A Power Relay for a Variety of Purposes with Various Models Conforms to EN 680, UL8, CSA., SEV, SEMKO. Meets VDE0700 requirements for household products according to VDE00. Clearance and creepage distance: 8 mm/8 m. Models with CTI material available. Highsensitivity (360 mw) and highcapacity (6 A) types available. Doublewinding latching type available. Plugin with test button and quickconnect terminals available. Highly functional socket available. XVDE RC+SE Ordering Information Classification Enclosure Coil Contact Form Ratings Ratings SPSTNO SPDT DPSTNO DPDT PCB terminal Generalpurpose Flux protection AC/DC GRA GR GRA GR Fully sealed GRA GR GRA GR Bifurcated contact Flux protection DC GRAZ GRZ Fully sealed GRAZ GRZ Highcapacity Flux protection AC/DC GRAE GRE Highsensitivity Flux protection DC GRAH GRH GRAH GRH Doublewinding latching Flux protection GRKA GRK GRKA GRK Plugin terminal Generalpurpose Unsealed AC/DC GRS GRS LED indicator GRSN GRSN LED indicator with GRSNI GRSNI test button Diode DC GRSD GRSD LED indicator and diode GRSND GRSND LED indicator and GRSNDI GRSNDI diode with test button Plugin terminal Generalpurpose AC/DC GRA3S GR3S (Bifurcated crossbar contact) LED indicator GRA3SN GR3SN LED indicator and diode DC GRA3SND GR3SND Note:. When ordering, add the rated coil voltage to the model number. Example: GRA VDC Rated coil voltage. OMRON has also prepared the above relays with AgSnIn contacts, which are more tolerant of large inrush currents and physical movement compared with relays with standard contacts. When ordering, add "ASI" to the model number. Example: GRAASI 3. Standard, NO contact type relays are TV3 class products in accordance with the TV standards of the UL/CSA. Models with AgSnIn contacts are TV class products. Example: GRAASI When ordering a TV8 class model, insert "TV8" into the model number as follows: Example: GRATV8ASI. Models with CTI material are also available. Contact your OMRON representative for more details. 09
Model Number Legend GR VDC 3 6 7 8 9 0. Relay Function None: Singleside stable K: Doublewinding latching. Number of Poles : pole : poles 3. Contact Form None: PDT A: PSTNO. Contact Type None: Single Z: Bifurcated 3: Bifurcated crossbar. Enclosure Ratings None: Flux protection : Fully sealed 6. Terminals None: Straight PCB S: Plugin T: Quickconnect (upper bracket mounting) 7. Classification None: Generalpurpose E: Highcapacity H: Highsensitivity N: LED indicator D: Diode ND: LED indicator and diode 8. Test button I: Test button Note: Applied for only SN and SND type 9. Contact Material None: AgCdO (Cd free planned Apr 0) ASI: AgSnIn 0.Rated Coil Voltage Refer to Coil Ratings Accessories (Order Separately) Connecting Sockets Number of Poles Applicable Relay Track/surfacemounting Model Socket pole GR PRF0E S(N)(D)(ND)(NI)(NDI)GR PRF0 3S (GRA3S) Poles GRS(N)(D)(ND)(NI)(NDI) PRF08E PRF08 Backmounting Socket Terminals Model PCB terminals PR0P, PR07P Solder terminals PR0A PCB terminals PR08P, PR087P Solder terminals PR08A Note: See Dimensions for details on socket size. Mounting Track Applicable socket Description Model Track connecting socket Mounting track cm (l) x 7.3 mm (t): PFPN m (l) x 7.3 mm (t): PFPN m (l) x 6 mm (t): PFPN End plate PFPM Spacer PFPS Back connecting socket Mounting plate PRP* *Used to mount several PR0A and PR08A connecting sockets side by side. 0
