SUBMITTAL REVIEW Food Service Equipment Data Sheets GCAN. Notes: 1. See D-C Design comments. Submittal: No. 035.

Similar documents
Spec Section: Concrete Mix Design psi - Review Form Concrete Mix Design psi Data Sheets GCAN

SUBMITTAL REVIEW Steel Reinforcement - Slab and Masonry Shop Drawings GCAN. Notes: 1. See comments on submittal.

SUBMITTAL REVIEW B Passenger Elevators Shop Drawings GCAN

Spec Section: , Complete Elec, Comm, and Fire Alarm , Complete Elec, Comm, and Fire Alarm Data Sheets RAN/GCAN

SUBMITTAL REVIEW Underground Natural Gas Piping Data Sheets GCAN. Notes: 1. See engineer s comments. Submittal: No. 016.

City Plaza Energy Upgrades Timeline of Events Pella Window Cancellation

SECTION SUBMITTAL PROCEDURES

MISSISSIPPI STATE UNIVERSITY Office of Planning Design and Construction Administration

SUBMITTAL REVIEW COVERSHEET

TCC/SHORE TRANSIT BUS MAINTENANCE FACILITY - PHASE II

JEFFERSON LAB TECHNICAL ENGINEERING & DEVELOPMENT FACILITY (TEDF ONE) Newport News, Virginia

Submittal Review SW Macadam Ave Suite 200 ATTENTION: Riley Tobin. Portland, OR RE: BSD Sunset High School

Section Meetings Section Material and Equipment. None Required

Submittal Packages Detailed with Items and Reviewers

LETTER OF TRANSMITTAL

State of New Jersey BOARD OF PUBLIC UTILITIES 44 SO. CLINTON STREET 7 TH FLOOR P.O. BOX 350 TRENTON, NEW JERSEY

SECTION SUBMITTALS PART 1 - GENERAL 1.01 RELATED DOCUMENTS

UCCS University Hall Fire Sprinkler System Upgrade March 1, 2011 RTA SECTION SUBMITTAL PROCEDURES PART 1 - GENERAL

NORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017

East Central College

UNION COUNTY VOCATIONAL-TECHNICAL SCHOOLS West Hall Addition Project Raritan Road, Scotch Plains, NJ

LETTER OF TRANSMITTAL

SECTION SHOP DRAWINGS, PRODUCT DATA, AND SAMPLES

DIVISION 1 GENERAL REQUIREMENTS SECTION SUBMITTAL PROCEDURES

DIVISION 11 EQUIPMENT SECTION PHOTO DARKROOM FUME EXHAUST VENT-HOODS

SECTION SUBMITTAL PROCEDURES PART 1 - GENERAL 1.1 RELATED DOCUMENTS

Promontory Architectural Review Committee

A. Action Submittals: Written and graphic information that requires Engineer's responsive action.

submittals 1s e c t i o n

SECTION SUBMITTAL PROCEDURES

SECTION SHOP DRAWINGS, PRODUCT DATA, AND SAMPLES

Taylor County July 2011 SECTION SHOP DRAWINGS, WORKING DRAWINGS AND SAMPLES

SECTION SUBMITTAL PROCEDURES

UNIFIED FACILITIES GUIDE SPECIFICATIONS

.2 Accompany all submissions with a transmittal letter, in duplicate, containing:.4 Specification Section number for each submittal

SECTION SUBMITTALS. A. PART A and DIVISION 1 of PART B are hereby made a part of this SECTION.

A. Action Submittals: Written and graphic information that requires Architect's responsive action.

MTJ Outdoor Baggage Claim

UNIFIED FACILITIES GUIDE SPECIFICATIONS

What Are Submittals?

LETTER OF TRANSMITTAL

REMARKS: The A.F.F. dimension noted on the drawings to the bottom of the grid is 15 0, this dimension should be 16 0.

