Models Single output Model Input FEATURES: RoHS Compliant Operating Temperature - C to + 85 C High Efficiency up to 84% Continuous Short Circuit Protection Remote On / Off Control Wide 2:1 Input Range 8 Pin SIP Package Input / Isolation 1 & 3 VDC Current Max (ma) Isolation (VDC) Input Current Full Load No Load (ma) Max. Capacitive Load (μf) Efficiency (%) AM3G-3SZ 4.5-9 3.3 7 1 6 65 2 74 AM3G-5SZ 4.5-9 5 1 7 2 76 AM3G-512SZ 4.5-9 12 2 1 7 75 47 82 AM3G-515SZ 4.5-9 15 1 7 75 47 82 AM3G-13SZ 9-18 3.3 7 1 2 25 2 76 AM3G-15SZ 9-18 5 1 3 15 2 81 AM3G-1212SZ 9-18 12 2 1 35 35 47 84 AM3G-1215SZ 9-18 15 1 35 35 47 84 AM3G-23SZ 18-36 3.3 7 1 133 15 2 74 AM3G-25SZ 18-36 5 1 1 15 2 79 AM3G-2412SZ 18-36 12 2 1 156 47 82 AM3G-2415SZ 18-36 15 1 152 47 84 AM3G-43SZ 36-72 3.3 7 1 66 1 2 75 AM3G-45SZ 36-72 5 1 82 1 2 78 AM3G-4812SZ 36-72 12 2 1 78 15 47 81 AM3G-4815SZ 36-72 15 1 78 15 47 81 AM3G-3SH3Z 4.5-9 3.3 7 3 6 65 2 74 AM3G-5SH3Z 4.5-9 5 3 7 2 76 AM3G-512SH3Z 4.5-9 12 2 3 7 75 47 82 AM3G-515SH3Z 4.5-9 15 3 7 75 47 82 AM3G-13SH3Z 9-18 3.3 7 3 2 25 2 76 AM3G-15SH3Z 9-18 5 3 3 15 2 81 AM3G-1212SH3Z 9-18 12 2 3 35 35 47 84 AM3G-1215SH3Z 9-18 15 3 35 35 47 84 AM3G-23SH3Z 18-36 3.3 7 3 133 15 2 74 AM3G-25SH3Z 18-36 5 3 1 15 2 79 AM3G-2412SH3Z 18-36 12 2 3 156 47 82 AM3G-2415SH3Z 18-36 15 3 152 47 84 AM3G-43SH3Z 36-72 3.3 7 3 66 1 2 75 AM3G-45SH3Z 36-72 5 3 82 1 2 78 AM3G-4812SH3Z 36-72 12 2 3 78 15 47 81 AM3G-4815SH3Z 36-72 15 3 78 15 47 81 Models Dual output Model Input Current Max (ma) Isolation (VDC) Click on Series name for product info on aimtec.com Input Current Full Load No Load (ma) Max. Capacitive Load (μf) Efficiency (%) AM3G-5DZ 4.5-9 ±5 ±3 1 9 ±47 77 AM3G-512DZ 4.5-9 ±12 ±125 1 7 9 ±2 81 AM3G-515DZ 4.5-9 ±15 ± 1 7 9 ± 82 AM3G-15DZ 9-18 ±5 ±3 1 3 45 ±47 AM3G-1212DZ 9-18 ±12 ±125 1 38 45 ±2 83 AM3G-1215DZ 9-18 ±15 ± 1 312 45 ± 82 AM3G-25DZ 18-36 ±5 ±3 1 1 ±47 AM3G-2412DZ 18-36 ±12 ±125 1 154 ±2 83 AM3G-2415DZ 18-36 ±15 ± 1 154 ± 83 F 51e R11.J 1 of 6 North America only
Models Dual output (continued) Model Input Current Max (ma) Isolation (VDC) Input Current Full Load No Load (ma) Max. Capacitive Load (μf) Efficiency (%) AM3G-45DZ 36-72 ±5 ±3 1 82 15 ±47 78 AM3G-4812DZ 36-72 ±12 ±125 1 ±2 AM3G-4815DZ 36-72 ±15 ± 1 78 15 ± 81 AM3G-5DH3Z 4.5-9 ±5 ±3 3 9 ±47 77 AM3G-512DH3Z 4.5-9 ±12 ±125 3 7 9 ±2 81 AM3G-515DH3Z 4.5-9 ±15 ± 3 7 9 ± 82 AM3G-15DH3Z 9-18 ±5 ±3 3 3 45 ±47 AM3G-1212DH3Z 9-18 ±12 ±125 3 38 45 ±2 83 AM3G-1215DH3Z 9-18 ±15 ± 3 312 45 ± 82 AM3G-25DH3Z 18-36 ±5 ±3 3 1 ±47 AM3G-2412DH3Z 18-36 ±12 ±125 3 154 ±2 83 AM3G-2415DH3Z 18-36 ±15 ± 3 154 ± 83 AM3G-45DH3Z 36-72 ±5 ±3 3 82 15 ±47 78 AM3G-4812DH3Z 36-72 ±12 ±125 3 ±2 AM3G-4815DH3Z 36-72 ±15 ± 3 78 15 ± 81 NOTE: All specifications in this datasheet are measured at an ambient temperature of 25 C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified Input Specifications Parameters Nominal Typical Maximum Units 5 4.5-9 Range 12 9-18 24 18-36 VDC 48 36-72 Filter Capacitor Turn On Transient Process Time 3 µs Transient Response Deviation ±3 % Start-Up Time ms 5 Vin -.7-15 Absolute Maximum Rating 12 Vin -.7-36 24 Vin -.7- VDC 48 Vin -.7- Peak Input Time ms On/Off Control ON to 1.3VDC Max.