Dynamic XP 40 kg, see page 24 Dynamic XP 60 kg, see page 24 Dynamic XP Tipmatic Plus 40 kg, see page 26 3 Front fixing 1 For mounting to cabinet side we recommend special Euro screws 191 and 192, see page 33 Drawer side Agantis H 127 All dimensions in millimetres. Dynamic XP drawer runners page 24 25 Magic Sorto organising system page 20 21 page 31 33 Tipmatic Plus page 26 27 page 28 30 Technical information page 37 39 Applications Technical information 11
DWD XP Agantis pan drawer H 95 with square rail Drawer sides, height 95 mm, front fixings and holder for wooden back wall Modern, linear design Scratch-resistant and touch-insensitive due to dual coating Exclusive matt gleaming Champagne surface Tool-free clip assembly of drawer back Simple adjustment of front inclination Fast, stable connection to the drawer front through screw assembly 1 DWD XP Agantis drawer sides H 95 Nominal length in mm Champagne Champagne 400 6120.400.41 6125.400.41 450 6120.450.41 6125.450.41 500 6120.500.41 6125.500.41 550 6120.550.41 6125.550.41 650 6120.650.41 - PU/packaging unit PU 1 PU 20 PU 1 = 1 set / drawer sides left and right incl. cover caps PU 20 = 20 drawer sides left and right in separate boxes, incl. cover caps Imprinted cover caps on request 2 Holder set for wooden back wall H 182 Holder set Champagne Champagne Height 182 6773.41.VE1 6773.41.VE200 PU/packaging unit PU 1/100 PU 200 PU 1/100 = 1 set (left/right) in plastic bags / 100 set in carton PU 200 = 200 sets (left / right) loose in separate cartons Steel drawer back upon request 3 Front fixing Front fixing Screw-in 6850.VE400 Plug 6860.VE400 Expanding dowel 6865.VE400 PU/packaging unit PU 400 PU 400 = 400 units, loose, boxed 4 Square rail set for screwing-in Nominal length in mm Champagne 400 13170.400.41 450 13170.450.41 500 13170.500.41 550 13170.550.41 650 13170.650.41 PU/packaging unit PU 1/10 PU 1/10 = 1 set in a plastic bag / 25 set in carton 1 set consists of: 2 square rails; 1 set of rail holders rear left/right; 2 front fixing covers; 2 front fixings 12
Fitting dimensions Cutting measurements for 16 mm particle board Inside cabinet width = LW Drawer back width = LW -74 Back wall Back wall width LW -74 164 Back wall height System information min. 150 min. 55 40 12 16 164 Ø 3,5 x 15 Wood screw Ø 10 x 12 for dowels Bottom width = LW -74 21.5 Side overlay 31 32 96 Bottom overlay Bottom Bottom width LW -74 Bottom length NL -9 Minimum installation depth = NL NL = Nominal length of runner Assembly instructions: Front fastening with press-in dowels When using front fixings with press-in dowels, the front holes must be appropriately countersunk. The sharp edges produced with hard surface coatings, e.g. melamine, can to some extent cut off the ribs of the dowels as they are pressed in. This can significantly reduce the holding strength. Alternatively, front fixings with expanding dowels can be used, which do not require any countersinking and still guarantee optimal holding strength. Drawers Pan drawers Dividing systems Pan drawer with wooden back wall and square rail 2 Holder for wooden back wall height 182 mm Inclinination adjustment Dynamic XP drawer runners 4 Square rail set Dynamic XP 40 kg, see page 24 Dynamic XP 60 kg, see page 24 Dynamic XP Tipmatic Plus 40 kg, see page 26 3 Front fixing 1 For mounting to cabinet side we recommend special Euro screws 191 and 192, see page 33 Drawer side Agantis H 95 All dimensions in millimetres. Dynamic XP drawer runners page 24 25 Magic Optima organising system page 22 23 page 31 33 Tipmatic Plus page 26 27 page 28 30 Technical information page 37 39 Applications Technical information 13
