79 xxx The Faculty of has a mission to provide high-quality, hands-on technical education, enabling graduates to continually meet the engineering needs and challenges of United Arab Emirates and beyond. The Engineering Technology Programmes at HCT are of high quality and are, or are in the process of being, internationally accredited by the American Engineering Technology Accreditation Commission of ABET. The Aviation Engineering programmes are licensed and accredited by the GCAA. The Faculty aims to produce graduates effective in the design and practical application of engineering technology solutions, with the ability to lead effectively, work and communicate in an engineering team. Graduates are able to follow standard engineering ethical practices and expand their knowledge and competencies through continuing education or other lifelong learning experiences, as well as serving the community, whether locally, nationally or internationally. Employment prospects for HCT Engineering Technology graduates are very strong and cover many local and international industrial sectors including aviation, computing, construction, consulting, defence, energy, governance, healthcare, manufacturing, oil and gas and telecommunications.
80 Diploma in Applied Engineering Technology: Aircraft Maintenance The programme prepares students for positions as aviation category A licence holders who are effective in the practical application of aircraft maintenance and basic repair. Graduates will be competent to effectively work and communicate in a team, utilise standard practices for industrial ethics, health, safety, Aircraft Maintenance Core s Required : 57 ETD 1102 Aviation Physics (Mod 2) 2 ETD 1104 Aviation Mathematics (Mod 1) 4 ETD 1114 Theory of Flight (Mod 8) 4 ETD 1122 Digital Techniques/Electronic Instruments 2 Systems (Mod 5) ETD 1124 Electrical Fundamentals (Mod ) 4 ETD 1125 Materials and Hardware (EASA Mod 6) 5 ETD 2007 Engineering Diploma Work Placement 7 ETD 210 Gas Turbine Engine (Mod 15) ETD 2104 Human Factors (Mod 9) 4 ETD 2106 Maintenance Practices (Mod 7) 6 ETD 2112 Propellers (Mod 17) 2 ETD 2115 Aircraft Legislation (Mod 10) 5 ETD 2119 Turbo Aerodynamics: Structure and Systems (Mod 11) 9 and environment, be successfully employed in the aviation maintenance engineering industry or accepted into a bachelor programme; expand knowledge and capabilities through continuing education or other lifelong learning opportunities; and serve the community, whether locally, nationally or globally. Required : 15 Arabic Communication and Emirati Studies 5-7 English Communication 6-8 Information Technology and Mathematics 0-4 Social and Behavioural Studies 0-4 Total Required 72 Minimum Duration of Study 2 Maximum Duration of Study 4 Programme Code ENTAP Cost Recovery Programme No Major Code ETA 80
81 Diploma in Applied Engineering Technology: Chemical The programme prepares students for positions as technicians in the Oil and Gas industry who are effective in the practical application of engineering technology solutions; effectively work and communicate in a team; utilise standard practices for industrial ethics, health, safety, and environment; are successfully employed Engineering Technology Core s Required : 26 ETD 1022 Technical Mathematics I 2 ETD 102 Technical Mathematics II 2 ETD 1042 Engineering Measurement and Workshop 2 ETD 1051 Introduction to Engineering Technology 1 ETD 1062 Introduction to CAD 2 ETD 1072 Applied Physics I 2 ETD 2007 Engineering Diploma Work Placement 7 ETD 2022 Technical Mathematics III 2 ETD 202 Applied Physics II 2 ETD 2042 Applied Diploma Project 2 ETD 2052 Industrial Health and Safety 2 Chemical Engineering Elective s Required : 9 ETD 22 Chemical Laboratory Equipment ETD 224 Troubleshooting Techniques ETD 225 Corrosion Inspection and Monitoring ETD 226 Corrosion Control in Industry ETD 227 Petroleum and Petrochemical Industries ETD 228 Water Treatment Systems ETD 229 Utilities Systems in an engineering technology industry or accepted into a bachelor programme; expand knowledge and capabilities through continuing education or other lifelong learning opportunities; and serve the community, whether locally, nationally or globally. Chemical Engineering Core s Required : 18 ETD 120 General Chemistry ETD 121 Chemical Engineering Fundamentals ETD 122 Introduction to Corrosion ETD 220 Material and Energy Balance ETD 221 Process Operations ETD 222 Process Instrumentation and Control Required : 15 Arabic Communication and Emirati Studies 5-7 English Communication 6-8 Information Technology and Mathematics 0-4 Social and Behavioural Studies 0-4 Total Required 68 Minimum Duration of Study 2 Maximum Duration of Study 4 Programme Code ENTAP Cost Recovery Programme No Major Code ETC