Specifications Coil Ratings Rated voltage VAC VAC /(0) VAC VAC 0/()VAC VAC 30 VAC VAC Rated Current Hz 60Hz 93 ma 6. ma ma 9.3 ma. (.0) ma. ma.7 (3.7) ma.7 ma 7 ma 37. ma 9/(0.6) ma 7. ma. (.3) ma. ma 3.8 (3.) ma 3.8 ma Coil resistance 6 Ω 60 Ω,600 Ω 6, Ω,0 Ω 6,8 30,000 Ω () Ω (30,000) Ω Coil inductance Armature OFF (H) (ref. value) Armature ON Must operate voltage Must release voltage Max. voltage Power consumption 0.9 0.8 3.3.3 7. 6 6. 0.39. 6.8 0 7 3 80% max. of rated voltage 30% min. of rated voltage 0% of rated voltage (at 3 C) Approx. 0.9 VA at 60 Hz (approx. 0.7 VA at 60 Hz) Note:. Rated voltage of bifurcated crossbar contact type: /(0) VAC, 0/() VAC, 30 VAC (Approx. 0.7 VA at 60 Hz).. Depending on the type of Relay, some Relays do not have coil specifications. Contact your OMRON representative for more details. Rated voltage VDC 6 VDC VDC VDC 8 VDC VDC Rated current (/60Hz) 06 ma 88. ma 3.6 ma.8 ma. ma.3 ma Coil resistance 7 Ω 68 Ω 7 Ω, Ω,70 Ω 8,860 Ω Coil inductance Armature OFF 0. 0.8..7 3.86 67. (H) (ref. value) Armature ON 0.39 0..9 8. 7.7 93. Must operate voltage 70% max. of rated voltage Must release voltage % min. of rated voltage Max. voltage 70% of rated voltage (at 3 C) Power consumption Approx. 0.3 W Note: Rated voltage of bifurcated crossbar contact type: VDC, VDC Highsensitivity Relays Rated voltage VDC 6 VDC VDC VDC 8 VDC Rated current (/60Hz) 7. ma 60 ma 30 ma ma 7. ma (see Note. ) Coil resistance (see Note. ) 70 Ω Ω 00 Ω,600 Ω 6,00 Ω Coil inductance Armature OFF (H) (ref. value) Armature ON Must operate voltage Must release voltage Max. voltage Power consumption 0.37 0.3. 7.80 3. 0.7.07.7.60 6.0 70% max. of rated voltage % min. of rated voltage 70% of rated voltage (at 3 C) Approx. 0.36 W Note:. The rated current and coil resistance are measured at a coil temperature of 3 C with a tolerance of +% / % (AC rated current) or ±0% (DC coil resistance). LEDs are used for the builtin operation indicator. For models equipped with these indications, the VAC rated current must be increased by approximately ma; the VDC rated current, by approximately ma. 3. Operating characteristics are measured at a coil temperature of 3 C.
Doublewinding Latching Relays Rated voltage VDC 6 VDC VDC VDC Set Coil Rated current (see note.) 67 ma 38 ma 70.6 ma 3.6 ma Reset Coil Must set voltage Must reset voltage Max. voltage Power consumption Contact Ratings Coil resistance (see note.) 30 Ω 3. Ω 70 Ω 69 Ω Coil inductance Armature OFF (H) (ref. value) Armature ON PCB/Flux Protection, Plugin, Quickconnect Terminal Relays 0.073 0.0 0..7 0.6 0.8 0.83 3.3 Rated current 9 ma ma ma ma Coil resistance Ω 60 Ω Ω 960 Ω Coil inductance Armature OFF 0.003 0.00 0.08 0.079 (H) (ref. value) Armature ON 0.006 0.009 0.036 0.8 70% max. of rated voltage 70% max. of rated voltage 0% of rated voltage (at 3 C) Set coil: Approx. 8 mw; Reset coil: Approx. 600 mw Note:. The rated current and coil resistance are measured at a coil temperature of 3 C with a tolerance of ±0%.. Operating characteristics are measured at a coil temperature of 3 C. Item Generalpurpose, quickconnect terminal Highcapacity Number of poles pole poles pole Load Resistive load Inductive load Resistive load Inductive load Resistive load Inductive load (cosø = ) (cosø = 0.; (cosø = ) (cosø = 0.; (cosø = ) (cosø = 0.; L/R = 7 ms) L/R = 7 ms) L/R = 7 ms) Rated Load 0 () A at VAC; 7. A at A at VAC; A at VAC; 6 A at VAC; 8 A at VAC; 0 () A at 30 VDC VAC; A at 30 VDC 3 A at 30 VDC 6 A at 30 VDC 8 A at 30 VDC A at 30 VDC Rated carry current 0 () A A 6 A Max. switching voltage 380 VAC, VDC 380 VAC, VDC 380 VAC, VDC Max. switching current 0 () A A 6 A Max. switching power, () VA,,87 VA,, VA, VA,,000 VA,,000 VA, 300 (30) W W W 90 W 80 W W Failure rate ma at VDC ( ma at VDC) 0 ma at VDC ma at VDC (reference value) Note:. P level: λ 60 = 0. x 0 6 /operation.. ( ): Bifurcated crossbar contact type.