DWD XP Agantis pan drawer H 127 with square rail Drawer sides, height 127 mm, front fixings and holder for wooden back wall Modern, linear design Scratch-resistant and touch-insensitive due to dual coating Exclusive matt gleaming Champagne surface Tool-free clip assembly of drawer back Simple adjustment of front inclination Fast, stable connection to the drawer front through screw assembly 1 DWD XP Agantis drawer sides H 127 Nominal length in mm Champagne Champagne 400 6220.400.41 6225.400.41 450 6220.450.41 6225.450.41 500 6220.500.41 6225.500.41 550 6220.550.41 6225.550.41 650 6220.650.41 - PU/packaging unit PU 1 PU 20 PU 1 = 1 set / drawer sides left and right with cover caps PU 20 = 20 decor left and right in separate boxes, incl. cover caps Nominal length 300 mm on request Imprinted cover caps on request 2 Holder set for wooden back wall H 214 Holder set Champagne Champagne Height 214 6774.41.VE1 6774.41.VE200 PU/Packaging Unit PU 1/100 PU 200 PU 1/100 = 1 set (left/right) in plastic bags / 100 set in carton PU 200 = 200 sets (left / right) loose in separate cartons 3 Front fixing Front fixing Screw-in 6850.VE400 Plug 6860.VE400 Expanding dowel 6865.VE400 PU/packaging unit PU 400 PU 400 = 400 pcs. loose in carton 4 Square rail set for screwing-in Nominal length in mm Champagne 400 13170.400.41 450 13170.450.41 500 13170.500.41 550 13170.550.41 650 13170.650.41 PU/packaging unit PU 1/10 PU 1/10 = 1 set in a plastic bag / 25 set in carton 1 set consists of: 2 square rails; 1 set of rail holders rear left/right; 2 front fixing covers; 2 front fixings 14
Fitting dimensions Cutting measurements for 16 mm particle board Inside cabinet width = LW Drawer back width = LW -74 Back wall 196 Back wall height System information 12 Back wall width LW -74 min. 182 min. 55 40 16 196 Ø 3.5 x 15 Wood screw Ø 10 x 12 for dowels Bottom width = LW -74 21.5 Side overlay 31 32 128 Bottom overlay Bottom Bottom width LW -74 Bottom length NL -9 Minimum installation depth = NL NL = Nominal length of runner Assembly instructions: Front fastening with press-in dowels When using front fixings with press-in dowels, the front holes must be appropriately countersunk. The sharp edges produced with hard surface coatings, e.g. melamine, can to some extent cut off the ribs of the dowels as they are pressed in. This can significantly reduce the holding strength. Alternatively, front fixings with expanding dowels can be used, which do not require any countersinking and still guarantee optimal holding strength. Drawers Pan drawers Dividing sytems Pan drawer with wooden back wall and square rail 2 Holder for wooden back wall height 214 mm Inclination adjustment Dynamic XP drawer runners 4 Square rail set Dynamic XP 40 kg, see page 24 Dynamic XP 60 kg, see page 24 Dynamic XP Tipmatic Plus 40 kg, see page 26 3 Front fixing 1 For mounting to cabinet side we recommend special Euro screws 91 and 192, see page 33 Drawer side Agantis H 127 All dimensions in millimetres. Dynamic XP drawer runners page 24 25 Magic Optima organising system page 22 23 page 31 33 Tipmatic Plus page 26 27 page 28 30 Technical information page 37 39 Applications Technical information 15
DWD XP Agantis pan drawer H 95 with Agantis Top glass holder Drawer sides, height 95 mm, front fixings and holder for wooden back wall Modern, linear design Scratch-resistant and touch-insensitive due to dual coating Exclusive matt gleaming Champagne surface Simple adjustment of front inclination Fast, stable connection to the drawer front through screw assembly Precious, valuable glass look (8 mm glass) * Simple fitting and removal * Glass sides not supplied by Grass 1 DWD XP Agantis drawer sides H 95 Nominal length in mm Champagne Champagne 275 6120.275.41 6125.275.41 350 6120.350.41 6125.275.41 400 6120.400.41 6125.400.41 450 6120.450.41 6125.450.41 500 6120.500.41 6125.500.41 550 6120.550.41 6125.550.41 650 6120.650.41 - PU/packaging unit PU 1 PU 20 PU 1 = 1 set / drawer sides left and right with cover caps PU 20 = 20 drawer sides left and right in separate boxes, incl. cover caps Nominal length 