SHED PACK Step 1: Choose your shed type. Industrial Shed Open FarmShed Shed Pack / Types of Sheds Drawing # S0104.A001 Hanger Shed
=DISCLAIMER= Please read and agree to Purlin Brackets Terms and Conditions before purchasing if you don t agree to the following Terms and Conditions please do not purchase this product. Terms and conditions Legal Disclaimer Please read before purchasing Purlin Brackets is not responsible for, and expressly disclaims all liability for injury, loss of life or damages of any kind arising out of use, reference to, or reliance on any information contained within the Purlin Brackets Web Site, Purlin Brackets Ebay Site and Purlin Brackets Documentation supplied with Purlin Brackets Shed Sets. While the information contained within the Purlin Brackets Web Site, Purlin Brackets Ebay Site and Purlin Brackets Documentation supplied with Purlin Brackets Shed Sets is periodically updated, no guarantee is given that the information provided in Purlin Brackets Web Site, Purlin Brackets Ebay Site and Purlin Brackets Documentation supplied with Purlin Brackets Shed Sets is correct, complete, and up-to-date. Purlin Brackets only offers this information contained in Purlin Brackets Web Site, Purlin Brackets Ebay Site and Purlin Brackets Documentation supplied with Purlin Brackets Shed Sets as a guide only reference taken directly from the Australian Standards. Purlin Brackets strictly recommends any information followed by Purlin Brackets Web Site, Purlin Brackets Ebay Site and Purlin Brackets Documentation supplied with Purlin Brackets Shed Sets to be checked and authorized by a fully qualified Engineer and must meet the planning and building approval process of local law applications. Purlin Brackets takes no responsibility for the physical building processes and applications of the information contained in Purlin Brackets Web Site, Purlin Brackets Ebay Site and Purlin Brackets Documentation supplied with Purlin Brackets Shed Sets. Purlin Brackets strictly recommends a qualified Builder to be appointed for the Supervision and Responsibility of assembly of Purlin Brackets Shed Sets. Shed Pack / Types of Sheds Drawing # S0104.B001
Overview Page Step 2: Choose either pad footing layout or strip footing concrete slab layout. Step 3: Choose your shed width, wall height, shed length and roof pitch. (5, 11, 15 or 22.5 ) Top Hat Spacing Pad Footing Layout Shed Width Mullion Spacing Roof Pitch Step 4: Choose your portal frame spacing. a) Standard Single Portal Frames -3 metre spacing, C150mm or C200mm. or; b) Back to Back Portal Frames -4 metre spacing, C200mm only. -5 metre spacing, C200mm only. Step 5: Choose your wall cladding and roof cladding profile types. Apex Height Wall Height Girt Spacing 0 Average Height Ground Level Portal Frame Spacing Pad Footing Layout Shed Frame Front View Pad Footing Layout Strip Footing Concrete Slab Layout Shed Width Top Hat Spacing Mullion Spacing Roof Pitch Shed Length Portal Frame Spacing Apex Height Wall Height Girt Spacing 0 Average Height Ground Level Shed Pack / Overview Page Drawing # S0104.C001 Shed Frame Plan View Strip Footing Concrete Slab Layout Shed Frame Front View Strip Footing Concrete Slab Layout
3m Portal Frame Spacing Purlin Bracket Set *Engineering certification is compliant in wind region A, B, C and D. **Suitable for 6" (150mm) and 8" (200mm) C section. Each portal frame assembly is shipped with the following components 1x Apex Bracket, 3mm galvanised steel sheet, G450 - Z350 2x Haunch Bracket, 3mm galvanised steel sheet, G450 - Z350 2x Footing Plate, 3mm galvanised steel sheet, G450 - Z350 28x M16x40mm 8.8 grade structural bolt, galvanised 28x M16 8.8 structural nut, galvanised 56x M16 8.8 structural washer, galvanised 4x M16x105mm Claw Wedge Masonary Anchor, galvanised 4m & 5m Portal Frame Spacing Purlin Bracket Set *Engineering certification is compliant in wind region A and B only. **Suitable for 8" (200mm) C section only. Each portal frame assembly is shipped with the