multi-level workstations

Similar documents
desk accessories DESK ACCESSORY BASICS PLANNING WITH MODESTY PANELS MULTI-FUNCTIONAL DRAWER APPLICATIONS

desks DESK BASICS GABLES & EQUIVALENT SUPPORTS MODESTY PANEL BASICS RECTANGULAR WORKSURFACE APPLICATIONS DESK FINISHES...

spine desks UNDERSTANDING SPINE DESKS SPINE DESK BASICS MODESTY PANEL & GABLE BASICS PLANNING WITH SPINE DESKS...

reception P RO D U C T M A P / TA B L E C O N T E N T S S T R A I G H T R E C E P T I O N D E S K M O D U L E B A S I C S...

spine desks PRODUCT MAP / TABLE OF CONTENTS SPINE DESK BASICS MODESTY PANEL & GABLE BASICS SPINE DESK FINISHES...

application guide S TA N D A R D H E I G H T W O R K S TAT I O N O V E RV I E W M U LT I - L E V E L W O R K S TAT I O N O V E RV I E W...

preconfigured desks PRODUCT MAP/TABLE OF CONTENTS STANDARD PRECONFIGURED DESK BASICS EXECUTIVE PRECONFIGURED DESK BASICS...

mounted storage & accessories

mounted storage & accessories

screens UNDERSTANDING SCREENS PANEL WALL ADD-ON SCREEN BASICS PLANNING WITH WALL PANEL ADD-ON SCREENS... 94

worksurfaces & countertops

freestanding storage & accessories

returns & credenzas RETURN BASICS CREDENZA BASICS RETURN & CREDENZA FILING DRAWER CAPACITIES RETURN APPLICATIONS...

application guide WORKSURFACE SUPPORTS WORKSURFACE SUPPORT BASICS PLANNING WITH WORKSURFACE BRACKETS... 43

expansion desking price guide annex

height-adjustable bench price & application guide

worksurfaces & countertops

columns & screens C O L U M N - M O U N T E D U N F R A M E D & O R I G I N A L F R A M E D E L E M E N T B A S I C S...9 6

credenzas PRODUCT MAP / TABLE OF CONTENTS CREDENZA BASICS FILING DRAWER CAPACITIES CREDENZA FINISHES

accessories PRODUCT MAP / TABLE OF CONTENTS UNDERSTANDING ACCESSORIES STORAGE MOUNTED FASCIA BASICS

freestanding modules P RO D U C T M A P F R E E S TA N D I N G M O D U L E S O V E RV I E W

desks & desk accessories

worksurfaces & countertops

moderate price and veneer selections

desk accessories DESK ACCESSORY BASICS PLANNING WITH MODESTY PANELS... 90

mounted storage & accessories

freestanding storage & accessories

modular desks F I X E D - H E I G H T D E S K B A S I C S SEMI- SUPPORTED L- SHAPED DESK & RECTANGUL AR WORKSURFACE BASICS...

panels PANEL OVERVIEW ERGONOMIC HEIGHTS PANEL GASKET OVERVIEW PANEL SEGMENTATION PANEL FRAME STYLE SUMMARY OF BENEFITS...

panels PA N E L S O V E RV I E W M O D U L A R PA N E L B A S I C S S U P E R PA N E L B A S I C S...3 9

Opus Cabinets with "H Storage Unit, continued

screens UNDERSTANDING SCREENS DESK EDGE SCREEN BASICS PLANNING WITH DESK EDGE SCREENS LATERAL SCREEN BASICS...

10 - Hyperwork CONTEMPORARY LAMINATE

HYPERWORK SIN HYPERWORK

work tables WORK TABLE BASICS FINISH PROTOCOL EDGE TRIM STYLE OVERVIEW USER EDGE & GRAIN DIRECTION WOOD FINISH DETAILS...

FLUENT Technical Specifications

training P RO D U C T M A P T R A I N I N G W O R K S U R FA C E & S U P P O RT B A S I C S T R A I N I N G TA B L E B A S I C S...

Teknion dna overview. soft seating

DESKS REQUEST FREE QUOTE FREE LAYOUT SERVICES. Office Furniture Connection offers a fully customizable performance grade line of laminate furniture.

fascias U N D E R S TA N D I N G FA S C I A S U N D E R S TA N D I N G FA S C I A S F O R F R E E S TA N D I N G D I S T R I C T...

O X M O O R V E N E E R C O L L E C T I O N O X M O O R

Surpass. Desking System. Expand Your Reach.

Product must be installed as shown using the screws and brackets provided. Use of incorrect hardware could result in damage to the product.

OFFICE FURNITURE Executive Furniture

accessories U N D E R S TA N D I N G A C C E S S O R I E S D R AW E R M O D U L E S & T R AY M O D U L E B A S I C S...

specifying is simple and quick. However, if you do need assistance it is just a phone call away.

meeting & audience boardroom tables

Worksurfaces & Supports

meeting & audience boardroom tables

RENDEZVOUS CONFERENCE

Contents. Fulcrum CE Executive Workstation Light Oak and gloss white lacquer workstation and storage

MultiStations OS. Three H Furniture Systems Limited Clover Valley Rd. New Liskeard, ON Canada P0J 1P0 T F

BELMONT SERIES. Executive Cherry Finish

Worksurface to Tower Bracket

KESWICK DESIGN CHANGES EVERYTHING GSA * English Cherry Finish

a.k.a. casegoods instructions

shelf basics application guide shelves W/R/S offers different shelf types to help define a space s purpose and provide storage capacity.

KESWICK DESIGN CHANGES EVERYTHING. English Cherry Finish

AXIS. Bench Desking System

IMPULSE G2/PULSE STATIC BRIDGE & RETURN MODULE. Drill. Desk Connecting. Outside by fastening the supplied wood screws from the HK-67 kit through the

CANOPY HEIGHT ADJUST. Table of Contents. Benching. Canopy Kimball Benching. Price List Effective Dates: Pricing Revisions

wood that works Skeena

Worksurfaces & Supports

IMPULSE G2/PULSE STATIC BRIDGE & RETURN MODULE. Drill. Desk Connecting. Outside by fastening the supplied wood screws from the HK-67 kit through the

freestanding storage & accessories L AT E R A L F I L E D R AW E R T Y P E S

OXYGEN INSTALLATION. Revision date

meeting & audience boardroom tables

Definition Assembly Instructions

desk basics application guides Dossier Desks are full wood construction and provide a traditional aesthetic.

Kindle One. Comprehensive Casegoods

1224 MILL STREET PO BOX 270 JASPER, INDIANA TEL TOLL FAX

IM#: Storage Solutions

INSTALLATION MANUAL VERITY. friant.com/verity

English Cherry Finish

Linear Hook- on Worksurfaces

STAKS. Crossover Casegoods ASSEMBLY INSTRUCTIONS

MAST Overview. ergonomics & accessories. MAST Dynamic Arm / Dynamic Arm Light

GE Monogram. Installation. Instructions. Microwave Oven. Under Cabinet Installation. and. JX827 Series Built-In Kit. Models.

Express Laminate. EL Classic PLUS. EL Classic. EL Classic PLUS

1448 NELSON ROAD LONGMONT, CO jesper 100. office furniture

LICENCE LAMINATE CASEGOODS 4 OPEN OFFICE 6 BOARDROOM 8 SINGLE OFFICE 10 MANAGER OFFICE 12 TEAMING OFFICE 14 EXECUTIVE OFFICE

Work faster. Work better. Work smarter. Your environment. demands more from you and. you demand more from your. environment.

