Hinge identification guide

Hinge identification guide

CLIP hinge 3 main components Arm Link Cup Link Arm Cup NOTE: All hinges shown are straight-arm hinges. The same characteristics apply to cranked hinge arms with the exception of the shape/size of arm and different reference numbers. Subject to technical modifications without notice. 05 Blum Inc.

CLIP 00 CLIP 07 3 CLIP 00 Stepped arm Straight link 3 Large opening in cup 4 Exposed link rivet 4 7M5X0 3 CLIP 07 Straight arm Tapered link 3 Small closed cup 4 Covered link rivet 4 75M5X0 Subject to technical modifications without notice. 05 Blum Inc. 3

CLIP 07 CLIP top 07 CLIP 07 Smooth surface Sliding depth adjustment screw 3 Two rivets 3 75M5X0 CLIP top 07 Ribbed surface "Spiral-tech" cam depth adjustment screw 3 Three rivets 3 75T5X0 Subject to technical modifications without notice. 05 Blum Inc. 4

CLIP top 07 CLIP top 0 CLIP top 07 Standard side adjustment screw Tapered link 3 Small opening in cup 3 75T5X0 CLIP top 0 Cam side adjustment screw Slight rib on link 3 No opening in cup 3 7T55X0 Subject to technical modifications without notice. 05 Blum Inc. 5

CLIP top 07 CLIP top 95 thick door CLIP top 07 Straight arm Tapered link 3 Small opening in cup 75T5X0 3 CLIP top 95 thick door Stepped arm Raised line on arm 3 Exposed link rivet 7T95X0 3 Subject to technical modifications without notice. 05 Blum Inc. 6

CLIP top 0 CLIP top 0 + CLIP top 0 Straight arm logo 7T55X0 CLIP top 0 + Indented arm logo 73T55X0 Subject to technical modifications without t notice. 05 Blum Inc. 7

CLIP top 0 CLIP top 0 + CLIP top 0 Straight arm 7T35X0 CLIP top 0 + Indented arm 73T35X0 Subject to technical modifications without t notice. 05 Blum Inc. 8

CLIP top BLUMOTION 0 CLIP top BLUMOTION 0 + CLIP top BLUMOTION 0 Straight arm 7B35X0 CLIP top BLUMOTION 0 + Indented arm 73B35X0 Subject to technical modifications without notice. 05 Blum Inc. 9

CLIP top 55 CLIP top 5 3 CLIP top 55 T-cutout in arm Indented hinge link 3 BLUMOTION ramp sides are open, larger and raised 7T75X0N 3 CLIP top 5 Y-cutout in arm Flat hinge link 3 BLUMOTION ramp is solid, smaller and lower 7T75X0D Subject to technical modifications without notice. 05 Blum Inc. 0

CLIP top 70 CLIP top 55 3 4 CLIP top 70 T-cutout in arm Adjustment screw recessed 3 Rear link inside 4 Round hole 7T65X0 3 4 CLIP top 55 cutouts in arm Adjustment screw flush on top 3 Rear link outside 4 Oval hole 7T75X0N Subject to technical modifications without notice. 05 Blum Inc.

Attachments Screw-on No screws No dowels 7B3550 Press-in Dowel screws 8 mm dowels 7B3580 Subject to technical modifications without notice. 05 Blum Inc.

Attachments EXPANDO EXPANDO screws EXPANDO dowels 7B358E INSERTA Die cast cover 8 mm INSERTA dowels 7B3590 Subject to technical modifications without notice. 05 Blum Inc. 3

CLIP top BLUMOTION, CLIP top and CLIP SERIES 7 = CLIP top BLUMOTION, CLIP top, CLIP 7 B 3 5 8 0 STYLE B = CLIP top BLUMOTION T = CLIP top M = CLIP Subject to technical modifications without notice. 05 Blum Inc. 4

CLIP top BLUMOTION SERIES 7 = CLIP top BLUMOTION STYLE B = CLIP top BLUMOTION ARM DESIGN 4 = Angled 5 = Straight-arm 6 = Half-crank 7 = Full-crank 9 = Special application ATTACHMENT FEATURES 0 = Standard A = Aluminum E = EXPANDO 7 B 3 5 8 0 CLOSING Odd = All CLIP top BLUMOTION hinges are self close only, no free swing = 0, 95 3 = 0 + 9 = Angled, special application OPENING ANGLE 3 = 0, 0 + 9 = 95, angled and special application ATTACHMENT 0 = Aluminum 5 = Screw-on 8 = Press-in 9 = INSERTA Subject to technical modifications without notice. 05 Blum Inc. 5

CLIP top STYLE T = CLIP top A = Angled CLIP top SERIES 7 = CLIP top ARM DESIGN 4 = Angled 5 = Straight-arm 6 = Half-crank 7 = Full-crank 9 = Special application ATTACHMENT FEATURES 0 = Standard A = Aluminum E = EXPANDO 7 T 3 5 8 0 CLOSING Even = Free swing Odd = Self close 0 or = 0, 0, 70, 95, 55, Mini or 3 = 0 +, 0 +, Aluminum 4 or 5 = 07, Glass 9 = Angled, special application OPENING ANGLE 0 = Mini = 07 3 = 0 4 = Glass 5 = 0 6 = 70 7 = 55 8 = Bi-fold 9 = 95 ATTACHMENT 0 = Screw-on for special application 3 = 55 or Bi-fold, press-in 4 = 70 or 55 INSERTA 5 = Screw-on 8 = Press-in 9 = INSERTA Subject to technical modifications without notice. 05 Blum Inc. 6

