STAND BEHIND YOUR WORK WOODWORKING 2018 SAVINGS JULY 1 - DECEMBER 31, 2018

WOODWORKING 2018 SAVINGS JULY 1 - DECEMBER 31, 2018 STAND BEHIND YOUR WORK 550+ SERVICE CENTERS NATIONWIDE INDUSTRY-LEADING WARRANTIES EXPERT TECHNICAL SERVICE

22" SCROLLSAW Upper blade holder clamps and tensions blade in one step (Patent Pending). Removable lower blade holder snaps quickly and securely in to place. Slotted table for easier and quicker blade changes 22 3/8" throat capacity. Arm tilts 45 right and 40 left, keeping the work table flat for more accurate cutting. Integrated blade storage features slots for pre-loaded blades and a built-in wrench for changing blades. Blade storage can be positioned on the right or left of the machine. Top lift, spring loaded arm raises 10" and stays up until pulled back down. Removable dust port on underside of table to collect dust at the source. Stand can be adjusted to 4 different heights - 24-3/4", 26-3/4", 28-3/4", or 31-3/4" (using the leveling feet). Variable speed range of 400 1550 strokes per minute. 2" maximum cutting depth. Conveniently located speed and tension controls. Included Equipment: Two Lower Blade Holders, Material Hold Down, Onboard Dust Blower, Foot Switch. $979.99 STOCK NO. 727200K 727200K JWSS-22 Scroll Saw with Stand and Foot Switch $979.99 727200B JWSS-22B Scroll Saw with Foot Switch $879.99 727201 JWSS Lower Blade Holder (set of 3) $24.99 727200S JWSS-22S Scroll Saw Stand $99.99 2 JET WOODWORKING

1840 WOODWORKING LATHES Sliding headstock pivots 360 degrees with seven positive locking positions. Extended spindle nose houses dual headstock spindle bearings. Four inch cast iron risers allow user to adjust height of lathe for maximum comfort. Improved tailstock quill locking mechanism incorporates an anti-rotation key. Tailstock features Acme threads for smooth and durable movement. Banjo uses non-marring, positive locking wedge system to securely hold tool post. Tool post locking mechanism designed for year of consistent strength. Newly designed headstock locking handle accessible from front of lathe. Remote emergency stop button can be situated along the lathe bed. Spindle lock latch frees up both hands. Variable speed from 40 3200 RPM. 36 integrated indexing positions. Convenient leg-mounted tool holder. Conveniently located digital readout. Rubber tool mat on top of headstock. $3,159.99 STOCK NO. 719600 *719600 ONLY LATHE GUARD Mounts on bracket to headstock Easily flips away when not in use TAILSTOCK SWING AWAY Heavy duty Fits JET 14" and larger lathes 20" EXTENSION BED WITH POST Extends turning capacity to 60" Tool rest post included 719600 JWL-1840EVS Lathe 2HP, 230V $3,159.99 719650 JWL-1840DVR Lathe 2HP, 230V $3,499.99 719401 20" Extension Bed with Post $289.99 719001 Tailstock Swing Away $299.99 719002 Lathe Guard $99.99 719601 Comparator Bracket $149.99 JET JETTOOLS.COM 3

1640EVS WOODWORKING LATHE Sliding headstock pivots 360 degrees with seven positive locking positions. Extended spindle nose houses dual headstock spindle bearings. Improved tailstock quill locking mechanism incorporates an anti-rotation key. Tailstock features Acme threads for smooth and durable movement. Banjo uses non-marring, positive locking wedge system to securely hold tool post. Tool post locking mechanism designed for year of consistent strength. Spindle lock latch frees up both hands. Electronic infinitely variable speed from 40 3200 RPM. 36 integrated indexing positions. Newly designed headstock locking handle accessible from front of lathe. Convenient leg-mounted tool holder. Inverter is enclosed for added protection. Conveniently located digital readout. Rubber tool mat on top of headstock. $2,649.99 STOCK NO. 719500 719500 JWL-1640EVS 16" x 40" Electronic Variable Speed Wood Lathe, 1.5HP 1PH 115V $2,649.99 LATHE GUARD Mounts on bracket to headstock Easily flips away when not in use TAILSTOCK SWING AWAY Heavy duty Fits JET 14" and larger lathes 20" EXTENSION BED WITH POST Extends turning capacity to 60" Tool rest post included 719401 20" Extension Bed with Post $289.99 719001 Tailstock Swing Away $299.99 719002 Lathe Guard $99.99 708331 BBC-2 Live Center MT-2 $19.99 4 JET WOODWORKING

1440VS WOODWORKING LATHES Sliding headstock pivots 360 degrees with 7 positive locking positions at 0, 30, 60, 90, 120, 180, and 270 degrees for maximum variability and optimal user comfort. Variable speed from 400-3000 RPM. Positive locking tool rest with redesigned clamping. Extension bed takes the capacity to 60" between centers. ACME thread in tailstock. Improved tailstock quill locking with anti-rotation key. Easy-to-read RPM display. CSA Certified. 719400 JWL-1440VS 14" x 40" Benchtop Variable Speed Wood Lathe, 1HP 1PH 115/230V $1,399.99 719400K JWL-1440VSK 14" x 40" Variable Speed Wood Lathe with Legs, 1HP 1PH 115/230V $1,699.99 719402 JWL-1440VS Leg Set $399.99 $1,699.99 STOCK NO. 719400K 1221VS WOODWORKING LATHE Unrivaled speed control. 60-3600 RPM variable speed. Optimally designed speed ranges. Forward to reverse is a smooth transition. Innovative ratchet style belt tension system (patent pending). Integrated, spring loaded spindle lock. $879.99 STOCK NO. 719200 719200 JWL-1221VS 12'' x 21'' Variable Speed Wood Lathe, 1HP, 115V $879.99 719202A JWL-1221VS Stand $269.99 719203A JWL-1221VS Stand Extension $99.99 719201 JWL-1221VS Bed Extension $199.99 719202 JWL-1221VS Stand $369.99 719203A JWL-1221VS Stand Extension $119.99 1015 AND 1015VS WOODWORKING LATHES 15 ½" between centers. Integrated 24 position indexing. 1015 has six spindle speeds 50, 840,1240, 1800, 2630 and 3975. 1015 VS has a variable RPM range of 200-3600. Wider bed ways for increased stability. Improved tensioning system with easier access to belts. Sturdy tool rest base. $619.00 STOCK NO. 719110 719100 JWL-1015 Lathe $499.99 719110 JWL-1015VS Lathe $619.99 719101 JWL-1015 Bed Extension $159.99 719102A JWL-1015 Stand $299.99 719103A JWL-1015 Stand Extension $139.99 JET JETTOOLS.COM 5

CYCLONE DUST COLLECTORS The cyclone s two stage separation provides more working CFM than comparable horsepower single stage units. Heavy debris is pulled down to collection drum before debris stream reaches the filter, providing constant suction. Direct mounted filter allows unrestricted airflow, increasing system efficiency. Fine dust particles are filtered through pleated material that captures even the smallest particles down to 1 micron and below. Heavy debris is captured in steel drum with quick release levers and independent casters for quick emptying. Radio frequency remote control turns on dust collection from up to 50 feet away. Remote timer settings allows system to run for 2, 4, 6, or 8 hours before automatic shutoff (2HP and 3HP models only). Double paddle manual cleaning system quickly cleans the pleated filter. Swivel casters make it easy to move the unit around the shop. $1,579.99 STOCK NO. 717520 DIRECT MOUNTED FILTER ELIMINATES INEFFICIENCIES FROM FLEX HOSE AND BENDS. 717515 JCDC-1.5 Cyclone Dust Collector, 1.5HP, 115V $1,179.99 717520 JCDC-2 Cyclone Dust Collector, 2HP, 230V $1,579.99 717530K JCDC-3 Cyclone Dust Collector Kit, 3HP, 230V $1,799.99 717511 Canister Collection Bag for JCDC-1.5, JCDC-2, JCDC-3 (pack of 5) $14.99 717516 Drum Collection Bag for JCDC-1.5 (pack of 5) $17.99 717521 Drum Collection Bag for JCDC-2 (pack of 5) $24.99 717531 Drum Collection Bag for JCDC-3 (pack of 5) $29.99 6 JET WOODWORKING