ADDENDUM NO 2 LU CASES - Furniture Tender

VWR LABORATORY BENCHES

APTOS DUOFOIL LEGS DRILL 1/8" DRILL BIT. Rev: Dwg: DUOFOIL LEGS DRILL DUOFOIL LEGS AT A 45 ANGLE TO EDGE OF TOP WITH WIRE CAVITY

application guide WALL CABINETS WALL CABINET BASICS WALL CABINET COMPONENTS LOCK CHART DIVISION CHART... 21

Answer Freestanding Specification Guide

FlexFrame - Storage Components and Skins

Walden. Statement of Line 212 Walden Planning Thought Starters and Applications 220

INNOVATIVE COMMERCIAL CABINET & WORK SURFACE MANUFACTURE. P r o d u c t C a t a l o g. i n n o v a t i v e l a m i n a t e wo r k

Moveable Workstations. Enterprise KEWAUNEE. encouraging new discovery...worldwide

Right. Side Tower-Overhead Combination Revised 11/12/05 ON SITE A,B D,E C

freestanding systems ie

architectural products

Disassembly Instructions for Recycling June 10, 2010

Footprint Worksurface Assembly Instructions

Companion Products. Companion Products. Artistic Hutch. Artistic Hutch. Artistic Hutch. This is the Perfect Hutch to Compliment a Caretta Office

Sustainable Manufacturing

Construction Constructed of wood and wood veneers, featuring solid wood bases.

VWR LABORATORY BENCHES. Ergonomic, Flexible Lab System for Today s Modern Laboratories

Transcription:

multi-level workstations FIXED-HEIGHT APPLICATIONS: 73 UNDERSTANDING MULTI-LEVEL WORKSTATIONS........... 76 HIGH SECONDARY DESK BASICS......................... 80 RUN-OFF & HIGH SECONDARY DESK BASICS................. 81 73 73 OVERLAPPING BRIDGE & HIGH SECONDARY DESK BASICS....... 82 73 LOW SECONDARY DESK BASICS.......................... 83 RUN-OFF & LOW SECONDARY DESK BASICS................. 84 OVERLAPPING BRIDGE & LOW SECONDARY DESK BASICS........ 85 73 73 TABLE/FREESTANDING DESK BASICS.................... 86 73 PRIMARY DESK FOR U-SHAPE CONFIGURATION BASICS....... 88 RUN-OFF WORKSURFACE SUPPORT APPLICATIONS.......... 89 MULTI-LEVEL WORKSTATION APPLICATIONS................ 90 73 73 MULTI-LEVEL WORKSTATION FINISHES.................. 91 73 73 73 73 73

multi-level workstations (continued) HEIGHT-ADJUSTABLE APPLICATIONS: 75 UNDERSTANDING MULTI-LEVEL WORKSTATIONS........... 93 FREESTANDING DESK & RUN-OFF COMPONENTS..............96 FREESTANDING DESK & RUN-OFF ADJUSTMENT RANGE......... 98 75 75 RUN-OFF WITH OVERHEAD CABINETS ADJUSTMENT RANGE..... 100 75 SECONDARY DESK BASICS............................. 101 HIGH SECONDARY DESK BASICS........................ 102 RUN-OFF & HIGH SECONDARY DESK BASICS................ 103 75 75 LOW SECONDARY DESK BASICS......................... 104 75 RUN-OFF & LOW SECONDARY DESK BASICS................ 105 FREESTANDING DESK BASICS......................... 106 MULTI-LEVEL WORKSTATION APPLICATIONS............... 107 75 75 MULTI-LEVEL WORKSTATION FINISHES................. 110 75 FIXED-HEIGHT OR HEIGHT-ADJUSTABLE APPLICATIONS: PLANNING WITH WORKSURFACE GROMMETS............. 112 GRAIN DIRECTION/USER EDGE....................... 116 75 75 75 75

understanding multi-level workstations fixed-height The following should be considered when planning with Expansion Casegoods Fixed-Height Multi-Level Workstations. 76 76 76 All s must always be installed against a building wall Only Run-Off Worksurfaces, Run-Off with Glass Top and Overlapping Bridges with or without End Support must be mounted above a (B_MSD). Cannot be mounted on for Height-Adjustable Run-Off (B_ASH) The addition of Overhead Cabinet for Wall Panels, Mounted Towers and Storage for is ruled under the conditions of the maximum unsupported span rule that can be found on page 90 of this section A Wall Panel is mandatory for mounting a Run-Off Worksurface, a Run-Off with Glass Top or an Overlapping Bridge for Low A Wall Panel cannot be used for mounting a Run-Off Worksurface or Overlapping Bridge with End Support for Low Edge-clamped and bolt-thru accessories cannot be mounted on glass products 76 multi-level workstations with run-off high secondary desk 76 76 76 76 = This configuration can be created with a combination of a: High (B_MSDH) Run-Off Worksurface (B_MPH) High 76 76 76 76 76 76

understanding multi-level workstations fixed-height (continued) multi-level workstations with run-off low secondary desk 77 77 = This configuration can be created with a combination of a: Low (B_MSDL) Run-Off with Glass Top and Dual Square Post Legs Low (BGMTLD) Wall Panel (B_WPA) 77 77 (Mandatory) 77 77 77 77 = This configuration can be created with a combination of a: Low (B_MSDL) Run-Off Worksurface with End Support Low (B_MPG) 77 77 77 77 77 77

application guides understanding multi-level workstations fixed-height (continued) U-shaped multi-level workstations with overlapping bridge high secondary desk This configuration can be created with a combination of a: = High (B_MSDH) Overlapping Bridge High (B_MBH) Primary Peninsula Desk for U-Shape Configuration (B_MDS) U-shaped multi-level workstations with overlapping bridge low secondary desk This configuration can be created with a combination of a: (Mandatory) Low (B_MSDL) Overlapping Bridge Low (B_MBL) Primary Desk for U-Shape Configuration (B_MDG) Wall Panel (B_WPA) = This configuration can be created with a combination of a: = Low (B_MSDL) Overlapping Bridge with End Support Low (B_MBG) Primary Desk for U-Shape Configuration (B_MDG)

understanding multi-level workstations fixed-height (continued) 79 standalone multi-level workstations with table/freestanding desks high secondary desk 79 = This configuration can be created with a combination of a: High (B_MSDH) Table Desk Open Frame Legs (B_MDWO) 79 79 79 79 79 standalone multi-level workstations with table/freestanding desks low secondary desk 79 79 = This configuration can be created with a combination of a: Low (B_MSDL) Table Desk with Glass Top (BGMTT) 79 79 79 79 79