following components 2x Apex Bracket, 3mm galvanised steel sheet, G450 - Z350 4x Haunch Bracket, 3mm galvanised steel sheet, G450 - Z350 4x Footing Plate, 3mm galvanised steel sheet, G450 - Z350 28x M16x40mm 8.8 grade structural bolt, galvanised 28x M16 8.8 structural nut, galvanised 56x M16 8.8 structural washer, galvanised 4x M16x105mm Claw Wedge Masonary Anchor, galvanised *BOLTS INCLUDED IN SET M16x105mm Claw Wedge Masonary Anchor, galvanised M16x40mm 8.8 Structural Assembly, galvanised M16x40mm 8.8 grade structural bolt, galvanised M16 8.8 structural washer, galvanised M16 8.8 structural washer, galvanised M16 8.8 structural nut, galvanised *SCREWS TO BE SOURCED BY CUSTOMER Shed Pack / Overview Page 14g-10x25mm Hex Head Needle Point Class 4 use when screwing to metal 0.42 to 1.5mm in thickness Drawing # S0104.D001 SDM 14-10x50mm HEX BRA Cyclonic Roof Cladding Screw / Cyclonic Washer 12-14x45mm Class 4 Standard Roof Cladding Screw 14g-10x25mm Hex Head SDS Class 4 use when screwing to metal 1.5 to 4.0mm in thickness
Ridge Cap Gutters Roof Cladding Barge Flashing 3D Open Farm Shed & 3D Industrial Shed Perspective View C Door Option 3 D3: End Wall End Wall or Gable Wall Apex Brace Purlin Rafter Top Hat Batten Side Wall Girt Girt Gutter Bracket C Section Gutter Girt Header Perspective View C Hidden Cladding Column Mullion Haunch Brace End Wall Girt Wind Brace Roller Door Jamb Contact: Sam Phone: 0409 023 494 Email:tisam2@yahoo.com.au Open Farm Shed & Industrial Shed 3D Internal Frame Diagram Drawing # S0104.E001 *Example shed only to represent components.
Door Option 4 D4: End Wall Ridge Cap Gutters Roof Cladding 3D Hanger Shed Barge Flashing Apex Brace Purlin Rafter Side Wall or Gutter Wall Perspective View C Top Hat Batten Girt Gutter Bracket C Section Gutter Girt Side Wall Girt Haunch Brace Hanger Shed 3D Internal Frame Diagram Drawing # S0104.E002 Perspective View C Hidden Cladding *Example shed only to represent components. Column
Pad Footing, Open Farm Shed & Pad Footing, Industrial Shed Shed Perspective View Roof Pitch Apex Height Wall Height Shed Length Portal Frame Spacing More portal frames may be added as per span table Optional Door Shed Top View (Hidden Cladding) Shed Width Top Hat Spacing Mullion Spacing Girt Spacing 0 Average Height Ground Level *Bitumen damp course between footing plate and concrete. Open Farm Shed & Industrial Shed Pad Footing Layout Drawing # S0104.F001 Date Drawn: 28.10.2012 Shed Front View (Hidden Cladding) Pad Dimension, View x3 Footing Type: Pad Footing Concrete Type: 25MPa Reinforcement: Refer to table
Pad Footing, Hanger Shed Shed Perspective View Roof Pitch Apex Height Wall Height Shed Length Portal Frame Spacing More portal frames may be added as per span table Shed Top View (Hidden Cladding) Shed Width Top Hat Spacing Mullion Spacing Girt Spacing Shed Front View (Hidden Cladding) 0 Average Height Ground Level Pad Dimension, View x3 Footing Type: Pad Footing Concrete Type: 25MPa Reinforcement: Refer to table *Bitumen damp course between footing plate and concrete. Hanger Shed Pad Footing Layout Drawing # S0104.F002 Date Drawn: 28.10.2012
Strip Footing, Open Farm Shed & Strip Footing, Industrial Shed A More portal frames may be added as per span table Shed Length Portal Frame Spacing 1xSaw Cut Each Way every 3000 to 4500mm within 24-36hr of concrete pour Optional Doors Shed Top View (Hidden Cladding) Shed Width Shed Perspective View Front face only can be open with no mullions Top Hat Spacing Mullion Spacing Roof Pitch Refer to table *Bitumen damp course between footing plate and concrete. Apex Height Wall Height Girt Spacing 0 Average Height Ground Level 30 Section A:A, View x6, Soil Class: S, M or H1 Footing Type: Slab/Strip Footing Concrete Type: 25MPa Reinforcement: Trench Mesh, *Refer to table Slab: SL82 Top only Vapour Barrier: 0.2mm Polyethylene Sheet Open Farm Shed & Industrial Shed Strip Footing Slab Layout Drawing # S0104.G001 Date Drawn: 28.10.2012 Shed Front View (Hidden Cladding)