DC-1100VX AND DC-1200VX VORTEX CONE DUST COLLECTORS Industrial-quality construction effectively handles collection of wood chips and sawdust. Quick-install collection bag makes emptying and re-attaching a snap. Single-stage design for economical and quiet operation. Includes four casters for maneuverability and total portability. High air velocity (CFM) design stands up to any competitive specifications. Permanently lubricated, totally enclosed, fan-cooled motors are rated for continuous-duty. Optional canister filter offers superior dust collection by capturing particles as small as 2 microns. Optional Remote Control is Radio Frequency, no need for line of sight to turn machine on and off. $549.99 STOCK NO. 708657K $749.99 STOCK NO. 708659K 708657K DC-1100VX-BK Dust Collector, 1.5HP 1PH 115/230V, 30-Micron Bag Filter Kit $549.99 708658K DC-1100VX-5M Dust Collector, 1.5HP 1PH 115/230V, 5-Micron Bag Filter Kit $579.99 708659K DC-1100VX-CK Dust Collector, 1.5HP 1PH 115/230V, 2-Micron Canister Kit $749.99 710701K DC-1200VX-BK1 Dust Collector, 2HP 1PH 230V, 30-Micron Bag Filter Kit $579.99 710702K DC-1200VX-CK1 Dust Collector, 2HP 1PH 230V, 2-Micron Canister Kit $799.99 710703K DC-1200VX-BK3 Dust Collector, 2HP 3PH 230/460V, 30-Micron Bag Filter Kit $599.99 710704K DC-1200VX-CK3 Dust Collector, 2HP 3PH 230/460V, 2-Micron Canister Kit $799.99 DC1100-CA Vortex Cone Retrofit Kit, Fits Dust Collectors with 20" Housing $29.99 708636C RF Remote Control for 115V Dust Collector $99.99 708636D RF Remote Control for 220V Dust Collectors $119.99 Aids in quick fallout of chips into the collector bag instead of clogging the filter bag or canister JET JETTOOLS.COM 7

DC-650 DUST COLLECTORS Hook up one to three machines for optimum dust cleaning. Quick-install collection bag makes emptying and reattaching a snap. Single-stage design for economical and quiet operation. Includes four casters for easy maneuverability and total portability. $579.99 STOCK NO. 708642CK 708642BK DC-650 Dust Collector, 1HP 1PH 115/230V, 30-Micron Bag Filter Kit $379.99 708642MK DC-650 Dust Collector, 1HP 1PH 115/230V, 5-Micron Bag Filter Kit $429.99 708642CK DC-650 Dust Collector, 1HP 1PH 115/230V, 2-Micron Canister Kit $579.99 708642B 30-Micron Filter & Collection Bag Kit, DC-650 $99.99 708642MF 5-Micron Filter & Collection Bag Kit DC-650 $49.99 708737C 1-Micron Canister Filter Kit for DC-650 $279.99 AIR FILTRATION Disposable Electrostatic Outer Filter attracts more dust particles than standard filters. Inner Pocket Filter is removable for easy cleaning. Remote Control has built-in timer with 2, 4, and 8-hour settings; automatically shuts system off at the end of the time setting. Fully-Enclosed Ball Bearing Motor with Overload Protection for long, dependable service. $419.99 STOCK NO. 708620B 708620B AFS-1000B, Air Filtration System, 3-Speed, Remote Control $419.99 708615 AFS-2000, Air Filtration System, 3-Speed, Remote Control $719.99 REMOTE CONTROL AFS-1000B 708731 Electrostatic Outer Filter for AFS-1000B $19.99 708732 Electrostatic Outer Filter, Washable, for AFS-1000B $49.99 708733 Inner Filter for AFS-1000B $59.99 AFS-2000 708722 Electrostatic Outer Filter for AFS-2000 $49.99 708723 Inner Filter for AFS-2000 $99.99 708724 Electrostatic Outer Filter, Washable, for AFS-2000 $129.99 8 JET WOODWORKING

DUST COLLECTION 709565 Collection Bag, Clear Plastic 14" Diameter (pack of 5) $19.99 709563 Collection Bag, Clear Plastic 20" Diameter (pack of 5) $19.99 708695 Filter Bag, 30-Micron, for DC-650 $69.99 708701 Filter Bag, 5-Micron, for DC-650 $109.99 708697 Collection Bag for DC-650 $59.99 708697A Snap In Collection Bag for DC-650 $49.99 709562 Filter Bag, 30-Micron, for DC-1100, DC-1100VX $89.99 709564 Collection Bag for DC-1100, DC-1100VX $89.99 708698 Filter Bag, 30-Micron, for DC-1200, DC-1200VX $89.99 708699A Collection Bag for DC-1200, DC-1200VX, 1900,5000,5600 $89.99 708706 Filter Bag, 5-Micron, for DC-1100, DC-1100VX, DC-1200, DC-1200VX $109.99 708699 Collection Bag for DC-1200,1900,5000,5600 $89.99 708738 Canister Filter for DC-650TS $179.99 708654 5 Micron Filter Bag for JC-3 $439.99 709563 708636C JW1007 JW1034 JW1317 JW1000 4" TO 2-1/4"OD - 2"ID Reducer $5.99 JW1007 4" Blastgate $6.99 JW1013 4" T Fitting $9.99 JW1015 4" Y Fitting $7.99 JW1017 4" Elbow Fitting $5.99 JW1019 4" Splice Fitting $5.99 JW1022 4" Hose Clamp $1.99 JW1031 4" x 10' Hose $29.99 JW1032 4" x 20' Hose $39.99 JW1034 4" x 10' Clear Hose $49.99 JW1043 4" Connector Sleeve $5.99 JW1047 4" Quick Disconnect - Spiral End $4.99 JW1049 2- Stage Dust Collection Hood $39.99 JW1053 D.C. Grounding Kit $29.99 JW1142 4" Aluminum Blastgate $14.99 JW1317 4" Wire Clamp $1.99 CAUTION: All plastic fittings and hoses must be grounded against static electrical build-up JET JETTOOLS.COM 9

17" DRILL PRESS Spindle travels a full 5" with one revolution of the handle. Large 14" x 19" precision ground work table features twin T-slot grooves and 4 table slots to accommodate any project. One-handed belt tensioning allows for rapid speed changes. Power switch features a safety key and large, paddle style off button. Integrated depth stop makes repetitive drilling quick and easy. Xacta-X laser system easily identifies the drill center. Long-lasting, built-in LED work light reduces shadows. Table edge lip designed to make clamping easy. Replaceable MDF table insert. Large cast iron base provides stability. Powered by an efficient 3/4HP, 1PH, 115V TEFC motor and poly-v belt drive system. CSA Certified. $799.99 STOCK NO. 716300 5" SPINDLE Full 5" Travel with One Handle Revolution Improved Spindle Locking System with Integrated Depth Stop Laser-Etched Downfeed Scale DRIVE SYSTEM Poly-V Drive Belt One-Handed Tensioning System Improved Access WORK TABLE 90 Left and Right Tilt Adjustment Designed for Clamping T-Slots Accept Standard Fasteners 716300 JDP-17 17" Drill Press, 3/4HP $799.99 10 JET WOODWORKING