CHAPTER 10 MICHIGAN DESIGN MANUAL BRIDGE DESIGN (SI) SHOP DRAWING REVIEW TYPES OF SHOP DRAWINGS Structural Steel

SUBMITTAL TRANSMITTAL OCPS CLAY SPRINGS ES REVIEWED RESUBMITTED 2 TIME(S) SUBMITTAL NUMBER: SUBMITTAL DETAILS: CONTRACTOR/CM:

REVISION #1. Section. fire alarm B. C. the hot. intent of. required. manufacturer. materials. C. Warranty

FLUOROPOLYMER COATED DUCT FOR CAUSTIC ENVIRONMENTS

Working Drawing Manual

SUBMITTAL LETTER Capital Renewal Scoates Hall, Texas A &M University, College Station, TX TAMUS Project

A. This section specifies procedural requirements for Shop Drawings, product data, samples, and other miscellaneous Work-related submittals.

UNIFIED FACILITIES GUIDE SPECIFICATIONS

Working Drawing Procedure

White Lake Township Building Dept Highland Rd. (248) White Lake, MI Fax (248)

SECTION CONTRACTOR SUBMITTALS. A. All submittals by the CONTRACTOR shall be submitted to the ENGINEER.

PROJECT LOCATION BOZEMAN HIGH SCHOOL. ELECTRICAL ENGINEER: Van Dykken Engineering 37 Spanish Peak Drive Bozeman, MT Phone:

SECTION ADMINISTRATIVE REQUIREMENTS SECTION ADMINISTRATIVE REQUIREMENTS

DESIGN REVIEW PROCESS AND APPLICATION

SECTION III SUBMITTALS AND APPROVALS

Submittal Packages Detailed with Items and Reviewers

SECTION 10520: FIRE EXTINGUISHERS AND CABINETS

DWG, Inc. Coastal Carolina University State Project No. Consulting Engineers HTC Arena Lighting H17-N112-JM

Letter of Transmittal

SHOP DRAWINGS, PRODUCT DATA, AND SAMPLES

PLAN SUBMITTAL REQUIREMENTS

CITY OF NAPERVILLE DEVELOPMENT SERVICES TEAM ELEVATOR INSTALLATION/MODERNIZATION/REPAIR

Chapter 1 General Design Information

NORTH HARRIS COUNTY REGIONAL WATER AUTHORITY PRESSURE GAUGES, Section 15130

EMMEGI ARCHITECTURAL FENCING MASTER SPECIFICATION SECTION METAL FENCING, GATES & RAILING SYSTEM PART 1 GENERAL

City of Lompoc Building & Safety Services Section 100 Civic Center Plaza Lompoc, CA Phone: Fax:

Windmill Village Homeowners Association

Answer: Qualification statement should be provided with the bid.

SECTION PROJECT COORDINATION VIA BIM

UNIFIED FACILITIES GUIDE SPECIFICATIONS

SPECIAL PROVISION Description of Project, Scope of Contract and Sequence of Work

SECTION ADMINISTRATIVE REQUIREMENTS

January, 2014 Page 1 of 5

SECTION SHOP DRAWINGS, PRODUCT DATA, AND SAMPLES

SECTION A. RFI: Request from Contractor seeking interpretation, information, or clarification of the Contract Documents.

835 Gil Harbin Industrial Blvd Valdosta, GA 31601

A. Deviation from this standard must be approved by the Project Architect.

May 15, 2012 Hugh Anderson Legal Counsel to the Engineers Joint Contract Documents Committee

Construction Phase Project Management and Documentation

A. Section includes administrative provisions for coordinating construction operations on Project including, but not limited to, the following:

Mailing Address: Fax number: City: State: Zip: Property Owner: City: State: Zip: City: State: Zip:

Submittal Transmittal

September 6, 2018 CITY OF BERKELEY SHATTUCK RECONFIGURATION AND PEDESTRIAN SAFETY PROJECT SPECIFICATION NO C ADDENDUM NO.