(Short circuit Pin 1 and Pin 3) or open circuit OFF 3 to 6VDC Max.(or 3mA to 6mA Max. via 1KΩ Resistor) Input Reflected Ripple Current* 35 ma p-p * The input reflected ripple current should be measured with connected 12μH inductor and 47μF input capacitor (ESR<1Ω at KHz) Isolation Specifications Parameters Conditions Typical Rated Units Tested I/O sec 1 & 3 VDC Resistance > MOhm Capacitance 6 pf Specifications Parameters Conditions Typical Maximum Units accuracy ±1 % Cross Regulation (Dual) 25% load on one output and % load on second output ±5 % Short Circuit Protection Continuous F 51e R11.J 2 of 6 North America only
Short Circuit Restart Auto recovery Line Regulation LL~HL ±.5 % Load Regulation Load 25~% ±1 % Temperature Coefficient ±.2 %/ o C Ripple & Noise At MHz Bandwidth 75 mv p-p General Specifications Parameters Conditions Typical Maximum Units Switching Frequency % load to 6 KHz Operating Temperature Full Load without Derating - to +71 o C Storage Temperature - to +125 o C Max Case Temperature + o C Cooling Free air convection Humidity 95 % Case Material Non-conductive black plastic Potting Material Epoxy (UL94V- rated) Pin Material C5191R-H Solder coated Weight 4.8 g Dimensions (L X W X H).86 x.36 x.44 inches 21.85 x 9. x 11.18 mm MTBF >1 3 hrs (MIL-HDBK -217F, Ground Benign, t=+25 o C) Safety Specifications Parameters Agency Approval Standards CE, UL EN532 Class A, EN524 IEC-4-2, Perf. Criteria A IEC-4-3, Perf. Criteria A IEC-4-4, Perf. Criteria A (external 2uF/V cap required) IEC-4-5, Perf. Criteria A (external 2uF/V cap required) IEC-4-6, Perf. Criteria A IEC-4-8, Perf. Criteria A IEC/EN/UL 9-1:1 & IEC/EN/UL 62368-1 Pin Out Specifications Pin 1 & 3VDC Single Dual 1 - V Input - V Input 2 + V Input + V Input 3 On/Off Control On/Off Control 5 N.C. N.C. 6 + V + V 7 - V Common 8 N.C. - V 1.67 (.42) Dimensions 21.85 (.85) PRINTED FACE 9. (.36) 11.1 (.44). (.2) 2.54 (.1) 17.78 (.7) 3.5 (.12). (.2) 9. (.38) 3. (.14). (.2).25 (.1) F 51e R11.J 3 of 6 North America only
Conducted Emissions Input C1 L1 5V 2uF/25V 5.6uH 12V Single µf/v 18 µh 12V Dual 2.2uF/V 18uH 24V 1uF/35V 18uH 48V uf/v 56uH Vin+ C1 L1 + - Vo+ Aimtec DC-DC Converter Vin- Vo- Load Vin+ Surge C1 2 µf / V + - Vo+ Aimtec DC-DC Converter Vin- Vo- Load Input Reflected Ripple Vin+ Lin 12µH Test Point Cin 47µF + - Vo+ Aimtec DC-DC Converter Vin- Vo- RL (Full Load) Derating * Tested at full load, and nominal input Free Air Convection 71 ºC Power % Safe Operating Area - -25 Ambient Temperature º C 71 85 F 51e R11.J 4 of 6 North America only
Typical Efficiency Example Charts AM3G-512SZ Efficiency vs. Loading 9 7 3 1 % % % % % AM3G-1215SZ Efficiency vs. Loading 9 7 3 1 % % % % % F 51e R11.J 5 of 6 North America only
AM3G-2412SZ Efficiency vs. Loading 9 7 3 1 % % % % % AM3G-4812SZ Efficiency vs. Loading 9 7 3 1 % % % % % NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25 C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec s standard Terms of Sale available at www.aimtec.com. F 51e R11.J 6 of 6 North America only