15" DRILL PRESSES Spindle travels a full 3-1/8" with one revolution of the handle. Large 12-1/2" x 17" precision ground work table features twin T-slot grooves and 4 table slots to accommodate any project. One-handed belt tensioning allows for rapid speed changes. Power switch features a safety key and large, paddle-style off button. Integrated depth stop makes repetitive drilling quick and easy. Xacta-X laser system easily identifies the drill center. Long-lasting, built-in LED work light reduces shadows. Table edge lip designed to make clamping easy. Replaceable MDF table insert. Large cast iron base provides stability. Powered by an efficient 3/4HP, 1PH, 115V TEFC motor and poly-v belt drive system. CSA Certified $629.99 STOCK NO. 716200 $699.99 STOCK NO. 716250 716200 JDP-15B, 15" Benchtop Drill Press $629.99 716250 JDP-15F, 15" Floorstanding Drill Press $699.99 12" BENCHTOP VARIABLE SPEED DRILL PRESS Compact benchtop design allows for easy transport to different shop locations. Heavy-Duty 1/3 HP induction motor for various drilling applications. Mechanical variable speed drive system for easy speed changes. X-shaped XACTA Laser ensures drilling accuracy. Digital readout displays spindle speed for different drilling applications. Stable base design allows for easy re-positioning on workbench. $429.99 STOCK NO. 716000 716000 JWDP-12, 12" Bench Top Drill Press $429.99 JET JETTOOLS.COM 11

BENCHTOP MORTISER Heavy-duty cast iron and steel construction provides durability and stability during use. Dependable rack-and-pinion head adjustment gives you accurate position control. Long, multi-position mortising handle lets you reposition the feed handle for easier operation and optimum handle position. Three-jaw drill chuck keeps a positive grip on mortising bits with up to 3/8" diameter shanks. $359.99 STOCK NO. 708580 708580 JBM-5, Benchtop Mortiser, 1/2HP 1PH 115V $359.99 708594 Mortise Chisel and Bit 3/4" $59.99 708585 Mortise Chisel and Bit Kit, set of 5, (1/4", 5/16", 3/8", 1/2", 3/4") $159.99 8" WOODWORKING BENCH GRINDER 1725 RPM, optimal for sharpening common tool steels. Includes two high quality Norton wheels. Oversized Tool Rests with integrated angle indicator. Machined tool rest surface with reference lines. Durable cast iron wheel covers. Built in spark arrestors. $369.99 STOCK NO. 726100 726100 JWBG-8 8" WW Bench Grinder with Norton Wheels $369.99 Norton is a registered trademark of Saint-Gobain TOOL REST Integrated angle indicator Reference lines Patent pending 12 JET WOODWORKING

OSCILLATING SPINDLE SANDER Baffles create a chamber under the table for improved dust collection. 4" dust port connects to your dust collection system to keep your work area clean.. Spindle lock for quick and easy spindle changes. Table tilts 45 front and 15 back and features a 90 quick index. Integrated storage provides designated slots for spindles and table inserts. Sealed access door minimizes dust in the storage area. 1-1/2" oscillating action reduces friction heat to protect wood and prolong sleeve life. Main spindle support runs on precision ball bearings and is oscillated by a heavy-duty worm and gear mechanism for consistent performance. Integrated paddle switch with safety key. Powerful 1HP motor is independently mounted inside the base for easy access and service. Includes 1/4", 3/8", 1/2", 5/8", 3/4", 1", 1-1/2", 2", 3", and 4" spindle assemblies. Spindles have threaded ends for quick, easy changes. Worm and gear mechanism runs in an oil bath to prolong its life and durability. $1,699.99 STOCK NO. 723950 SPINDLE Spindle Lock Only One Wrench Needed for Changes Includes 1/4", 3/8", 1/2", 5/8", 3/4", 1", 1-1/2", 2", 3", and 4" Spindle Assemblies TABLE 45 Front, 15 Back 90 Quick Index Increased Spindle Access INTEGRATED STORAGE Designated Slots for Each Spindle and Insert Magnetic Strip for Wrenches Sealed Access Door 723950 JOSS-S Floor Spindle Sander, 1HP $1,699.99 JET JETTOOLS.COM 13

1632 DRUM SANDER Conveyor bed parallelism is easily adjusted by turning the dial on the outside of the bed - no tools required. Parallelism adjust dial features a stop to quickly return the conveyor bed to a flat position. Dust hood includes an integrated channel that mirrors the shape of the drum and directs chips and dust to the 4" collection port. Precision-machined and dynamically balanced extruded aluminum drum is designed to dissipate heat and protect the work surface from heat-damage. Die cast drum carriage design is optimized for rigidity to provide years of consistent quality. Precision-flattened reinforced steel conveyor bed. Redesigned conveyor system pulls the workpiece through the sander instead of pushing. One rotation of the top-position handwheel adjusts the drum height by 1/16". The relative depth scale on the handwheel allows the user to reset and measure the depth for every project. $1,149.99 STOCK NO. 723520K 723520K JWDS-1632 Drum Sander, 1.5HP 1PH 115V, Open Stand $1,149.99 723521 Infeed/Outfeed Tables for JWDS-1632 & JWDS-1836 $129.99 98-0130 Casters, Set of 4 $139.99 SANDSMART INFINITELY VARIABLE-FEED CONTROL PRODUCES THE ULTIMATE FINISH AT A RATE OF UP TO 10 FEET PER MINUTE AND PREVENTS MACHINE OVERLOAD 1836 DRUM SANDER Sandsmart control continuously monitors the load on the drum motor and automatically regulates the speed of the conveyor motor to maintain the highest feed rate without overload. Conveyor bed parallelism is easily adjusted by turning the dial on the outside of the bed - no tools required. Parallelism adjust dial features a stop to quickly return the conveyor bed to a flat position. Dust hood includes an integrated channel that mirrors the shape of the drum and directs chips and dust to the 4" collection port. Precision-machined and dynamically balanced extruded aluminum drum is designed to dissipate heat and protect the work surface from heat-damage. Precision-flattened reinforced steel conveyor bed. Redesigned conveyor system pulls the workpiece through the sander instead of pushing. One rotation of the top-position handwheel adjusts the drum height by 1/16". $1,349.99 STOCK NO. 723530K 723530K JWDS-1836 Drum Sander, 1-3/4HP 1PH 115V, Open Stand $1,349.99 723521 Infeed/Outfeed Tables for JWDS-1632 & JWDS-1836 $129.99 SANDSMART INFINITELY VARIABLE-FEED CONTROL PRODUCES THE ULTIMATE FINISH AT A RATE OF UP TO 10 FEET PER MINUTE AND PREVENTS MACHINE OVERLOAD 14 JET WOODWORKING

22-44 PRO DRUM SANDER SandSmart Infinitely variable-feed control produces the ultimate finish at a rate of up to 10 feet per minute and prevents machine overload. Conveyor belt TRACKERS dramatically reduce the need for manual belt adjustments. 22" wide suspended drum is supported on both ends with a truss-like carriage arm for greater strength and easy alignment to the table surface for consistent performance. Large cast-iron handwheel adjusts height at 3/32" per turn for precise sanding thickness control. $2,599.99 STOCK NO. 649600 22-44 OSCILLATING DRUM SANDER Oscillating feature reduces heat build-up on sanding belt to reduce loading and burning. SandSmart infinitely variable-feed control produces the ultimate finish at a rate up to 10 feet per minute and prevents machine overload. Conveyor belt TRACKERS dramatically reduce the need for manual belt adjustments. 1" of oscillating stroke. Precision-flattened reinforced steel conveyor bed and no-give power feed belt provide a constant smooth sanding action for better results. $2,239.99 STOCK NO. 659006K 659006K 22-44 OSC Oscillating Drum Sander, 1.75HP 1PH 115V $2,239.99 98-2202 Infeed/Outfeed Tables, 22-44 OSC, 22-44 Plus $119.99 10-20 PLUS BENCHTOP SANDER Infinitely variable-speed control produces the ultimate finish at a rate up to 12 feet per minute and prevents machine overload. Conveyor belt TRACKERS dramatically reduce the need for manual belt adjustments. Precision-machined and balanced extruded aluminum drum is self-cooling to protect the surface being sanded from heat-damage. $799.99 STOCK NO. 628900 628900 10-20 Plus Benchtop Sander, 1HP 1PH 115V $799.99 638004 Open Stand with Shelf for 10-20 Plus $169.99 JET JETTOOLS.COM 15