82 Diploma in Applied Engineering Technology: Electrical The programme prepares students for positions as technicians in the Electrical Engineering industry who are effective in the practical application of engineering technology solutions; effectively work and communicate in a team; utilise standard practices for industrial ethics, health, safety, and environment; are Engineering Technology Core s Required : 26 ETD 1022 Technical Mathematics I 2 ETD 102 Technical Mathematics II 2 ETD 1042 Engineering Measurement and Workshop 2 ETD 1051 Introduction to Engineering Technology 1 ETD 1062 Introduction to CAD 2 ETD 1072 Applied Physics I 2 ETD 2007 Engineering Diploma Work Placement 7 ETD 2022 Technical Mathematics III 2 ETD 202 Applied Physics II 2 ETD 2042 Applied Diploma Project 2 ETD 2052 Industrial Health and Safety 2 Engineering Technology Elective s Required : 9 ETD 141 Pneumatic and Hydraulics ETD 24 Distributed Control Systems ETD 26 Thermodynamics ETD 27 Maintenance of Rotary Equipment ETD 28 Motor Controls and Drives ETD 241 Sensors and Actuators ETD 242 Industrial Automation and Process Control ETD 291 Power Electronics ETD 292 Generation and Transmission ETD 29 Distribution Systems ETD 294 System Protection successfully employed in an engineering technology industry or accepted into a bachelor programme; expand knowledge and capabilities through continuing education or other lifelong learning opportunities; and serve the community, whether locally, nationally or globally. Electrical Engineering Core s Required : 18 ETD 10 Electrical Measurements ETD 11 Circuit Fundamentals ETD 12 Digital Applications ETD 20 Programmable Logic Controllers ETD 21 Power Systems ETD 22 Electrical Machines Required : 15 Arabic Communication and Emirati Studies 5-7 English Communication 6-8 Information Technology and Mathematics 0-4 Social and Behavioural Studies 0-4 Total Required 68 Minimum Duration of Study 2 Maximum Duration of Study 4 Programme Code ENTAP Cost Recovery Programme No Major Code ETE 82
8 Diploma in Applied Engineering Technology: Electronics The programme prepares students for positions as technicians in the Electronics industry who are effective in the practical application of engineering technology solutions; effectively work and communicate in a team; utilise standard practices for industrial ethics, health, safety, and environment; are successfully employed Engineering Technology Core s Required : 26 ETD 1022 Technical Mathematics I 2 ETD 102 Technical Mathematics II 2 ETD 1042 Engineering Measurement and Workshop 2 ETD 1051 Introduction to Engineering Technology 1 ETD 1062 Introduction to CAD 2 ETD 1072 Applied Physics I 2 ETD 2007 Engineering Diploma Work Placement 7 ETD 2022 Technical Mathematics III 2 ETD 202 Applied Physics II 2 ETD 2042 Applied Diploma Project 2 ETD 2052 Industrial Health and Safety 2 Electronics Elective s Required : 9 ETD 21 Power Systems ETD 22 Electrical Machines ETD 24 Distributed Control Systems ETD 27 Maintenance of Rotary Equipment ETD 28 Motor Controls and Drives ETD 241 Sensors and Actuators ETD 242 Industrial Automation and Process Control ETD 291 Power Electronics ETD 292 Generation and Transmission ETD 294 System Protection in an engineering technology industry or accepted into a bachelor programme; expand knowledge and capabilities through continuing education or other lifelong learning opportunities; and serve the community, whether locally, nationally, or globally. Electronics Core s Required : 18 ETD 10 Electrical Measurements ETD 11 Circuit Fundamentals ETD 12 Digital Applications ETD 206 Communication Systems ETD 20 Programmable Logic Controllers ETD 24 Applied Electronics Required : 15 Arabic Communication and Emirati Studies 5-7 English Communication 6-8 Information Technology and Mathematics 0-4 Social and Behavioural Studies 0-4 Total Required 68 Minimum Duration of Study 2 Maximum Duration of Study 4 Programme Code ETNAP Cost Recovery Programme No Major Code ETL
84 Diploma in Applied Engineering Technology: Instrumentation The programme prepares students for positions as technicians in the Manufacturing and Oil industries who are effective in the practical application of engineering technology solutions; effectively work and communicate in a team; utilise standard practices for industrial ethics, health, safety, and environment; are Engineering Technology Core s Required : 26 ETD 1022 Technical Mathematics I 2 ETD 102 Technical Mathematics II 2 ETD 1042 Engineering Measurement and Workshop 2 ETD 1051 Introduction to Engineering Technology 1 ETD 1062 Introduction to CAD 2 ETD 1072 Applied Physics I 2 ETD 2007 Engineering Diploma Work Placement 7 ETD 2022 Technical Mathematics III 2 ETD 202 Applied Physics II 2 ETD 2042 Applied Diploma Project 2 ETD 2052 Industrial Health and Safety 2 Instrumentation and Control Elective s Required : 9 ETD 20 Programmable Logic Controllers ETD 21 Power Systems ETD 22 Electrical Machines ETD 24 Distributed Control Systems ETD 27 Maintenance of Rotary Equipment ETD 28 Motor Controls and Drives ETD 24 Applied Electronics ETD 244 Engineering Laboratory Analysis successfully employed in an engineering technology industry or accepted into a bachelor programme; expand knowledge and capabilities through continuing education or other lifelong learning opportunities; and serve the community, whether locally, nationally or globally. Instrumentation and Control Core s Required : 18 ETD 10 Electrical Measurements ETD 11 Circuit Fundamentals ETD 12 Digital Applications ETD 141 Pneumatic and Hydraulics ETD 241 Sensors and Actuators ETD 242 Industrial Automation and Process Control Required : 15 Arabic Communication and Emirati Studies 5-7 English Communication 6-8 Information Technology and Mathematics 0-4 Social and Behavioural Studies 0-4 Total Required 68 Minimum Duration of Study 2 Maximum Duration of Study 4 Programme Code EMTAP Cost Recovery Programme No Major Code EMI 84
