Product description New series is a general current vector control inverter integrated with the performance and features in a high degree. with industry-leading drive performance and functionality control, using unique current vector control algorithm can efficiently drive induction motor to achieve high accuracy, high torque and high-performance control. Customer success, Market Service! in terms of performance and control are worthy of trust! At a glance Advanced motor control technology support both Open loop vector control(svc), Closed loop vector control(fvc) and V/F control Different input voltage(0v single phase/0v phase/80v phase/460v phase) High starting torque characteristics and precise speed control Rich and flexible I/O accesses and field bus options Additional information Product description...-0 At a glance... -0 Customer benefits...-0 Specificaiton... -0 Specificaiton... -0 Specificaiton... -04 Model Definition...-05 Model Definition...-06 Model Definition...-0 Dimensional Drawing... -08 Dimensional Drawing... -09 Dimensional Drawing... -0 Dimensional Drawing... - Connection Diagram... - Customer benefits Suitable for all regions which have different grid and voltage Upgrade I/O(NPN/PNP compatible) can meet more application requirement without controller(plc) like elevator, textile etc. Programmable DI/DO/AI/AO as well as RS485 Modbus RU make easy communication with other devices www.hncelectric.com/ For more information, please enter the link or scan the code via mobile devices and get direct access to technical date,manual,application examples and much more. -0 www.hncelectric.com
Specificaiton Items Description Control system Drive performance Maximum frequency Carrier frequency Input frequency resolution Control mode Startuptorque High performance of current vector control technology to realize asynchronous motor and synchronous motor control High efficiency driving for induction motor and synchronous motor Vector control:0~00hzv/fcontrol:0~00hz 0.5k~6kHz; the carrier frequency will be automatically adjusted according to the load characteristics Digital setting: 0.0Hz Analog setting: maximum frequency 0.05% Open loop vector control(svc) Closed loop vector control(fvc) V/F control ype G:0.5Hz/50%(SVC);0Hz/80%(FVC) Speed range :00(SVC) Speed range Speed stabilizing precision orque control precision ±0.5%(SVC) ±5%(FVC) Speed stabilizing precision Basic function Over load capability orque boost V/F curve V/F separation Acc. /deccurve DC brake Jog control Simple PLC and MS speed running Built-in PID Auto voltage regulation (AVR) Over-voltage/current stall control Quick current limit G type: rated current 50% - minute, rated current 80% - seconds; Auto torque boost function;manual torque boost 0.%~0.0% Linear V/F,Multi-point V/F and Square V/F curve (power of.,.4,.6,.8, ) In ways:separation,semi seperation Straight line or S curve acceleration and deceleration mode. Four kinds of acceleration and deceleration time. Acceleration and deceleration time range between 0.0s to 6500.0s DC brake frequency:0.00hz to maximum frequency,brake time:0.0s to 6.0s, and brake current value: 0.0% to 00.0%. Jog frequency range:0.00hz~50.00hz. Jog acceleration/deceleration time 0.0s~6500.0s. It can realize at maximum of 6 segments speed running via the built-in PLC or control terminal. It is easy to realize process-controlled close loop control system It can keep constant output voltage automatically in case of change of network voltage. It can limit the running voltage/current automatically and prevent frequent over-voltage/current tripping duringthe running process Minimize the over-current fault,protect normal operation of the inverter www.hncelectric.com -0