22-44 PLUS DRUM SANDERS SandSmart Infinitely variable-feed control produces the ultimate finish at a rate of up to 10 feet per minute and prevents machine overload. Conveyor belt TRACKERS dramatically reduce the need for manual belt adjustments. Precision-machined and balanced extruded aluminum drum is selfcooling to protect the surface being sanded from heat-damage. Adjustable drum height and downward pressure feature virtually eliminates snipe. Large cast-iron handwheel adjusts height at 1/16" per turn for precise sanding thickness control. One feed and one drive motor for superior sanding control. Sealed and permanently lubricated drum ball bearings for longer life. Precision-flattened reinforced steel conveyor bed and no-give power feed belt provide a flat sanding surface for better results. Abrasive take-up fasteners make changing abrasives quick and easy. On/off switch with overload protection is front-mounted for operator s convenience. Continuous-duty, 1-3/4HP motor is designed for heavier use for longer periods of time. $1,969.99 STOCK NO. 649005K SHOWN WITH OPTIONAL INFEED/OUTFEED TABLES $1,749.99 STOCK NO. 649004K 649003K 22-44 PLUS Benchtop Drum Sander, 1.75HP 1PH 115V $1,669.99 649004K 22-44 PLUS Drum Sander, 1.75HP 1PH 115V, Open Stand $1,749.99 649005K 22-44 PLUS Drum Sander, 1.75HP 1PH 115V, Closed Stand $1,969.99 98-2202 Infeed/Outfeed Tables, 22-44 OSC, 22-44 Plus $119.99 98-0130 Casters, Set of 4 $139.99 98-2201 Infeed/Outfeed Tables, 22-44 Pro $109.99 609004 Open Stand with Shelf for 22-44 PLUS $179.99 609005 Closed Stand for 22-44 PLUS $439.99 659006S Closed Stand for 22-44 OSC $449.99 ALL 22-44 SANDERS INCLUDE: BENCHTOP OSCILLATING SPINDLE SANDER 1" oscillating action reduces friction heat to protect wood and prolong sleeve life. Main spindle support runs on precision ball bearings and is oscillated by a heavyduty worm and gear mechanism for consistent performance. Oscillation gears run in a sealed lubricated box to prolong their life and durability. Table tilts to 45 to accommodate bevel sanding projects. Removable on/off safety switch prevents accidental start-up. Powerful 1/2HP induction motor easily handles the toughest sanding projects. $529.99 STOCK NO. 708404 708404 JBOS-5, Benchtop Oscillating Spindle Sander, 1/2HP 1PH 115V $529.99 709534 Spindle Assembly 3" for JBOS-5 Sander $69.99 16 JET WOODWORKING

OSCILLATING EDGE SANDER Oscillating feature reduces heat build-up on sanding belt to reduce loading and burning which increases belt life. Quick release lever and tracking control dial are conveniently located for replacing and tracking belts. Belt platen is made from precision-ground steel plate for strength and durability. Graphite covered steel platen runs cooler increasing machine and belt life. Cast iron table moves up or down to provide exact workpiece positioning. 4" dust port hooks up to your dust collection system for efficient dust removal. Adjustable outer drum support table enables contour sanding. Tilting sanding head for sanding bevels, angles and flat surfaces. $1,079.99 STOCK NO. 708447 708447 OES-80CS, Oscillating Edge Sander, 1.5HP 1PH 115/230V $1,079.99 708118 JMB-UMB Universal Mobile Base $89.99 COMBINATION 6" x 48" BELT/ 9" & 12" DISC SANDERS Large cast iron table has preset stops at 90 and 45 to let you use the belt sander vertically, horizontally, or anywhere in between. Dual thumbscrew belt tracking adjustment locks to keep belt on track during use. Graphite covered platen runs cooler increasing machine and belt life. Built-in casters for easy mobility. 708595 JSG-96, Benchtop 6" x 48" Belt / 9" Disc Sander, 3/4HP 1Ph, 115V $759.99 708596K JSG-96OS, 6" x 48" Belt / 9" Disc Sander with Open Stand, 3/4HP 1Ph, 115V $859.99 708597K JSG-96CS, 6"x48" Belt/ 9" Disc Sander, 3/4HP 1PH 115V, Closed Stand $929.99 708599 JSG-6DC, 6" x 48" Belt / 12" Disc Sander, 1-1/2HP, 1Ph 115/230V $1,199.99 708599K JSG-6DCK, 6"x48" Belt / 12" Disc Sander, 1.5HP 1PH 115/230V, Open Stand $1,299.99 708598K JSG-6CS, 6" x 48" Belt / 12" Disc Sander with Closed Stand, 1.5HP 1PH 115/230V $1,499.99 708596 OS-96, Open Stand for JSG-96 Sander $179.99 708597 CS-96, Closed Stand for JSG-96 Sander $359.99 708566 JSG-6, Open Stand for JSG-96 Sander $219.99 708598 JSG-6DC-CS Closed Stand with Casters for JSG-6 Sander $389.99 $929.99 STOCK NO. 708597K JET JETTOOLS.COM 17

SPINDLE SLEEVES 575891 Sanding Sleeves, 1/4" x 6", 60 Grit (4 pack) $14.99 575893 Sanding Sleeves, 1/4" x 6", 100 Grit (4 pack) $14.99 575894 Sanding Sleeves, 1/4" x 6", 150 Grit (4 pack) $14.99 575896 Sanding Sleeves, 3/8" x 6", 60 Grit (4 pack) $14.99 575898 Sanding Sleeves, 3/8" x 6", 100 Grit (4 pack) $14.99 575899 Sanding Sleeves, 3/8" x 6", 150 Grit (4 pack) $14.99 575901 Sanding Sleeves, 1/2" x 6", 60 Grit (4 pack) $14.99 575903 Sanding Sleeves, 1/2" x 6", 100 Grit (4 pack) $14.99 575904 Sanding Sleeves, 1/2" x 6", 150 Grit (4 pack) $14.99 575906 Sanding Sleeves, 5/8" x 6", 60 Grit (4 pack) $14.99 575908 Sanding Sleeves, 5/8" x 6", 100 Grit (4 pack) $14.99 575909 Sanding Sleeves, 5/8" x 6", 150 Grit (4 pack) $14.99 575911 Sanding Sleeves, 3/4" x 9", 60 Grit (4 pack) $19.99 575913 Sanding Sleeves, 3/4" x 9", 100 Grit (4 pack) $19.99 575914 Sanding Sleeves, 3/4 x 9", 150 Grit (4 pack) $19.99 575916 Sanding Sleeves, 1" x 9", 60 Grit (4 pack) $19.99 575918 Sanding Sleeves, 1" x 9", 100 Grit (4 pack) $19.99 575919 Sanding Sleeves, 1"x 9", 150 Grit (4 pack) $19.99 575921 Sanding Sleeves, 1-1/2" x 5-1/2", 60 Grit (4 pack) $16.99 575923 Sanding Sleeves, 1-1/2" x 5-1/2",100 Grit (4 pack) $14.99 575924 Sanding Sleeves, 1-1/2" x 5-1/2",150 Grit (4 pack) $16.99 575926 Sanding Sleeves, 1-1/2" x 9", 60 Grit (4 pack) $19.99 575928 Sanding Sleeves, 1-1/2" x 9", 100 Grit (4 pack) $19.99 575929 Sanding Sleeves, 1-1/2" x 9", 150 Grit (4 pack) $19.99 575931 Sanding Sleeves, 2" x 5-1/2", 60 Grit (4 pack) $19.99 575933 Sanding Sleeves, 2" x 5-1/2", 100 Grit (4 pack) $19.99 575934 Sanding Sleeves, 2" x 5-1/2", 150 Grit (4 pack) $19.99 575936 Sanding Sleeves, 2" x 9", 60 Grit (4 pack) $24.99 575938 Sanding Sleeves, 2" x 9", 100 Grit (4 pack) $24.99 575939 Sanding Sleeves, 2" x 9", 150 Grit (4 pack) $24.99 575941 Sanding Sleeves, 3" x 5-1/2", 60 Grit (4 pack) $19.99 575943 Sanding Sleeves, 3" x 5-1/2", 100 Grit (4 pack) $19.99 575944 Sanding Sleeves, 3" x 5-1/2", 150 Grit (4 pack) $19.99 575946 Sanding Sleeves, 3" x 9", 60 Grit (4 pack) $34.99 575948 Sanding Sleeves, 3" x 9", 100 Grit (4 pack) $34.99 575949 Sanding Sleeves, 3" x 9", 150 Grit (4 Pack) $34.99 575951 Sanding Sleeves, 4" x 9", 60 Grit (3 pack) $39.99 575953 Sanding Sleeves, 4" x 9", 100 Grit (3 pack) $39.99 575954 Sanding Sleeves, 4" x 9", 150 Grit (3 pack) $39.99 18 JET WOODWORKING