85 Diploma in Applied Engineering Technology: Mechanical The programme prepares students for positions as technicians in the Mechanical Engineering industry who are effective in the practical application of engineering technology solutions; effectively work and communicate in a team; utilise standard practices for industrial ethics, health, safety, and environment; are Engineering Technology Core s Required : 26 ETD 1022 Technical Mathematics I 2 ETD 102 Technical Mathematics II 2 ETD 1042 Engineering Measurement and Workshop 2 ETD 1051 Introduction to Engineering Technology 1 ETD 1062 Introduction to CAD 2 ETD 1072 Applied Physics I 2 ETD 2007 Engineering Diploma Work Placement 7 ETD 2022 Technical Mathematics III 2 ETD 202 Applied Physics II 2 ETD 2042 Applied Diploma Project 2 ETD 2052 Industrial Health and Safety 2 Mechanical Engineering Elective s Required : 9 ETD 141 Pneumatic and Hydraulics ETD 20 Programmable Logic Controllers ETD 24 Distributed Control Systems ETD 26 Thermodynamics ETD 28 Motor Controls and Drives ETD 241 Sensors and Actuators ETD 242 Industrial Automation and Process Control ETD 25 Power Plant Engineering ETD 254 Alternative Energy ETD 255 Refrigeration and Air Conditioning (HVAC) successfully employed in an engineering technology industry or accepted into a bachelor programme; expand knowledge and capabilities through continuing education or other lifelong learning opportunities; and serve the community, whether locally, nationally or globally. Mechanical Engineering Core s Required : 18 ETD 150 CAD Mechanical ETD 151 Mechanical Engineering Fundamentals ETD 152 Welding and Metal Cutting ETD 250 Fabrication and Machining ETD 251 Material Testing and Selection ETD 252 Maintenance of Mechanical Systems Required : 15 Arabic Communication and Emirati Studies 5-7 English Communication 6-8 Information Technology and Mathematics 0-4 Social and Behavioural Studies 0-4 Total Required 68 Minimum Duration of Study 2 Maximum Duration of Study 4 Programme Code ENTAP Cost Recovery Programme No Major Code ETM
86 HD_BAS in Applied Aviation Maintenance Technology: Airframe and Aeroengines This is a 4-year BAS programme with a Higher Diploma (HD) Exit for UAE GCAA licensing requirements. Students have the option to exit at the end of Year or continue towards the BAS degree. The programme prepares students for positions as aviation category B1.1 (Airframe & Aeroengines) licensed maintenance Aviation Maintenance Technology Core s Required : 25 AHM 109 Electrical Fundamentals (Mod B1 and B2) 9 AHM 180 Basic Aerodynamics (Mod 8: B1 and B2) AHM 2005 Aviation Legislation (Mod 10B1 and B2) 5 AHM 004 Work Placement (10 Weeks) 4 EMM 4902 Aviation Safety Management Systems 2 EMM 4912 Maintenance Resource Management 2 Aviation Maintenance Technology Elective s Required : 12 EMM 400 Advanced Human Factors EMM 410 Total Quality Management in Aviation EMM 420 Aviation Operations Management EMM 440 Human Resources and Relations Management engineers who are able to work in a team to practically apply Aviation Maintenance Engineering Technology solutions with consideration of the industry ethics, health, safety and environment. Airframe and Aeroengine Core s Required : 98 AHA 1404 Electronic Fundamentals (Mod 4 B1) 4 AHA 1504 Digital Techniques/ Electronic Instrument 4 Systems (Mod 5 B1) AHA 1615 Materials and Hardware (Mod 6 B1) 15 AHA 2511 Gas Turbine Engine (Mod 15 B1) 11 AHA 2705 Propeller (Mod 17 B1) 5 AHA 2715 Maintenance Practices (Mod 7 B1) 15 AHA 144 Turbine Aeroplane Aerodynamics, Structures and Systems (Mod 11A) (B1.1) *1 yr course 44 Required : 9 AHE 1102 Aviation English Technology I 2 AHE 2202 Aviation English Technology II 2 AHE 202 Aviation English Technology III 2 AHM 1104 Aviation Mathematics (Mod 1 B1 and B2) 4 AHM 1204 Aviation Physics (Mod 2 B1 and B2) 4 AHM 2904 Human Factors (Mod 9 B1 and B2) 4 EGN 1 Engineering Practice and Leadership English Communication 6 Total Required 174 Minimum Duration of Study Maximum Duration of Study 5 Programme Code AHAAB Cost Recovery Programme No Major Code AEA 86
87 HD_BAS in Applied Aviation Maintenance Technology: Avionics This is a 4-year BAS programme with a Higher Diploma (HD) Exit for UAE GCAA licensing requirements. Students have the option to exit at the end of Year or continue towards the BAS degree. The programme prepares students for positions as aviation category B2 (Avionics) licensed maintenance engineers who are able to work in a team to practically apply aviation maintenance engineering technology solutions with consideration of the industry ethics, health, safety, and environment. Aviation Maintenance Technology Core s Required : 25 AHM 109 Electrical Fundamentals (Mod B1 and B2) 9 AHM 180 Basic Aerodynamics (Mod 8: B1 and B2) AHM 2005 Aviation Legislation (Mod 10B1 and B2) 5 AHM 004 Work Placement (10 Weeks) 4 EMM 4902 Aviation Safety Management Systems 2 EMM 4912 Maintenance Resource Management 2 Aviation Maintenance Technology Elective s Required : 12 EMM 400 Advanced Human Factors EMM 410 Total Quality Management in Aviation EMM 420 Aviation Operations Management EMM 440 Human Resources and Relations Management Avionics Core s Required : 98 AHV 1411 Electronic Fundamentals (Mod 4 B2) 11 AHV 1511 Digital Techniques Electronic Instrument 11 Systems (Mod 5 B2) AHV 2406 Propulsion (Mod 14 B2) 6 AHV 2611 Materials and Hardware (Mod 6 B2) 11 AHV 2711 Maintenance Practices (Mod 7 B2) 11 AHV 48 Aircraft Aerodynamics, Structures and Systems (Mod 1) (B2) *1 yr course 48 Required : 9 AHE 1102 Aviation English Technology I 2 AHE 2202 Aviation English Technology II 2 AHE 202 Aviation English Technology III 2 AHM 1104 Aviation Mathematics (Mod 1 B1 and B2) 4 AHM 1204 Aviation Physics (Mod 2 B1 and B2) 4 AHM 2904 Human Factors (Mod 9 B1 and B2) 4 EGN 1 Engineering Practice and Leadership English Communication 6 Total Required 174 Minimum Duration of Study Maximum Duration of Study 5 Programme Code AHAAAB Cost Recovery Programme No Major Code AVI