300 mm on request Imprinted cover caps on request 2 Holder set for wooden back wall H 182 Holder set Champagne Champagne Height 182 6773.41.VE1 6773.41.VE200 PU/packaging unit PU 1/100 PU 200 PU 1/100 = 1 set (left/right) in a plastic bag / 100 set in carton PU 200 = 200 sets loose in separate cartons Steel back upon request 3 Front fixing Front fixing Screw-in 6850.VE400 Plug 6860.VE400 Expanding dowel 6865.VE400 PU/packaging unit PU 400 PU 400 = 400 pcs. loose in carton 4 Agantis Top glass holder set to screw on Glass holder set item No. Champagne to screw on 14352.35.VE100 PU/packaging unit PU 100 PU 100 = 100 set in carton 1 set consists of: 2 glass holders for clipping on, rear left/right; 2 glass holders for screwing on, front left/right; 4 eccentric screws 16
Fitting dimensions Cutting measurements for 16 mm particle board Inside cabinet width = LW Drawer back width = LW -74 Back wall Back wall width LW -74 164 Back wall height System information min. 150 min. 55 32 40 16 164 Ø 3.5 x 15 Wood screw Ø 10 x 12 for dowels 31 32 96 Bottom Bottom width LW -74 Bottom length NL -9 Minimum installation depth = NL NL = Nominal length of runner Glass cutting (1 x 45 fibre circumferential) NL - 44 Drawers Pan drawers 8 13 13 Bottom width = LW -74 21.5 Bottom overlay ø 6,15 90 = = Dividing systems Side overlay 1 x 45 Pan drawer with wooden back wall and glass top 2 Holder for wooden back wall height 182 mm We recommend ESG glass (single pane safety glass) and refer to national and international safety standards. Inclination adjustment Dynamic XP drawer runners 4 Agantis Top glass holder set Dynamic XP 40 kg, see page 24 Dynamic XP 60 kg, see page 24 Dynamic XP Tipmatic Plus 40 kg, see page 26 3 Front fixing 1 For mounting to cabinet side we recommend special Euro screws 191 and 192 see page 33 Drawer side Agantis H 95 All dimensions in millimetres. Dynamic XP drawer runners page 24 25 Magic Optima organising sytem page 22 23 page 31 33 Tipmatic Plus page 26 27 page 28 30 Technical information page 37 39 Applications Technical information 17
DWD XP Agantis pan drawer H 127 with Agantis Top glass holder Drawer sides height 127 mm, front fixings and holder for wooden back wall Modern, linear design Scratch-resistant and touch-insensitive due to dual coating Exclusive matt gleaming Champagne surface Simple adjustment of front inclination Fast, stable connection to the drawer front through screw assembly Precious, valuable glass look (8 mm glass) * Simple fitting and removal * Glass sides not supplied by Grass 1 DWD XP Agantis drawer sides H 127 Nominal length in mm Champagne Champagne 400 6220.400.41 6225.400.41 450 6220.450.41 6225.450.41 500 6220.500.41 6225.500.41 550 6220.550.41 6225.550.41 650 6220.650.41 - PU/packaging unit PU 1 PU 20 PU 1 = 1 set / drawer sides left and right with cover caps PU 20 = 20 drawer sides left and right in separate boxes, incl. cover caps Nominal length 300 mm on request Imprinted cover caps on request 2 Holder set for wooden back wall H 214 Holder set Champagne Champagne Height 214 6774.41.VE1 6774.41.VE200 PU/Packaging Unit PU 1/100 PU 200 PU 1/100 = 1 set (left/right) in plastic bags / 100 set in carton PU 200 = 200 sets loose in separate cartons 3 Front fixing Front fixing Screw-in 6850.VE400 Plug 6860.VE400 Expanding dowel 6865.VE400 PU/packaging unit PU 400 PU 400 = 400 pcs. loose in carton 4 Agantis Top glass holder set to screw on Glass holder set item No. Champagne to screw on 14352.35.VE100 PU/packaging unit PU 100 PU 100 = 100 set in carton 1 set consists of: 2 glass holders for clipping on, rear left/right; 2 glass holders for screwing on, front left/right; 4 eccentric screws 18