Strip Footing, Hanger Shed A More portal frames may be added as per span table Shed Length Portal Frame Spacing 1xSaw Cut Each Way every 3000 to 4500mm within 24-36hr of concrete pour Shed Top View (Hidden Cladding) Shed Width Shed Perspective View Top Hat Spacing Mullion Spacing Roof Pitch Refer to table *Bitumen damp course between footing plate and concrete. Apex Height Wall Height Girt Spacing 0 Average Height Ground Level 30 Section A:A, View x6, Soil Class: S, M or H1 Footing Type: Slab/Strip Footing Concrete Type: 25MPa Reinforcement: Trench Mesh, *Refer to table Slab: SL82 Top only Vapour Barrier: 0.2mm Polyethylene Sheet Hanger Shed Strip Footing Slab Layout Drawing # S0104.G002 Date Drawn: 28.10.2012 Shed Front View (Hidden Cladding)
51 *For all details on fixings and fasteners please refer to: S0104.H001 and relevant Wind Region Design Ruirements C100 64 End wall Girt Bracket Angle 50x50x1.6mm 100mm Long 4x Tek Screw 4x Tek Screw, Connect to Purlin Rafter 300mm Critical Structural Laps, Wall Girts and Top Hat Battens Must Overlap 300mm 4x Tek Screw, 25mm in from each edge Apex Bracket & Haunch Bracket 8x M16x40mm 8.8 Structural Assembly, galvanised Roof Cladding: Screw every 2nd Rib at Sheet Ends Otherwise screw every 3rd Rib C150 76 Perspective View C 50 Ɵ C200 76 Wind Bracing must be over Top Hat Batten and Wall Girts. qty= Cross brace to 30% per roof plane Ridge Cap Flashing (match roof pitch angle) Tek screw every 500mm, each side 75 25 Gutter Overhang Barge and Wall Flashing Tek screw every 500mm, top and side Wall Cladding: Screw every valley C250 96 Wind Bracing must be over Top Hat Batten and Wall Girts. qty= Cross brace to 30% per wall C300 64 Z150 61 Mullion Bracket 87x76x3mm 150mm Long 4x M16x40mm 8.8 Structural Assembly, galvanised Roller Door Jamb, Z150 Notch where ruired for: header, brackets, braces, purlins and footing plates. Tek screw to column every 300mm Perspective View C Hidden Cladding Girt Gutter Bracket 2x Tek Screw Contact: Sam Phone: 0409 023 494 Email:tisam2@yahoo.com.au Open Farm Shed & Industrial Shed 3D Connection Diagram Drawing # S0104.H001 TH64 TH75 TH96 Door Jamb, Footing Plate Angle 50x50x3mm 50mm Long. 1x Dynabolt M10x70mm. 2x Tek screw Footing Plate 2x M16x105mm Claw Wedge Masonary Anchor, galvanised 2x M16x40mm 8.8 Structural Assembly, galvanised *Example shed only to represent components. End of Purlin or Wall Girt 2x Tek Screw Wrap Wind Brace around members 4x Tek Screw Pack end wall Girts with structural ply, or for greater thickness, use non-compressive material. Alternatively increase Girt top hat size. 2x Tek Screw
51 *For all details on fixings and fasteners please refer to: S0104.H001 and relevant Wind Region Design Ruirements C100 64 End wall Girt Bracket Angle 50x50x1.6mm 100mm Long 4x Tek Screw 4x Tek Screw, Connect to Purlin Rafter 300mm Critical Structural Laps, Wall Girts and Top Hat Battens Must Overlap 300mm 4x Tek Screw, 25mm in from each edge Apex Bracket & Haunch Bracket 8x M16x40mm 8.8 Structural Assembly, galvanised Roof Cladding: Screw every 2nd Rib at Sheet Ends Otherwise screw every 3rd Rib C150 76 Perspective View C 50 Ɵ C200 76 Wind Bracing must be over Top Hat Batten and Wall Girts. qty= Cross brace to 30% per roof plane Ridge Cap Flashing (match roof pitch angle) Tek screw every 500mm, each side 75 25 Gutter Overhang Barge and Wall Flashing Tek screw every 500mm, top and side Wall Cladding: Screw every valley C250 96 Wind Bracing must be over Top Hat Batten and Wall Girts. qty= 1 cross brace per wall C300 61 Mullion Bracket 87x76x3mm 150mm Long 4x M16x40mm 8.8 Structural Assembly, galvanised Wind Bracing must be over Top Hat Batten and Wall Girts. qty= Cross brace to 30% per wall Girt Gutter Bracket 2x Tek Screw 64 Z150 4x Tek Screw, Connect to Column 4x Tek Screw, 25mm in from each edge Perspective View C Hidden Cladding Hanger Shed 3D Connection Diagram Drawing # S0104.H002 TH64 Side Wall Girts, Must Overlap 300mm TH75 TH96 *Example shed only to represent components.