FIRE STATION NO TH STREET NORTH ST. PETERSBURG, FL M-1 SCOPE OF WORK SYMBOL DESCRIPTION SYMBOL DESCRIPTION HVAC SYMBOL LEGEND

00-General Drawings. Doc. no.: NA-00-STS002

SECTION CLOSEOUT SUBMITTALS SECTION CLOSEOUT SUBMITTALS

SECTION PROJECT MANAGEMENT AND COORDINATION

Submittal Transmittal

DIVISION 1 - GENERAL REQUIREMENTS SECTION SUBMITTALS

Museum of the Bible Submittal Pkg. No.: Submittal Review Form Submittal Items 1 thru 1

DOCUMENT ADDENDUM NO. 4. Issued to all Bidders: Date: October 14, Contract Name: Electrical Installation. Contract Number: C8410

SECTION STRUCTURAL STEEL. A. PART A and DIVISION 1 of PART B are hereby made a part of this SECTION.

Commercial Infill Project Guide

CITY OF BEVERLY HILLS Department of Public Works and Transportation Civil Engineering Division SANITARY SEWER IMPROVEMENT PLAN REVIEW CHECKLIST

Submittal Transmittal

INDEX OF SPECIFICATIONS SECTION F SPECIAL CONDITIONS DIVISION 1 - GENERAL REQUIREMENTS:

APPLICATION FOR COMMERCIAL CONSTRUCTION FIRE AND LIFE SAFETY PLAN REVIEW PROJECT INFORMATION: Project phone: Project Address: City: State: Zip:

February 18, Re: Zephyr Lakes Amenity Center Zephyrhills, Florida

Transcription:

SUBMITTAL REVIEW Submittal: No. 035.00 Spec Section: 11 4000 Food Service Equipment Reviewed By: Laura Landon, Comma-Q Architecture Date: July 23, 2012 Project: BPS Belgrade Elementary School Location: Belgrade, MT Job Number: 11-03 Copy to: File, Owner This review is only for general conformance with the design concept of the project and general compliance with the information given in the Contract Documents. Corrections or comments made on the submittals during this review do not relieve the CONTRACTOR from compliance with the requirements of the plans and specifications. An opinion of equivalence of a specific item shall not be interpreted as an opinion of equivalence of an assembly of which the item is a component. Submittal review comments have been made within this format and not on the submittal sheets according to the following: NEN No Exceptions Noted GCAN Generally Conforms as Noted RAN Rejected for Reason as Noted IAS Incomplete as Submitted 1. 35.00 11 4000 Food Service Equipment Data Sheets GCAN Notes: 1. See D-C Design comments. END OF REVIEW

SUBMITTAL REVIEW CONTACT: DATE: Laura Landon 7/22/2012 COMPANY: Comma Q Architecture 11 03 ADDRESS: 109 North Rouse Avenue, Ste #1 Bozeman, Montana 59715 PHONE: JOB NUMBER: PROJECT: Belgrade Elementary School Belgrade, Montana FROM: 406 585 1112 Michael Miles, FCSI REVIEWED SEE REMARKS REVISE AND RESUBMIT SEE COMMENTS DOCUMENT: PRODUCT DATA PRODUCT SCHEDULE OTHER: SHOP DRAWINGS SLAB MAINTENANCE DATA WALL BACKING SCHEDULE COORDINATION DRAWINGS Checking is for general conformance with the design concept of the project and general compliance with the information given in the contract documents. The contractor is responsible for dimensions and quantities to be confirmed and correlated at the job site; for information that pertains solely to the fabrication processes or to techniques of construction; and for coordination of the work of all trades. Acceptance does not authorize changes to the contract requirements unless stated in a separate letter. Failure to provide a complete submittal package will result in the return of submittal, without review. It is the sole responsibility of the Kitchen Equipment Contractor to coordinate with General Contractor, verify and adjust equipment gas type and elevation requirements (regulator and orifices) for optimal performance to site specifications regardless of original gas type/elevation provision. Extra charges resulting from KEC not confirming gas type and elevation prior to foodservice equipment ordering will be paid by the Kitchen Equipment Contractor. COMMENTS: KEC to verify and coordinate flooring conditions (Walk in pit required) and surfaces prior to ordering walk in, this box is designed to have 4 modular flooring panels. Shop Drawings: Item 14 Trench Drain ok Item 32 Floor Trough ok H C DESIGN & COUNSULTING P.O. BOX 10545, BOZEMAN MONTANA 59719 406.522. 7700 WWW.H CDESIGN.COM