Fitting dimensions Cutting measurements for 16 mm particle board Inside cabinet width = LW Drawer back width = LW -74 Back wall 196 Back wall height System information Back wall width LW -74 min. 182 32 min. 55 40 16 196 Ø 3.5 x 15 Wood screw Ø 10 x 12 for dowels 128 31 32 Bottom Bottom width LW -74 Bottom length NL -9 Minimum installation depth = NL NL = Nominal length of runner Glass cutting (1 x 45 fibre circumferential) NL - 44 8 13 13 Drawers Pan drawers Bottom width = LW -74 21.5 Side overlay Bottom overlay ø 6,15 90 1 x 45 = = Dividing systems Pan drawer with wooden back and glass top 2 Holder for wooden back wall height 214 mm We recommend ESG glass (single pane safety glass) and refer to national and international safety standards. Incline adjustment Dynamic XP drawer runners 4 Agantis Top glass holder set Dynamic XP 40 kg, see page 24 Dynamic XP 60 kg, see page 24 Dynamic XP Tipmatic Plus 40 kg, see page 26 3 Front fixing 1 For mounting to cabinet side we recommend special Euro screws 191 and 192, see page 33 Drawer side Agantis H 127 All dimensions in millimetres. Dynamic XP drawer runners page 24 25 Magic Optima Organising system page 22 23 page 31 33 Tipmatic Plus page 26 27 page 28 30 Technical information page 37 39 Applications Technical information 19
DWD XP Magic Sorto Drawer organising sets Modular, expandable system Individually removable, dishwasher-proof elements Safe for food, hygienically approved Stainless-steel trays, alu metallic divider rail plastic parts in Champagne finish 1 Magic Sorto Set Nominal length in mm Set Item-No. Champagne 500 B3 12030.500.41 500 B4 12040.500.41 500 B4S 12046.500.41 PU/packaging unit PU 1 PU 1 = 1 set in carton B3 Magic Sorto NL 500 and corpus widths from 450 mm. Consisting of: 3 trays 270 x 90 mm 3 trays 180 x 90 mm 1 spacer 270 mm 1 spring-loaded divider rail B4 Magic Sorto NL 500 and corpus widths from 600 mm. Consisting of: 4 trays 270 x 90 mm 4 trays 180 x 90 mm 2 spacers 180 mm 1 spring-loaded divider rail B4S Magic Sorto NL 500 and corpus widths from 600 mm. Consisting of: 1 Schale 450 x 90 mm 3 trays 270 x 90 mm 3 trays 180 x 90 mm 2 spacers 180 mm 1 spring-loaded divider rail 20
Measurements Sorto trays 271,5 90.5 90.5 System information 65.5 181 65 319 362 21.5 90.5 X 41 271.5 Drawers Pan drawers 452.5 65.5 409.5 21.5 X 41 Dividing systems Pan drawer with wooden back and glass top Tray 180 x 90 Spacer Dynamic XP drawer runners Spring-loaded divider rail Tray 270 x 90 Tray 450 x 90 All dimensions in millimetres. and assembly aids Dynamic XP drawers page 08 11 Tipmatic Plus page 26 27 page 31 33 Dynamic XP drawer runners page 24 25 page 28 30 Technical information page 37 39 Applications Technical information 21
DWD XP Agantis Magic Optima Dividing systems for pan drawers, drawer sides, height 95 and 127 mm Individual organisation of the storage space for a clearer and tidier arrangement Fast, tool-free assembly Upgradable at any time Tool-free adjustment, variable of storage space Completely colour-coordinated system 1 Magic Optima dividing profile Divider profile Champagne Cabinet width 1200 for trimming 12800.1052.41 PU/packaging unit PU 10 PU 10 = 10 pcs. wrapped separately in film 2 Magic Optima profile holder for H 95 and 127 Profile holder Champagne for drawer side H 95 12910.35 for drawer side H 127 12920.35 PU/packaging unit PU 2/40 PU 2/40 = 2 sets in a plastic bag / 40 units in carton 3 Magic Optima Smart Board Smart Board Champagne for clipping on 12850.35 PU/packaging unit PU 20 PU 20 = 20 pcs. loose Set packaging on request 22
Cutting measurements for dividing profile Magic Optima Agantis drawer side H 95 Magic Optima Agantis drawer side H 127 Inside cabinet width = LW Inside cabinet width = LW System information X = LW -115 X = LW -115 Drawers Pan drawers Drawer side H 95 Drawer side H 127 Dividing systems 2 Magic Optima profile holder H 95 1 Magic Optima divider profile 2 Magic Optima profile holder H 127 Dynamic XP drawer runners 1 Applications Technical information Magic Optima divider profile 3 Magic Optima Smart Board 3 Magic Optima Smart Board All dimensions in millimetres. and assembly aids DWD XP pan drawers page 12 19 Tipmatic Plus page 26 27 page 31 33 Dynamic XP drawer runners page 24 25 page 28 30 Technical information page 37 39 23
