GSM DCS WCDMA Triple Band Repeater

CRF-GDW27-F GSM DCS WCDMA Triple Band Repeater Gain 80dB, Output 27dBm Overview: CRF-GDW27-F wireless Pico Repeater is a fast and cost effective solution widely deployed to provide coverage improvement for in-building solution, especially for areas without optical access and emergency coverage, eg. house, apartment or office area 1000-2500sq.m. CRF-GDW27-F wireless Pico Repeater receives and amplifies signal from donor BTS. It is a bi-directional amplifier transmitting signal to coverage area, bringing coverage to the shadow or blind area in rural and urban buildings where the BTS footprints can't reach. Features: 1. Elegant and Compact design. 2. Built-in AGC and ALC circuits, which can automatically control the gain of the repeater depending upon the strength of input signals. 3. 31dB MGC(Manual gain control) 5dB one step available for both uplink and downlink to adjust the gain value for proper coverage during installation or maintenance. 4. Auto shut off function available for both uplink and downlink to avoid deep self-oscillations from jamming the towers, saving your trouble from operators. 5. Low power consumption less than 20W only. Product Photos: Applications:

CRF-GDW27-F Specification: Electrical specification Uplink Downlink GSM 890-915MHz 935-960 MHz Frequency Range DCS 1710-1785MHz 1805-1880 MHz WCDMA 1920-1980MHz 2110-2170 MHz Max.Gain 75dB 80dB ±400KHz 50dB 50dB Out of Band Gain ±600KHz 40dB 40dB (GSM,DCS) ±1MHz 35dB 35dB ±5KHz 25dB 25dB 2.7 f_offset<3.5mhz 60dB 60dB Out of Band Gain 3.5 f_offset<7.5mhz 45dB 45dB (WCDMA) 7.5 f_offset<12.5mhz 45dB 45dB 12.5 f_offset 35dB 35dB MGC(Step Attenuation) 31dB / 1dB step Automatic Level Control 20dB Max.Output Power 20dBm 27dBm -30dBm(Max) : Input Power Operating -30dBm(Max) : Operating 0dBm(Max) : Absolute 0dBm(Max) : Absolute Noise Figure GSM 7dB, DCS 8dB, WCDMA 8dB Intermodulation 9KHz~1GHz -36dBm -20dBm (GSM,DCS) 1GHz~12.75GHz -30dBm -20dBm Spurious 9KHz~1GHz -36dBm -36dBm Emission 1GHz~12.75GHz -30dBm -30dBm Spurious Emission Mask Meet 3GPP TS 25.143 ( V 6.2.0 ) WCDMA System Modulation Accuracy 12.5% (DL power Peak Code Domain Error -35dB@Spreading Factor 256 17dBm) 20dBc/30KHz @ ±5MHz ACRR 30dBc/30KHz @ ±10MHz V.S.W.R 2.0 Group Delay 5μs Frequency stability 0.01ppm Power Consumption 20WATT Cooling Heatsink Convection cooling MTBF 100,000 Hrs RF Character Comply with ETSI EN 300 609-4 EMC Comply with ETS 301 489-1 Saftey Comply with EN 60 950 LED Alarm Standard Power LED Green @ Normal work

CRF-GDW27-F ALC LED Orange @ ALC 1~5dB, Red @ ALC 20dB~25dB Mechanical Specifications Standard I /O Port N--Female Impedance 50 ohm Operating Temperature -10 ~+40 Environment Conditions IP40 Dimensions 250*330*104mm Weight 8KG Power Supply Input AC90~264V,output DC9V / 5A

LTE1800 WCDMA Dual Band Selective Repeater CRF-LW20-F Gain 70dB, Output 20dBm Overview: CRF-LW20-F wireless Pico Repeater is a fast and cost effective solution widely deployed to provide coverage improvement for in-building solution, especially for areas without optical access and emergency coverage, eg. house, apartment or office area 500-1800sq.m. CRF-LW20-F wireless Pico Repeater receives and amplifies signal from donor BTS. It is a bi-directional amplifier transmitting signal to coverage area, bringing coverage to the shadow or blind area in rural and urban buildings where the BTS footprints can't reach. Features: 1. Elegant and Compact design. 2. Built-in AGC and ALC circuits, which can automatically control the gain of the repeater depending upon the strength of input signals. 3. 31dB MGC(Manual gain control) 5dB one step available for both uplink and downlink to adjust the gain value for proper coverage during installation or maintenance. 4. Auto shut off function available for both uplink and downlink to avoid deep self-oscillations from jamming the towers, saving your trouble from operators. 5. Low power consumption less than 20W only. Product Photos: Applications:

CRF-LW20-F Specification: Electrical specification Uplink Downlink Frequency Range LTE1800 1710-1785 MHz 1805-1880 MHz WCDMA 1920-1980 MHz 2110-2170 MHz Max.Gain 70dB 70dB Max.Output Power 15dBm 20dBm Bandwidth MGC(Step Attenuation) 31dB / 1dB step Automatic Level Control 20dB Gain Flatness 2dB/3.84MHz Noise Figure 6dB 2.7 f_offset<3.5mhz 60dB Out of Band Gain 3.5 f_offset<7.5mhz 45dB 7.5 f_offset<12.5mhz 45dB 12.5 f_offset 35dB Spurious 9KHz~1GHz -36dBm -36dBm Emission 1GHz~12.75GHz -30dBm -30dBm Spurious Emission Mask Comply with 3GPP TS 25.106 Modulation Accuracy 12.5% Peak Code Domain Error -35dB@Spreading Factor 256 ACRR 20dBc@±5MHz & 30dBc@±10MHz V.S.W.R 2.5 Group Delay 5μs Frequency stability 0.01ppm LED Alarm Standard Power LED Power Indicator ALC LED Orange @ ALC 1~5dB, Red @ ALC 20dB~25dB Mechanical Specifications Standard I /O Port N-Female Impedance 50 ohm Operating Temperature -10 to +40 Environment Conditions IP40 Dimensions 250*220*52mm Weight 3.5KG Power Supply Adapter Input AC90~264V, Output DC9V/3A

CRF-GW20-F GSM WCDMA Dual Band Repeater Gain 70dB, Output 20dBm Overview: CRF-GW20-F wireless Pico Repeater is a fast and cost effective solution widely deployed to provide coverage improvement for in-building solution, especially for areas without optical access and emergency coverage, eg. house, apartment or office area 500-1800sq.m. CRF-GW20-F wireless Pico Repeater receives and amplifies signal from donor BTS. It is a bi-directional amplifier transmitting signal to coverage area, bringing coverage to the shadow or blind area in rural and urban buildings where the BTS footprints can't reach. Features: 1. Elegant and Compact design. 2. Built-in AGC and ALC circuits, which can automatically control the gain of the repeater depending upon the strength of input signals. 3. 31dB MGC(Manual gain control) 5dB one step available for both uplink and downlink to adjust the gain value for proper coverage during installation or maintenance. 4. Auto shut off function available for both uplink and downlink to avoid deep self-oscillations from jamming the towers, saving your trouble from operators. 5. Low power consumption less than 20W only. Product Photos: Applications:

CRF-GW20-F Specification: Electrical specification Uplink Downlink Frequency Range GSM 890-915MHz 935-960MHz WCDMA 1920-1980MHz 2110-2170MHz Max.Gain 65dB 70dB Max.Output Power 15dBm 20dBm Bandwidth GSM 25MHz WCDMA 60MHz MGC(Step Attenuation) 31dB / 1dB step Automatic Level Control 20dB Gain Flatness 2dB/3.84MHz Noise Figure 6dB 2.7 f_offset<3.5mhz 60dB Out of Band Gain 3.5 f_offset<7.5mhz 45dB 7.5 f_offset<12.5mhz 45dB 12.5 f_offset 35dB Spurious 9KHz-1GHz -36dBm -36dBm Emission 1GHz-12.75GHz -30dBm -30dBm Spurious Emission Mask Comply with 3GPP TS 25.106 Modulation Accuracy 12.5% Peak Code Domain Error -35dB@Spreading Factor 256 ACRR 20dBc@±5MHz & 30dBc@±10MHz V.S.W.R 2.5 Group Delay 5μs Frequency stability 0.01ppm LED Alarm Standard Power LED Power Indicator ALC LED Orange @ ALC 1~5dB, Red @ ALC 20dB~25dB Mechanical Specifications Standard I /O Port N-Female Impedance 50 ohm Operating Temperature -10 to +40 Environment Conditions IP40 Dimensions 250*220*52mm Weight 3.5KG Power Supply Adapter Input AC90~264V, Output DC9V/3A

HC22-0827-N300 Hybrid Coupler 2in 2out 800-2700MHz Features: Wide Frequency Range Excellent Coupling Flatness High Directivity / Isolation Cavity structure, High power handing Low Insertion Loss, Low VSWR, Low PIM(IM3) Specifications: Frequency Range 800-2700MHz Insertion Loss 3.4dB Isolation 25dB Return Loss 20dB, (VSWR<1.25) Impedance 50Ω PIM (IMD3) -150dBc @+43dBm*2 Connectors N-Female Power Handling 150W / Input port, (Total power 300W) Temperature -25 to +70 Environmental Humidity 0 to 95% Environmental rating Indoor / IP65 Material Cavity aluminum silver-plated; Connector: Copper Size 190 48 25mm Weight 0.6Kg Outline Drawing & Product Image: Tel: +86 571 86631886, +8618058168088, Fax: +86 571 89930536, Website: www.cenrf.com