Items Description orque limit & control "Excavators" characteristics,automatically limit torque during operation,prevent frequent overcurrent trip; Closed loop vector mode can realize the torque control. Instantaneous stop non-stop When instantaneous power off,voltage reduction is compensated through load feedback energy,which could make inverter keep running in a short period of time. Rapid current limit o avoid inverter frequent over-current fault. Virtual I/O 5 groups of virtual DI,DO to realize simple logic control Personalized iming control Multiple motor switch Multi-threaded bus support iming control function:settimerange 0 Min~6500.0Min 4 groups of motor parameter,which can realize 4- motor switch control Support kinds of field bus: RS485, Profibus-DP, CANopen Motor overheat protection Z5PC analog input AIx can accept the motor temperature sensor input(p00 P000) Multi-encoder support Programmable PLC Support difference,open collector, UVW, rotary transformer, sine cosine encoder etc. Select optional user programmable card,which can realize secondary development,programming mode compatible with Drino PLC. Excellent backend software Support inverter parameter operation and virtual oscilloscope function.inverter internal state graphic monitor can be realized through virtual oscilloscope. Running command channel hree types of channels: operationpanel reference,control terminal reference and serial communication portreference.hese channels can be switched in various modes. Frequency source here are totally eleven types of frequency sources, such as digital reference, analog voltage reference, analog current reference, pulse reference, MS speed, PLC, PID and serial port reference. Running Auxiliary frequency source kinds of auxiliary frequency source which can flexible achieve auxiliary frequency tuning, frequency synthesis Standard: here are 6 digital input terminals,di5 can be used as00khz high-speed pulse input. Input terminal analog input terminals which can be used as 0-0V voltage input or 0~0mA current input. Extended function: 4 digital input terminals, analog input terminals support-0~0v voltage input &P00\P00-0 www.hncelectric.com
Items Description Standard: digital output terminals, Y is high-speed pulse output terminal (can be choosen as open circuit collector type), support 0~0kHz square wave signal; relay output terminal; Output terminal analog output terminals, support 0~0mA output current or 0~0V output voltage; Extended function: digital output terminal;; analog output terminal, support 0~0mA output current or 0~0V output voltage. LED display Realize parameter setting,status monitoring function Keyboard potentiometer Equipped with keyboard potentiometer or coding potentiometer Key lock&function selection Realize button locking,define operation range for part of buttons to prevent operation fault. Keyboard operation Protection function It can implement power-on motor short-circuit detection,input/output phase loss protection, over current protection,over voltage protection,under voltage protection,overheating protection and overload protection. Optional parts LCD operation panel, brake component, multifunction extended card (.IO extended card.user programmable card), RS485 communication card, Profibus-DP communication card, CANopen communication card, differential input PG card, UVW differential input PG card, rotating inverter PG card, OC input PG card. Using place Indoor,and befree from direct sunlight,dust, corrosive gas, combustible gas,oilsmoke, vapor,driporsalt. Altitude Below 000m Environment Ambient temperature -0 to +40 (Derating use when under ambient temperature of 40 to 50 ) Humidity Less than 95%RH, without condensing Vibration Less than 5.9 m/s (0.6g) Storage temperature -0 ~+60 www.hncelectric.com -04
Model Definition HV 590 - R5 G Code Voltage HV 590 Series Inverter G single phase 0V G phase 0V NO. Adaptation G phase 80V R5 0.5kW G4 phase 480V R5.5kW 0 kw No. Inverter ype 08 8.5kW G General type 0 0kW P Fanpump type 400 400kW Frequency Inverter Model (kw) Motor adaper PH single phase input :AC 0V,50/60HZ HP Rated Input (A) Rated Output (A) -R40G 0.4 0.5 5.9.5 -R5G 0.5 8. 4 -R5G.5 4. -RG. 4. 0 PH - phase input :AC 0V,50/60HZ -R40G 0.4 0.5 4..5 -R5G -R5G -RG -004G -5R5G 0.5.5. 4.0.5 5. 8.0.8 8. 8.0 4 0 6 5 -R5G.5 0. -0G -05G -08G -0G -00G -0G -045G 5 8.5 0 45 5 0 5 0 40 50 60 49.8 65.4 8.6 9.. 5.4 85. 45 60 5 90 0 5 6-055G 55 0 5.8 0 PH - phase input :AC 80V,50/60HZ -R5G 0.5 4..5 -R5G.5 5.. -RG. 6.0 5-004G 4.0 5 0.5 8.5-05 www.hncelectric.com