Dynamic XP full-extension drawer runner with integrated Soft-close Synchronised full-extension drawer runner for drawers and pan drawers Integrated Soft-close technology Excellent movement characteristics Low drop values High side stability 40 kg softclose Dynamic XP full-extension drawer runner 40 kg with integrated Soft-close Nominal length in mm 275 6500.275.5 6505.275.5 350 6500.350.5 6505.350.5 400 6500.400.5 6505.400.5 450 6500.450.5 6505.450.5 500 6500.500.5 6505.500.5 550 6500.550.5 6505.550.5 PU/packaging unit PU 1 PU 20 PU 1 = 1 set / full-extension drawer runners, 40 kg, left and right-handed in carton PU 20 = 20 full-extension drawer runners, 40 kg, left and right in separate cartons Nominal length 300 mm on request Synchronised full-extension drawer runner for drawers and pan drawers Integrated Soft-close technology Excellent movement characteristics Low drop values High side stability 60 kg softclose Dynamic XP full-extension drawer runner 60 kg with integrated Soft-close Nominal length in mm 450 6510.450.5 6515.450.5 500 6510.500.5 6515.500.5 550 6510.550.5 6515.550.5 600 6510.600.5 6515.600.5 650 6510.650.5 6515.650.5 PU/packaging unit PU 1 PU 20 PU 1 = 1 set / full-extension drawer runners, 60 kg, left and right-handed in carton PU 20 = 20 full-extension drawer runners, 60 kg, left and right-handed in separate cartons Dynamic XP full-extension drawer runner 80 kg on request. 24
Fixing positions for full-extension 40 kg Front edge of cabinet 2 mm set back 18 9 14 9 10 Special Euro screw Ø 6.3 x 14 mm Particle board screw Ø 3.5 x 15 mm Front edge of cabinet 2 mm set back 18 275 System information 350 400 28 450 Drawers Pan drawers 37 9 500 550 192 224 96 128 37 Dividing systems Fixing positions for full-extension 60 kg Front edge of cabinet 2 mm set back 18 9 14 9 10 Special Euro screw Ø 6.3 x 14 mm Particle board screw Ø 3.5 x 15 mm Front edge of cabinet 2 mm set back 18 450 Dynamic XP drawer runners 500 9 550 28 37 600 650 192 37 224 352 384 For mounting to cabinet side we recommend special Euro screws 191 and 192 see page 33 All dimensions in millimetres. and assembly aids Dynamic XP drawers page 06 09 Tipmatic Plus page 26 27 page 31 33 Dynamic XP pan drawers page 10 17 page 28 30 Techniccal information page 37 39 Applications Technical information 25
Dynamic XP Tipmatic Plus full-extension drawer runner, 40 kg Opens and closes drawers and pan drawers without handles Lightly tap anywhere on the front panel to trigger the opening of the drawer Optimum access to the drawer contents due to fully extended drawer Unique, purely mechanical function Latch function guarantees gentle and secure closing Precise adjustment of the front gap (4 mm) by vertical adjustment on both sides No modification of drawer required Can be used for all cabinet widths and side thicknesses Use standard drilling layout for fitting 1 Dynamic XP Tipmatic Plus full-extension drawer runner, 40 kg tipmatic-plus Nominal length in mm 275 6400.275.5 300 6400.300.5 400 6400.400.5 450 6400.450.5 500 6400.500.5 550 6400.550.5 PU/packaging unit PU 1 PU 1 = 1 set / full-extension drawer runner, 40 kg lh and rh in carton including fitting instructions Dynamic XP Tipmatic Plus drawer runner, 40 kg, NL 500 in PU 5 on request Dynamic XP Tipmatic Plus drawer runner, 60 kg, NL 500, 600, 650 on request 2 Tipmatic Plus locking set Locking set 6440 PU/packaging unit PU 1/20 PU 1/20 = 1 locking set lh/rh and 2 connecting levers per bag, 20 sets per carton 3 Tipmatic Plus connecting rod for cutting to size Connecting rod for cabinet width 1200/S16 6430.1070.5 PU/packaging unit PU 10 PU 10 = 10 connecting rods for cutting to size 4 Front buffers for Tipmatic Plus Front buffer for Tipmatic Plus 68399-42 PU/packaging unit PU 100 PU 100 = 100 pcs. loose in bag 26
