Surge Withstanding Thick FilmResistors(SWCR Series) Features: Excellent surge and pulse withstanding performance Higher power rating than General Purpose Thick Film Resistors Offered in to sizes RoHS & REACH Compliant Halogen Free Part Number Structure SWCR - U K - 02 D T Series Size Power Rating R = /8W T = /4W U = /3W V = /2W W = 3/4W Z =.5W TCR K = ±00ppm/ C L = ±200ppm/ C Resistance Value 00 = KΩ 2493 = 249KΩ 4R7 = 4.7Ω 02 = KΩ Resistance Tolerance J = ±5% K = ±0% M = ±20% Packaging T = Tape & Reel Example P/N: SWCR-UK-02JT Dimensions Standard temination finish is 00% matte Tin (Sn) over Nickel. Unit: inches (mm) L W Size L W T i i2 0.062 ± 0.004 (.60 ± 0.0) 0.079 ± 0.004 (2.0 ± 0.0) 0.22 ± 0.004 (3.0 ± 0.0) 0.22 ± 0.004 (3.0 ± 0.0) 0.03 ± 0.004 (0.80 ± 0.) 0.049± 0.006 (.25 ± 0.5) 0.06 ± 0.004 (.55 ± 0.0) 0.02 ± 0.006 (2.60 ± 0.5) 0.08 ± 0.004 (0.45 ± 0.0) 0.09 ± 0.004 (0.50 ± 0.0) 0.02 ± 0.008 (0.30 ± 0.20) 0.03 ± 0.008 (0.35 ± 0.20) 0.09 ± 0.009 (0.50 ± 0.25) 0.09 ± 0.009 (0.50 ± 0.25) 0.02 ± 0.008 (0.30 ± 0.20) 0.06 ± 0.008 (0.40 ± 0.20) 0.09 ± 0.008 0.09 ± 0.008 i i T 0.96 ± 0.004 (5.0 ± 0.0) 0.25 ± 0.004 (6.35 ± 0.0) 0.098 ± 0.006 (2.50 ± 0.5) 0.22 ± 0.006 (3.0 ± 0.5) 0.024 ± 0.009 (0.60 ± 0.25) 0.024 ± 0.009 (0.60 ± 0.25) 0.020 ± 0.008 0.020 ± 0.008 i2 i2 Structure 3 5 4 87 6 2 Alumina Substrate 5 Nickel Plating 2 Backside Electrode 6 Tin Plating 3 Top Electrode 7 Resistive layer 4 Edge Electrode 8 Overcoat Email: sales@venkel.com Phone: 52.794.008 Toll Free: 800.950.8365 Web: www.venkel.com
Electrical Specifications and Range Size Power Rating at 70 C (W) 0.25W (/8W) 0.25W (/4W) 0.33W (/3W) 0.50W (/2W) 0.75W (3/4W).5W (.5W) Max. Working Voltage 50V 50V 200V 200V 400V 500V Max. Overload Voltage 00V 300V 400V 400V 800V 000V Tolerance ±5%(J) ±0% (K) ±20% (M) Operating Temp. Range TCR to +55 C Resistance Range to +55 C Resistance Range to +55 C Resistance Range to +55 C to +55 C to +55 C Resistance Range Resistance Range Resistance Range ±00ppm 300Ω - MΩ 300Ω - 20MΩ 22Ω - 20MΩ 22Ω - 20MΩ 22Ω - 20MΩ 22Ω - 20MΩ ±200ppm 0Ω - 270Ω Ω - 270Ω Ω - 20Ω Ω - 20Ω Ω - 20Ω Ω - 20Ω ±00ppm 300Ω - MΩ 300Ω - 20MΩ 22Ω - 20MΩ 22Ω - 20MΩ 22Ω - 20MΩ 22Ω - 20MΩ ±200ppm 0Ω - 270Ω Ω - 270Ω Ω - 20Ω Ω - 20Ω Ω - 20Ω Ω - 20Ω ±00ppm 300Ω - MΩ 300Ω - 20MΩ 22Ω - 20MΩ 22Ω - 20MΩ 22Ω - 20MΩ 22Ω - 20MΩ ±200ppm 0Ω - 270Ω Ω - 270Ω Ω - 20Ω Ω - 20Ω Ω - 20Ω Ω - 20Ω NOTE: Overload Voltage=2.5* (P*R). or Max. overload voltage listed above, whichever is lower. Marking Code E-96 values for size and larger, will be marked with standard 4 digit marking code. E-24 values for size and larger, will be marked with standard 3 digit marking code. - E-96 values will be marked with a standard 3 digit alpha numeric code (Please see alpha numeric codes). Derating Curve Rated power (%) 20 00 80 60 40 20 0-50 -25 0 25 50 75 00 25 50 75-55 70 Ambient temperature ( C) 2 Email: sales@venkel.com Phone: 52.794.008 Toll Free: 800.950.8365 Web: www.venkel.com
Single Pulse Graph 0000 Pulse Power (W) 000 00 0 0.000 0.00 0.0 0. Pulse Duration Time (s) Note: The Single pluse graph is the result of 50 rectangular shape pulses that are applied at one-minute intervals. The limit of acceptance was a shift in resistance of less than % from the initial value. The power applied was subjected to the restrictions of the maximum permissible pulse voltage. Multi Pulse Graph 0000 Pulse Power (W) 000 00 0 0.000 0.00 0.0 0. Pulse Duration Time (s) Note: The continuous load graph was obtained by applying repetitive rectangular pulses where the pulse period was adjusted so that the average power dissipated in the resistor was equal to its rated power at 70 C. Again the limit of acceptance was a shift in resistance of less than % from the initial value. Email: sales@venkel.com Phone: 52.794.008 Toll Free: 800.950.8365 Web: www.venkel.com 3