22-44 PLUS, PRO, AND OSCILLATING DRUM SANDERS 60-2036 Ready-To-Wrap Abrasive, 36 Grit (3 pack) $29.99 60-2060 Ready-To-Wrap Abrasive, 60 Grit (3 pack) $29.99 60-2080 Ready-To-Wrap Abrasive, 80 Grit (3 pack) $29.99 60-2100 Ready-To-Wrap Abrasive, 100 Grit (3 pack) $29.99 60-2120 Ready-To-Wrap Abrasive, 120 Grit (3 pack) $29.99 60-2150 Ready-To-Wrap Abrasive, 150 Grit (3 pack) $29.99 60-2180 Ready-To-Wrap Abrasive, 180 Grit (3 pack) $29.99 60-2220 Ready-To-Wrap Abrasive, 220 Grit (3 pack) $29.99 1836 DRUM SANDER 60-18036 Ready-To-Wrap Abrasives, 36 Grit (4 pack) $29.99 60-18060 Ready-To-Wrap Abrasives, 60 Grit (4 pack) $29.99 60-18080 Ready-To-Wrap Abrasives, 80 Grit (4 pack) $29.99 60-18100 Ready-To-Wrap Abrasives, 100 Grit (4 pack) $29.99 60-18120 Ready-To-Wrap Abrasives, 120 Grit (4 pack) $29.99 60-18150 Ready-To-Wrap Abrasives, 150 Grit (4 pack) $29.99 60-18180 Ready-To-Wrap Abrasives, 180 Grit (4 pack) $29.99 60-18220 Ready-To-Wrap Abrasives, 220 Grit (4 pack) $29.99 1632 PLUS DRUM SANDER 60-6036 Ready-To-Wrap Abrasives, 36 Grit (4 pack) $29.99 60-6060 Ready-To-Wrap Abrasives, 60 Grit (4 pack) $29.99 60-6080 Ready-To-Wrap Abrasives, 80 Grit (4 pack) $29.99 60-6100 Ready-To-Wrap Abrasives, 100 Grit (4 pack) $29.99 60-6120 Ready-To-Wrap Abrasives, 120 Grit (4 pack) $29.99 60-6150 Ready-To-Wrap Abrasives, 150 Grit (4 pack) $29.99 60-6180 Ready-To-Wrap Abrasives, 180 Grit (4 pack) $29.99 60-6220 Ready-To-Wrap Abrasives, 220 Grit (4 pack) $29.99 10-20 PLUS DRUM SANDER 60-1060 Ready-To-Wrap Abrasives, 60 Grit (4 pack) $29.99 60-1080 Ready-To-Wrap Abrasives, 80 Grit (4 pack) $29.99 60-1100 Ready-To-Wrap Abrasives, 100 Grit (4 pack) $29.99 60-1120 Ready-To-Wrap Abrasives, 120 Grit (4 pack) $29.99 60-1150 Ready-To-Wrap Abrasives, 150 Grit (4 pack) $29.99 60-1180 Ready-To-Wrap Abrasives, 180 Grit (4 pack) $29.99 60-1220 Ready-To-Wrap Abrasives, 220 Grit (4 pack) $29.99 READY TO CUT ABRASIVE STRIPS 60-9036 Ready-To-Cut Abrasive, 36 Grit $129.99 60-9060 Ready-To-Cut Abrasive, 60 Grit $129.99 60-9080 Ready-To-Cut Abrasive, 80 Grit $129.99 60-9100 Ready-To-Cut Abrasive, 100 Grit $129.99 60-9120 Ready-To-Cut Abrasive, 120 Grit $129.99 60-9150 Ready-To-Cut Abrasive, 150 Grit $129.99 60-9180 Ready-To-Cut Abrasive, 180 Grit $129.99 60-9220 Ready-To-Cut Abrasive, 220 Grit $129.99 JET JETTOOLS.COM 19

NEW 15", 18", 20" STEEL FRAME BANDSAWS Large resaw capacity for cutting large pieces of wood, slicing veneers, and cutting book matched panels. Precision ground cast iron table for added stability and work support. Fence system features a micro-adjustable, dual-position side plate. Tool-less, independently adjustable, upper and lower ball bearing guides. Rigid, four-sided guide post with rack and pinion adjustment for optimum blade support. Easy-to-read blade tension scale can be viewed through upper door window. Single knob adjustment simplifies the blade tracking process. Blade tracking window provides clear view of blade during tracking. Heavy duty tensioning with quick release features three settings: full tension, partial tension, and full release. Cast iron trunnion for maximum support and stability. Slotted table allows for front blade removal. Cast iron handwheels and ergonomically designed knobs make adjustments smooth and easy. $1,699.99 STOCK NO. 714600 714600 JWBS-15, 15" Bandsaw, 1-3/4HP, 115/230V $1,699.99 714650 JWBS-15-3, 15" Bandsaw, 3HP, 230V $1,849.99 714700 JWBS-18, 18" Bandsaw, 1-3/4HP, 115/230V $2,199.99 714750 JWBS-18-3, 18" Bandsaw, 3HP, 230V $2,399.99 714800 JWBS-20-3, 20" Bandsaw, 3HP, 230V $2,999.99 714850 JWBS-20-5, 20" Bandsaw, 5HP, 230V $3,299.99 *20" MODELS ONLY 708119 Heavy Duty Universal Mobile Base $149.99 20 JET WOODWORKING

14" BANDSAWS Cast iron work table. Cast iron frame construction for strength, rigidity, and reduced vibration. 4" dust port allows for direct connection of dust collection system. $1,079.99 STOCK NO. 710116K 708115K JWBS-14CS, 14" Bandsaw, 1HP 1PH 115/230V, Closed Stand $799.99 710116K JWBS-14DXPRO 14" Deluxe Bandsaw, 1.25HP 1PH 115/230V $1,079.99 JWBS-14CS 708716 Miter Gauge for 14" Bandsaws $49.99 707201 Bandsaw Blade, Scroll, 67-1/2 x 1/8 x 0.025 x 18TR $34.99 707202 Bandsaw Blade, Resaw, 67-1/2 x 1/2 x 0.032 x 4HK $34.99 707203 Bandsaw Blade, General Purpose, 67-1/2 x 1/2 x. 025 x 6HK $24.99 708114 3SP-14, 3 Speed Kit for JWBS-14 $129.99 707204 Bandsaw Blade, General Purpose, 67-1/2 x 1/4 x.025 x 6SK $24.99 714102 Woodworking Bandsaw Fence, Fits 14" x 14" Tables $79.99 714101 Woodworking Bandsaw Fence, Fits 15" x 15" Tables $89.99 708748 Miter Gauge for JWBS-16, -18, $49.99 708127 Blade Bearing Guides, Carter-Style for 14" Bandsaws $159.99 708916 Miter Gauge for 12" Bandsaw $69.99 JWBS-14DXPRO 708716 Miter Gauge for 14" Bandsaws $49.99 *710116K ONLY JET JETTOOLS.COM 21