Fitting dimensions Mounting positions for cabinet slides Inside cabinet width = LW Drawer back width = LW -74 Special Euro screw Ø 6.3 x 14 mm Particle board screw Ø 3.5 x 15 mm Front edge of cabinet 2 mm set back 18 275 System information min. 49 min. 55 40 16 68 Minimum assembly depth = NL+24 NL = Nominal length Dimension for connecting rod LW - 97 Ø 3,5 x 15 Wood screw Ø 10 x 12 for dowels Bottom width = LW -74 Front buffer Ø 5,2 (Bore hole Ø5) 21.5 Side overlay 0,8 8 31 32 Bottom overlay 96 128 192 224 Min. installation depth = NL +24 Front edge of cabinet 2 mm set back 18 9 14 9 37 350 400 450 500 550 10 Drawers Pan drawers Dividing systems Dynamic XP Tipmatic Plus full-extension drawer runner, 40 kg 2 2 Locking device Connecting lever 28 37 9 Dynamic XP drawer runners 3 Connecting rod 4 Front buffer 1 Dynamic XP Tipmatic Plus, 40 kg We recommend special Euro screws for fixing to the cabinet. All dimensions in millimetres. and assembly aids Dynamic XP drawers page 06 09 Dynamic XP drawer runners page 24 25 page 31 33 Dynamic XP pan drawers page 10 17 page 28 30 Techniccal information page 37 39 Applications Technical information 27
for DWD XP Front-bottom connector For a solid connection between bottom and front. Allows subsequent adjustment of the front panel (horizontally and vertically). Recommended for drawers from cabinet width 800 mm. 26744-09 PU 100 PU/packaging unit 100 = 100 sets x = drawer front overhang Punch Punch for front-bottom connector. 94030 PU 1 PU/packaging unit 1 = 1 piece Dynamic XP drawers page 06 09 Dynamic XP pan drawers page 10 17 Technical information page 37 39 28
Drilling gauge for front bottom connector For drilling the bottom of wide drawers and using the Grass front-bottom connector. 26744-38 PU 1 PU/packaging unit 1 = 1 set System information Drilling jig set for front-bottom connector, consisting of: 1 x drill head 1 x punch 1 x drill bit 15 mm 1 x drill bit 8 mm 1 x hexagonal bit 1 x Allen key 3 mm 1 x Allen key 4 mm Dynamic XP drawer runners Drawers Pan drawers Dividing systems Applications Technical information Use drilling jig for front-bottom connection Drawer bottom drill holes for front-bottom connector Dynamic XP drawers page 06 09 Dynamic XP pan drawers page 10 17 Technical information page 37 39 29
for DWD XP. DWD XP spacer 25 mm For internal drawers behind a door in order to bridge the door gap. Can be installed at left or right. Secure fastening of the Dynamic XP full-extension drawer runners with loadbearing capacity of 40 kg. alu-grey 6975 PU 50 PU/packaging unit 50 = 50 sets 1 set consists of: 1 spacer back and front, 4 special Euro screws Photo for illustration only. 25 DWD XP Child Lock Easy and quick to fit. Concealed at the drawer bottom. Can be deactivated, simple operation. Can be taken off without leaving a trace. alu-grey 6879.VE1 PU 1/100 PU/packaging unit = 1 set in a plastic bag consisting of: child lock, limit stop, screw / 100 sets in carton Dynamic XP drawers page 06 09 Dynamic XP pan drawers page 10 17 Technical information page 37 39 30
for DWD XP DWD XP pneumatic mounting clamp Pneumatic mounting clamp for quick assembly of DWD XP drawers and pan drawers. 6930 PU 1 System information DWD XP cabinet drilling jig A B Application You have two options for fitting the stop: Position A Centre of cabinet slide holes Position B Lower edge of DWD XP drawer side (55 mm below the fixing hole) 94730 PU 1 PU/packaging unit = 1 set PU/packaging unit 1 = 1 pc. in carton Drawers Pan drawers 1 set consists of: 1 runner ruler, 4 stop elements, fitting For all cabinet slides. instructions To be used in the assembled cabinet with min. depth 350 mm. Use Ø 5 mm drill bit for 6 mm Drill bit Ø 5 mm with collar for Euro screws Drill bit Ø 5 mm Dividing systems Euro screws. 