high secondary desk basics fixed-height Expansion Casegoods high secondary desk can be used individually or with run-off or overlapping bridge to create diverse workstation configurations. 80 80 Grain direction is available along the width only All solid products are available in the same styles/thicknesses (D, M, X) as original Expansion Casegoods products Cannot be used with Height-Adjustable Run-Off All dimensions are nominal, widths or depths are reduced by a 0,5 % factor 80 80 80 High (B_MSDH) The products listed below must only be installed on High. It provides a support for: Run-Off Worksurface (B_MPH) Run-Off with Glass Top (BGMTH) Overlapping Bridge (B_MBH) Must always be installed against a building wall When 1" (D) or 1 3/16" (M) thickness is specified, the gables are 1" thick When 1 9/16" (X) thickness is specified, the gables are 1 1/2" thick Worksurfaces can be specified without (N) or with rectangular grommets. Four position styles are available: Both Ends (B) Centered (C) Left (L) Right (R) Can also support Wall Panels, Wall Panels for Overhead Cabinets or Mounted Towers for High Unloaded and unattached s must not be filled with Stretch Pedestals or lateral files for secondary desks for more than half its width 80 80 80 54" to 108" w 20" or 24" d Rectangular Grommets All worksurfaces are available with or without factory-made grommet cut outs Provide openings for electrical wiring and communication cables Left or right option Rectangular Grommet are optimized for MAST Monitor Arm (YMST_) application, see on page 112 for detail They can be changed with Elliptical Grommets (BLGE) which can be specified separately 80 80 26 13/16" h 80 80 Bookcases (BSSO) and Multi-Functional Storage (BSSM) can act as a passive storage Five Storage for styles can be specified separately and installed under a High : 80 80 Bookcase (BSSO) Multi-Functional Storage (BSSM) Stretch Pedestal (BSSP) Lateral File (BSSL) Storage Cabinet (BSSD)

run-off & high secondary desk basics fixed-height All glass tops are available in 3/8" (10 mm) tempered glass The grommet position varies depending the worksurface specified, refer on page 112 for more details Enables L- or T-Shaped Configurations One end must be mounted on a High Only an optional Suspended Modesty Panel or Power Tray can be used under these worksurfaces and can be specified separately. For application of a modesty panel, refer to page 129 Cannot support any storage or Wall Panel 81 81 81 Run-Off Worksurface High (B_MPH) Worksurfaces can be specified without (N) or with rectangular grommets. Three position styles are available: Centered (C) Left (L) Right (R) The other end is supported by one of the five support styles below (not included): Run-Off with Glass Top High Secondary Desk (BGMTH) Two support styles are available and are included with Run-Off: Bevel Base (B) Dual Square Post Legs (S) Worksurfaces can be specified without (N) or with rectangular grommets. Two position styles are available: Centered (C) Offset (O) Offset grommet locations are handed configurations 81 81 81 Bevel Bases (B) Semi-Supported Leg (E) Frame Legs (W) Central Square Post Leg (Q) Storage (S) A 28" high freestanding storage cannot be installed under a glass top product Not all optical computer mouse are compatible on glass worksurface, Desk Pad (YPDP) is recommended (see Complements products) Cannot suspend any accessories or storage 81 81 Rectangular Grommets All worksurfaces are available with or without factory-made grommet cut outs Provide openings for electrical wiring and communication cables 81 Gap (see below) 60", 66", 72", 78", 84", 90" w Left or right option are optimized for MAST Monitor Arm (YMST_) application, see on page 112 for detail They can be changed with Elliptical Grommets (BLGE) which can be specified separately 81 81 24", 30", 36" d 29" from floor to top of finished worksurface 81 Gap between underneath Run-Off Worksurface or Run-Off and above 81 Solid Top Glass Top 1 3/16" 1 11/16" 81

overlapping bridge & high secondary desk basics fixed-height Also available: 82 82 82 82 Overlapping Bridge High (B_MBH) Enables U-Shaped Configurations Must be supported by a High on one end and connected to a desk to create a U-shaped configuration Must be linked with: Primary Desk for U-Shape Configuration (B_MDG) Primary Peninsula Desk for U-Shape Configuration (B_MDS) Preconfigured Desks, Credenzas, Table/ Freestanding Desks (B_MDWO, B_MDWB and B_MDWF) or Standard Desks Non-handed and reversible on-site Worksurface can be specified without (N) or with a centered rectangular grommet (C) Only an optional Suspended Modesty Panel or Power Tray can be used under the bridge and can be specified separately. For application of a modesty panel, refer to page 129 Cannot support any storage or Wall panel 82 82 82 82 60", 66", 72", 78", 84" w 82 24" or 30" d 82 82 82 82 82

low secondary desk basics fixed-height???? Expansion Casegoods low secondary desk can be used individually or with run-off or overlapping bridges to create diverse workstation configurations. Grain direction is available along the width only All solid products are available in the same styles/thicknesses (D, M, X) as original Expansion Casegoods products Cannot be used with Height-Adjustable Run-Off All dimensions are nominal, widths or depths are reduced by a 0,5 % factor 83 83 Low (B_MSDL) The products listed below must only be installed on Low. It provides a support for: Run-Off Worksurface (B_MPL) Run-Off with Glass Top (BGMTL) Overlapping Bridge (B_MBL) Run-Off Worksurface with End Support (B_MPG) Overlapping Bridge with End Support (B_MBG) Must always be installed against a building wall When 1" (D) or 1 3/16" (M) thickness is specified, the gables are 1" thick When 1 9/16" (X) thickness is specified, the gables are 1 1/2" thick Can also support Wall Panels, Wall Panels for Overhead Cabinets or Mounted Towers for Low Worksurfaces can be specified without (N) or with rectangular grommets. Four position styles are available: Both Ends (B) Centered (C) Left (L) Right (R) 83 83 83 Rectangular Grommets All worksurfaces are available with or without factory-made grommet cut outs Provide openings for electrical wiring and communication cables Left or right option are optimized for MAST Monitor Arm (YMST_) application, see on page 112 for detail They can be changed with Elliptical Grommets (BLGE) which can be specified separately 83 83 83 83 17 3/16" h 20" or 24" d 54" to 108" w 83 83 Bookcase (BSSO) can act as a passive storage Two Storage for styles can be specified separately and installed under a Low : 83 83 Bookcase (BSSO) Lateral File (BSSL) 83

run-off & low secondary desk basics fixed-height All glass tops are available in 3/8" (10 mm) tempered glass The grommet position varies depending the worksurface specified, refer on page 112 for more details 84 84 84 Enables L- or T-Shaped Configurations One end must be mounted on a Low A Wall Panel is mandatory to support Run-Off Worksurface (B_MPL) or Run-Off with Glass Top (BGMTL) for Low s Half solid modesty panel is included and cannot be specified separately. When grommet option (C, E, L or R) is specified for worksurface, the modesty panel comes also with a central grommet Cannot support any storage or Wall Panel Cannot suspend any accessories or storage A Power Tray can be used under these worksurfaces and can be specified separately Position of modesty panel can interfere with under-worksurface power and data specified on the Wall Panel. Use specification software appropriately 84 84 84 84 84 Run-Off Worksurface Low (B_MPL) and Run-Off Worksurface with End Support Low (B_MPG) The other end is supported by one of the four support styles below (not included): Worksurfaces can be specified without (N) or with rectangular grommets. Four position styles are available: Centered (C) End of Worksurface (E) Left (L) Right (R) The Under Run-Off Worksurface Center (UC) cut-out option is available only on the 30" or 36" deep Run-Off Worksurface with End Support (B_MPG) and when support style (E) or (W) is specified Bevel Bases (B) Semi-Supported Leg (E) Frame Legs (W) Central Square Post Leg (Q) Each cut out comes with a Power Bar and Cover When a None Power and Data style (NN) is specified, a Cable Pass-Through Ring is provided Run-Off with Glass Top Low Secondary Desk (BGMTL) Two support styles are available and are included with Run-Off: Bevel Base (B) Dual Square Post Legs (S) Worksurfaces can be specified without (N) or with rectangular grommets. Three position styles are available: Centered (C) End of Worksurface (E) Offset (O) Offset grommet locations are handed configurations Not all optical computer mouse are compatible on glass worksurface, Desk Pad (YPDP) is recommended (see Complements products) A 28" high freestanding storage cannot be installed under a glass top product 84 84 84 84 Gap (see below) 17 3/16" above floor 60", 66", 72", 78", 84", 90" w 29" from floor to top of finished worksurface Rectangular Grommets All worksurfaces are available with or without factory-made grommet cut outs Provide openings for electrical wiring and communication cables Left or right option are optimized for MAST Monitor Arm (YMST_) application, see on page 112 for detail They can be changed with Elliptical Grommets (BLGE) which can be specified separately 84 84 Gap between underneath Run-Off Worksurface or Run-Off and above Solid Top 10 3/8" Glass Top 9 1/2" 24", 30", 36" d