PCB/Flux Protection Relays Item Bifurcated contacts Highsensitivity Number of poles pole pole poles Load Resistive load Inductive load Resistive load Inductive load Resistive load Inductive load (cosø = ) (cosø = 0.; (cosø = ) (cosø = 0.; (cosø = ) (cosø = 0.; L/R = 7 ms) L/R = 7 ms) L/R = 7 ms) Rated Load A at VAC; A at VAC; A at VAC; A at VAC; 3 A at VAC; A at VAC; A at 30 VDC 3 A at 30 VDC A at 30 VDC 3 A at 30 VDC 3 A at 30 VDC. A at 30 VDC Rated carry current A A 3 A Max. switching voltage 380 VAC, VDC 380 VAC, VDC 380 VAC, VDC Max. switching current A A 3 A Max. switching power, VA, VA,, VA, VA, 7 VA, VA, W 90 W W 90 W 90 W W Failure rate ma at VDC ma at VDC 0 ma at VDC (reference value) Note: P level: λ 60 = 0. x 0 6 /operation. PCB/Fully Sealed Relays Item Generalpurpose (single contact) Bifurcated contact Number of poles pole poles pole Load Resistive load Inductive load Resistive load Inductive load Resistive load Inductive load (cosø = ) (cosø = 0.; (cosø = ) (cosø = 0.; (cosø = ) (cosø = 0.; L/R = 7 ms) L/R = 7 ms) L/R = 7 ms) Rated Load 8 A at VAC; 6 A at VAC; A at VAC;. A at VAC; A at VAC; A at VAC; 8 A at 30 VDC A at 30 VDC A at 30 VDC. A at 30 VDC A at 30 VDC 3 A at 30 VDC Rated carry current 8 A A A Max. switching voltage 380 VAC, VDC 380 VAC, VDC 380 VAC, VDC Max. switching current 8 A A A Max. switching power,000 VA,, VA, VA, 37 VA,, VA, VA, W W W 7 W W 90 W Failure rate ma at VDC 0 ma at VDC ma at VDC (reference value) Note: P level: λ 60 = 0. x 0 6 /operation. Latching Relays Number of poles pole poles Load Resistive load Inductive load Resistive load Inductive load (cosø = ) (cosø = 0.; (cosø = ) (cosø = 0.;; L/R = 7 ms) L/R = 7 ms) Rated Load A at VAC; 3. A at VAC; 3 A at VAC;. A at VAC; A at 30 VDC. A at 30 VDC 3 A at 30 VDC A at 30 VDC Rated carry current A 3 A Max. switching voltage 380 VAC, VDC Max. switching current A 380 VAC, VDC Max. switching power, VA, W 87 VA, 7 W 7 VA, 90 W 37 VA, 60 W Failure rate ma at VDC 0 ma at VDC (reference value) Note: P level: λ 60 = 0. x 0 6 /operation. 3 A 3
Characteristics Standard Relays Item Pole Poles Contact resistance 30 mω max. (highcapacity type: mω max.) mω max. Operate (set) time Release (reset) time Max. operating frequency Insulation resistance ms max AC: 0 ms max.; DC: ms max. (w/builtin diode: ms max.) Mechanical: 8,000 operations/hr Electrical:,800 operations/hr (under rated load) MΩ min. (at VDC) Dielectric strength VAC, /60 Hz for min VAC, /60 Hz for min between coil and contacts*; between coil and contacts*; VAC, /60 Hz for min 3,000 VAC, /60 Hz for min between contacts of same polarity between contacts of different polarity VAC, /60 Hz for min between contacts of same polarity Vibration resistance Destruction: 0 to to 0 Hz, 0.7mm single amplitude (.mm double amplitude) Malfunction: 0 to to 0 Hz, 0.7mm single amplitude (.mm double amplitude) Shock resistance Destruction: m/s Malfunction: 0 m/s when energized; m/s when not energized Endurance Ambient temperature Mechanical: AC coil: 0,000,000 operations min.; DC coil:,000,000 operations min. (at 8,000 operations/hr) Electrical:,000 operations min. (at,800 operations/hr under rated load) Operating: 0 C to 70 C (with no icing) Ambient humidity Operating: % to 8% Weight Approx. 7 g (plugin terminal: approx. g) Note: Values in the above table are the initial values. *,000 VAC, /60 Hz for minute when the PR0A or PR08A socket is mounted.