TRANSMITTAL July 22, 2012 To: H-C Design Attention: Michael Miles From: Laura Landon Project: BPS Belgrade Elementary School Location: Bozeman, MT Job Number: 11-03 Copy to: File we are sending you : Attached Under separate cover the following: Shop drawings: Copy of letter: Specification: Prints: Samples: Drawings: Other: these are transmitted as checked below: Approved: Approved as corrected: Revise and resubmit: Rejected: For your signature: For return : For review & comment: date qty description 7/20/2012 1 (elec) Submittal 35.00 11 4000 Food Service Equipment Remarks: Michael, please review the attached submittal, please return an electronic version to our office with your comments. Thanks

MARTEL CONSTRUCTION, INC. 1203 South Church Avenue Bozeman, MT 59715-5801 LETTER OF TRANSMITTAL Telephone: (406) 586-8585 Facsimile: (406) 586-8646 DATE 07/20/12 JOB NO. 12-001 TRANSMITTAL/SUBMITTAL NO. 35.00 TO: Comma Q Architects RE: Food Service Equipment 109 North Rouse Ave #1 Bozeman, MT 59715 ATTENTION: Laura Landon BELGRADE ELEMENTARY SCHOOL We are hand delivering We are sending via Email X ATTACHED UNDER SEPARATE COVER TheThe following items: Shop drawings Prints Plans Samples Specifications Copy of letter Change order X Product Data COPIES DATE DWG NO. DESCRIPTION 1 7/15/12 11 4000 Food Service Equipment - Item #14- Trench Drain 1 7/15/12 11 4000 Food Service Equipment - Item #32- Floor Trough Drain THESE ARE TRANSMITTED as checked below: X For approval Approved as Submitted Resubmit Copies for Approval For your use Approved as Noted Submit Copies for Distribution As requested Returned for Corrections Return Corrected Prints For review and comment REMARKS: FOR BIDS DUE PRINTS RETURNED AFTER LOAN TO US COPY TO File Michael - HC Design SIGNED: Mike Wilkinson - Project Engineer If enclosures are not as noted, kindly notify us at once.