overlapping bridge & low secondary desk basics fixed-height Also available: 85 Overlapping Bridge Low (B_MBL) or Overlapping Bridge with End Support Low (B_MBG) Enables U-Shaped Configurations Must be supported by a Low on one end and connected to a desk to create a U-shaped configuration A Wall Panel is mandatory to support Overlapping Bridge for Low s (B_MBL) Must be linked with: Primary Desk for U-Shape Configuration (B_MDG) Primary Peninsula Desk for U-Shape Configuration (B_MDS) Preconfigured Desks, Credenzas, Table/ Freestanding Desks (B_MDWO, B_MDWB and B_MDWF) or Standard Desks Non-handed and reversible on-site Worksurfaces can be specified without (N) or with rectangular grommets. Two position styles are available: Centered (C) End of Worksurface (E) Half Solid Modesty Panel is included and cannot be specified separately. When grommet option (C or E) is specified for worksurface, the modesty panel comes also with a central grommet Cannot support any storage or Wall Panel A Power Tray can be used under the bridge and can be specified separately Each cut out comes with a Power Bar and Cover The Under Run-Off Worksurface Center (UC) cut-out option is available only on the 30" or 36" deep Overlapping Bridge with End Support (B_MBG) When a None Power and Data style (NN) is specified, a Cable Pass-Through Ring is provided 85 85 85 85 85 85 85 85 60", 66", 72", 78", 84" w 24"or 30" d 85 85 85 85 85

table/freestanding desk basics fixed-height Expansion Casegoods multi-level workstations offer two desk styles; Table and Freestanding Desks. 86 Grain direction is available along the width only All solid products are available in the same styles/thicknesses (D, M, X) as original Expansion Casegoods products All dimensions are nominal, widths are reduced by a 0,5 % factor 86 86 86 Table Desk Open Frame Legs (B_MDWO) and Table Desk with End Panels Frame Legs (B_MDWF) Comes with two Frame Legs Three Frame Legs style are available: 86 86 86 86 Open Solid Infill End Panel Worksurface can be specified without (N) or with rectangular grommets on Both Ends (B) Standard position of reinforcing bar will limit the use of pedestal or Multi-Functional Drawer to one unit, refer to page 130 for more details An optional Suspended Modesty Panel or Power Tray can be used under the Table Desk and can be specified separately. For modesty panel application, refer to page 129 These desks are freestanding Glass Infill End Panel Height is 29" from floor to top of finished worksurface All 28" high non-metal Freestanding Storage can be specified separately and installed under desk Cannot support any storage or Wall Panel 86 86 86 86 86 86 24", 30", 36" d 54", 60", 66", 72", 78", 84", 90" w Rectangular and/or Square Grommets Provide openings for electrical wiring and communication cables All worksurfaces are available with or without factory-made grommet cut outs When the Square Grommet is specified, the worksurface only comes with a cut-out and without grommet. The Power Cube must be specified to complete the installation Left or right option Rectangular Grommet are optimized for MAST Monitor Arm (YMST_) application, see on page 112 for detail Only Rectangular Grommets can be changed with Elliptical Grommets (BLGE) which can be specified separately

table/freestanding desk basics fixed-height (continued) All glass tops are available in 3/8" (10 mm) tempered glass Not all optical computer mouse are compatible on glass worksurface, Desk Pad (YPDP) is recommended (see Complements products) Also available: 87 These desks are freestanding Height is 29" from floor to top of finished worksurface A 28" high freestanding storage cannot be installed under these products Cannot support any storage or Wall Panel Cannot suspend any accessories and storage A Power Tray can be used under these desks and can be specified separately 87 87 17 7/16" above floor Freestanding Desk Bevel Bases (B_MDWB) Comes with two fixed-height Bevel Bases and Solid End Panels Worksurfaces can be specified without (N) or with rectangular grommets. Three position styles are available: Both Ends (B) Left (L) Right (R) Rectangular and square grommets are also available. Four position styles are available: Both Ends (H) Rectangular (L) and Square (R) Both Ends (I) Square (L) and Rectangular (R) Left (M) Rectangular and Square Right (S) Rectangular and Square A Solid Suspended Modesty Panel is included. No grommet is provided on the modesty panel, a clearance of 3/8" has been planned between the worksurface and the base of the modesty panel to route the cables Table Desk with Glass Top (BGMTT) Comes with four Square Post Legs Worksurfaces can be specified without (N) or with rectangular grommets. Three position styles are available: Both Ends (B) Left (L) Right (R) Only an optional Suspended Modesty Panel can be specified separately. For modesty panel application, refer to page 129 87 87 87 87 87 87 87 87 87 87 87

primary desk for U-shape configuration basics fixed-height Expansion Casegoods multi-level workstations offer two U-Shape desk styles; Primary Desk and Primary Peninsula Desk. 88 Grain direction is available along the width only All solid products are available in the same styles/thicknesses (D, M, X) as original Expansion Casegoods products All dimensions are nominal, widths are reduced by a 0,5 % factor 88 88 88 88 88 88 These desks are semi-freestanding and must be connected to a Overlapping Bridge for U-shape applications. They cannot be used alone Must be connected with: Overlapping Bridge High (B_MBH) Overlapping Bridge Low (B_MBL) Overlapping Bridge with End Support Low (B_MBG) When 1" (D) or 1 3/16" (M) thickness is specified, the gables are 1" thick When 1 9/16" (X) thickness is specified, the gables are 1 1/2" thick All 28" high non-metal Freestanding Storage can be specified separately and installed under desk Standard position of reinforcing bar will limit the use of pedestal or Multi-Functional Drawer to one unit, refer to page 130 for more details An optional Suspended Modesty Panel or Power Tray can be used under these desks and can be specified separately. For modesty panel application, refer to page 129 Cannot support any storage or Wall Panel Primary Desk for U-Shape Configuration (B_MDG) Comes with two Semi-Supported Legs Worksurface can be specified without (N) or with rectangular grommets on Both Ends (B) Primary Peninsula Desk for U-Shape Configuration (B_MDS) Comes with one Semi-Supported Leg Worksurface can be specified without (N) or with rectangular grommets on End of Worksurface (E) The other end is supported by one of the two support styles below (not included): 88 Open Solid Infill End Panel Frame Leg (W) Glass Infill End Panel 88 Central Square Post Leg (Q) 88 88 29" from floor to top of finished worksurface 88 24", 30", 36" d 60", 66", 72", 78", 84", 90" w 88 88