10" BENCHTOP BANDSAW Compact benchtop design allows for easy transport to different shop locations. Rigid steel stand allows bandsaw to transition from the benchtop to the floor. Heavy-Duty 1/2 HP induction motor for various cutting applications. Poly-V drive system maximizes power transfer from motor to blade and reduces vibration. Upper and lower ball bearing blade guides provide blade stability. Quick release blade tension makes changing and re-tensioning the blade fast, easy, and consistent. Aluminum extruded fence ensures smooth sliding action and straight, precise cuts. 714000 JWB-10, 10" Open Stand Bandsaw $399.99 $399.99 STOCK NO. 714000 22 JET WOODWORKING

SHAPERS Multiple-speeds let you select the best speed and torque for different cutter diameters. Large, precision ground cast iron table provides a durable work surface. Extruded aluminum fence comes with T-Slots and 2 feather board hold-downs. Reversible spindle speeds for diverse shaping jobs. Starting pins for irregular shaping. Extra large chrome handwheel is conveniently located for fast, easy, and accurate spindle height adjustments. 4" Dust port built into fence for convenient hookup to any dust collection system. Spindle lock for safe and easy cutter set up. Spindle height scale. $2,249.99 STOCK NO. 708309 $2,949.99 STOCK NO. 708323 708309 JWS-25X, Shaper, 3HP 1PH 230V, 1/2" & 3/4" Spindles $2,249.99 708323 JWS-35X3-1, Shaper, 3HP 1PH 230V $2,949.99 708326 JWS-35X5-1, Shaper, 5HP 1PH 230V $3,099.99 AVAILABLE FOR ALL SHAPERS 708118 JMB-UMB Universal Mobile Base $89.99 JWS-25CS 709526 3/4" Spindle for JWS-25CS Shaper $49.99 JWS-25X 708382 30mm Spindle for JWS-25X Shaper $99.99 708388 1/2" Spindle Assembly for JWS-25X Shaper $99.99 708387 3/4" Spindle Assembly for JWS-25X Shaper $99.99 708318 1" Spindle for JWS-25X Shaper $99.99 708383 1/4" Collet Set for JWS-25X Shaper $69.99 708384 1/2" Collet Set for JWS-25X Shaper $69.99 JWS-35X 708372 30mm Spindle for JET 35X Shaper $99.99 708381 1/2" Spindle for JET 35X Shaper $99.99 708317 3/4" Spindle for JET 35X Shaper $99.99 708314 1" Spindle for JET JWS-35X Shaper $99.99 708328 708388 $99.99 709526 3/4" Spindle for JWS-25CS Shaper $49.99 JET JETTOOLS.COM 23

10" & 12" BENCHTOP COMPOUND MITER SAWS Innovative Green XACTA Laser provides high visibility for precision cutting. Heavy-Duty 15 amp motor with brake for various cutting applications. Up-front controls for safety and ease of use. $299.99 STOCK NO. 707100 H H H H ½ -POPULAR MECHANICS $599.99 STOCK NO. 707110 B3NCH TM 10" MITER SAW 707100 JMS-10CMS, 10" Compound Miter Saw, Green Laser $299.99 B3NCH TM 10" SLIDING DUAL BEVEL MITER SAW 707110 JMS-10SCMS, 10" Sliding Dual Bevel Miter Saw, Green Laser $599.99 B3NCH TM 12" SLIDING DUAL BEVEL MITER SAW 707120 JMS-12SCMS, 12" Sliding Dual Bevel Miter Saw, Green Laser $749.99 JMS-10SCMS 707111 JET Extension Wings for 10" Miter Saw $49.99 24 JET WOODWORKING

10" PROSHOP II TABLE SAWS WITH RIVING KNIFE Newly designed arbor lock to change blades quickly and easily. Quick release riving knife for hassle free riving knife changes. Improved dust shroud around blade for greater dust collection. Convenient, magnetic paddle switch for the safest operation possible. Innovative single belt design for easier belt tensioning and reduced vibration. Motor reset switch conveniently relocated. to the power switch, instead of the motor. Dado insert and low profile riving knife included. Redesigned guard for better protection and ease of use. On board storage for all included accessories. CSA certified. $1,449.99 STOCK NO. 725000K NEW 725004K JPS-10 10" Proshop 1.75HP 1PH 115V. 30" Fense System, Steel Wing w/ Riving Knife $1,249.99 725005K JPS-10 10" Proshop 1.75HP 1PH 115V. 52" Fence System, Steel Wing w/ Riving Knife $1,449.99 725000K JPS-10 10" ProShop 1.75 HP 1 PH 115V 30" Fence System, Cast Wing w/ Riving Knife $1,449.99 725001K JPS-10, 10" ProShop 1.75HP 1PH 115V, 52" Fence System, Cast Wing w/ Riving Knife $1,599.99 725006K JPS-10, 10" ProShop 1.75HP 1PH 230V, 30" Fence System, Steel Wing w/ Riving Knife $1,249.99 725007K JPS-10, 10" ProShop 1.75HP 1PH 230V, 52" Fence System, Steel Wing w/ Riving Knife $1,499.99 725002K JPS-10, 10" ProShop 1.75HP 1PH 230V, 30" Fence System, Cast Wing w/ Riving Knife $1,549.99 725003K JPS-10, 10" ProShop 1.75HP 1PH 230V, 52" Fence System, Cast Wing w/ Riving Knife $1,799.99 725004 ProsShop II Dado Insert $49.99 708119 JMB-UMB-HD Heavy-Duty Universal Mobile Base $149.99 708158 Mobile Base Extension Kit $89.99 10" & 12" DELUXE XACTA TABLE SAWS 30" or 50" Commercial XACTA Fence II with T-square design. Quick release riving knife greatly reduces binding/kickback risk. Push button arbor lock for rapid blade change. Shrouded blade increases dust collection efficiency. Standard 11" left and right cast iron extension wings provides the largest table surface in its class. Poly-V drive belt system delivers quiet, efficient operation. $2,449.99 STOCK NO. 708674PK 708674PK XACTA Saw Deluxe 3HP 1PH 230V, 30" Fence System $2,449.99 708675PK XACTA Saw Deluxe 3HP 1PH 230V, 50" Fence System $2,599.99 708676PK XACTA Saw Deluxe 5HP 1PH 230V, 30" Fence System $2,749.99 708677PK XACTA Saw Deluxe 5HP 1PH 230V, 50" Fence System $2,799.99 708678PK XACTA Saw Deluxe 3HP 1PH 230V, 50" Fence System, Downdraft Table $2,799.99 708679PK XACTA Saw Deluxe 5HP 1PH 230V, 50" Fence System, Downdraft Table $3,049.99 708546PK JTAS-12-DX, 12" Xacta Saw, 5HP 1PH $4,299.99 708097 Dado Insert for 10" Deluxe Xacta Saw $59.99 708682 Riving Knife, Thin Kerf, for Deluxe XACTA Saw $49.99 708683 Riving Knife, Low Profile, for Deluxe XACTA Saw $49.99 708684 Riving Knife, Low Profile Thin Kerf, for Deluxe XACTA Saw $39.99 JET JETTOOLS.COM 25

NEW ROUTER TABLE All components sold individually for maximum customizability. Cast Iron or MDF top available, giving options for durability and affordability. Precision Router Lift with above the table adjustments for ease of use. Versatile fence system with a variety of feather board and flip stop add-ons. Heavy duty stand with router bit storage and an integrated mobile base. Dust collection system that features an enclosed dust box around the router as well as dust collection in the fence at the point of cut. On-board tool storage for miter gauge and other accessories. Micro adjust fence options for maximum accuracy when routing. $1,199.99 STOCK NO. 737000WK 737000CK Router Lift with Cast Table Kit $1,449.99 737000WK Router Lift with MDF Table Kit $1,199.99 737000 JRL-912 Router Lift $449.99 737001 32" x 24" Fence Assembly $179.99 737002 32" x 24" Cast Iron Table $449.99 737003 32" x 24" MDF Table $159.99 737004 Floor Stand (with Switch and Miter Gauge) $249.99 737005 Dust Collection Box $119.99 737008 Flip Stop $24.99 737009 Fine Fence Adjusters (set of 2) $69.99 737010 Vertical Featherboards (2) $24.99 737006 Power Switch $34.99 737007 Phenolic Inserts (ZC,6.4,12.7,30,63.5mm) $74.99 737011 Horizontal Featherboards (2) $49.99 26 JET WOODWORKING