92594 0 Position PU 1 PU/packaging unit = 1 piece DWD XP cabinet drilling jig Drilling jig for cabinet slide of Dynamic XP full-extension runners and Dynamic NT. 6926 PU 1 Dynamic XP drawer runners PU/packaging unit 1 = 1 piece Drilling jig XP Tipmatic Plus For Dynamic XP Tipmatic Plus full-extension drawer runners 6923 NL 400 550. PU 1 PU/packaging unit 1 = 1 piece Dynamic XP drawers page 06 09 Dynamic XP pan drawers page 10 17 Technical information page 37 39 NL 550 NL 500 NL 450 NL 400 NL 550 NL 500 NL 450 NL 400 Applications Technical information 31
for DWD XP DWD XP marker jig set Marker jig set for DWD XP front fixing 6850. 6920 PU 1 PU/packaging unit 1 = 1 set DWD XP front drilling jig Front drilling jig for DWD XP front fixing, railings and add-on systems. 6925 PU 1 PU/packaging unit 1 = 1 piece DWD XP knock-in tool Knock-in tool for DWD XP front fixing with dowels 6860. 6910 PU 1 PU/packaging unit 1 = 1 piece Insertion ram Insertion ram for DWD XP dowels front fixing 6860 with Ecoflex drilling and insertion jig. 6915 PU 1 PU/packaging unit 1 = 1 piece Dynamic XP drawers page 06 09 Dynamic XP pan drawers page 10 17 Technical information page 37 39 32
DWD XP drilling jig for railing Drilling jig for DWD XP railing. 6927 PU 1 PU/packaging unit 1 = 1 piece System information Centring drill bit Ø 3,5 mm Centring drill bit for predrilling countersink particle board screws Ø 3.5 mm. 35692 PU 1 Drawers Pan drawers PU/packaging unit 1 = 1 piece Spare drill bit 90561 PU 1 PU/packaging unit 1 = 1 piece Dividing systems Screw driver Grass crosshead screwdriver (Pozidrive No. 2). 10256-00 PU 1 PU/packaging unit 1 = 1 piece Dynamic XP drawer runners Euro screw, nickel-plated Wood screw, nickel-plated /Ø 6.3 x 10.5 mm /Ø 6.3 x 14 mm 191 192 PU 1000 PU/packaging unit 1000 = 1000 pieces /Ø 3.5 x 15 mm 198 PU 1 PU/packaging unit 1000 = 1000 pieces Ø 6.3 Ø 3.5 Länge Ø 7.1 15 Ø 7 Dynamic XP drawers page 06 09 Dynamic XP pan drawers page 10 17 Technical information page 37 39 Applications Technical information 33
DWD XP sink drawer Application example. Easy assembly with DWD XP standard products Variable width, variable cut As drawer or pan drawer All dividing systems fit Foldable steel back walls for sink cabinets. Widths 600, 800, 900 and 1200 on request. Photo DWD Dynamic XP for illustration only. Sink drawer application example Square rail NL 500 DWD XP drawer side NL 275-400 Wooden back wall, variable width (steel back wall from cabinet width 250) Holder for high wooden back wall H182 DWD XP Agantis drawer side H 95 NL 500 Dynamic XP full-extension drawer runner, 60 kg Inset drawer front Front panel Front fixing 34
Fitting dimensions Inside cabinet width = LW B = E +31 A = D +31 Wooden back wall width = E Wooden back wall width = D System information min. 150 min. 55 40 12 16 164 32 15 Ø 3,5 x 15 Wood screw Ø 10 x 12 for dowels 96 31 32 Drawers Pan drawers Bottom width = LW -74 Side overlay 21.5 Bottom overlay Dividing systems Cutting dimensions for inside front 15 min. 73 32 21.5 E (variable dimension) Bore hole centre distance (Inside front) = LW - 43 - A - B 21.5 D (variable dimension) Dynamic XP drawer runners Cut out measurement = NL - 9 Interior front Bottom length = NL -9 Bottom Bottom width = LW -74 All dimensions in millimetres. Dynamic XP drawers page 06 09 Dynamic XP pan drawers page 10 17 Technical information page 37 39 Applications Technical information 35
