DESCRIPTION The CUP Series has become a standard in the European relay market due to its versatile switch and schematic options. The staggered pin layout gives more space and allows for higher isolation from pin to pin on the PC board when compared to.0" x 0." relays. Designers have a choice between three switch technologies, the ruthenium sputtered DYAD, the all position mercury wetted MYAD, and the vertically mounting high performance MH contact. There is a choice between plastic and metal covers, as well as non-encapsulated types for lower capacitance. The CUPV models offer high input to output isolation and are BS EN 00 approved. FEATURES Standard nominal coil voltages include, and volts Available with plastic and metal can housings Designed to meet the most stringent telecommunications specifications on a worldwide basis Ideal for optional high isolation between input and output (up to 000Vrms) FCC compatible with switch options or - meets FCC Part APPLICATIONS Telecom Process control General purpose electronics Industrial Security APPROVALS Consult factory for PTB approved types UL Recognized EN00 certified CUPV types RATINGS (@ C) Parameter Min Typ Max Units Switching Voltage Switch option 00 Volts Switch option 000 Volts Switch option 00 Volts Switching Current Switch option 0. Amps Switch option or Amps Carry Current Switch option Amps Switch option or Amps Switching Frequency Switch option 00 Hz Switch option 00 Hz Switch option 00 Hz Contact Resistance Switch option 00 mω Switch option 0 mω Switch option 00 mω CUPV Switch option 00 mω CUPV Switch option 00 mω (See detailed specifications for more information.) www.remtechcorp.com
All parameters are at C unless otherwise stated. SPECIFICATIONS CUP C, E, P, S Switch Type Switch Type Switch Type All Position Wetted Contacts Wetted Contacts Dry Reed MYAD MH DYAD PARAMETER CONDITIONS SYMBOL MIN TYP MAX MIN TYP MAX MIN TYP MAX UNITS Contact Ratings Switching Voltage Max DC/PeakAC Resistive VL - - 00 - - 000 - - 00 Volts Switching Current Max DC/PeakAC Resistive IL - - - - - - 0. Amps Carry Current Max DC/PeakAC Resistive IC - - - - - - Amps Contact Rating Max DC/PeakAC Resistive - - - 0 - - 0 - - 0 Watts Life Expectancy Signal Level.0 V 0mA - - 00 - - 000 - - 00 - x0 Ops Rated Loads () x0 Ops Static Contact Resistance 0mV, 0mA CR - - 00 - - 0 - - 00 mω Contact Material - - Hg - - Hg - - Ru - - Hg Content - - - - 0 - - N/A - mgrams Relay Specifications Insulation Resistance Across Open Contacts IR 0 - - 0 - - 0 0 - - Ω Contact to Coil - 0 0 - - 0 0 - - 0 0 - - Ω Capacitance Across Open Contacts - -. -. -. pf Open Contact to Coil - -.. -. -. pf Closed Contact to Coil - -. - -. pf Dielectric Strength Across Open Contacts - 00 - - 000 - - 0 - - VDC/Peak AC Contacts to Coil I/O 00 - - 00 - - 00 - - VDC/Peak AC Operate Time, no bounce At Nominal Coil Voltage T P -.. - - - 0. () ms (bounce included-cup) 0Hz Square Wave Release Time Zener-Diode Suppression TREL -.. -.. - 0.. ms Environmental Ratings Storage Temperature TA -0-0 -0-0 -0-0 C Operating Temperature TO - - - - -0 - C Soldering Temperature Applied to pins, sec. max. - - - 0 - - 0 - - 0 C Vibration Resistance 0 Hz - 00 Hz G - - 0 - - 0 - - - Gs (Survival) Hz - 000 Hz (Sw type ) - - - - - - - - - 0 Gs Shock Resistance (Survival) ±ms, / Sine Wave S - - 0 - - 0 - - 0 Gs Weight (A) - -. - -. - -. - grams Weight (AB/A) - -. - -. - -. - grams () Consult factory for life requirements (). msec. maximum for & form A relays,. msec. maximum for form A, form B and AB relays USA --REMTECH Europe --00 Japan ---0 Ext. HongKong/China/Korea -0- Taiwan --- Singapore/Far East --