SPx-0827-N300 Power Splitter 800-2700MHz N-Female Features: Multiple-Band Frequency Ranges High Power Rating 300 Watt Low PIM, Low VSWR High quality cavity type, High reliability Specification: Product Type 2-way Splitter 3-way Splitter 4-way Splitter Model Number SP2-0827-N300 SP3-0827-N300 SP4-0827-N300 Frequency Range 800 2700MHz Insertion Loss 0.3dB 0.3dB 0.3dB Divider Loss 3.0dB 4.8dB 6.0dB VSWR 1.25 PIM (IM3) -150dBc @+43dBm*2 Power Handling 300W Impedance 50Ω Connector Type N-Female Applied Environment Indoor / Outdoor Relative Humidity 5 to 95% Operating Temperature -25 to +70 Protection class IP65 Material Cavity: Aluminum; Connector: Copper Processing Silver plated inner conductor Dimension 201.1x60.6x25mm 218.9x60.6x25mm 247.6x60.6x42.8mm Dimension & Product Image: 2 way Splitter: 3 way Splitter: 4 way Splitter: Tel: +86 571 86631886, +8618058168088, Fax: +86 571 89930536, Website: www.cenrf.com

CPxx-0827-N300 Directional Coupler 800-2700MHz N-Female Features: Low Insertion Loss Low PIM(IM3), Low VSWR High power handing N-Female connecters Specification: Frequency Range 800 2700MHz Coupling 5dB 6dB 7dB 10dB 15dB 20dB 30dB Insertion Loss 1.8dB 1.4dB 1.0dB 0.8dB 0.4dB 0.3dB 0.2dB In-band Ripple ±0.8dB ±0.8dB ±0.8dB ±1.0dB ±1.0dB ±1.0dB ±1.2dB VSWR <1.25 Directivity PIM (IM3) Power Rating Impedance Connector Type Applied Environment 20@5/6/7/10/15/20dB; 18@30dB -150dBc @+43dBm*2 300W 50Ω N-Female Indoor Relative Humidity 5 to 95% Operating Temperature Material Processing Dimension Net Weight -25 to +70 Cavity: Aluminum; Connector: Copper Silver plated cavity and inner conductor 112.5*34*23.6mm 0.20Kg Dimension & Product Image: Tel: +86 571 86631886, +8618058168088, Fax: +86 571 89930536, Website: www.cenrf.com

TDJ-SA0727-8-90 Wide band Panel Antenna 700-2700MHz 8dBi Specifications: Model Number TDJ-SA0727-8-90 Frequency Range 700-960 MHz 1710-2700MHz Gain 7dBi±1dB 8dBi±1dB Horizontal Beamwidth 90±15 deg 75±12 deg Vertical Beamwidth 65 deg 60 deg Front to Back Ratio 6 db 8 db VSWR 1.4 Input Impedance 50 Ω Polarization Vertical Maximum Power 50 W PIM (IM3) -107dBm @33dBm*2 Connector Type N-Female Operating Temperature -40 to +70 C deg Relative humidity 5 to 95 % Dimensions 210x180x44 mm Net weight 430 g Cable Length 260 mm Radome Material ABS Radome Colour White Operating Temperature -40 to +70 C deg Relative humidity 5 to 95 % Rated Wind Velocity 210 km/h Horizontal Pattern Vertical Pattern Tel: +86 571 86631886, +8618058168088, Fax: +86 571 89930536, Website: www.cenrf.com

Omni Ceiling Antenna 800-2700MHz Polarization Vertical Half-power beam width 360 Omni Ceiling Antenna 800-2700MHz 360 3/5dBi Model TXD-360V02H05U-IN1 Frequency range 800~960 / 1710~2700 MHz VSWR <1.4 Input impendence 50Ω Gain 3dBi±1 @800~960MHz 5dBi±1 @1710~2700 MHz Polarization type Vertical polarization Horizontal Beam width 360 PIM(IM3) -140dBc @ 20W*2 Max power 50W Lightning protection DC ground Connector type N-Female Weight 200 g Dimension Φ180 85 mm Radome material Uv-Protected ABS Antenna s color White Mounting Type Ceiling Installation Environment Temperature WorkingTemperature: -40 to +60 Limit Temperature: -55 to +70 1. Installation instruction: In accordance with the installation sketch, drill a hole of Φ35mm in the ceiling. Screw the fixing nut to fasten the antenna on the ceiling. The ceiling s thickness is at most 20mm. 2. Storage and transportation: A. The antenna must be stored in room temperature and dry environment; B. Handle the antenna with care. 3. Attention: The antenna mustn t be near to fire. Tel: +86 571 86631886, +8618058168088, Fax: +86 571 89930536, Website: www.cenrf.com