Doublewinding Latching Relays Item Pole Poles Contact resistance 30 mω max. mω max. Set time Reset time Min. set/reset signal width Max. operating frequency Insulation resistance ms max ms max. 30 ms max. Mechanical: 8,000 operations/hr Electrical:,800 operations/hr (under rated load) MΩ min. (at VDC) Dielectric strength VAC, /60 Hz for min VAC, /60 Hz for min between coil and contacts*; between coil and contacts*; VAC, /60 Hz for min 3,000 VAC, /60 Hz for min between contacts of same pole; between contacts of different poles VAC, /60 Hz for min VAC, /60 Hz for min between set and reset coil between contacts of same pole VAC, /60 Hz for min between set and reset coil Vibration resistance Destruction: 0 to to 0 Hz, 0.7mm single amplitude (.mm double amplitude) Malfunction: 0 to to 0 Hz, 0.7mm single amplitude (.mm double amplitude) Shock resistance Destruction: m/s (approx. G) Malfunction: Set: m/s (approx. G); 0 m/s (approx. G) Reset: m/s (approx. 0G) Endurance Ambient temperature Mechanical: 0,000,000 operations min (at 8,000 operations/hr) Electrical:,000 operations min. (at,800 operations/hr under rated load) Operating: 0 C to 70 C (with no icing) Ambient humidity Operating: % to 8% Weight Approx. 7 g Note: Values in the above table are the initial values. *,000 VAC, /60 Hz for minute when the PR0A or PR08A socket is mounted.
Approved Standards UL 8 (File No. E63) Model Contact form Coil ratings Contact ratings GR SPDT 3 to 0 VDC 0 A, 30 VDC (resistive) GR 3 to VAC 0 A, VAC (general use) GRH TV3 (NO contact only) GRS GRT GRA SPSTNO GRA GRAH GRAS GRAT GRE SPDT 6 A, 30 VDC (resistive, NO contact only) 6 A, VAC (general use, NO contact only) GRAE SPSTNO TV3 (NO contact only); /3 hp, VAC GR DPDT A, 30 VDC (resistive) GR A, VAC (general use) GRH TV3 (NO contact only) GRS GRA DPSTNO GRA GRAH GRAS GRAASI SPSTNO 0 A, 30 VDC (resistive) 0 A, VAC (general use) TV/TV8 (NO contact only) CSA. No.0, No. (File No. LR398) Model Contact form Coil ratings Contact ratings GR SPDT 3 to 0 VDC 0 A, 30 VDC (resistive) GR 3 to VAC 0 A, VAC (general use) GRH TV3 (NO contact only) GRS GRT GRA SPSTNO GRA GRAH GRAS GRAT GRE SPDT 6 A, 30 VDC (resistive, NO contact only) 6 A, VAC (general use, NO contact only) GRAE SPSTNO TV3 (NO contact only) GR DPDT A, 30 VDC (resistive) GR A, VAC (general use) GRH TV3 (NO contact only) GRS GRA DPSTNO GRA GRAH GRAS GRAASI SPSTNO 0 A, 30 VDC (resistive) 0 A, VAC (general use) TV8 (NO contact only); / hp, VAC 6
SEV Contact form Coil ratings Contact ratings pole 3 to 0 VDC 6 A, VAC (AgSnIn contact) 3 to VAC 6 A, 30 VDC (AgSnIn contact) 0 A, VAC A, VAC3 0 A, 30 VDC poles 3 to 0 VDC A, VAC 3 to VAC A, 380 VAC A, 30 VDC SEMKO Contact form Coil ratings Contact ratings pole 3 to 0 VDC 0/80 A, VAC 3 to VAC 3/ A, VAC 6/8 A, VAC (AgSnIn contact) poles /0 A, VAC TÜV (IEC ) Contact form Coil ratings Contact ratings pole 3 to 0 VDC, 6 VAC to VAC (for Standard coil) 3 to 8 VDC (for K, U coil) 3 to 70 VDC (for H coil) 0 A, VAC (cosø =.0) 0 A, 30 VDC (0 ms) 6 A, VAC (cosø =.0) (AgSnIn contact) poles 8 A, VAC (cosø = 0.) A, VAC (cosø =.0) A, 30 VDC (0 ms). A, VAC (cosø = 0.) EN 680 (VDE IEC, VDE 03 IMQ VDE Reg No. 666) Contact form Coil ratings Contact ratings pole, 6, 9,, 8,, 8, 60,, 0 VDC 0 A, VAC (cosø =.0), 8,, 8,, /(0), 0,, 0 A, 30 VDC (0 ms) 0/(),, 30, VAC 6 A, VAC (cosø =.0) poles, 6, 9,, 8,, 8, 60,, 0 VDC A, VAC (cosø =.0), 8,, 8,, /(0), 0,, A, 30 VDC (0 ms) 0/(),, 30, VAC 7