88 Bachelor of Applied Science in Aeronautical Engineering Technology The programme deals with the design, manfacturing, maintenance, operation, and support of aero-vehicles. This programme productces graduates who have handson technical and engineering skills with air flight-capable machines, the demonstrated ability to think cricically Aeronautical Engineering Core s Required : 48 AET 2111 Fluid Dynamics AET 2112 Electric Fundamentals I DC (MOD, B1) AET 211 Electronic Fundamentals (MOD 4, B1) AET 2114 Aircraft Materials AET 2211 Fundamentals of Flight AET 2212 Electric Fundamentals II AC (MOD, B1) AET 221 Aerodynamics I AET 2214 Engineering Mechanics AET 111 Aero Engineering Thermodynamics AET 112 Applied Engineering Mechanics AET 11 Airframe Structures AET 400 Aeronautical Project I AET 402 Aeronautical Project II AET 4111 Energy and Propulsion AET 4211 Computer-Aided Analysis for Aero- Mechanical Design AET 4212 Aviation Legislation General Engineering Core s Required : 16 EGN 110 Engineering Measurements and CAD Introduction EGN Health Safety and Environment EMC 200 Computer Aided Drafting EMC 01 Fabrication and Welding ERK 004 Work Placement 4 and manage projects, and who have a broad academic education. This broad-based programme would enable graduates to pursue careers in aircraft manufacturing sectors, aviation operations and management. Aeronautical Engineering Elective s Required : 12 AET 411 Aircraft Structures Analysis AET 421 Aircraft Design AET 41 Composite Materials for Aerospace Applications AET 441 Control Systems AET 451 Aircraft Reliability and Maintenance Engineering AET 461 Aviation Management AET 471 Crew Resource Management and Human Factors AET 481 Rocket Science AET 491 Computational Aerodynamics Required : 9 EGN 1 Engineering Practice and Leadership MTH 110 Pre Calculus MTH 111 Statistics for Engineering PHY 110 Physics I PHY 120 Physics II English Communication 9 Social and Behavioural Studies Mathematics and Science Required s Required : 12 MTH 120 Calculus I MTH 210 Calculus II MTH 250 Linear Algebra and Differential Equations MTH 01 Calculus III Total Required 127 Minimum Duration of Study 4 Maximum Duration of Study 6 Programme Code AETAB Cost Recovery Programme No Major Code AET 88
89 Bachelor of Applied Science in Chemical Engineering Technology The programme covers the laws of chemistry, physics, and mathematics which form the basis of many industrial processes in areas such as energy, oil and gas, chemical processing, etc. The programme prepares the students for positions as engineers with the technical and managerial skills necessary to enter Chemical Engineering Core s Required : 64 ECH 110 Chemical Engineering Principles I ECH 201 Chemical Engineering Principles II ECH 20 Fluid Mechanics ECH 204 Analytical Chemistry ECH 205 Organic Chemistry ECH 206 Thermodynamics ECH 208 General Chemistry II ECH 00 Mass Transfer ECH 01 Materials and Corrosion ECH 02 Chemical Heat Transfer ECH 0 Electrical Fundamentals and Instrumentation ECH 04 Process Control: Chemical ECH 05 Unit Operation I ECH 06 Reaction Kinetics ECH 400 Chemical Engineering Design ECH 401 Design Project I ECH 402 Design Project II ECH 405 Chemical Engineering Simulation EGN 110 Engineering Measurements and CAD Introduction EGN Health Safety and Environment ERK 004 Work Placement 4 careers in the design, manufacturing, operation, and maintenance of chemical processes. Students will gain practical knowledge in heat and mass transfer in plants and process control design projects. Graduates typically have strengths in applied design, development and implementation of chemical engineering systems. Chemical Engineering 4000 Elective s See Programme Chair for available courses Required : 12 ECH 407 Optimisation and Application in Refinery ECH 490 Chemical Process HAZOP and Risk Analysis ECH 491 Gas Processing ECH 49 Petroleum and Petrochemical Processing Mathematics and Science Required s Required : 12 MTH 120 Calculus I MTH 210 Calculus II MTH 250 Linear Algebra and Differential Equations MTH 01 Calculus III Required : 9 ECH 100 General Chemistry I EGN 1 Engineering Practice and Leadership MTH 110 Pre Calculus MTH 111 Statistics for Engineering PHY 110 Physics I English Communication 9 Social and Behavioural Studies Total Required 127 Minimum Duration of Study 4 Maximum Duration of Study 6 Programme Code ECHAB Cost Recovery Programme No Major Code ECH