run-off worksurface support applications fixed-height Run-Off Worksurfaces can be used with a variety of support styles. Supports the end of a worksurface to maintain stability The supports listed below can only be specified under Run-Off Worksurfaces but are not included and must be ordered separately supporting applications 28" high freestanding storage and other supports Supported by a Freestanding Storage Can only be installed under a Run-Off Worksurface for High (B_MPH) The metal Freestanding Storage cannot be used as a support Must be installed with Spacer Attachments to maintain stability When storage style is specified, only the Spacer Attachments and hardware are included with worksurface Side-Supported Configurations Cabinet depth must equal depth of worksurface under which it is installed 89 89 89 89 89 89 Back-Supported Configurations Cabinet width must equal depth of worksurface under which it is installed 89 Central Square Post Leg (BWSQ) Can be used under all Run-Off Worksurface styles Frame Legs (BWWO, BWWFL, or BWWFG) Must equal depth of run-off worksurface under which it is installed Three Frame Leg support styles are available: 89 89 29" from floor to top of finished worksurface 29" from floor to top of finished worksurface Open Solid Infill End Panel 89 Glass Infill End Panel 89 Semi-Supported Leg Solid (BWGL) Must equal depth of run-off worksurface under which it is installed Specified thicknesses of Semi- Supported Leg and Run-Off Worksurface must be the same Cannot be replace by a Semi- Supported Gable with Spacer (BWGG) Fixed-Height Bevel Base Solid End Panel (BWWB) Must equal depth of run-off worksurface under which it is installed It is not available with 24" deep worksurface 89 89 89

multi-level workstation applications fixed-height The maximum unsupported span rule is the key of planning Multi-Level Workstations efficiently. 90 The applications shown below are applicable with High or Low workstations maximum unsupported span allowed loaded rule 90 90 With Wall Panel for Overhead Cabinet and Overhead Cabinet Application With Mounted Towers Application 90 90 66" max. Maximum unsupported span allowed is 66" 66" max. If the is wider than 66", a Storage for is necessary to reduce its unsupported span to a maximum of 66" On these applications shown above, the Run-Off Worksurface or Run-Off with Glass Top can be placed off-module on the L-, T- or U-Shape Configurations are allowed 90 maximum unsupported span allowed unloaded rule 90 90 90 84" max. With or Without Wall Panel and Run-Off Worksurface or Run-Off with Glass Top Application Maximum unsupported span allowed is 84" If the is wider than 84", a Storage for is necessary to reduce its unsupported span to a maximum of 84" On these applications shown above, the Run-Off Worksurface or Run-Off with Glass Top must be placed at one extremity of the. If not, the loaded rule applies Only L- or U-Shape Configurations are allowed 84" max. With or Without Wall Panel or Run-Off Worksurface or Run-Off with Glass Top Application 90 90 90 90 90 recesses for run-off worksurfaces or run-off with glass top Only applicable for Run-Off Worksurfaces, Run-Off with Glass Top and Overlapping Bridge for High Two recess styles are allowed: Recessed Visitor Option Allows more kneespace clearance for visitors and lengthens the usable footprint of a workstation Can be offset by up to 6" Applicable on High and Low Workstations up to 6" up to 6" Recessed from Rear End of the High Four positions are allowed: Flush: does not allow mounting a wall panel 1" recessed: flush with wall panel 2" recessed: 1" gap between wall panel and end worksurface edge allows routing wires 6" recessed: provides direct access to the grommet on secondary desk and lengthens the usable footprint of the workstation

multi-level workstation finishes fixed-height Multi-Level Workstations and related parts are available in a wide variety of finish colors. Finish codes must be included in the order. All Laminate components are protected with a solid plastic edge For an overview of which products are offered in Flintwood finishes, refer to the Expansion Casegoods product map on Teknion's website 91 Edge Trims Are available: Straight Trim (6) or Flintwood Flat Trim (9) Stright Trim (6) is avalable in Edge Trim colors, Flintwood Flat Trim will match the surface color Rectangular Grommets Are available in Clear Anodized Coordinate (AC), Soft Gris (B), Storm White (Q), Very White (V), Anthracite (X), Crisp Grey (6) or Platinum (7) colors 91 91 91 91 Glass Top Edge Corner Are chamfered-flat polished and dubbed-corner Table Desk Frame and Supports Are available in Foundation, Mica, Coordinate Colors, or Clear Anodized (AC) When Square Post Legs on Run-Off or Table Desk with Glass Top are specified, the levelers is finished in Chrome If Clear Anodized (AC) for Support and Frame Finish is selected, the Hardware Finish is finished in Arctic Glass Top and Glass End Panel for Bevel Base Glass Worksurface is available in 3/8" (10 mm) and End Panel is avalable in 1/4" (6 mm) Back- Painted tempered glass Metal Bevel Base with Levelers and Hardware Are available in Foundation, Mica or Coordinate Colors Levelers will match the Metal Bevel Base color Levelers Finished in Black Frame Legs Are available in Foundation, Mica, Coordinate Colors or Clear Anodized (AC) Solid Infill End Panel Frame Legs Are available in Source Laminate or Flintwood (No Cathedral) colors Glass Infill End Panel Frame Legs Are available in 5/32" (4 mm) Standard or Back-Painted tempered glass Standard glass finish: Frosted (FT) is a single-sided etched tempered glass which is facing inward of desk Half-Height Modesty Panels Solid Are available in Source Laminate or Flintwood (No Cathedral) colors Glass Are available in 1/4" (6 mm) Standard or Back-Painted tempered glass Standard glass finish: Frosted (FT) is a single-sided etched tempered glass which is facing inward of desk 91 91 91 91 91 91 91 91 91

92 92 application guides multi-level workstation finishes fixed-height (continued) Hardware Available in Foundation, Mica or Coordinate Colors Coordinate colors are solid colors that can be used to match wood prints Coordinate Color Finishes: M5 Maple M6 Anigre M7 Cherry M8 Royal Cherry Q4 Espresso Reflect Q6 Stainless Q7 Walnut Cathedralgrain Q9 Mercurial Walnut R7 Java Walnut R8 Urban Walnut R9 Choice Maple V1 Estate Cherry VD Campus Oak VL Flax Reflect VV Pecan Reflect W8 Cocoa Brown Reflect W9 Sycamore Reflect 92 92 92 92 92 92 Hardware for End Support Will match End Support finish 92 92 92 92 92 Gables / End Panel for Bevel Base / Worksurfaces / End Support for Run-Off, Half-Height Modesty Panel or s Worksurface Worksurface/ Gable/End Support/ Gable/ End Panel for Bevel Base/ Thickness End Panel for Edge Trim End Panel for Bevel Base End Support Modesty Panel Bevel Base Finish Finish Thickness Finish Finish D 1" Source Lam. All 1" Source Lam. Source Lam. M 1 3/16" Foundation Lam.* All 1" Source Lam. Source Lam. or Flintwood (No Cathedral) or Flintwood N/A 1" Flintwood Flintwood (No Cathedral) (No Cathedral) (No Cathedral) X 1 9/16" Foundation Lam. StormWhite, 1 1/2" Source Lam. Source Lam. (Storm White, Very White or (Storm White, (Storm White, Very White or W. Prints Very White or Very White or W. Prints) W. Prints) W. Prints) or Flintwood N/A 1 1/2" Flintwood Flintwood (No Cathedral) (No Cathedral) (No Cathedral) * The Foundation Laminate Patterns are not available with Freestanding Desk Bevel Bases (B_MDWB) only. 92