CLIP STYLE M = Hole for center adjustment and cover cap ARM DESIGN 5 = Straight-arm 6 = Half-crank 7 = Full-crank SERIES 7 = CLIP 7 M 5 8 0 ATTACHMENT FEATURES 0 = Standard E = EXPANDO CLOSING Even = Free swing Odd = Self close 0 or = 00 5 = 07 OPENING ANGLE = 07 = 00 ATTACHMENT 5 = Screw-on 8 = Press-in 9 = INSERTA Subject to technical modifications without notice. 05 Blum Inc. 7

CLIP mounting plates STYLE E = EXPANDO H = Two-piece L = One-piece ATTACHMENT LOCATION 0 = Frame 9.5 mm setback = Panel 37 mm setback 6 = Frame.5 mm setback SERIES 7 = CLIP ATTACHMENT FEATURES 0 = Standard Z = Twin 7 5 L 6 6 0 0....4 Face frame, special applications MATERIAL 3 or 4 = Steel 5 or 7 = Zinc die-cast ATTACHMENT 3 or 5 = In-line 6 or 7 = Wood screws 8 = Pre-mounted system screws 9 = System screws or #7 wood screws HEIGHT 0 = 0 mm 3 = 3 mm 4 = 4.5 mm 6 = 6 mm 9 = 9 mm SPECIAL FEATURES E = EXPANDO I = INSERTA. = Comment Subject to technical modifications without notice. 05 Blum Inc. 8

COMPACT hinge 3 main components Cup Arm Mounting plate Arm Mounting plate Cup Cup depth NOTE: All COMPACT hinges have the overlay stamped on the mounting plate Subject to technical modifications without notice. 05 Blum Inc. 9

COMPACT BLUMOTION 39C COMPACT BLUMOTION 38C COMPACT BLUMOTION 39C 0 /" cup depth Smooth arm 39C35XB.XX COMPACT BLUMOTION 38C 07 7/6" cup depth Indented arm 38C35XB.XX Subject to technical modifications without notice. 05 Blum Inc. 0

COMPACT BLUMOTION 38N COMPACT BLUMOTION 38B COMPACT BLUMOTION 38N 05 Dimple in arm Partial overlay plate ( screw installation) 38N35XB.XX COMPACT BLUMOTION 38B 07 Indented arm Face mount plate ( screw installation) 38B35XBF Subject to technical modifications without notice. 05 Blum Inc.

COMPACT 39C COMPACT 38C COMPACT 39C 0 /" cup depth 39C stamped on base of cup 39C35XC.XX COMPACT 38C 07 7/6" cup depth 38C stamped on base of cup 38C35XC.XX Subject to technical modifications without notice. 05 Blum Inc.

COMPACT 38N COMPACT 38. COMPACT 38N 05 Side adjustment screw Cam depth adjustment screw 38N35XC.XX COMPACT 38. 05 No side adjustment screw No cam depth adjustment screw 38.3580.08 Subject to technical modifications without notice. 05 Blum Inc. 3

Attachments Screw-on No screws No dowels 38N355B.08 Press-in Dowel screws 8 mm dowels 38N358B.08 Subject to technical modifications without notice. 05 Blum Inc. 4

COMPACT BLUMOTION and COMPACT SERIES 3 = COMPACT BLUMOTION and COMPACT 3 9 C 3 5 8 B. 0 OVERLAY & ADJUSTMENTS. = Partial height only B = Full height & side C = Full height, side & depth N = Partial height, side & depth Subject to technical modifications without notice. 05 Blum Inc. 5

COMPACT BLUMOTION and COMPACT OVERLAY & ADJUSTMENTS. = Partial height only B = Full height & side C = Full height, side & depth N = Partial height, side & depth SERIES 3 = COMPACT BLUMOTION and COMPACT CUP MATERIAL 5 = Steel ATTACHMENT/FEATURES 0 = Standard B = COMPACT BLUMOTION C = COMPACT CUP DEPTH 8 = mm (7/6") 9 = 3 mm (/") 3 9 C 3 5 8 B. 0 ATTACHMENT 5 = Screw-on 8 = Press-in PLATE MOUNT. = Wrap around E = Edge F = Face OVERLAYS 05 = 5/6" 06 = 3/8" 08 = /" 0 = 5/8" = 3/4" 6 = " 0 = -/4" = -5/6" = -3/8" 4 = -/" 5 = -9/6" Subject to technical modifications without notice. 05 Blum Inc. 6

Notes Subject to technical modifications without notice. 05 Blum Inc. 7

Please visit blum.com for information on other Blum products LIT.HNG500.05.5 Ident. 63870 05 Blum, Inc. Blum, Inc. 7733 Old Plank Rd. Stanley, NC 864 800-438-6788 blum.com