Engineering Data Maximum Switching Power Flux Protection/Plugin Relays GR, GRA, GRS, GRT, GRAT GRE, GRAE GRZ, GRAZ DC AC DC AC DC AC Switching voltage (V) Switching voltage (V) Switching voltage (V) GRH, GRAH, GR GRA, GRS GRH, GRAH GR3S, GRA3S DC AC DC AC DC AC resistive load Switching voltage (V) Switching voltage (V) Switching voltage (V) GRKA, GRK GRKA, GRK DC AC DC AC Switching voltage (V) Switching voltage (V) 8
Engineering Data (cont.) Fully Sealed Relays GR, GRA DC AC GR, GRA DC AC GRZ, GRAZ DC AC Switching voltage (V) Switching voltage (V) Switching voltage (V) Endurance Flux Protection/Plugin Relays GR, GRA, GRS, GRT, GRAT GRE, GRAE GRZ, GRAZ Endurance (x0 3 operations) VAC/30VDC V 30V (L/R = 7ms) Endurance (x0 3 operations) 0,000 3,000 300 VAC /30VDC inductive load VAC/30VDC Endurance (x0 operations) 3 30V VAC inductive load VAC/30VDC GRH, GRAH, GR GRA, GRS GRH, GRAH GR3S, GRA3S Endurance (x0 operations) 3 VAC inductive load 30V VAC/30VDC Endurance (x0 3 operations) 0,000 3,000 300 30 VAC inductive load VAC/30VDC 30VDC inductive load Endurance (x0 3 operations) 0,000 7,000 3,000 700 300 70 30 VAC/30VDC VAC /30VDC inductive load 9
GRKA, GRK GRKA, GRK Endurance (x0 operations) 3 VAC/30VDC 30VDC inductive load (L/R = 7ms) VAC inductive load Endurance (x0 3 operations) 0,000 VAC/30VDC 30VDC inductive load VAC inductive load Fully sealed Relays GR, GRA GR, GRA GRZ, GRAZ Endurance (x0 3 operations) VAC/30VDC VAC inductive load 30V (L/R = 7ms) 3 Endurance (x0 operations) VAC/30VDC 30V V Endurance (x0 3 operations) VAC inductive load 30VDC inductive load VAC/30VDC Ambient Temperature vs Maximum Coil Voltage Maximum coil voltage (%) AC coil DC coil Note: The maximum coil voltage refers to the maximum value in a varying range of operating power voltage, not a continuous voltage. Ambient temperature ( C)
Dimensions Note:. All units are in millimeters unless otherwise indicated.. Orientation marks are indicated as follows: Relays with PCB Terminals SPDT Relays GR, GRZ, GRH 3 max. (8.8)* * Terminal Arrangement/ Internal Connections Mounting Holes Tolerance: ±0. 3. 3. (.3)* (0.3) 3 7. Five,.3dia. The illustration shows the GR. SPSTNO Relays GRA, GRAZ, GRAH 0. 0.** 0.3 0.6 **0.3 (H Type) (.) (8.8)* 3 max. * 3. (.3)* (0.3) 3 7. Four,.3dia. The illustration shows the GRA. SPDT/Highcapacity Relays GRE 0.3 0.6 0.** **0.3 (H Type) (.) (8.8)* 3 max. * Eight,.3dia. (.3)* (0.3) 8 3 7 6 7. (.) (.) 0. 0.3 0.3 0.6 SPSTNO/Highcapacity Relays GRAE (8.8)* 3 max. * Six,.3dia. (.3)* (0.3) 8 3 6 7. 0.3 0.3 0.6 (.) (.)