SPECIFICATIONS CUP SERIES All parameters are at C unless otherwise stated. PARAMETER CONDITIONS SYMBOL MIN TYP MAX MIN TYP MAX UNIT Contact Ratings Switching Voltage Max DC/PeakAC Resistive VL - - 00 - - 00 Volts Switching Current Max DC/PeakAC Resistive IL - - 0. - - Amps Carry Current Max DC/PeakAC Resistive IC - - - - Amps Contact Rating Max DC/PeakAC Resistive - - - 0 - - 0 Watts Life Expectancy Signal Level.0 V 0mA - 00 00-00 00 - x0 Ops Rated Loads () - - - - - - - x0 Ops Static Contact Resistance 0mV, 0mA CR - - 00 - - 00 mω Contact Material - - Ru - - Hg - - Hg Content - - N/A - - - mgrams Relay Specifications Insulation Resistance Across Open Contact IR 0 0 - - 0 - - Ω Contact to Coil - 0 0 - - 0 0 - - Ω Capacitance Across Open Contacts - -.. -. pf Open Contact to Coil - -. -.. pf - -. -. pf Dielectric Strength Between Contacts - 0 - - 00 - - VDC/PeakAC Contacts to Coil I/O 00 - - 00 - - VDC/PeakAC Operate Time, no bounce At Nominal Coil Voltage TOP - 0. -.. ms (bounce included-dry Reed) 0Hz Square Wave Release Time Zener-Diode Suppression TREL - 0. -.. ms Environmental Ratings CUP V CUP V Switch Type Switch Type High Performance DYAD MYAD Storage Temperature TA -0-0 -0-0 C Operating Temperature TO -0 - - - C Soldering Temperature Applied to pins, sec. max. - - - 0 - - 0 C Vibration Resistance 0Hz - 00Hz G - - - - - 0 Gs (Survival) Hz - 000Hz (Sw type ) - - - 0 - - - Gs Shock Resistance ±ms, / Sine Wave S - - 0 - - 0 Gs (Survival) Weight (A) - - - -. - grams Weight (AB/A) - -. - -. - grams () Consult factory for life requirements www.remtechcorp.com
COIL SPECIFICATIONS Coil Voltage Coil Resistance Operate Voltage Release Voltage Units Volts Ω Volts Volts Conditions /- 0%, C Must operate by C Must release by C Part # Min Typ Max Min Typ Max Min Typ Max Min Typ Max CUP E 00A0 () 0. 0. CUP E 00A 0. 0. CUP E 00A.. CUP E 00A0 (,) 0. 0. CUP E 00A 00. 0. CUP E 00A 0 00 0..0 CUP E 00A0 () 0. 0. CUP E 00A 0.. CUP E 00A 0 00 0.. CUP E 00A0 (,) 0. 0. CUP E 00A 0.. CUP E 00A 00.. CUP E 00A0 0. 0. CUP E 00A 00 000 00. CUP E 00A 00 00 0. CUP E 00A0 () 0. 0. CUP E 00A 0 00 0. CUP E 00A 0 00 0. CUP V 000 (). 0. CUP V 000 00 000 00. 0. CUP V 00 0. 0. CUP V 00 0. 0. CUP V 00 0 00 0. 0. CUP V 00 0 00 0..0 CUP V 00. 0. CUP V 00 0. 0. CUP V 000 0. 0. CUP V 000 0 00 000 00. CUP V 000 00 00 0. CUP V 000 0 0. CUP V 00. 0. 0. CUP V 00 0 00 0 CUP V 00 0 0 CUP V 00 0 00 000 00 CUP V 00 0 0. 0. CUP V 00 0 00 0. CUP V 00 0 00 0. CUP V 00 0 00 0. () Other packages available: C = metal cover; E = plastic cover, fully sealed; P = metal cover, fully sealed; S = open version () Other contact forms available: A, A, A, A, A, B, B, AB, AB, L (Latch) () Also available in metal cover () Other contact forms available: A, A, A, A, B () Other contact forms available: A, A, A, A, A, B () All CUPV models BS certified (000 VRMS) USA --REMTECH Europe --00 Japan ---0 Ext. HongKong/China/Korea -0- Taiwan --- Singapore/Far East --