understanding multi-level workstations height-adjustable???? The following should be considered when planning with Expansion Casegoods Height-Adjustable Multi-Level Workstations. All s for Height-Adjustable Run-Off must always be installed against a building wall Only Height-Adjustable Run-Off must be mounted above a for Height-Adjustable Run-Off (B_ASH). Cannot be mounted on (B_MSD) The addition of Overhead Cabinet for Wall Panels, Mounted Towers and Storage for is ruled under the conditions of the maximum unsupported span rule that can be found on page 109 of this section A Storage for (BSSO, BSSM or BSSHA) is mandatory to hide Height-Adjustable Mechanism A Wall Panel is not mandatory for mounting a Height-Adjustable Run-Off Edge-clamped accessories cannot be positioned above the High 93 93 93 multi-level workstations with height-adjustable run-off high secondary desk 93 93 93 93 This configuration can be created with a combination of a: 93 (Mandatory) = High for Height-Adjustable Run-Off (B_ASHH) Height-Adjustable Run-Off High Bevel Base (B_APHB) Bookcase for High (BSSOH) 93 93 93 (Mandatory) 93 93 93

understanding multi-level workstations height-adjustable (continued) 94 94 multi-level workstations with height-adjustable run-off low secondary desk 94 94 94 = This configuration can be created with a combination of a: Low for Height-Adjustable Run-Off (B_ASHL) Height-Adjustable Run-Off with Glass Top Low Bevel Base (BGATLB) Mechanism Cover for Height-Adjustable Run-Off Low (BSSHAL) (Mandatory) 94 94 (Mandatory) 94 94 94 94 (Mandatory) = This configuration can be created with a combination of a: Low for Height-Adjustable Run-Off (B_ASHL) Height-Adjustable Run-Off Low Secondary Desk Bevel Base (B_APLB) Bookcase for Low (BSSOL) 94 94 (Mandatory) 94

understanding multi-level workstations height-adjustable (continued) 95 standalone multi-level workstations with height-adjustable desk high secondary desk 95 = This configuration can be created with a combination of a: High (B_MSDH) Height-Adjustable Desk Bevel Bases (B_ADWB) 95 95 95 95 95 standalone multi-level workstations with height-adjustable desk low secondary desk 95 95 = This configuration can be created with a combination of a: Low (B_MSDL) Height-Adjustable Desk Bevel Bases (B_ADWB) 95 95 95 95 95

freestanding desk & run-off components height-adjustable 96 96 96 freestanding desk 6 1 8 1 2 3 4 5 Worksurface Reinforcing Bar Height-Adjustable Bevel Base are included with Height-Adjustable Desk and Run-Off. The leg is composed of two metal skins that hide Height- Adjustable Mechanism Height-Adjustable Mechanism with Cover is included with Height-Adjustable Run-Off. The cover also allows electricity management U-Channel with Levelers comes with Run-Off and allows to fix the Height-Adjustable Mechanism to the 96 3 9 6 Power Tray, Power Bar Bracket and Wire Clips Manage wires below the worksurface A Power Bar (RLPP) can be specified separately. It can be placed into Power Bar Bracket included with Power Tray 96 7 Electric Control Box Is concealed in the center Power Tray Plugs directly on the building wall outlet 96 8 9 Switch can be located anywhere along the worksurface Levelers are included with base and height-adjustable mechanism and have an adjustment range of 3" 96 run-off 7 96 96 2 4 5 92" to 107" 96 96 Weight Capacity * Solid Top with Mechanism: 96 96 1" (D) 150 lbs 1 3/16" (M) 150 lbs 1 9/16" (X) 100 lbs Glass Top with Mechanism: 100 lbs * Note that all additions on Height-Adjustable Run- Off Bevel Base must be considered (ie: MAST Monitor Arm, Computer Display, Modesty Panel...) 96

application guides freestanding desk & run-off components height-adjustable (suite) Switch for Height-Adjustable Mechanism Supports sit-to-stand height-adjustment Can be placed on-site left or right Cannot be located over a High because it will interfere 0.1 Watt resting power draw Three underworksurface switches can be specified: Display with Up/Down Memory (D) Basic up/down function Display Three programmable memory settings Error code read-out Finish: Ebony Coordinate Toggle Up/Down (F, G or H) Basic up/down function Soft touch material Contoured shape for ease of use Finishes: Platinum (F), Crisp Grey (G) or Anthracite (H) Display Toggle with Memory (M, N or O) Large display Four programmable memory settings GPS: Teknion's Sit/Stand Guidens and Reminders Aid Soft touch material Can be reprogrammed using Teknion Switch Configuration software Error code read-out with QR code Finishes: Platinum (M), Crisp Grey (N) or Anthracite (O) NOTE Display switches include the ability to change units from metric/imperial and the display height to reflect the actual height once installed. Switch Positions Underworksurface Switch Style Laminate Edge Glass Edge Display with Up/Down Memory (D) Toggle Up/Down (F, G or H) Display Toggle with Memory (M, N or O)

freestanding desk & run-off adjustment range height-adjustable The following should be considered when planning with all height-adjustable run-off. 98 Can be easily adjusted to fit the individual and support multiple works styles Enable working in both seated and standing postures, supporting neutral postures, movement and comfort preferences throughout the work day All dimensions are nominal 98 98 Electric Extended Range Application (E) 98 98 98 Height-Adjustable Run-Off 48" h (Max. Height) 19" Adjustment Range 29" h (Min. Height) 98 98 98 High Can be only specified with: Height-Adjustable Run-Off High (B_APHB) 1" (D) or 1 3/16" (M) Worksurface Thickness only Floor 48" h (Max. Height) 22" Adjustment Range 26" h (Min. Height) 98 98 98 Low Can be only specified with: Height-Adjustable Desk (B_ADWB) Height-Adjustable Run-Off Low (B_APLB) 1" (D) or 1 3/16" (M) Worksurface Thickness only Floor 98 98

freestanding desk & run-off adjustment range height-adjustable (continued) 99 99 Electric Standard Range Application (S) 99 Height-Adjustable Run-Off 43" h (Max. Height) 14" Adjustment Range 29" h (Min. Height) 99 99 99 Floor 99 High Can be only specified with: Height-Adjustable Run-Off High (B_APHB) 1 9/16" Worksurface Thickness (X) only Height-Adjustable Run-Off with Glass Top High (BGATHB) 43" h (Max. Height) 17" Adjustment Range 26" h (Min. Height) 99 99 Low Floor 99 Can be only specified with: Height-Adjustable Run-Off Low (B_APLB) 1 9/16" (X) Worksurface Thickness only Height-Adjustable Run-Off with Glass Top Low (BGATLB) 99 99 99 99