Pulse Voltage 000 Power Voltage(V) 00 0 0.000 0.00 0.0 0. Pulse Duration Time (s) 0/700mS Lightning Surge Peak Voltage (V) 0000 000 00 Note: Resistors are tested in accordance with IEC 60 5- using 0/700mS pulse shapes. The limit of acceptance is a shift in resistance of less than % from the initial value. 0 0 00 000 0000 00000 000000 Resistance (Ω).2/50mS Lightning Surge Peak Voltage (V) 0000 000 00 Note: Resistors are tested in accordance with IEC 60 5- using.2/50ms pulse shapes. The limit of acceptance is a shift in resistance of less than % from the initial value. 0 0 00 000 0000 00000 000000 Resistance (Ω) 4 Email: sales@venkel.com Phone: 52.794.008 Toll Free: 800.950.8365 Web: www.venkel.com
Reel Specifications F Label H Unit: mm (inch) C E F G H M M C E 3.0 ± 0.2 (0.5 ± 0.008) 60.0 ±.0 (2.36 ± 0.03).4 ±.0 (0.45 ± 0.04) 9.0 ±.3 (0.35 ± 0.02).5 ±.3 (0.06 ± 0.02) 80 ± 2.0 (7.09 ± 0.08) G Minimum of 30 empty pockets at the beginning of reel, 65 minimum empty pockets at the end. Tape Specifications B G T A F W T J Embossed Paper Dø H E All dimensions in mm. Tape Size (inches) A B W E F T G H J Dø.90±0.0.0±0.05 8.0±0.0.75±0.05 3.50±0.05 0.60±0.03 4.00±0.0 4.00±0.0 2.00±0.05.55±0.05 Paper 2.37±0.20.60±0.05 8.0±0.0.75±0.05 3.50±0.05 0.75±0.05 4.00±0.0 4.00±0.0 2.00±0.05.55±0.05 3.55±0.05 2.00±0.05 8.0±0.0.75±0.05 3.50±0.05 0.75±0.05 4.00±0.0 4.00±0.0 2.00±0.05.55±0.05 3.40±0.05 2.75±0.05 8.0±0.0.75±0.05 3.50±0.05 0.75±0.05 4.00±0.0 4.00±0.05 2.00±0.05.60±0.0 Embossed 5.45±0.0 2.85±0.0 2.00±0.0.75±0.0 5.50±0.05 6.65±0.0 3.40±0.0 2.00±0.0.75±0.0 5.50±0.05.00 +.02.0, -0.00 +.02.0, -0 4.00±0.0 4.00±0.05 2.00±0.05 4.00±0.0 4.00±0.05 2.00±0.05.50 +0., -0.50 +0., -0 Peel Back Force and Direction Diagram Direction of pull Direction of unreeling Carrier tape Top cover tape 65 ~ 80 Peel back force and direction of peel back angle should follow EIA48--A. Peel back force should be between 0.N.3N and peel back angle of 65 80. Bottom cover tape Email: sales@venkel.com Phone: 52.794.008 Toll Free: 800.950.8365 Web: www.venkel.com 5
Environmental Characteristics Type of Test Requirement Test Method Temperature Coefficient of Resistance (T.C.R) As per Spec. JIS-C-520-4.8 IEC-605-4.8 to +25 C, 25 C is the reference temperature Short Time Overload ±(.0%+0.05Ω) Insulation Resistance 0G Endurance ±(3.0%+0.05Ω) Damp Heat with Load ±(3.0%+0.05Ω) Dry Heat ±(3.0%+0.05Ω) Bending Strength ±(.0%+0.05Ω) Solderability 95% min coverage Resisatance to Soldering Heat ±(.0%+0.05Ω) JIS-C-520-4.3 IEC-605-4.3 RCWV*2.5 or Max. Overload voltage whichever is lower for 5 seconds JIS-C-520-4.6 IEC-605-4.6 Max. Overload voltage for minute JIS-C-520-4.25 IEC-605-4.25. 70±2 C, RCWV for 000 hrs with with.5 hrs ON and 0.5 hrs OFF JIS-C-520-4.24 IEC-605-4.24 40±2 C, 90~95% R.H., RCWV for 000 hrs with with.5 hrs ON and 0.5 hrs OFF JIS-C-520-4.23 IEC-605-4.23.2 at +55 C for 00 hrs JIS-C-520-4.33 IEC-605-4.33,255 sizes: 2mm Other sizes: 3mm JIS-C-520-4.7 IEC-605-4.7 245±5 C for 3 seconds JIS-C-520-4.8 IEC-605-4.8 260±5 C for 0 seconds Voltage Proof No breakdown or flashover JIS-C-520-4.7 IEC-605-4.7.42 times Max. Operating voltage for minute Leaching Individual leaching area 5% Total leaching area 0% Rapid Change of Temperature ±(.0%+0.05Ω) JIS-C-520-4.8 IEC-600068-2- 8.2. 260±5 C for 30 seconds JIS-C-520-4.9 IEC-605-4.9 to +55 C, 5 cycles 6 Email: sales@venkel.com Phone: 52.794.008 Toll Free: 800.950.8365 Web: www.venkel.com