6" JOINTERS Powerful 1HP motor handles the toughest tasks. Two-way tilting fence with positive stops at 45 and 90 to handle bevel operations. Exclusive front-mounting table adjustment handwheels make quick, easy, and accurate corrections. Industrial push-button controls are conveniently placed for easy access. Built-in dust chute with 4" port connects to your collection system for efficient dust/chip disposal. Center fence controls are conveniently mounted to allow quick adjustments. Powerful 1HP motor easily handles the toughest jointing tasks. Heavy-duty, one-piece steel closed stand includes mounting tabs for increased stability. $1,379.99 STOCK NO. 708466DXK 708457DXK JJ-6CSDX, 6" Deluxe Jointer, 1HP 1PH 115/230V, Quick-Set Knives $1,149.99 708466DXK JJ-6HHDX, 6" Deluxe Jointer, 1HP 1PH 115/230V, Helical Head $1,599.99 718200K JWJ-8CS 8" Jointer, 2HP 1PH 230V $1,579.99 718250K JWJ-8HH 8" Jointer, 2HP 1PH 230V, Helical Head $2,099.99 JJ-6CSDX 708801 Knives for 6" Jointer (set of 3) $79.99 708802 Knives for 8" Jointer (set of 3) $79.99 JJ-6HHDX 1791212 Inserts for Helical Cutter Head (set of 10) $64.99 708815 JPB-36 Jointer Push Block $9.99 JET JETTOOLS.COM 27

8" JOINTERS Available with high speed steel knives or helical cutterhead for a superior finish. Extra-long, heavy-duty cast iron infeed and outfeed tables with precision machined finish. Large chrome handwheels and easy-to-reach locks make table adjustments less of a hassle. Tall, rigid fence provides added support. Two-way tilting fence with positive stops at 45 and 90 to handle bevel operations. Magnetic controls provide long life and reliability, protecting the motor from potential electrical supply issues. Built-in 4" dust chute connects to your collection system for efficient dust/chip disposal. Fence adjustment levers are conveniently located in the center of the fence for quick access. Powerful 2HP motor easily handles the toughest jointing. $2,099.99 STOCK NO. 718250K STOCK NO. DESCRIPTION SALE PRICE 718200K JWJ-8CS, 8" Closed Stand Jointer, 2HP, 1PH, 230V $1,579.99 718250K JWJ-8HH, 8" Helical Head Jointer, 2HP, 1PH, 230V $2,099.99 JWJ-8CS 708802 Knives for 8" Jointer (set of 3) $79.99 708118 JMB-UMB Universal Mobile Base $89.99 JWJ-8HH 1791212 Inserts for Helical Cutter Head (set of 10) $64.99 28 JET WOODWORKING

15" PLANERS Heavy-duty cast iron and steel construction for added strength and durability. Two-speed gear box with automatic chain tensioner lets you adjust the feed rate to meet your needs. Large, cast iron, precision ground table for precise workpiece support. Powerful 3 HP TEFC induction motor with three V-belt transmission for smooth and consistent power. Built-in casters for easy mobility. Large handwheel with positive gear drive allows for quick and accurately table adjustments. Heavy-duty table locks keep the table secure during use. Angled 4" dust port keeps your dust hose out of the way. Heavy-duty steel closed stand with lockable casters for increased portability. Magnetic controls provide long life and reliability. $2,899.99 STOCK NO. 708543 708538 JWP-15DX: 15 CS Planer with Quick Change Knives $2,099.99 708543 JWP-15HH, 15" Planer, Helical Head $2,899.99 708531 JWP-16OS: 16" 3HP OS Planer $1,599.99 JWP-15DX 708535 JWP-13K, Knife Set for JWP-13DX $69.99 708807 JWP15HI-K, 15" Planer Knife Set (3) $149.99 708817 Quick Change Knife Set for JET 15" Planers $139.99 708814 JWP-16K, Knife Set for JET 16" Planer $149.99 708813 JWP-12K, Knife Set for 12-1/2" Portable Planer $59.99 708520 Digital Readout for 15" & 20" Planers $159.99 JWP-15HH 708810 JWP20H-K, Knives for JWP-20HH Planers (set of 3) $259.99 708520 Digital Readout for 15" & 20" Planers $159.99 708535 JWP-13K, Knife Set for JWP-13DX $69.99 JET JETTOOLS.COM 29

16" PLANER Cutter head with three high-speed steel knives locks firmly in place to prevent movement while in use. Heavy-duty cast iron and steel construction for added strength and durability. Two-speed gear box with automatic chain tensioner lets you adjust the feed rate to meet your needs. Large, cast iron, precision ground table for precise workpiece support. Powerful 3 HP TEFC induction motor with three V-belt transmission for smooth and consistent power. Surge infeed and outfeed rollers give your workpiece maximum support during planing operations. Large handwheel with positive gear drive allows for quick and accurate table adjustments. Angled 4" dust port keeps your dust hose out of the way. Heavy-duty steel wide base open stand with casting pads provides support and stability of the tool during use. Magnetic controls provide long life and reliability. $1,599.99 STOCK NO. 708531 708531 JWP-16OS, 16" Planer, 3HP 1PH 230V, Open Stand $1,599.99 708814 Knives for 16" Planer (set of 3) $149.99 708119 JMB-UMB-HD Heavy-Duty Mobile Base $149.99 30 JET WOODWORKING

20" PLANERS Helical cutterhead with indexable carbide inserts for a superior finish and quieter cut. Heavy-duty cast iron and steel construction for added strength and durability. Two-speed gear box with automatic chain tensioner lets you adjust the feed rate to meet your needs. Large cast iron precision ground table for precise workpiece support. Positive gear drive moves table quickly and accurately. Cast iron infeed and outfeed tables come with the machine. Large handwheel with positive gear drive allows for quick and accurate table adjustments. 1/16" increment height scale lets you make the most precise adjustments for fine cuts. 5" dust port provides efficient chip and dust collection. One-piece welded steel base offers solid support and stability. Magnetic controls provide long life and reliability. $3,599.99 STOCK NO. 708544 708528 JWP-208-1, 20" Planer, 3HP 1PH 230V $2,499.99 708544 JWP-208HH, 20" Planer, 5HP 1PH 230V, Helical Head $3,599.99 JWP-208-1 708808 Knives for JWP-208 Planers (set of 3) $249.99 708520 Digital Readout for 15" & 20" Planers $159.99 708119 JMB-UMB-HD Heavy-Duty Mobile Base $149.99 JWP-208HH 1791212 Inserts for Helical Cutter Head (set of 10) $64.99 708520 Digital Readout for 15" & 20" Planers $159.99 708119 JMB-UMB-HD Heavy-Duty Mobile Base $149.99 JET JETTOOLS.COM 31

8" AND 10" BENCHTOP PLANER/JOINTER Combination benchtop jointer & planer provides a 2 in 1 machine to maximize workspace. Compact bench top design fits conveniently in small shop environments. 13 amp motor for various cutting applications. Two high speed steel knives for precise, smooth cuts. Oversized, ergonomic knobs provide ease of use and maximum control. Large aluminum extruded fence. Outfeed table with height adjustment supports long workpieces and helps reduce snipe. $679.99 STOCK NO. 707410 $469.99 STOCK NO. 707400 707400 JJP-8BT, 8" Jointer / Planer Combo $469.99 707410 JJP-10BTOS, 10" Jointer / Planer Combo w/ Stand $679.99 JJP-8BT 707401 Knives for 8" Jointer/Planer (set of 2) $39.99 707411 Knives for 10" Jointer/Planer (set of 2) $39.99 JJP-10BTOS 707402 Stand for 8" Jointer/Planer $59.99 708821 Knives for JJP-12 (set of 3) $59.99 32 JET WOODWORKING