run-off with overhead cabinets adjustment range height-adjustable Height-Adjustable Run-Off requires special dimensional considerations. The following outlines the planning recommendations and restrictions. 100 100 Teknion does not recommend the use of any overhead cabinet above the Height-Adjustable Run-Off. Damages or personal injuries may occur if accessories are positioned beneath the cabinet The clearance between the bottom of the overhead cabinet and the top of the worksurface at its highest position is provided below for guidance only 100 With Standard Overhead Cabinet Application With Cubic Overhead Cabinet Application 100 66" h or 72" h Datum Height 66" h or 72" h Datum Height 100 51" h or 58" h Bottom of Overhead Cabinet Minimum clearance at 43" or 48" high position (see chart below) 50" h or 54" h Bottom of Overhead Cabinet Minimum clearance at 43" or 48" high position (see chart below) 100 100 100 100 Floor Floor 100 100 Clearance between the top of the height-adjustable worksurface and underside of the standard overhead cabinet Height Application 66" 2 7/8" 2 3/4" 7 3/8" 7 5/8" 72" Worksurface Style 1" (D 48") Height-Adjustable Run-Off 1 3/16" (M 48") 1 9/16" (X 43") 10 mm (Glass 43") 9 1/8" 9" 13 1/2" 13 5/8" Clearance between the top of the height-adjustable worksurface and underside of the cubic overhead cabinet Height Application Height-Adjustable Run-Off 66" 1 5/8" 1 3/8" 6" 72" Worksurface Style 1" (D 48") 1 3/16" (M 48") 1 9/16" (X 43") 5 7/8" 5 3/4" 10 3/8" 10 mm (Glass 43") 6 3/8" 10 5/8" 100 100 100

secondary desk basics height-adjustable Expansion Casegoods high or low secondary desk must be used with Height-Adjustable Run-Off to create diverse workstation configurations. Grain direction is available along the width only All solid products are available in the same styles/thicknesses (D, M, X) as original Expansion Casegoods products Cannot be used with Run-Off Worksurfaces, Run-Off with Glass Top and Overlapping Bridges All dimensions are nominal, widths or depths are reduced by a 0,5 % factor 101 101 Cut-out Position for Secondary Leg Mechanism on The cut-out on secondary desk is determined with the Height-Adjustable Worksurface Depth and the Worksurface Position (always specified from left) Example: 30" deep worksurface positionned at 18" from left Worksurface Position (From Left) 12" 18" 06" 00" 101 101 101 Height-Adjustable Worksurface Depth (30") 101 102" w 42" Worksurface Position (From Left) 20" or 24" d 30" Height-Adjustable Worksurface Depth example with high secondary desk for height-adjustable run-off 101 101 101 101 101 example with low secondary desk for height-adjustable run-off 20" or 24" d 36" Height-Adjustable Worksurface Depth 101 72" Worksurface Position (From Left) 108" w 101 101

high secondary desk basics height-adjustable 102 102 102 High for Height-Adjustable Run-Off (B_ASHH) The products listed below must only be installed on High. The secondary desk provides a support for: Height-Adjustable Run-Off with Bevel Base (B_APHB) Height-Adjustable Run-Off with Glass Top and Bevel Base (BGATHB) Must always be installed against a building wall When 1" (D) or 1 3/16" (M) thickness is specified, the gables are 1" thick When 1 9/16" (X) thickness is specified, the gables are 1 1/2" thick Worksurfaces can be specified without (N) or with rectangular grommets. Two position styles are available: Left (L) Right (R) Can also support Wall Panels, Wall Panels for Overhead Cabinets or Mounted Towers for High An U-Channel comes with Run-Off and allows to fix the Height-Adjustable Mechanism to the 102 102 102 60" to 108" w 20" or 24" d Rectangular Grommets All worksurfaces are available with or without factorymade grommet cut outs Provide openings for electrical wiring and communication cables Left or right option Rectangular Grommet are optimized for MAST Monitor Arm (YMST_) application, see on page 112 for detail They can be changed with Elliptical Grommets (BLGE) which can be specified separately 102 102 26 13/16" h 102 102 102 Bookcases (BSSO) and Multi-Functional Storage (BSSM) can act as a passive storage. These storage or Mechanism Cover (BSSHA) are mandatory under high secondary desk to hide height-adjustable mechanism of the Height-Adjustable Run-Off Bookcase (BSSO) Multi-Functional Storage (BSSM) Mechanism Cover for Height-Adjustable Run-Off (BSSHA) 102 These storage below cannot be installed under a Height-Adjustable Run-Off. But still can be specified anywhere else under a High 102 102 Stretch Pedestal (BSSP) Lateral File (BSSL) Storage Cabinet (BSSD)

run-off & high secondary desk basics height-adjustable All glass tops are available in 3/8" (10 mm) tempered glass Only Bevel Base support style is available and is included with Height-Adjustable Run-Off Can be specified Left (Shown) or Right handed Enables L- or T-Shaped Configurations One end must be mounted on a High for Height-Adjustable Run-Off Offset grommet locations are handed configurations Only an optional Suspended Modesty Panel can be specified separately. For application of a modesty panel, refer to page 129 Cannot support any storage or Wall Panel Cannot suspend any accessories or storage 103 103 103 Height-Adjustable Run-Off High Bevel Base (B_APHB) Comes with one Height-Adjustable Bevel Base with Solid End Panel and one Height- Adjustable Mechanism Worksurfaces can be specified without (N) or with rectangular grommets. Two position styles are available: Centered (C) Rectangular Offset (O) Rectangular Rectangular and square grommets are also available. Two position styles are available: Centered (D) Rectangular and Square Offset (P) Rectangular and Square Height-Adjustable Run-Off with Glass Top High Bevel Base (BGATHB) Comes with one Height-Adjustable Bevel Base with Glass End Panel and one Height- Adjustable Mechanism Worksurfaces can be specified without (N) or with rectangular grommets. Two position styles are available: Centered (C) Offset (O) Not all optical computer mouse are compatible on glass worksurface, Desk Pad (YPDP) is recommended (see Complements products) 103 103 103 103 103 103 Gap (see below) 60", 66", 72", 78", 84", 90" w 103 103 29" to 48" from floor to top of finished worksurface 103 Gap between underneath Height-Adjustable Run-Off and above for Height-Adjustable Run-Off Solid Top Glass Top 30" or 36" d 103 7/8" 1/16" 103

low secondary desk basics height-adjustable 104 104 104 Low for Height-Adjustable Run-Off (B_ASHL) The products listed below must only be installed on Low. The secondary desk provides a support for: Height-Adjustable Run-Off with Bevel Base (B_APLB) Height-Adjustable Run-Off with Glass Top and Bevel Base (BGATLB) Must always be installed against a building wall When 1" (D) or 1 3/16" (M) thickness is specified, the gables are 1" thick When 1 9/16" (X) thickness is specified, the gables are 1 1/2" thick Worksurfaces can be specified without (N) or with rectangular grommets. Two position styles are available: Left (L) Right (R) Can also support Wall Panels, Wall Panels for Overhead Cabinets or Mounted Towers for Low An U-Channel comes with Run-Off and allows to fix the Height-Adjustable Mechanism to the 104 104 104 Rectangular Grommets All worksurfaces are available with or without factorymade grommet cut outs Provide openings for electrical wiring and communication cables Left or right option are optimized for MAST Monitor Arm (YMST_) application, see on page 112 for detail They can be changed with Elliptical Grommets (BLGE) which can be specified separately 104 20" or 24" d 104 104 17 3/16" h 60" to 108" w 104 104 Bookcases (BSSO) can act as a passive storage. This storage or Mechanism Cover (BSSHA) are mandatory under low secondary desk to hide height-adjustable mechanism of the Height-Adjustable Run-Off Bookcase (BSSO) Mechanism Cover for Height-Adjustable Run-Off (BSSHA) 104 104 The storage below cannot be installed under a Height-Adjustable Run-Off. But still can be specified anywhere else under a Low Secondary Desk 104 Lateral File (BSSL)