35.00 11 4000 Food Service Equipment

Eagle Group ASFT-2430-SG Item#:32 Specification Sheet Short Form Specifications Eagle Anti-Splash Floor Trough with stainless steel grating, model. Unit constructed of 14/304 stainless steel all-welded construction. Patented anti-splash design (patent #D519,618 S) assures complete drainage while preventing splash back onto the floor. Drain accommodates up to a 4 -diameter pipe and comes standard with a stainless steel removable perforated basket. Type 304 stainless steel subway style grating shall be 3 16 x 1 vertically positioned bars spaced 1 apart for ease of drainage. Two 5 8 stainless steel rods, set 2 1 4 in from each edge, are welded to the bars to eliminate swaying. Eagle Anti-Splash Floor Trough with fiberglass grating, model. Unit constructed of 14/304 stainless steel all-welded construction. Patented anti-splash design (patent #D519,618 S) assures complete drainage while preventing splash back onto the floor. Drain accommodates up to a 4 -diameter pipe and comes standard with a stainless steel removable perforated basket. Fiberglass grating to be 1 high yellow polyester material with a non-slip grit surface. Tapered I beam construction for ease of cleaning and drainage. Gray color grating available. anti-splash floor trough Options / Accessories Gray color fiberglass grating ADA-approved wide T Bar fiberglass grating, gray color Item No.: Project No.: S.I.S. No.: Anti-splash Floor Troughs MODELS: ASFT-1218-* ASFT-1224-* ASFT-1230-* ASFT-1236-* ASFT-1248-* ASFT-1260-* ASFT-1272-* ASFT-1284-* ASFT-1296-* ASFT-12120-* ASFT-1524-* ASFT-1530-* ASFT-1536-* ASFT-1548-* ASFT-1560-* ASFT-1572-* ASFT-1584-* ASFT-1596-* ASFT-15120-* ASFT-1824-* ASFT-1830-* ASFT-1836-* ASFT-1848-* ASFT-1860-* ASFT-1872-* * See chart on back for complete model numbers. ASFT-1884-* ASFT-1896-* ASFT-18120-* ASFT-2424-* ASFT-2430-* ASFT-2436-* ASFT-2448-* ASFT-2460-* ASFT-2472-* ASFT-2484-* ASFT-2496-* ASFT-24120-* Design and Construction Features Patented anti-splash design (patent #D519,618 S) assures complete drainage, while preventing splash back onto floor. 14 gauge type 304 stainless steel all-welded construction. Built-in pitch towards drain insures complete drainage. Stainless steel drain accommodates up to a 4 (102mm) diameter pipe, and features a removable perforated stainless steel basket. Comes with subway-style stainless steel grating or yellow fiberglass grating. Floor troughs with gray fiberglass grating available (in place of yellow). To order, add suffix G to model number of trough with yellow fiberglass grating. Example: ASFT-1224-FGG Floor troughs with ADA-approved T-Bar fiberglass grating* available. Gray color. To order, add suffix -ADA to end of model number. Example: ASFT-1224-FG-ADA Custom sizes available. Consult factory for details. * Available for Floor Troughs with Fiberglass Grating only. Catalog Specification Sheet No. EG25.01 Anti-splash Floor Troughs EAGLE GROUP 100 Industrial Boulevard, Clayton, DE 19938-8903 USA Phone: 302-653-3000 Fax: 302-653-2065 www.eaglegrp.com Foodservice Division: Phone 800-441-8440 MHC/Retail Display Divisions: Phone 800-637-5100 For custom configuration or fabrication needs, contact our SpecFAB Division. Phone: 302-653-3000 Fax: 302-653-3091 e-mail: specfab@eaglegrp.com EG25.01 Rev. 10/09 Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com Eagle Foodservice Equipment, Eagle MHC, SpecFAB, and Retail Display are divisions of Eagle Group. 2009 by the Eagle Group New Belgrade Elementary School J & V Restaurant Supply