90 Bachelor of Applied Science in Civil Engineering Technology The programme prepares graduates for positions as engineers with the technical and management skills necessary to enter careers in the planning, design, construction, operation and maintenance of building, transportation, utility and development projects. Sustainability, environmental impact on the built environment and nation building are key elements of the programme. Graduates will have the ability to Civil Engineering Core s Required : 64 ECV 100 Applied Drafting and CAD: Civil ECV 110 Construction Materials ECV 200 Soil Mechanics ECV 201 Engineering Mechanics ECV 202 Fluid Mechanics and Hydraulics ECV 20 Strength of Materials ECV 204 Foundation Engineering ECV 205 Site Surveying ECV 00 Highway Engineering ECV 01 Waste Water Engineering ECV 02 Quantity Surveying and Estimating ECV 0 Structural Analysis ECV 05 Water Resources and Supply ECV 06 Concrete Design ECV 07 Civil Engineering Construction ECV 26 Steel Design ECV 400 Civil Project I ECV 402 Civil Project II ECV 405 Environmental Engineering EGN 110 Engineering Measurements and CAD Introduction ERK 004 Work Placement 4 analyse and design systems, specify project methods and materials, perform costing services and manage technical tasks in support of both public and private sector organisations in the civil engineering construction industry. Civil Engineering 4000 Elective s See Programme Chair for available courses Required : 12 ECV 480 Concrete Design II ECV 481 GIS Applications in Civil Engineering ECV 490 Road Design and Construction ECV 492 Construction Contract Management ECV 496 Solid Waste Management ECV 497 Research Methods in Engineering ECV 499 Transportation Planning Mathematics and Science Required s Required : 12 MTH 120 Calculus I MTH 210 Calculus II MTH 250 Linear Algebra and Differential Equations MTH 01 Calculus III Required : 9 ECV 207 Chemistry for Civil Engineering EGN 1 Engineering Practice and Leadership MTH 110 Pre Calculus MTH 111 Statistics for Engineering PHY 110 Physics I English Communication 9 Social and Behavioural Studies Total Required 127 Minimum Duration of Study 4 Maximum Duration of Study 6 Programme Code ECVAB Cost Recovery Programme No Major Code ECV 90
91 Bachelor of Applied Science in Electrical Engineering Technology The programme prepares graduates for positions in the engineering disciplines of power generation, transmission, distribution, and control of electric energy systems and related equipment. This programme prepares the students for positions as engineers with the technical and managerial skills necessary to enter careers in the design, application, installation, Electrical Engineering Core s Required : 64 EEC 100 Electric Circuits I EEC 200 Electric Circuits II EEC 201 Digital Circuits EEC 20 Microcontroller Systems EEC 205 Electronics I EEC 00 Instrumentation and Control EEC 07 Signals and Systems EEC 404 Control Systems EEL 200 Power Electronics EEL 202 Power Generation and Transmission EEL 204 Principles of Machines and Power EEL 00 Electrical Machines EEL 01 Electrical Power Distribution EEL 02 System Protection and Coordination EEL 441 Power Systems Analysis EGN 110 Engineering Measurements and CAD Introduction EGN 200 Computer Programming EGN Health Safety and Environment EGN 400 Design Project I EGN 40 Design Project II ERK 004 Work Placement 4 and maintenance of electrical systems. Students gain experience in circuits, semiconductor devices, digital systems, programming, microcontrollers, power systems, industrial instrumentation, and system control. Graduates are well prepared for analysis, applied design, development and implementation of electrical systems. Electrical Engineering 4000 Elective s See Programme Chair for available courses Required : 12 EEL 480 Electrical Drives EEL 481 Electrical Maintenance Operations EGN 402 Programmable Logic Controllers EGN 482 Industrial Problem Solving EGN 491 Renewable Energy Systems Mathematics and Science Required s Required : 12 MTH 120 Calculus I MTH 210 Calculus II MTH 250 Linear Algebra and Differential Equations MTH 01 Calculus III Required : 9 EGN 1 Engineering Practice and Leadership MTH 110 Pre Calculus MTH 111 Statistics for Engineering PHY 110 Physics I PHY 120 Physics II English Communication 9 Social and Behavioural Studies Total Required 127 Minimum Duration of Study 4 Maximum Duration of Study 6 Programme Code EELAB Cost Recovery Programme No Major Code EEL
92 Bachelor of Applied Science in Electronic Engineering Technology The programme prepares graduates for positions in the engineering disciplines of communications, instrumentation, controls, and related electronic systems. This programme prepares the students for positions as engineers with the technical and managerial skills necessary to enter careers in the design, application, installation, and maintenance of Electronic Engineering Core s Required : 64 EEC 100 Electric Circuits I EEC 200 Electric Circuits II EEC 201 Digital Circuits EEC 20 Microcontroller Systems EEC 205 Electronics I EEC 00 Instrumentation and Control EEC 01 Electronics II EEC 04 Communication Systems EEC 07 Signals and Systems EEC 10 Digital Communications EEC 50 Embedded System Design EEC 401 Data Communications and Networks EEC 404 Control Systems EEL 204 Principles of Machines and Power EGN 110 Engineering Measurements and CAD Introduction EGN 200 Computer Programming EGN Health Safety and Environment EGN 400 Design Project I EGN 402 Programmable Logic Controllers EGN 40 Design Project II ERK 004 Work Placement 4 electronic systems. Students gain experience in circuits, semiconductor devices, digital systems, programming, microcontrollers, embedded systems, industrial instrumentation, communication systems, and system control. Graduates are well prepared for analysis, applied design, development and implementation of electronic systems. Electronic Engineering 4000 Elective s See Programme Chair for available courses Required : 12 EEC 40 Programmable Devices EEC 405 VLSI Design EEC 494 Mobile Communications EEC 496 Digital Signal Processing EEC 499 Intelligent Systems EEL 490 Machine Control and Drives EGN 481 Robotics Technology EGN 482 Industrial Problem Solving EGN 491 Renewable Energy Systems Mathematics and Science Required s Required : 12 MTH 120 Calculus I MTH 210 Calculus II MTH 250 Linear Algebra and Differential Equations MTH 01 Calculus III Required : 9 EGN 1 Engineering Practice and Leadership MTH 110 Pre Calculus MTH 111 Statistics for Engineering PHY 110 Physics I PHY 120 Physics II English Communication 9 Social and Behavioural Studies Total Required 127 Minimum Duration of Study 4 Maximum Duration of Study 6 Programme Code EECAB Cost Recovery Programme No Major Code EEC 92