12" PLANER/JOINTER COMBINATION MACHINE Three high-speed steel knife cutterhead, or helical head option, provide rapid cutting and superior finishes. Parallelogram design keeps the table close to the cutterhead for improved finish and allows for precise depth of cut adjustments. Extra large aluminum extruded fence with centered controls for quick adjustments. Extremely quick changeover between jointing and planing functions (fence does not need to be removed). Powerful 3HP induction motor easily handles the toughest jointing and planing tasks. Built-in dust chute with 4" dust port used for both jointing and planing operations. Heavy-duty, one-piece steel closed stand includes mounting tabs for increased stability. Large handwheel for quick and precise adjustments of planer table. Heavy-duty cast iron tables with a machined finish to ensure accuracy and flatness. $4,199.99 STOCK NO. 708476 708475 JJP-12, 12" Planer/Jointer, 3HP 1PH 230V $2,799.99 708476 JJP-12HH, 12" Planer/Jointer, 3HP 1PH 230V, Helical Head $4,199.99 JJP-12 708821 Knives for JJP-12 (set of 3) $59.99 JJP-12HH 1791212 Inserts for Helical Cutter Head (set of 10) $64.99 JET JETTOOLS.COM 33

13" PLANER/MOLDER Cast iron table and base provide strength and reduce vibration during use. Four precision-ground column design feature adds stability when raising and lowering the table. Three-knife cutterhead design produces a superior finish in either application. Two speed gear box has feed rates set for optimum planing and molding results. Molding cutterhead accommodates over 40 standard molding cutter sets; most 2" or smaller heads can be installed without removing the planing knives to save you set-up time. Infeed and outfeed rollers are adjustable and rubber-coated to support your workpiece without marring the wood. $1,249.99 STOCK NO. 708524 708524 JPM-13CS, 13" Planer/Molder, 1.5HP 1PH 115/230V $1,249.99 708366 Knife Set for JPM-13 Planer/Molders (set of 3) $99.99 PARALLEL CLAMPS Patented design provides precision and power with exact 90 clamping at up to 1,000 lbs. pressure. Precision-Rule measurement system provides a consistent setup and quick identification of opening capacity. Slide-Glide trigger makes precise adjustments rapidly and easily. Ergonomic SUMOGRIP handle integrated. with soft grip for added comfort and increased torque. $49.99 STOCK NO. 70412 70401 Parallel Framing Block Kit (Set of 4) $29.99 70411 Parallel Clamp Framing Kit $289.99 70412 12" Parallel Clamp $49.99 70424 24" Parallel Clamp $59.99 70431 31" Parallel Clamp $64.99 70440 40" Parallel Clamp $69.99 70450 50" Parallel Clamp $74.99 70460 60" Parallel Clamp $84.99 70482 82" Parallel Clamp $99.99 70498 98" Parallel Clamp $109.99 70402 Parallel Clamp Bench Dog (4 Pack) $15.99 70407 Parallel Clamp Moveable Foot (Set Of 4) $15.99 70401 34 JET WOODWORKING

JET MOBILE BASES FIND THE MOBILE BASE SETUP THAT IS RIGHT FOR YOUR PRODUCT $89.99 STOCK NO. 708118 $149.99 STOCK NO. 708119 $89.99 STOCK NO. 708158 MOBILE BASES STOCK NO. DESCRIPTION 708118 714500 JWBS-14SF 14" Steel Frame Bandsaw, 1-3/4HP 714550 JWBS-14SF-3 14" Steel Frame Bandsaw, 3HP 708749B JWBS-16B, 16" Bandsaw, 1.5HP 1PH 115/230V 708113A 708115K JWBS-14OS, 14" Bandsaw, 3/4HP 1PH 115/230V, Open Stand JWBS-14CS, 14" Bandsaw, 1HP 1PH 115/230V, Closed Stand 710116K JWBS-14DXPRO 14" Deluxe Bandsaw, 1.25HP 1PH 115/230V 708320 JWS-22CS, Shaper, 1-1/2HP 1PH 115/230V, 1/2" & 3/4" Spindles 708309 JWS-25X, Shaper, 3HP 1PH 230V, 1/2" & 3/4" Spindles 708323 JWS-35X3-1, Shaper, 3HP 1PH 230V 708326 JWS-35X5-1, Shaper, 5HP 1PH 230V 708447 OES-80CS, Oscillating Edge Sander, 1.5HP 1PH 115/230V 708457DXK 708466DXK 708458K 708468K JJ-6CSDX, 6" Deluxe Jointer, 1HP 1PH 115/230V, Quick-Set Knives JJ-6HHDX, 6" Deluxe Jointer, 1HP 1PH 115/230V, Helical Head JJ-8CS, 8" Jointer, 2HP 1PH 230V JJ-8HH, 8" Jointer, 2HP 1PH 230V, Helical Head 708119 710750B JWBS-18QT, 18" Bandsaw, 1.75HP 1PH 115/230V, Quick Tension 708118 & 708158 708119 & 708158 710751B 708754B 708755B 708492K 708494K 708674PK 708676PK JWBS-18QT-3, 18" Bandsaw, 3HP 1PH 230V, Quick Tension JWBS-20QT-3, 20" Bandsaw, 3HP 1PH 230V, Quick Tension JWBS-20QT-5, 20" Bandsaw, 5HP 1PH 230V, Quick Tension JPS-10, 10" ProShop 1.75HP 1PH 115/230V, 30" Fence System, Steel Wing w/riving Knife JPS-10, 10" ProShop 1.75HP 1PH 115/230V, 30" Fence System, Cast Wing w/riving Knife XACTA Saw Deluxe 3HP 1PH 230V, 30" Fence System XACTA Saw Deluxe 5HP 1PH 230V, 30" Fence System 708531 JWP-16OS, 16" Planer, 3HP 1PH 230V, Open Stand 708528 JWP-208-1, 20" Planer, 3HP 1PH 230V 708544 JWP-208HH, 20" Planer, 5HP 1PH 230V, Helical Head 708675PK 708677PK 708678PK 708679PK 708493K 708495K XACTA Saw Deluxe 3HP 1PH 230V, 50" Fence System XACTA Saw Deluxe 5HP 1PH 230V, 50" Fence System XACTA Saw Deluxe 3HP 1PH 230V, 50" Fence System, Downdraft Table XACTA Saw Deluxe 5HP 1PH 230V, 50" Fence System, Downdraft Table JPS-10, 10" ProShop 1.75HP 1PH 115/230V, 52" Fence System, Steel Wing w/riving Knife JPS-10, 10" ProShop 1.75HP 1PH 115/230V, 52" Fence System, Cast Wing w/riving Knife JET ROLLER STAND USE THIS VERSATILE ROLLER STAND TO SUPPORT STOCK AS YOU WORK ON PROJECTS THROUGHOUT THE SHOP. $44.99 STOCK NO. 709209 JET JETTOOLS.COM 35

WOODWORKING 2018 SAVINGS JULY 1 - DECEMBER 31, 2018 FOR MORE INFORMATION VISIT JETTOOLS.COM VISIT JETTOOLS.COM FOR MORE INFORMATION PRICES EFFECTIVE JANUARY 1ST - JUNE 30TH, 2018 OFFER AVAILABLE AT PARTICIPATING DEALERS ONLY WHILE SUPPLIES LAST. JET reserves the right to correct any pricing, product specifications or image discrepancies. 2018 JET All Rights Reserved. Printed in the U.S.A. The color WHITE is a registered trademark of JET Tools. STAND BEHIND YOUR WORK