www.hncelectric.com -06-5R5G -R5G -0G -05G -00G -0G -045G -055G -05G -09G -0G -G -60G -8G -00G -0G -50G -80G -450G -500G.5.0 5.0 0 45 55 5 90 0 60 85 00 0 50 80 55 400.5 0 5 0 0 40 50 60 0 00 5 50 5 0 45 60 00 50 0 40 50 0.5.5. 49. 65. 80.6 96.4.6 66.4 84. 6.8 68.. 68 406.6 44. 50 555.9 4.5 8.6 Frequency Inverter Model Rated Input (A) Rated Output (A) 450 500 595 60 846.0 885.0 Motor adaper (kw) HP 6 5 45 60 5 90 0 50 0 0 50 00 40 80 45 40 50 650 5 80 860-0G -55G -400G 560 60 50 840 990.0 50 950 00-560G -60G -08G -5G PH - phase input :AC 460V,50/60HZ -RG4-004G4 4. 4.9 5. 9.4.5. 5 8 -R5G4 -R5G4-5R5G4 -R5G4-0G4-05G4-00G4-0G4.5 8.. 9.8 4. 5.4 66.5 5 40 55 65-0G4-08G4 8.5 5 5 500 4.9 650. 8 600.5. 4.0 0.5.5.0 5.0 0 8.5 5.5 0 5 0 0 40 50 5 5. 4
Frequency Inverter Model -045G4-055G4-05G4-09G4-0G4 -G4-60G4-8G4-00G4-0G4-50G4-80G4-5G4-55G4-400G4-450G4-500G4-560G4-60G4 (kw) 45 55 5 90 0 60 85 00 0 50 80 5 55 400 450 500 560 60 Motor adaper HP 60 0 00 5 50 5 0 45 60 00 50 0 Rated Input (A) 8. 0.9.4 5.8 6.0 0. 64. 09.4 4.4 6.9 40.9 45.4 500 5. 40 50 595 60 50 840 6. 06.9 60.0 865.0 90.0 00 Rated Output (A) 80 00 0 4 80 6 59 00 8 58 400 449 56 50 650 00 800 900 000-0 www.hncelectric.com
Dimensional Drawing Product Component Name Dust guard Mounting hole Mounting hole Upper cover Heatsin k Cooling fan Operation panel Nameplate Operationpanel Enclosure Lower cover Nameplate Cover R40G/G~-RG/G -R5G and below power class -0G and above power class Product Outline, Mounting Dimension, and Weight 0R4G~ RG R5G~-R5G and blow power class -0G~-0G power class Product outline and mounting dimension -85G~-400G 5 0.00 + PRG S E M F RUN JOG SOP RS Operation panel outline and mounting dimension www.hncelectric.com -08
Shape DIM -R40G -R5G -R5G -RG -R40G -R5G -R5G -RG -004G -5R5G -R5G -0G -05G -08G -0G -00G -0G -045G -055G -R5G -R5G -RG -004G -5R5G -R5G -0G -05G -08G -0G -00G -0G -045G -055G -05G -090G -0G Wall mounting -G -60G -85G Shape Dimension And Installation Dimension(mm) W H D H W D Assemblyaperture weight (kg) 8.5 85 59 06.5 4.5 50. 8.5 85 59 06.5 4.5 50. 50 58 8.8 6.8 45 5. 4.0 0 0 9 9 50 50.5.5 98 98 8. 8. 80 80 9.6 9.6 6 6 6.6 6.6 4 4 0 0 85 5 50 585 0. 4. 00 0 48 559 460 58 0 9 5 5 585 4. 0 559 58 0 5 5 585 4. 0 559 58 0 5 84 485 650 60 0 6 00 5 68 9 600 0 48 66 8.5 85 59 06.5 4.5 50. 8.5 95 69 06.5 84.5 60.6 50 0 58 8.8 9 6.8 50 45 5. H.5 98 80 9.6 6 6.6 4 0 85 50 0. 00 48 460 9 5 585 4. 0 559 58 0 5 84 485 650 60 0 6 00 5 68 9 5 80 405 5 809 80 94 600 0 4.0 8. 48 66-09 www.hncelectric.com
Shape DIM Shape Dimension And Installation Dimension(mm) W H D H W D H Assemblyaperture weight (kg) Cabinet installation -G -60G -85G Cabinet installation -00G -0G Cabinet installation -50G -80G -5G -55G -400G -450G -500G -560G -60G -R5G4 -R5G4 -RG4-004G4-5R5G4 -R5G4-0G4-05G4-08G4-0G4-00G4-0G4-045G4-055G4-05G4-09G4-0G4 Wall mounting - G4-60G4-85G4 5 405 5 9 5 50 68 40 4 50 4 5 00 6 460 50 59 4 5 800 460 50 4 00 00 000 568 4 400 8.5 85 59 06.5 4.5 50. 8.5 95 69 06.5 84.5 60.6 50 0 58 8.8 9 6.8 50 45 5..5 98 80 9.6 6 6.6 4 0 85 50 0. 00 48 460 9 5 585 4. 0 559 58 0 5 84 485 650 60 0 6 00 5 68 9 5 80 405 5 809 80 94 600 0 4.0 8. 48 66 www.hncelectric.com -0
Shape DIM Cabinet installation - G4-60G4-85G4 Cabinet installation -00G4-0G4 Cabinet installation -50G4-80G4-5G4-55G4-400G4-450G4-500G4-560G4-60G4 Shape Dimension And Installation Dimension(mm) W H D H W D H Assemblyaperture weight (kg) 5 405 5 9 5 50 68 40 4 50 4 5 00 6 460 50 59 4 5 800 460 50 4 00 00 000 568 4 400 - www.hncelectric.com
Connection Diagram Braking Unit DC reactor optional Circult braker B R hree phase ACS power supply R S U V W Morotr Power grounding Main circult Mortor grounding Multi function input Multi function input Multi function input Multi function input 4 Multi function input 5 Multi function input 6 DI DI DI DI4 DI5/HD DI6 Control circult J -short-circuit(default) AOV 0-0V DC - short-circuit AOC 0-0mA DC J -short-circuit(default) AOV 0-0V DC - short-circuit AOC 0-0mA DC AO AO GND P P Analog output Analog output Drain drive(default) +4V SP CM +4V SP J6 J6 A C B Relay output 50V AC/A 0V DC/A source drive 0kΩ P CM +0V AI GND J -short-circuit(default) AIV 0-0V DC - short-circuit AIC 0-0mA DC A C B +4V Relay output 50V AC/A 0V DC/A 0kΩ P +0V AI GND J4 -short-circuit(default) AIV 0-0V DC - short-circuit AIC 0-0mA DC 485 terminal resistor selecting switch J9 Y CM 485+ 485- GND Relay Modbus communication RS485 Shielding cable P wisted shielding cable www.hncelectric.com -