9 Bachelor of Applied Science in Engineering Logistics Management The programme has been designed to provide a range of core and specialist academic knowledge to cater to the differing demands within the logistics sector. The programme will equip graduates with the required knowledge, skills, and applied science essential for meeting the needs of the local and international industries. Logistics Core s Required : 54 LOG 100 Logistics Principles and Supply Chain Management LOG 110 Enterprise Information Management LOG 200 Transport General Basics and Technologies LOG 201 Strength of Materials LOG 210 Global Energy and Environmental Technology LOG 220 Materials Handling Technologies and Automation LOG 20 Telematics in Logistics LOG 00 Maritime Transport LOG 10 Specification of Technical Systems LOG 20 ERP I Principles LOG 02 Sales and Distribution in Logistics 2 LOG 40 Transport and Economic Geography LOG 50 Planning of Warehouse Systems LOG 602 ERP 2 Applications 2 LOG 702 Logistics Controlling 2 LOG 4912 Capstone Thesis Project 12 Aviation/Maritime and Public Transport Electives See Programme Chair for available courses Required : 16 LOG 4002 Work Experience 4 LOG 400 GIS in Logistics LOG 410 Dangerous Goods LOG 420 Port Management LOG 40 Airport Management LOG 440 Road and Rail Freight LOG 450 Public Transport LOG 460 Airline Management LOG 470 Management of Distribution Networks LOG 480 National Transport and Planning Law LOG 4904 Internship 4 MAR 00 Transport and Maritime Law MAR 470 Shipping Management Business and Engineering Core s Required : 26 BUS 200 Business and Commercial Law BUS 45 International Human Resource Management BUS 45 International Quality Management System ECV 100 Applied Drafting and CAD: Civil EGN 102 Project Management 2 LOG 120 Business Administration I LOG 2402 Business Administration II MTH 120 Calculus I MTH 210 Calculus II Required : 9 LSM 111 Statistical Mathematics MTH 110 Pre Calculus PHY 110 Physics I - 12 Art and Humanities 6 English Communication 9-12 Social and Behavioural Studies 6-9 Total Required 15 Minimum Duration of Study 4 Maximum Duration of Study 6 Programme Code LOGAB Cost Recovery Programme No Major Code LOG
94 Bachelor of Applied Science in Marine Engineering This programme gives students the necessary education and training to become a marine engineering officer at sea. It covers the academic components required by the IMO Standards of Training and Certification of Watchkeepers at chief engineer s level. The programme also includes practical seatime with guided study, and provided sufficient seatime is obtained by the Marine Engineering Core s Required : 70 MAR 140 Fabrication & Repair I MAR 1502 Marine Chemistry 2 MAR 1602 Introduction to Marine Engineering & 2 Maritime Regulations MAR 2004 Fabrication & Repair II 4 MAR 201 Marine Materials MAR 20 Marine Engineering Knowledge I 2 MAR 01 Ship Stability MAR 02 Fabrication & Welding II MAR 0 Engineering Control I MAR 04 Diesel Engine Maintenance MAR 05 Electrical Power Engineering MAR 51 Naval Architecture and Ship Construction MAR 4002 Air Conditioning & Refrigeration 2 MAR 404 Damage Stability & Stress MAR 408 Project I MAR 4102 Engineering Knowledge: Boilers 2 MAR 415 Project II MAR 417 Naval Architecture MAR 418 Engineering Knowledge: Diesel MAR 422 Engineering Control II 2 MAR 42 Electrical Systems MAR 424 Material Technology MAR 426 Advanced Engineering Knowledge MAR 427 Marine Machinery Operations MAR 41 Marine Control Systems end of third year students can apply to the National Transport Authority for the Certificate of Competency at Officer of the Watch level. To obtain higher level Certificates of Competency students will be required to undertake further seatime and then apply to the National Transport Authority. Engineering and Mathematics Core s Required : 15 EMC 200 Computer Aided Drafting EMC 202 Statics and Dynamics EMC 205 Fluid Mechanics EMC 01 Fabrication and Welding EMC 02 Thermodynamics I Sea Time Core s Required : 0 MAR 1010 Marine Engineering Sea Time I 10 MAR 010 Marine Engineering Sea Time II 10 MAR 4010 Marine Engineering Sea Time III 10 Required : 9 MAR 40 Leadership & Management MAR 416 Leadership MTH 121 Mathematics for Marine Engineering I MTH 122 Mathematics for Marine Engineering II MTH 12 Mathematics for Marine Engineering III PHY 110 Physics I - 12 English Communication 9-12 Social and Behavioural Studies "6-9 Total Required 154 Minimum Duration of Study 5 Maximum Duration of Study 7 Programme Code MAREG Cost Recovery Programme Yes Major Code MEG 94