Relays with PCB Terminals SPDT Relays GR, GRZ 3. max. (8.6)* (.9)* Terminal Arrangement/ Internal Connections Mounting Holes Tolerance: ±0. 3. 3. (.8)* 3 7. Five,.3dia. SPSTNO Relays GRA, GRAZ 0.3 0. 0. 0.6 3. max. (8.6)* (.9)* (.) 3. (.8)* 3 7. Four,.3dia. 0.3 Relays with Plugin Terminals 0.6 0. SPDT Relays GRS, GRSD, GRSN, GRSND, GRSNI, GRSNDI GR3S, GR3SD, GR3SN, GR3SND *This terminal is SPDT only. (8.)* (8.6)* * 0..7.. 7.. 3 max. * 0 Three 0.9 x 3 elliptic 7. 3 max. (0.)*7.3 max. (0.87)* (.)*. max. (0.6)* + + (.) Terminal Arrangement/Internal Connections GRS, GR3S GRSN, GRSNI, GR3SN (AC) 3 GRSN, GRSNI, GR3SN (DC) 3 GRSND, GRSNDI, GR3SND (DC) 3 GRSD, GR3SD (DC) + 3 3 (After confirming coil polarity, wire correctly.) (Except GRS, GR3S). (.)* 0..7.. 7. 7.
Dimensions DPDT Relays GRS, GRSD, GRSN, GRSNI, GRSNDI GRSND 3 max.. (.)* (8.)* 0 Terminal Arrangement/Internal Connections GRS GRSN GRSNI (AC) 3 3 8 max. (7.0)* 8 7 6 8 7 6 6 7. 0..6 9. 8.9 (.)*. max. (0.6)* 3 max. (0.)* 7.3 max. (0.87)* + + GRSN GRSNI (DC) 3 8 7 6 GRSND GRSNDI (DC) 3 8 7 6 + GRSD (DC) 3 8 7 6 (After confirming coil polarity, wire correctly.) (.)* 6 0..6. 7. 8.9 9. 3
Relays with PCB Terminals DPDT Relays GR, GRH 3 max. (8.8)* * Terminal Arrangement/ Internal Connections Mounting Holes Tolerance: ±0. Eight,.3dia. (.)* (0.3) 8 7 3 6 7. DPSTNO Relays GRA, GRAH 0.3 0. 0. (8.8)* 0. 3 max. * (.) (.) Six,.3dia. (.)* (0.3) 3 7. 8 6 DPDT Relays GR 0.3 0. 0. 3. max. (8.6)* (.8)* (.) (.) Eight,.3dia. * 8 7 3 6 7. DPSTNO Relays GRA 0.3 0. 0. 0. 3. max. (8.6)* (.8)* (.) (.) Six,.3dia. * 8 3 6 7. 0.3 0. (.) (.) 0. Doublewinding Latching Relays with PCB Terminals SPDT Relays GRK 3 max. (8.8)* (.8)* 3. 3. (.)* (0.3) S R + + 7 6 3 7. Seven,.3dia. 0.3 0. (.) (After confirming coil polarity, wire correctly.)