Eagle Group ASFT-2430-SG Item#:32 Catalog Specification Sheet No. EG25.01 Anti-splash Floor Troughs Anti-splash Floor Troughs END VIEW TOP VIEW See chart below for dimensions A through F Item No.: Project No.: S.I.S. No.: Grating Used in Various Floor Troughs Floor Trough Floor Trough Grating Used (dimension E) (dimension F) - Quantity and Length 18 (457mm) 15 (381mm) one 15 (381mm) 24 (610mm) 21 (533mm) one 12 (305mm) 30 (762mm) 27 (686mm) three 9 (229mm) 36 (914mm) 33 (838mm) two 12 (305mm) three 12 (305mm) 48 (1219mm) 45 (1143mm) 60 (1524mm) 57 (1448mm) four 12 (305mm) 72 (1829mm) 69 (1753mm) five 12 (305mm) 84 (2134mm) 81 (2057mm) six 12 (305mm) 96 (2438mm) 93 (2362mm) seven 12 (305mm) 120 (3048mm) 117 (2972mm) nine 12 (305mm) 12 (305mm)-WIDE TROUGHS dimension A: 7 (178mm) dimension B: 9 (229mm) dimension C: 12 (305mm) 15 (381mm)-WIDE TROUGHS dimension A: 10 (254mm) dimension B: 12 (305mm) dimension C: 15 (381mm) 18 (457mm)-WIDE TROUGHS dimension A: 13 (330mm) dimension B: 15 (381mm) dimension C: 18 (457mm) 24 (610mm)-WIDE TROUGHS dimension A: 19 (483mm) dimension B: 21 (533mm) dimension C: 24 (610mm) dimension D: 11.25 (286mm) dimension D: 14.25 (362mm) dimension D: 17.25 (438mm) dimension D: 23.25 (591mm) WITH YELLOW * WITH WITH YELLOW * WITH WITH YELLOW * WITH WITH YELLOW * WITH FIBERGLASS STAINLESS FIBERGLASS STAINLESS FIBERGLASS STAINLESS FIBERGLASS STAINLESS dimension dimension GRATING GRATING GRATING GRATING GRATING GRATING GRATING GRATING E F model # model # model # model # model # model # model # model # in. mm in. mm ASFT-1218-FG ASFT-1218-SG n/a n/a n/a n/a n/a n/a 18 457 15 381 ASFT-1224-FG ASFT-1224-SG ASFT-1524-FG ASFT-1524-SG ASFT-1824-FG ASFT-1824-SG ASFT-2424-FG ASFT-2424-SG 24 610 21 533 ASFT-1230-FG ASFT-1230-SG ASFT-1530-FG ASFT-1530-SG ASFT-1830-FG ASFT-1830-SG ASFT-2430-FG ASFT-2430-SG 30 762 27 686 ASFT-1236-FG ASFT-1236-SG ASFT-1536-FG ASFT-1536-SG ASFT-1836-FG ASFT-1836-SG ASFT-2436-FG ASFT-2436-SG 36 914 33 838 ASFT-1248-FG ASFT-1248-SG ASFT-1548-FG ASFT-1548-SG ASFT-1848-FG ASFT-1848-SG ASFT-2448-FG ASFT-2448-SG 48 1219 45 1143 ASFT-1260-FG ASFT-1260-SG ASFT-1560-FG ASFT-1560-SG ASFT-1860-FG ASFT-1860-SG ASFT-2460-FG ASFT-2460-SG 60 1524 57 1448 ASFT-1272-FG ASFT-1272-SG ASFT-1572-FG ASFT-1572-SG ASFT-1872-FG ASFT-1872-SG ASFT-2472-FG ASFT-2472-SG 72 1829 69 1753 ASFT-1284-FG ASFT-1284-SG ASFT-1584-FG ASFT-1584-SG ASFT-1884-FG ASFT-1884-SG ASFT-2484-FG ASFT-2484-SG 84 2134 81 2057 ASFT-1296-FG ASFT-1296-SG ASFT-1596-FG ASFT-1596-SG ASFT-1896-FG ASFT-1896-SG ASFT-2496-FG ASFT-2496-SG 96 2438 93 2362 ASFT-12120-FG ASFT-12120-SG ASFT-15120-FG ASFT-15120-SG ASFT-18120-FG ASFT-18120-SG ASFT-24120-FG ASFT-24120-SG 120 3048 117 2972 * To order Floor Trough with Gray Fiberglass Grating, add suffix G. Example: ASFT1224-FGG To order Floor Trough with Gray ADA-approved wide T Bar Fiberglass Grating, add suffix -ADA. Example: ASFT1224-FG-ADA. Available for Floor Troughs with Fiberglass Grating only. EAGLE GROUP 100 Industrial Boulevard, Clayton, DE 19938-8903 USA Phone: 302-653-3000 Fax: 302-653-2065 www.eaglegrp.com Printed in U.S.A. Foodservice Division: Phone 800-441-8440 2009 by Eagle Group MHC/Retail Display Divisions: Phone 800-637-5100 Rev. 10/09 Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order. New Belgrade Elementary School J & V Restaurant Supply