95 Bachelor of Applied Science in Marine Transport This programme gives students the necessary education and training to become a deck officer at sea. It covers the academic components required by the IMO Standards of Training and Certification of Watchkeepers at Masters level. The programme also includes practical seatime with guided study, and provided sufficient seatime is Marine Transport Core s Required : 78 MAR 110 Navigation I MAR 120 Introduction to the Maritime Industry MAR 10 Principles of Seamanship & Watchkeeping MAR 201 Cargo Handling & Stowage I MAR 250 Navigation II MAR 260 Meteorology I MAR 270 Navigation III MAR 280 Nautical Knowledge MAR 01 Ship Stability MAR 51 Naval Architecture and Ship Construction MAR 60 Maritime Law I MAR 70 Meteorology II MAR 80 Navigation IV MAR 401 Shiphandling I MAR 402 Cargo Handling & Stowage II MAR 404 Damage Stability & Stress MAR 405 Navigation V MAR 406 Cargo Handling & Stowage III MAR 407 Shiphandling II MAR 408 Project I MAR 411 Bridge Resource Management MAR 412 Navigation VI MAR 41 Cargo Operations & Transportation MAR 414 Maritime Law II MAR 415 Project II MAR 417 Naval Architecture obtained by the end of third year students can apply to the National Transport Authority for the Certificate of Competency at Officer of the Watch level. To obtain higher level Certificates of Competency students will be required to undertake further seatime and then apply to the National Transport Authority. Engineering and IT Core s Required : 6 EMC 202 Statics and Dynamics MTH 1 Mathematics for Marine Transport III Sea Time Core s Required : 0 MAR 1110 Marine Transport Sea Time I 10 MAR 110 Marine Transport Sea Time II 10 MAR 4110 Marine Transport Sea Time III 10 Required : 9 CIS 10 Data and Information Management MAR 40 Leadership & Management MAR 416 Leadership MTH 11 Mathematics for Marine Transport I MTH 12 Mathematics for Marine Transport II PHY 110 Physics I - 12 English Communication 9-12 Social and Behavioural Studies "6-9 Total Required 15 Minimum Duration of Study 5 Maximum Duration of Study 7 Programme Code MARTS Cost Recovery Programme Yes Major Code MTS
96 Bachelor of Applied Science in Maritime Engineering and Naval Architecture This programme will educate students in the field of Maritime Engineering and Naval Architecture, to prepare them to work in a wide range of maritime related industries in the UAE including: the offshore industry; shipyards; classifications societies; ship design consultancies; ship owners, and ports. Maritime Engineering and Naval Architecture Core s Required : 29 MAR 220 Naval Architecture MAR 10 Marine Machinery Systems MAR 202 Ship Production 2 MAR 0 Resistance and Propulsion MAR 402 Ship Structures I 2 MAR 50 Ship and Machinery Design I MAR 4802 Maritime Design Project I 2 MAR 482 Ship and Machinery Design II MAR 4862 Maritime Design Project II 2 MAR 487 Ship and Machinery Design III MAR 488 Maritime Transportation Maritime Engineering and Naval Architecture Elective s Required : 12 MAR 442 Coastal Engineering and Maritime Structures MAR 44 Offshore Engineering MAR 444 Ship Production II MAR 445 Ship Repair MAR 446 Port Engineering MAR 480 Ship Structures II MAR 48 Seakeeping and Manoeuvring MAR 485 Marine Surveying MAR 490 Marine Safety Mathematics and Science Required s Required : 12 MTH 120 Calculus I MTH 210 Calculus II MTH 250 Linear Algebra and Differential Equations MTH 01 Calculus III General Engineering Core s Required : 4 EEC 207 Electrical Engineering Fundamentals EGN 110 Engineering Measurements and CAD Introduction EMC 200 Computer Aided Drafting EMC 201 Materials Selection and Testing EMC 202 Statics and Dynamics EMC 20 Manufacturing Technology EMC 204 Mechanics of Materials EMC 205 Fluid Mechanics EMC 00 Industrial Plant Maintenance EMC 02 Thermodynamics I ERK 004 Work Placement 4 Required : 9 MTH 110 Pre Calculus MTH 111 Statistics for Engineering PHY 110 Physics I PHY 120 Physics II Art and Humanities English Communication 9 Social and Behavioural Studies - 6 Total Required 126 Minimum Duration of Study 4 Maximum Duration of Study 6 Programme Code MENBP Cost Recovery Programme No Major Code MAR 96
Bachelor of Applied Science in Mechanical Engineering Technology 97 The programme deals with the manipulation of energy through useful mechanical devices and the application of thermodynamics and heat transfer systems. The programme prepares students for positions as engineers with the knowledge, problem solving ability, and managerial skills to enter careers in the design, installation, manufacturing, testing and maintenance of mechanical systems. Students will gain expertise in mechanical design, turbomachinery and process control. Graduates typically have strengths in the analysis, applied design, development and implementation of mechanical systems and processes. Mechanical Engineering Core s Required : 64 EEC 207 Electrical Engineering Fundamentals EGN 110 Engineering Measurements and CAD Introduction EGN 0 Heat Transfer EGN Health Safety and Environment EGN 400 Design Project I EGN 40 Design Project II EMC 200 Computer Aided Drafting EMC 201 Materials Selection and Testing EMC 202 Statics and Dynamics EMC 20 Manufacturing Technology EMC 204 Mechanics of Materials EMC 205 Fluid Mechanics EMC 00 Industrial Plant Maintenance EMC 01 Fabrication and Welding EMC 02 Thermodynamics I EMC 05 Thermodynamics II EMC 06 Mechanical Design I EMC 16 Process Control: Mechanical EMC 400 Turbomachinery EMC 404 Refrigeration and Air Conditioning System ERK 004 Work Placement 4 Mathematics and Science Required s Required : 12 MTH 120 Calculus I MTH 210 Calculus II MTH 250 Linear Algebra and Differential Equations MTH 01 Calculus III Required : 9 EGN 1 Engineering Practice and Leadership MTH 110 Pre Calculus MTH 111 Statistics for Engineering PHY 110 Physics I PHY 120 Physics II English Communication 9 Social and Behavioural Studies Mechanical Engineering 4000 Elective s See Programme Chair for available courses Required : 12 EGN 491 Renewable Energy Systems EGN 492 Engineering Design EMC 412 Gas Turbines EMC 414 Production Planning and Control (PPC) EMC 492 Desalination and Power EMC 496 Power Plant Engineering EMC 497 Computer Integrated Manufacturing EMT 492 Mechanical Vibrations Total Required 127 Minimum Duration of Study 4 Maximum Duration of Study 6 Programme Code EMCAB Cost Recovery Programme No Major Code EMC
