RINGS AND TRAVELLERS. RING SPINNING. WE LIVE TEXTILE. EN
WE LIVE TEXTILE. Saurer Components is a world-leading supplier of components for filament and staple fiber spinning applications. With its headquarters in Fellbach, Germany, the group has five established brands; Accotex, Daytex, Fibrevision, Temco and Texparts and prides itself on supplying high-quality, reliable component products to the textile industry. Saurer Components has approximately 1 000 employees world-wide with manufacturing facilities and sales offices in the Americas, Europe and Asia. Via a network of experienced representatives it ensures prompt service and close contact with customers in spinning mills as well as leading machine manufacturers.
Rings and Travellers RINGS AND TRAVELLERS 3
Running Performance at its best Rings and Travellers are the dominant elements in the ring spinning process. Key to success is the reduction of the friction coefficient to the lowest level possible. At this point you will get the perfect balanced spinning geometry that means the spinning tension is on a constant balanced level. The reduction of friction will be achieved if the rings and travellers establish a symbiosis. Therefore the Saurer Components R&D focused on the ideal combination of rings and travellers. The aspired ideal friction stands for: - Higher traveller speed - Lower working temperature - Extended ring and traveller life time - Avoidance of yarn tension peaks - Better yarn quality (reduction of hairiness) - Reduction of end breaks Furthermore the ideal friction strikes the balance between: - Traveller drive angle to ring - Traveller weight - Traveller and ring geometry - Traveller and ring coating - Ring positioning 4 RINGS AND TRAVELLERS
Texparts Rings Benefits f f Highest contour accuracy - No variation in ring sizes - Perfect roundness means no vibration during spinning f f Outstanding flexibility due to new design - High speed spinning - All fibre materials and yarn types - Vast yarn count range Texparts Travellers Benefits f f One Design with different coatings - Optimized balance between traveller speed, lifetime and quality due to the smart design and coating f f Universal suitability - No time-consuming and complex management of diverse types - Time saving on every lot or traveller change - A reduction of the spare parts on stock Service Recommendations are available for our customers. A questionnaire with all relevant factors for the different ring and traveller types simplifies your selection. The sales engineers provide support at any time. f f The perfect symbiosis of Rings and Travellers - The perfect combination of the ideal ring and traveller had been already been defined - The hub from traveller to ring is at an ideal angle RINGS AND TRAVELLERS 5
Recommendation of use Spinning geometry 42 40 Traveller speed (in m/s)* 38 36 32 25 Yarn Count (in Ne) 6 7 10 12 16 20 24 30 36 40 50 60 80 105 110 120 45/42 Ring Diameter (in mm) 36/34 51/48 40/38 Flange 1 Flange Type Flange 1/2 Flange 2 * Maximum values, depending on material type and roving quality 6 RINGS AND TRAVELLERS
In perfect balance Several parameters have a direct influence on the spinning geometry, defined as the spinning tension at constant balanced level. The table above shows practical data on traveller speed, yarn count, ring diameter and flange type. Traveller Driving Angle The statement as wider the driving angle as lower the friction has generality. The symbiosis of Rings and Travellers ensure: - A wide traveller driving angle for an increasing traveller speed - Less stress peaks - Reduction of end breaks - Higher yarn quality due to the reduced hairiness These advantages are the direct effect of the perfect combination of Texparts Rings and Travellers. Driving Angle of 67 Conventional rings and travellers Driving Angle of 68 Conventional rings and travellers Driving Angle of 77 Texparts Rings and Travellers RINGS AND TRAVELLERS 7
Coatings Ring Coating The ring and traveller system in the short staple spinning process operates dry. Fiber debris from the yarn along with natural fiber waxes like cotton pectin or spinning oil from man-made fibers are accumulated on the traveller / ring system. The degree and the quality of accumulation depend on the ring coating, traveller shape and coating, besides others. The Texparts Ring Coating Mach 1 includes: Deposit function The deposit function supports the lubrication. Ring Coating Mach 1 with deposit bags Orange skin The orange skin function reduces the contact area between ring and traveller. This ensures less friction and thus an extended serviceable life. Ring Coating Mach 1 with orange skin surfaces Benefits ff No running-in time f f Longer serviceable life for ring and traveller f f Consistent smooth running behavior 8 RINGS AND TRAVELLERS
Traveller Coating Compared to conventional travellers the Texparts Traveller Coating enables reduced running-in time. During the running-in phase of the traveller the system will be lubricated by the fiber. There are two traveller types for different running speeds available: Marathon Chemical deposit plating for compact yarn and for all applications in which longer lifetime is required. The optimum quality for a higher performance. Traveller Coating Marathon Sprint Nickel plated traveller for all standard applications. Excellent service life time, smooth yarn path and good heat dissipation are the main features. Traveller Coating Sprint Benefits f f Extend ring and traveller life time f f Increasing and stable yarn quality ff End breaks at standard level RINGS AND TRAVELLERS 9
Product portfolio Texparts Travellers Type Flange No. Description CP 2 hf Flange 2 15-10/0 Texparts Travellers are suitable for all CP 1 hf Flange 1 5-15/0 kind of fiber material. The selection of the best type for your yarn and application CC 1 hf Flange 1 5-23/0 is accomplished through the traveller number. If a required traveller CC 1/2 hf Flange 1/2 2-30/0 number is not listed please contact us. According to the running speed all travellers are available as marathon or sprint type. Texparts Rings Flange 1 (b = 3.2 mm) Ring dimensions [mm] d * D * h 32*51*10 42*54*10 40*48*9 36*47*8 d b 35*51*10 42*60*10 40*51*9 36*54*8 h 35*54*10 45*54*10 40*54*9 38*47*8 36*51*10 45*60*10 41*48*9 38*51*8 36*54*10 48*57*10 41*51*9 38*54*8 38*51*10 48*60*10 41*54*9 40*51*8 38*54*10 51*60*10 42*48*9 40*54*8 38*60*10 34*48*9 42*51*9 42*51*8 D D = fitting ø h = ring height h s = fitting height b = flange width d = inside ring ø 40*51*10 36*48*9 42*54*9 42*54*8 40*54*10 38*48*9 45*51*9 42*51*10 38*51*9 45*54*9 Flange ½ (b = 2.6 mm) Ring dimensions [mm] d * D * h 32*51*10 36*48*9 38*54*10 42*51*10 35*51*10 38*48*9 38*60*10 42*54*10 35*54*10 38*51*10 40*54*10 Flange 2 (b = 4.1 mm) Ring dimensions [mm] d * D * h 42*54*10 45*54*10 51*60*10 10 RINGS AND TRAVELLERS
Saurer Components GmbH Maria-Merian-Str. 8 70736 Fellbach Germany T +49 711 58521 0 F +49 711 58521 59 info.texparts@saurer.com www.saurer.com Saurer (Jiangsu) Textile Machinery Company Limited Shanghai Branch Company 36F, Tower B, The HQ No. 100 Zunyi Road Shanghai 200051 P. R. China T +86 21 22262500 F +86 21 22262512 www.saurer.com Subject to alterations Reprint only with expressed permission of Saurer Components Texparts-BR-RingsTravellers-EN-digital-170322 Saurer (Jiangsu) Textile Machinery Company Limited No. 9 Chang Yang Street Suzhou Industrial Park 215024 Suzhou Jiangsu Province P. R. China T +86 512 8188 5688 F +86 512 8188 5698 www.saurer.com Saurer Textile Solutions Pvt Ltd 105 Mettupalayam Road Thudiyallur Coimbatore 641 034 India T +91 422 3074000 F +91 422 2644578 M +91 93441 93444 www.saurer.com