PERFORMANCE GRAPHS CUP SERIES % Cumm. Fail. 0.0 0.0 0.0 0.0.0.0.0.0 0. 0. 0. 0. 0. CUP Switch Type Rated Load: 0VA 00V-00mA Load 0. x 0 ops 0% Survival. x 0 ops MTBF 0V-00mA Load.0 x 0 ops 0% Survival. x 0 ops MTBF 0V-00mA Load 0. x 0 ops 0% Survival 0. x 0 ops MTBF 0 - - - - - - -.0 0.0 00.0 % Cumm. Fail. 0.0 0.0 0.0 0.0.0.0.0.0 0. 0. 0. 0. 0. CUP Switch Type Rated Load: 0VA-0Hz 0V-A Load. x 0 ops 0% Survival.0 x 0 ops MTBF 0 - - - - - - -.0 0.0 00.0 % Cumm. Fail. 0.0 0.0 0.0 0.0.0.0.0.0 0. 0. 0. 0. 0. CUP Switch Type Rated Load: 0VA-0Hz 0V-A Load. x 0 ops 0% Survival.0 x 0 ops MTBF 00V-00mA Load.0x0 ops 0%Survival. x 0 ops MTBF 0 - - - - - - -.0 0.0 00.0 Number of Operations (x0 ) Number of Operations (x0 ) Number of Operations (x0 ) ORDERING INFORMATION A complete part number is represented by the digits below. CUP C, E, P CUP X XXXX X XX Series Package C = Metal cover, no encapsulation E = Plastic cover fully sealed P = Metal cover fully sealed Nominal Voltage 0 = V = V = V = V Switch Type = DYAD : dry reed Contact Form 00A = -Form-A 00A = -Form-A 00A = -Form-A 00A = -Form-A 00A = -Form-A 00B = -Form-B 00B = -Form-B AB = -Form-A,-Form B AB = -Form-A,-Form-B 00L = -Form-A latching Series Model Switch Type = DYAD : Dry reed Consult factory for additional drawings & various contact forms. CUP V SERIES CUP V X 0 X 0 X Nominal Voltage 0 = V = V = V = V Contact Form 0 = -Form-A = -Form-A = -Form-B = -Form-A, -Form-B = -Form-A www.remtechcorp.com
MECHANICAL DIMENSIONS DIMENSIONS mm (inches) CUP C/CUP P A CUP C/CUP P A (.00) 0. DIA.. 0. (0.00 0.00). 0. (.00 0.00) CUP C/CUP P A/B/A(Latch) CUP C/CUP P A CUP C/CUP P B CUP C/CUP P A(Latch) (.00). 0. (0.00 0.00). 0. (.00 0.00).00 MAX. (0.) 0.00 MAX. (0.) 0..0 (0.). (0.00). (0.00) CUP C/CUP P AB/B/A CUP C/CUP P A CUP C/CUP P B CUP C/CUP P AB (.00). 0. (0.00 0.00). 0. (.00 0.00).0 MAX. (0.) 0.0 MAX. (0.0) 0..0 (0.) 0. 0. (0.00 0.00).0 0. (0.00 0.00) 0 CUP P A/AB (.00). 0. (0.00 0.00). 0. (.00 0.00) CUP E A CUP P AB.0 MAX. (0.) 0.00 MAX. (0.) 0..0 (0.) 0. 0. (0.00 0.00).0 0. (0.00 0.00) 0 0 0. 0. (0.00 0.00) USA --REMTECH Europe --00 Japan ---0 Ext. HongKong/China/Korea -0- Taiwan --- Singapore/Far East --
MECHANICAL DIMENSIONS DIMENSIONS mm (inches) CUP E/CUP V A CUP E A CUP V A (.00). 0. (0.00 0.00). 0. (.00 0.00) MAX. (0.) 0.0 MAX. (0.0) 0..0 (0.).0 0. (0.00 0.00) CUP E A CUP E B CUP E A(Latch) CUP E/CUP V A/B/A(Latch) (.00) 0. 0. (0.00 0.00). 0. (.00 0.00).0 MAX. (0) 0.0 MAX. (0.0) 0. DIA..0 0. (0. 0.00 ). 0. (0.00 0.00). 0. (0.00 0.00) CUP V A CUP V B CUP E/CUP V B/A/AB CUP E A CUP E B CUP E AB CUP V AB (.00). 0. (0.00 0.00). 0. (.00 0.00).0 MAX. (0.0) 0.0 MAX. (0.0) 0..0 (0.) 0. 0. (0.00 0.00).0 0. (0.00 0.00) 0 0 www.remtechcorp.com
MECHANICAL DIMENSIONS DIMENSIONS mm (inches) CUP E A CUP E A (.00). 0. (0.00 0.00). 0. (.00 0.00).0 MAX. (0.00) 0.0 MAX. (0.0) 0..0 (0.). 0. (0.00 0.00). 0. (0.00 0.00) 0 0.0 0. (0 0.00) CUP E/CUP V A/AB CUP E A CUP E AB CUP V AB (.00). 0. (0.00 0.00). 0. (.00 0.00) 0.0 MAX. (0.0) 0.0 MAX. (0.0) 0..0 (0.) 0. 0. (0.00 0.00).0 0. (0.00 0.00) 0 0 0 0. 0. TYP. (0.00 0.00) USA --REMTECH Europe --00 Japan ---0 Ext. HongKong/China/Korea -0- Taiwan --- Singapore/Far East --