run-off & low secondary desk basics height-adjustable All glass tops are available in 3/8" (10 mm) tempered glass Only Bevel Base support style is available and is included with Height-Adjustable Run-Off Can be specified Left (Shown) or Right handed Enables L- or T-Shaped Configurations One end must be mounted on a Low for Height-Adjustable Run-Off Offset grommet locations are handed configurations Only an optional Suspended Modesty Panel can be specified separately. For application of a modesty panel, refer to page 129 Cannot support any storage or Wall Panel Cannot suspend any accessories or storage 105 105 105 Height-Adjustable Run-Off Low Secondary Desk Bevel Base (B_APLB) Comes with one Height-Adjustable Bevel Base with Solid End Panel and one Height- Adjustable Mechanism Worksurfaces can be specified without (N) or with rectangular grommets. Two position styles are available: Centered (C) Rectangular Offset (O) Rectangular Rectangular and square grommets are also available. Two position styles are available: Centered (D) Rectangular and Square Offset (P) Rectangular and Square Height-Adjustable Run-Off with Glass Top Low Bevel Base (BGATLB) Comes with one Height-Adjustable Bevel Base with Glass End Panel and one Height- Adjustable Mechanism Worksurfaces can be specified without (N) or with rectangular grommets. Two position styles are available: Centered (C) Offset (O) Not all optical computer mouse are compatible on glass worksurface, Desk Pad (YPDP) is recommended (see Complements products) 105 105 105 105 105 60", 66", 72", 78", 84", 90" w 105 Gap (see below) 105 26" to 48" from floor to top of finished worksurface 105 30" or 36" d 105 Gap between underneath Height-Adjustable Run-Off and above for Height-Adjustable Run-Off Solid Top 7 3/8" Glass Top 6 1/2" 105 105

freestanding desk basics height-adjustable Expansion Casegoods height-adjustable multi-level workstations offer one desk style; Height-Adjustable Desk with Bevel Base. 106 Grain direction is available along the width only Available in the same styles/thicknesses (D, M, X) as original Expansion Casegoods products All dimensions are nominal, widths are reduced by a 0,5 % factor 106 106 106 106 106 Height-Adjustable Desk Bevel Bases (B_ADWB) This desk is freestanding and comes with two height-adjustable Bevel Bases and Solid End Panels Worksurfaces can be specified without (N) or with rectangular grommets. Three position styles are available: Both Ends (B) Left (L) Right (R) Rectangular and square grommets are also available. Four position styles are available: Both Ends (H) Rectangular (L) and Square (R) Both Ends (I) Square (L) and Rectangular (R) Left (M) Rectangular and Square Right (S) Rectangular and Square Comes with a switch to control height-adjustable worksurface. Three styles are available: Display with Up/Down Memory (D) Toggle Up/Down (F, G, or H) Display Toggle with Memory (M, N or O) A 28" high freestanding storage cannot be installed under this products Cannot support any storage or Wall Panel Cannot suspend any accessories or storage 106 106 106 60", 66", 72", 78", 84" w 30" d 106 106 106 106 106 26" to 48" from floor to top of finished worksurface Rectangular and/or Square Grommets Provide openings for electrical wiring and communication cables All worksurfaces are available with or without factory-made grommet cut outs When the Square Grommet is specified, the worksurface only comes with a cut-out and without grommet. The Power Cube must be specified to complete the installation Left or right option Rectangular Grommet are optimized for MAST Monitor Arm (YMST_) application, see on page 112 for detail Only Rectangular Grommets can be changed with Elliptical Grommets (BLGE) which can be specified separately

multi-level workstation applications height-adjustable A minimum clearance must be respected around the Height-Adjustable Run-Off to allow up and down movement of the mechanism without damaging the adjacent products 107 mandatory clearance for height-adjustable run-off Provide 1" minimum clearance to the initial dimension all around worksurface. This clearance facilitates height adjustment and prevent damage to adjacent products 1" min Wall Panel 1" min 1" min Mounted Tower 1" min Recessed from Rear End of the for Height-Adjustable Run-Off Worksurface Two positions are allowed: Without wall panel: 1" recessed allows up/down movement without damaging the building wall With Wall Panel or Wall Panel with Accessory Rail: 2" recessed allows up/down movement without damaging the Wall Panel or Accessory Rail 1 po 2 po 107 107 107 107 Minimum clearance allowed between Height-Adjustable Run-Off, a Mounted Tower and a Wall Panel 107 Wall Panel with Accessory Rail Light Shelf 1" Recessed without Wall Panel 2" Recessed with Wall Panel or Wall Panel with Accessory Rail 107 1" min 1" min 1" min 1" min A Power Bar and Cover included with Wall Panel cannot be aligned with the end of a Height- Adjustable Run-Off because the worksurface interfered with electric plugs. See on page 178 for details 107 107 Minimum clearance allowed between Height-Adjustable Run-Off, a Light Shelf and a Wall Panel with Accessory Rail 107 Freestanding Storage Wall Panel with Accessory Rail 107 1" min 1" min 1" min 107 1" min 107 Minimum clearance allowed between Height-Adjustable Run-Off and a Freestanding Storage 107

multi-level workstation applications height-adjustable (continued) 108 mandatory clearance for height-adjustable run-off (continued) The worksurface cannot be installed flush with all other adjacent product Flush Wall Panel Flush 108 108 Mounted Tower 108 108 Height-Adjustable Run-Off cannot be installed flush with a Mounted Tower and a Wall Panel Height-Adjustable Run-Off cannot be installed flush with a Freestanding Storage 108 Flush Flush 108 Mounted Tower 108 108 Height-Adjustable Run-Off cannot be installed flush from Rear End of the (without Wall Panel) 108 Freestanding Storage Flush Wall Panel with Accessory Rail 108 Wall Panel with Accessory Rail Flush Flush Flush 108 Light Shelf 108 108 Height-Adjustable Run-Off cannot be installed flush with a Light Shelf

multi-level workstation applications height-adjustable (continued) The maximum unsupported span rule is the key of planning Height-Adjustable Multi-Level Workstations efficiently. The applications shown below are applicable with High or Low for Height-Adjustable Run-Off workstations Enables L- or T-Shaped Configurations, but a maximum span must be respected 109 109 maximum unsupported span allowed loaded rules 109 109 66" max. 66" max. 109 With Wall Panel for Overhead Cabinet and Overhead Cabinet Application Maximum unsupported span allowed is 66" If the is wider than 66", a Storage for is necessary to reduce its unsupported span to a maximum of 66" between Height-Adjustable Mechanism and gable With Mounted Towers Application Mechanism Cover for Height-Adjustable Run-Off is not structural and therefore cannot be used to reduce the unsupported span 109 109 109 maximum unsupported span allowed unloaded rules 109 109 78" max. 78" max. 109 With or Without Wall Panel and Height-Adjustable Run-Off Application Maximum span allowed is 78" If the is wider than 78", a Storage for is necessary to reduce its unsupported span to a maximum of 78" between Height-Adjustable Mechanism and gable Mechanism Cover for Height-Adjustable Run-Off is not structural and therefore cannot be used to reduce the unsupported span With or Without Wall Panel or Height-Adjustable Run-Off Application 109 109 109