Doublewinding Latching Relays with PCB Terminals 3 max. SPSTNO Relays (8.8)* (.8)* Terminal Arrangement/ Mounting Holes GRKA Internal Connections Tolerance: ±0. DPDT Relays GRK DPSTNO Relays GRKA (.)* (0.3) (.)* (0.3) 0.3 0. 0.6 3 max. (8.8)* (.8)* 0.8 0.3 0.8 0. 3 max. S R + + 7 6 + S + R 0 9 3 8 7 6 7. (.) 7. (.) 3. (After confirming coil polarity, wire correctly.) Six,.3dia. Eight,.3dia. 0 (.) (After confirming coil polarity, wire correctly.) Six,.3dia. Relays with Quickconnect Terminals SPDT Relays GRT 7. (0.3) 30. max. (9.7)* 0.3 0.8 0... 7. Five,.3dia..7 0. 8. + S + R 0 9 7 6 7. (.) Terminal Arrangement/Internal Connections Mounting Holes Tolerance: ±0. 3 (.) (After confirming coil polarity, wire correctly.) 38 Two M3 or two 3. dia. 9. max. SPSTNO Relays GRAT. max. (3.9)* 30. max. (9.7)* 7.. 7. Five,.3dia..7 0. 8. max. (3.)* Terminal Arrangement/Internal Connections Mounting Holes 38 3 Two M3 or two 3. dia. 9. max.. max. (3.9)* max. (3.)* Note: Model number of quickconnect terminal is 87.
Track/Surface Mounting Sockets PRF0E M3. screw 9 max. 8 max. Terminal Arrangement (Top View) Mounting Holes (for Surface Mounting) 8. max. 39. 3. () () 3 () 3.dia. hole 39.+0. 3.dia. hole. (A) (A) M3 or 3.dia. hole 6.0 max. 6 max. Note: Pin numbers in parentheses apply to DIN standard. PRF08E 8. max.. M3 screw 63.0 max. 8.0 max. 3 3. 39. Terminal Arrangement (Top View) () () () 6 3 7 () () () Mounting Holes (for Surface Mounting) 3.dia. hole 39.+0. 6.0 max. 3. dia. hole. 6.0 max. 8 (A) (A) M3 or 3.dia. hole PRF0 7 Five M3. x 8 Terminal Arrangement Mounting Holes (for Surface Mounting) dia.. dia. hole 7. max. 3. 30+0.0 9. max. 9. 30 max. max. M3 or 3. dia. hole PRF08 7 Eight M3. x 8 Terminal Arrangement Mounting Holes (for Surface Mounting) dia.. dia. hole 7. max. 3. 30+0.0 9. max. 9. 30 max. max. M3 or 3. dia. hole 6
Back Connecting Sockets PR0P (pole) 6.. 3. 7 Terminal Arrangement. max. 6 3. max.. Mounting Holes Tolerance: ±0. Five.6 dia.. 7 7 () PR08P (pole) 36 max. Terminal Arrangement Mounting Holes 0.3 7. max. 7. Eight.3 dia. 3. max..8. 7. (.3) Terminal plate thickness: 0.3 36 max. PR0A (pole) 0.3 7.. max. 6.7 3.8 6.7 3. max. Terminal Arrangement Five 3 x.8 dia. 6 Panel Cutout 3.6+0. Terminal plate thickness: 0.3 36 max. PR08A (pole) 0.3 7 7.. max. 30.+0..8.6 3. max. Recommended thickness of the panel is.6 to.0 mm.8 Eight 3 x. dia. 7. Terminal plate thickness: 0.3 36 max. 7
Mounting Height of Relay with Socket GR Relay 36 PR_P Socket 30 GR Relay PR_A Socket Mounting Track PFPN, PFPN PFPN. 7.3+0. 3+0.3 7+0.. 3+0.3 7 6 9. * 0 0 L 0 0 L. It is recommended to use a panel.6 to.0 mm thick. L: Length m PFPN cm PFPN m PFPN End Plates PFPM 0 6..8 Spacers PFPS 6 3. 3.3.8.3 3.8. 0M x 8 pan head screw.3.8 6. Mounting Plates PRP 90 R. 0 elliptic. 3.6 3. 9 +0. 30. Square hole 9+0. 8+0. 8+0. 8+0. 8+0. 9+0. 7+0. t =.6 mm 8
Precautions Mounting When mounting a number of relays on a PCB, be sure to provide a minimum mounting space of mm between the two juxtaposed relays as shown below. mm min. The above minimum mounting space is necessary due to mutual thermal interference generated by the relays. This restriction may be ignored, however, depending on the operating conditions of the relays. Consult OMRON for details. There is no restriction on the mounting direction of each relay on the PCB. When using this circuit, confirm the set and reset states and then take into account the circuit constant. mm min. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.037. 9