Application examples Ideally supplemented Sidewood Flexline and Sidewood push-in systems The flexible solid wood organising systems Solid wood looks good with Flexline, the new Sidewood organising system. The organising system adjusts to any cabinet width and can be individually equipped with many useful utensils: cutlery, knives, spices and cling film as well as the Magic Sorto stainless steel trays all find their place. The push-in system for individually designing your pan drawers. This innovative push-in system impresses with its user friendliness. Adjustable perforated plates enable you to arrange your system to suit non-standard dimensions. Flexible arrangement of the different elements creates an individual configuration. Please see the Sidewood brochure for further information. Agantis inset front panels The Agantis XP system can be supplemented with the elegant Ninka inset front panels The colour-coordinated Ninka inset front panels for drawer heights of 95 and 127 mm complete the system and continue the clean lines of the Agantis XP series. 36
Technical information for DWD-Dynamic-XP Inserting the drawer Removing the drawer Dividing systems System information Place drawer onto extended slides. Raise drawer slightly at the front and push fully home. The drawer will be locked into place automatically! Open drawer to about 10 cm before full-extension and raise slightly. Pull out sharply HORIZONTALLY until the drawer audibly disengages and then lift off. Drawers Pan drawers Fitting the drawer front Side adjustment Removing the drawer front Click. Insert front holder into drawer sides. Drawer front snaps shut automatically and is fixed. Turn screw (A). Due to the integrated lateral adjustment only the rh side has to be adjusted. Use Pozi No. 2 screwdriver to release locking mechanism. Drawer front is unlocked and can be removed. Release front-bottom connector if applicable. Dynamic XP drawer runners Vertical cam adjustment Fitting instructions Expanding dowel Ø 10 x 12 mm Press-in dowel Ø 10 x 12 mm Front fastening with press-in dowels Loosen adjustment screw on both sides. Applications Technical information Adjust drawer front and tighten screws again. When using front fixings with press-in dowels, the holes in the front should be appropriately countersunk. The sharp edges produced when drilling into hard surface coatings, e.g. melamine, can damage some of the dowel ribs when they are pressed in. This can significantly reduce the holding strength. Alternatively, front fixings with expanding dowels can be used, this does not require any countersinking and still guarantees optimum holding strength. 37
Agantis_EN.QXP:Layout 1 04.08.2008 14:55 Uhr Seite 38 Technical information for DWD-Dynamic-XP. Agantis square rail assembly Disassembly Agantis Top glass holder assembly Rail front adjustment Agantis Top glass holder disassembly Glass holder adjustment Adjust eccentric screw on both sides. 38
40 kg total weight 60 / 80 kg Durability test 100,000 open/close cycles 60,000 open/close cycles System information kg kg kg kg Vertical load test 5 x 5 seconds, 2/3 extended, additional load on corner: 175 N 5 x 5 seconds, 2/3 extended, additional load on corner: 200 N Drawer Pan Drawers kg kg kg kg Horizontal load test Dividing systems 5 x 5 seconds, 2/3 extended, right/left alternating 5 x 5 seconds, 2/3 extended, right/left alternating kg kg kg kg Dynamic XP drawer runners Dynamic load on front panels and limit stops open and close 10 x at 0.6 metre/sec open and close 10 x at 0.55 metre/sec with 60 kg load open and close 10 x at 0.45 metre/sec with 80 kg load kg kg kg kg Pull-out safety Applications Technical information open 10 x at 1.0 metre/sec Requirements and limits according to internal guidelines Stated loads apply up to nominal length of 500 mm Loading reduces with increasing nominal length open 10 x at 0.85 metre/sec with 60 kg load open 10 x at 0.75 metre/sec with 80 kg load 39
Grass GmbH Furniture fittings Grass Platz 1 6973 Höchst Austria Tel. +43 / 5578 / 701-0 Fax +43 / 5578 / 701-59 www.grass.at, info@grass.at F147071182000 08/08 2.000 (ENG) GRASS Advertising Subject to changes, no liability for printing errors accepted