Single end wall portal frames - 3m spacings Single Rafters **Suitable for 150mm/6" and 200mm/8" C Section 1x Apex Bracket 8x Structural Assembly Single Mullions Single Columns 1x Haunch Bracket 1x Compact Gutter Girt (optional) 8x Structural Assembly Optional: Compact Gutter Girt Bracket Contact: Sam Phone: 0409 023 494 Email:tisam2@yahoo.com.au Single Portal Frame, with Mullions Drawing # S0104.I001 1x Footing Plate 2x Structural Assembly 2x Masonry Anchor 1x Mullion Footing Plate 2x Structural Assembly 2x Masonry Anchor SHEET 1 of 1
Single internal portal frames - 3m spacings Single Rafters **Suitable for 150mm/6" and 200mm/8" C Section 1x Apex Bracket 8x Structural Assembly Single Columns 1x Haunch Bracket 1x Compact Gutter Girt (optional) 8x Structural Assembly Optional: Compact Gutter Girt Bracket Single Portal Frame, no Mullions Drawing # S0104.I002 1x Footing Plate 2x Structural Assembly 2x Masonry Anchor SHEET 1 of 1
Back to back end wall portal frames - 4m & 5m spacings **ONLY 200mm/8" C Section can be used for back to back portal frames Double Apex Brace 1x Universal Mullion Bracket Single Mullions 2x Apex Bracket 8x Structural Assembly 2x Haunch Bracket 1x Compact Gutter Girt (optional) 8x Structural Bolt Assembly Optional: Compact Gutter Girt Bracket Double Rafters Double Haunch Brace Double Portal Frame, with Mullions Drawing # S0104.J001 2x Internal Footing Plate 3mm 2x Structural Bolt Assembly 2x Masonry Anchor - Exploded 1x Mullion Footing Plate view x2 2x Structural Bolt Assembly 2x Masonry Anchor Double Columns
Back to back internal portal frames - 4m & 5m spacings **ONLY 200mm/8" C Section can be used for back to back portal frames Double Apex Brace 2x Apex Bracket 8x Structural Assembly Optional: Compact Gutter Girt Bracket 2x Haunch Bracket 1x Compact Gutter Girt (optional) 8x Structural Bolt Assembly Double Rafters Double Haunch Brace Double Portal Frame, no Mullions Drawing # S0104.J002 2x Internal Footing Plate 3mm 2x Structural Bolt Assembly 2x Masonry Anchor - Exploded view x2 Double Columns
Open Farm Shed & Industrial Shed -Roller Door Frame E E View x10 C Section Z Section D Z Section A B C Top View Section D View x10 C Section C Section C Section Open Farm Shed & Industrial Shed Door Assembly detail Drawing # S0104.K001 Z Section Z Section Z Section Z Section SHEET 1 of 1 A View x10 B View x10 C View x10 C Section
Customised Portal Frame Layout Once you have purchased a shed set you will be supplied the following customised information. Contact: Sam Phone: 0409 023 494 Email:tisam2@yahoo.com.au Customised Portal Frame Layout Portal Frame Dimensions Punching Profile Drawing # S0104.L001 SHEET 1 of 1