Associated Power Technologies 300XAC Linking Specifications

Similar documents
AC Power Sources. APT...The Power of Value! Manual Automated Modular. 400XAC Series 3 Phase AC Power Sources. 300XAC Series Modular AC Power Sources

Voltage Volts AC RMS , 1 Phase

PROGRAMMABLE AC POWER SOURCE MODEL 6500 SERIES MODEL 6500 SERIES. Programmable AC Power Source. Key Features:

Model kvac Hipot Tester, 5 kvdc Hipot Tester & Insulation Resistance Tester. Internal 4 or 8 Port Scanning Matrix available

Ground Bond & Optional HV & HC Scanner. Ground Bond & Functional Run Test. Ground Bond, Functional Run Test & Line Leakage Test. Features and Benefits

EAC/AFV-P SERIES. High performance programmable AC power source 600 VA to 5 kva only in 2 U or 5 U

SP300VAC1500W Programmable AC Source

Designed with self-diagnostic routine and protections

Applications Avionics Testing Power Line Simulation Production Test - Power Supplies - UPS - Telecom. SMARTWAVE Programmable AC/DC Power Source

AMX Series. Precision AC Test Power Single and Three Phase Linear AC Power Sources. Parallelable to 30 kva. T h e P o w e r o f E x p e r t i s e

PROGRAMMABLE AC POWER SOURCE MODEL 6500 SERIES MODEL 6500 SERIES. Programmable AC Power Source. Key Features:

Models 31120/31120A/31180/31180A Programmable AC Power Source

SP300VAC600W Programmable AC Source

ASX Series. High-Density AC Test Power Single and Three Phase Switchmode AC Power Sources. T h e P o w e r o f E x p e r t i s e.

California Instruments RP Series 2000 VA V 3 45 A. General purpose AC power sources

PROGRAMMABLE AC POWER SOURCE MODEL 6500 SERIES MODEL 6500 SERIES. Programmable AC Power Source. Key Features:

AC POWER SYSTEMS CATALOG

PID500 FULL FEATURED PID TEMPERATURE CONTROLLERS

Elgar SmartWave Series VA V A. High Performance AC/DC Power Source. and Boeing standards

Advanced Test Equipment Rentals ATEC (2832)

Parallel AMX AC Power Systems

The series allows users to compose. amplify the analog signal from arbitrary signal generator. Thus, it is capable of simulating the

IT7600 High Power Programmable AC power supply

California Instruments BPS Series kva V A / Phase. Overview. High Power AC Source. Expandable Power Levels.

200ADM-P. Current Injection System with Phase Shift A 3.000s 2.000A 50.00Hz 0.0. Features

Model 61511/61512/61611/61612

5V SERIES DC LOADS 5V SERIES DC LOADS. Key features:

3B SERIES AC & DC LOADS

Electronic AC Load ZSAC Series. 400 W up to 21,000 W 260 V up to 440 V 3 A up to 100 A. Rev. 3.03

BOP 1 KILOWATT 1000 WATTS OF FOUR-QUADRANT BIPOLAR POWER FROM KEPCO AN ISO 9001 COMPANY

PM6000. Voltech. Power Analyzer

PQA823 PQA824 Rel /01/2007

PQA823 PQA824 Rel /03/2007

Fluke 345. Power Quality Clamp Meter. The ideal meter for commissioning and troubleshooting modern electrical loads

6300 Series High Power And Programmable AC Power Source Operation Manual

The series allows users to compose. amplify the analog signal from arbitrary signal generator. Thus, it is capable of simulating the

PROGRAMMABLE AC POWER SOURCE MODEL 61511/61512/61611/61612

Energy Management Modular Smart Power Transducer Type SPT-90

Please use the Q & A utility to ask us any questions concerning the material being presented.

Metering Devices, Protective Relays, Software and Connectivity

G Series. Advanced Test Equipment Rentals ATEC (2832) AC Power Systems. 6 to 90 kva 45 to 5,000 Hz

Multi-functional Energy Metering IC

Agilent E3633A and E3634A DC Power Supplies

Applications. Other applications include:

DM-III Multitest & DM-III Multitest F Power Quality Recorders

DPF-MAC Auto power factor controller

California Instruments Ls Series VA V A kva Programmable AC Power Source / Analyzer

Monitoring Electric Network Via Internet

UNIVERSAL MEASURING INSTRUMENTS. TNM 34xx. TNM 3410 / 3420 / 3430 / 3440 Universal measuring instrument 1/49

Conzerv EM6400NG series

Programmable AC Power Source Model 9801

MICROPROCESSOR-BASED METERING EQUIPMENT SECTION 16901C PART 2

ULTRA RAPID POWER QUALITY ANALYZER

POWER AMPLIFIERS 4 QUADRANTS 3x500 VA to 3x1500 VA - THREE-PHASES

MC133C/133Ci. Electric Power/Energy Calibrator. Operation manual

RIGOL Data Sheet. DS1000E, DS1000D Series Digital Oscilloscopes DS1102E, DS1052E, DS1102D, DS1052D. Product Overview. Applications. Easy to Use Design

Advanced Test Equipment Rentals ATEC (2832)

Advanced Test Equipment Rentals ATEC (2832)

SUPPLY NETWORK ANALYZER CVM-96 SERIES

PRODUCT/TEST MANUAL 2V162K12 VOLTAGE REGULATOR RELAY

PM 6669 High-Precision Frequency Counter Specifications

LOW POWER PLA SERIES. PLA Series Brief Profile. Interfaces. Electronic DC Loads

IT7600 High performance programmable AC power supply. mu High power APPLICATIONS. Military& Aerospace. Scientific research& Institutions

