Indian Institute of Engineering Science and Technology, Shibpur Howrah-711 103 Project Code: DRC/GRSE-OTH/SOCSAT/SKM/002/14-15 Notice Inviting Quotations Sealed quotations are invited for the supply of Various Furniture as per the following technical specification. The relevant bidding document can be downloaded from the website www.iiests.ac.in. Last date of submission of sealed quotation is 23 rd May, 2016 by 3.00 p.m. Dean (R &D) (A. Code DRC-T011/16-17 ) 1
INDIAN INSTITUTE OF ENGINEERING SCIENCE AND TECHNOLOGY, SHIBPUR BIDDING DOCUMENT (Project Code: DRC/GRSE-OTH/SOCSAT/SKM/002/14-15) Ref.: Advt. No. SCT 1196, published in Ei-Samay, dated 09.05.2016 For Supply of Furniture Under GRSE sponsored project entitled as Skill Development Training Programme for the Unemployed Youth of the locality in Metiabruz 2
NOTICE INVITING QUOTATION FOR SUPPLY OF FURNITURE Sealed Quotations are invited from bonafide Supplier, Original Manufacturer or their authorised Dealers / Distributors for supply of following furniture items as per details given below for GRSE sponsored CSR project under, Indian Institute of Engineering Science and Technology, Shibpur, Howrah-711 103 (Project Code: DRC/GRSE-OTH/SOCSAT/SKM/002/14-15). The quotations should be submitted to the letter box of PROF. SUDIPTA MUKHOPADHYAY, PROFESSOR IN CHARGE OF FURNITURE SECTION, 1 ST floor of Department of Mining Engineering, Indian Institute of Engineering Science and Technology, Shibpur, Howrah-711 103 within 23 rd, May, 2016. Rate quoted should be inclusive of all charges, taxes, charges for delivery and other payables, if any. Items for which quotations are invited: Sl. No. 1 2. 3. Items Class Chairs / Study Chairs with Desk-let Secretariat Table with Computer attachment Revolving Chair with arm-rest & Medium back 4. Steel Almirah Technical Specifications Stated Below 5. Desktop table 6. File Cabinet Professor In-Charge-Furniture IIEST-SHIBPUR Head of Department IIEST - SHIBPUR 3
DETAILED OF THE ITEMS TO BE PROCURED UNDER ITEM NO. 01 Class Chairs / Study Chairs with Desk-let Size: 54cm W x 77cm D x 81cm H The under structure assembly is a wooden frame made of dia 1.9cm x 18. Desklet is made of 1.5cm thick plywood / wooden with melamine finish all around. or near equivalent Sal Wood Structure ESTIMATED QUANTITY 20 ITEM NO. 02 Secretariat Table with Computer attachment Width 1600 mm, Depth 600 mm, Height 750 mm Table with key board & mouse tray, drawers and printer rack of approved design. Table top and sides are 25mm thick pre-laminated particle MDF board. Edges sealed with thick edge band all around. The side panels should have glide screws each for levelling of the desk. The drawers and shelves to be made from 18 mm pre laminated particle board with PVC edge band on the entire exposed surface. The drawers and key board tray are provided with suitable slides for smooth operation. Locking arrangement for at least one drawer. ESTIMATED QUANTITY 04 ITEM NO. 03 Revolving Chair with arm-rest & Medium back Seat size : 450 mm x 400 mm, Back size : 400 mm x 450 mm (+ 10% variation allowed) Seat & Back made up of not less than 1.2cm thick hot pressed plywood & upholstered with fabric & moulded polyurethane foam with PVC lapping of approved colour and design. Loop type Armrest made up of integral polyurethane with 50-70 shore A hardness with MS insert. Should have features like 360 deg. revolving, Upright position locking, tilt tension adjustment with 3 piece telescopic type and injection moulded vertical stand. The pedestal should be powder coated and fitted with at least 5 nos. twin wheel castors. 4
ESTIMATED QUANTITY 05 STANDARDIZATION ISO 9001, ISO 14000, ISO 18001 ITEM NO. 04 DESCRIPTION& Steel Almirah 4 Shelves (78 x36 x20 ) Model Store well Plain, Powder coated paint finish PRIME QUALITY Steel CRCA SHEET OF 1mm TO 0.9mm FOR ALL THE SIDES LIKE TOP, BOTTOM, DOOR, LEFT AND RIGHT HAND SIDES. FOUR SHELVES ARE ONLY OF 0.8 mm CRCA SHEET ESTIMATED QUANTITY 07 ITEM NO. 05 Desktop Table 410 mm x 840 mm x 700 mm Wooden Table with key board & mouse tray, drawers and printer rack of approved design Pre laminated wooden ESTIMATED QUANTITY 8 ITEM NO. 06 File Cabinet (4 drawer) Height not more than 1325 mm, Width not more than 475 mm, Depth not more than 620 mm with or without Leveller DESCRIPTION& Rigid Knock down construction, made of thick gauge (not less than 0.7mm with minor variations) high yielding steel (CRCA grade D as per IS-513) Sliding drawers with metal telescopic channel with steel ball for free movement of drawers fitted with cam lock. Finish: Epoxy Polyester Powder coated to the thickness of 50 microns(+\- 10%.) to approved colour ESTIMATED QUANTITY 01 STANDARDIZATION ISO 9001, ISO 14000, ISO 18001 Terms &Conditions: a) Rate to be quoted per unit basis for each of the items and should be inclusive of all charges, taxes and other payables, if any. 5
b) Bidders are required to submit, along with the quotations, coloured version of Original Manufacturer s catalogue mentioning Brand and Model No. with dimensions and available colour combinations of each item (including For item no 03 and 06), without which quotation will not be considered. Colour combinations of each of the items however, would be finally approved by the purchaser without any alternation of the quoted price. d) Bidders are required to submit at least one credential of successfully carrying out a similar type of job of worth not less than half of the total quoted price awarded by any similar national level institution of higher education or government agency. e) Bidders are required to submit self-attested photocopies of valid Trade-License, Professional tax, VAT-Registration, PAN Card and latest IT-Return Certificates, Relevant ISO certificates ( as applicable) along with relevant certificate of being bonafide supplier for Furniture items, original Manufacturer and / or Authorised Dealer / Distributor. f) The authority reserves the right to accept or reject any or all quotations in part or in whole, without assigning any reason. g) The evaluation of quotations would be made on the basis of individual items or unit rates quoted thereof and NOT based on the total cost for the estimated minimum quantities of all the items as mentioned above Professor In-Charge-Furniture IIEST-SHIBPUR Head of Department IIEST - SHIBPUR 6