98 Bachelor of Applied Science in Mechatronic Engineering Technology The programme combines the fields of mechanical and electronic systems for applications in automation, robotics and manufacturing plants. The programme prepares students for positions as engineers with the technical and managerial skills necessary to enter careers in the design, installation, manufacturing and maintenance of mechatronic systems. Students gain practical knowledge in manufacturing technology, programmable logic controllers and instrumentation and control systems. Graduates have skills in the analysis, applied design, development and implementation of mechatronic systems. Mechatronic Engineering Core s Required : 64 EEC 20 Microcontroller Systems EEC 207 Electrical Engineering Fundamentals EEC 00 Instrumentation and Control EGN 110 Engineering Measurements and CAD Introduction EGN 200 Computer Programming EGN Health Safety and Environment EGN 400 Design Project I EGN 402 Programmable Logic Controllers EGN 40 Design Project II EGN 481 Robotics Technology EMC 200 Computer Aided Drafting EMC 201 Materials Selection and Testing EMC 202 Statics and Dynamics EMC 20 Manufacturing Technology EMC 204 Mechanics of Materials EMC 222 Fluid Power EMT 202 Electromechanical Systems EMT 20 Electronics Systems and Circuits EMT 01 Thermofluid Systems EMT 401 Industrial Control Systems ERK 004 Work Placement 4 Mathematics and Science Required s Required : 12 MTH 120 Calculus I MTH 210 Calculus II MTH 250 Linear Algebra and Differential Equations MTH 01 Calculus III Required : 9 EGN 1 Engineering Practice and Leadership MTH 110 Pre Calculus MTH 111 Statistics for Engineering PHY 110 Physics I PHY 120 Physics II English Communication 9 Social and Behavioural Studies Mechatronic Engineering 4000 Elective s See Programme Chair for available courses Required : 12 EGN 491 Renewable Energy Systems EGN 492 Engineering Design EMC 16 Process Control: Mechanical EMC 404 Refrigeration and Air Conditioning System EMC 412 Gas Turbines EMC 414 Production Planning and Control (PPC) EMC 492 Desalination and Power EMC 496 Power Plant Engineering EMC 497 Computer Integrated Manufacturing EMT 492 Mechanical Vibrations Total Required 127 Minimum Duration of Study 4 Maximum Duration of Study 6 Programme Code EMTAB Cost Recovery Programme No Major Code EMT 98
Bachelor of Applied Science in Petroleum Engineering Technology 99 Petroleum Engineering as a discipline has developed rapidly over the years and finds applications in various industries. This programme will provide UAE Nationals with the necessary skills to take up employment as engineers in the oil and gas industry in the country. Petroleum engineering professionals use their expertise in physics, chemistry, mathematics, geology, engineering applications, and communication to strike a balance between environmental impact and affordable supply. Petroleum engineering overlaps with many of the engineering disciplines, such as: mechanical, chemical, and civil. Petroleum Engineering Core s Required : 9 EPT 1102 Introduction to Petroleum Engineering 2 EPT 2002 Physical Geology 2 EPT 204 Fluid Mechanics and Heat Transfer EPT 205 Reservoir Petrophysics EPT 206 Reservoir Fluids EPT 00 Drilling Engineering EPT 01 Reservoir Engineering I EPT 02 Well Performance EPT 05 Completion and Workover EPT 06 Reservoir Engineering II EPT 07 Reservoir Characterisation EPT 4002 Design Project I 2 EPT 4022 Design Project II 2 EPT 4102 Petroleum Production Systems 2 EPT 4112 Petroleum Economics and Risk Analysis 2 Petroleum Engineering Elective s Required : 12 EPT 420 Reservoir Simulation EPT 421 Well Test Analysis and Design EPT 422 Advanced Drilling Engineering EPT 42 Geostatistics EPT 424 Natural Gas Production EPT 425 Enhanced Oil Recovery EPT 426 Petroleum Engineering Numerical Analysis EPT 427 Separation and Treatment of Petro Fluids EPT 428 Well Completion and Stimulation EPT 429 Production Engineering Engineering Technology Core s Required : 25 ECH 100 General Chemistry I ECH 206 Thermodynamics ECH 208 General Chemistry II EGN 110 Engineering Measurements and CAD Introduction EGN Health Safety and Environment EMC 202 Statics and Dynamics EMC 204 Mechanics of Materials ERK 004 Work Placement 4 Mathematics and Science Required s Required : 12 MTH 120 Calculus I MTH 210 Calculus II MTH 250 Linear Algebra and Differential Equations MTH 01 Calculus III Required : 9 EGN 1 Engineering Practice and Leadership MTH 110 Pre Calculus MTH 111 Statistics for Engineering PHY 110 Physics I PHY 120 Physics II English Communication 9 Social and Behavioural Studies Total Required 127 Minimum Duration of Study 4 Maximum Duration of Study 6 Programme Code EPTAB Cost Recovery Programme Yes Major Code EPT