Sirius 250/350 Watts, Single / Multi output AC-DC, modular power solution

PROGRAMMABLE AC POWER SOURCE

Energy Management. Type WM14 DIN Advanced version. Product Description 3-phase advanced power analyzer with integrated programming

n DC Voltage Measurement (DCV) 7461A n AC Voltage Measurement (ACV, ACV (AC+DC)) 7451A 7461A/7451A Additional error depending on the integration time

T 1000 PLUS Secondary Injection Relay Test Set

Current Clamp. 210

Energy Management. Type WM12-DIN. Product Description. How to order WM12-DIN AV5 3 D X. Type Selection. Input specifications

Ziegler EM 1320/30/40

Operating Guide October 2006

Laboratory for Fundamentals of Electrical Engineering (Labor Grundlagen der Elektrotechnik) Equipment Manuals for use in laboratory for measurement

RISH EM 3490 SS Kilowatt Hour Energy Meter With Rs485 RISH EM 3490 SS. Application : Product Features: Indication: Pulse Indication:

T 1000 PLUS. Secondary Injection Relay Test Set. Designed for testing relays and transducers

Quanti Presentation. Finero 2010 For Finero s Distributors Internal Use Only.

AFX Series. "Innovating Solutions for Control and Monitoring of Power" 6 kva/kw to 150 kva/kw

PRODUCT / TEST MANUAL 2V162K4 VOLTAGE REGULATOR RELAY

SUPPLY NETWORK ANALYZER. CVMk SERIES. CVMk-4C SERIES INSTRUCTION MANUAL. ( M / 00 B - Manual 1 / 2 ) (c) CIRCUTOR S.A.

ENGINEERING DATA SUBMITTAL For the Interconnection of Generation System

Multifunction network analyzer Q15U Q96U2L - Q96U4... Q15E Q96E MCU - MCUH Programmable transducer MCUU

RIGOL Data Sheet. DS1000E, DS1000D Series Digital Oscilloscopes DS1102E, DS1052E, DS1102D, DS1052D. Product Overview. Easy to Use Design.

California Instruments MX Series II kva V A / Phase. Overview

FREQUENCY SYNTHESIZERS, SIGNAL GENERATORS

ElNet VIP Current & Power Multimeter

Agilent E3631A Triple Output DC Power Supply

5500A. Multi-Product Calibrator. Extended Specifications 2005

AC/DC Power Sources ACS Series

Centrale de mesure Power Meter PM500 Merlin Gerin

400 W up to 21,000 W 260 V up to 440 V 3 A up to 100 A. Electronic Load ZSAC

Power analyzers and Energy Meters. Multifunction indicator. Type WM12-DIN. Product Description. How to order WM12-DIN AV5 3 D X.

Data Sheet. RISH Master Record %THD

5520A. Multi-Product Calibrator. Extended Specifications 2005

5520A. Multi-Product Calibrator. Extended Specifications

Model Range code System Power supply Option. variables. Housing for panel mounting, (front) protection degree IP50 and optional RS485 serial output.

Technical Specifications for Portable 3-Ø Power Analyzer

Chapter 6 Specifications

Power Meter Series PM3200 Functions and characteristics

ALPHA 50 MULTIFUNCTION METER (ALPHA SERIES)

Power analyzers and Energy Meters Power Analyzer Type WM14-96

Transcription:

INPUT 310XAC 320XAC 340XAC 360XAC Phase 1<l 1<l or 3<l 1<l: 200-240 V 3<l3W: Voltage 100-240 V ± 10% 200-240 V ± 10% Frequency OUTPUT AC VOLTAGE Voltage 47-63 z 5-300 V 200-240 V 3<l4W: 346-416 V ± 10% Power 1 KVA 2 KVA 4 KVA 6 KVA Ma Current Phase 5-150 V L 9.2 A @ 110 V 18.4 A @ 110 V 36.8 A @ 110 V 55.2 A @ 110 V 5-300 V 4.6 A @ 220 V 9.2 A @ 220 V 18.4 A @ 220 V 27.6 A @ 220 V Inrush Current (peak) 5-150 V L 36.8 A 73.6 A 147.2 A 220.8 A Frequency Phase TD 5-300 V 18.4 A 36.8 A 73.6 A 110.4 A 40.0-1000 z 1<l (Linking Available for 1<l3W or 3<l4W) <0.5% (Resistive Load) at 40.0-70.0 z & output voltage 80-140 V & 160-280 V, <1.0% (Resistive Load) at 70.1-500 z & output voltage 80-140 V & 160-280 V, <1.5% (Resistive Load) at 501-1000 z & output voltage 100-140 V & 160-280 V Crest Factor 23 Line Regulation Load Regulation DC Offset OUTPUT DC VOLTAGE Voltage ± ± (1% of output + 1 V) at Resistive Load, < 400 µsec response time {ardware} / ± 0.5V, < 1 sec. {Software} ± 5 mv 5-420 V Power 1000 W 2000 W 4000 W 6000 W Ma Current 5-210 V L 4.8 A 9.6 A 19.2 A 28.8 A 5-420 V 2.4 A 4.8 A 9.6 A 14.4 A Ripple & Noise (rms) 5-210 V L < 500 mv < 700 mv 5-420 V < 800 mv <1100 mv Ripple & Noise (p-p) < 3.0 Vp-p < 4.0 Vp-p MEASUREMENT AC Voltage Range 0.0-400.0 V ± (1% of reading + 2 counts) > 5V ± (1% of reading + 5 counts) > 5V Frequency Range 0.0-1000 z 0.1 z L ± 0.1 z @ 0.0-500 z ± 0.2 z @ 501-1000 z Current (rms) Range L 0.005 A - 1.200 A 0.005 A - 2.400 A 1.00 A - 13.00A 2.00 A - 26.00 A 0.05 A - 52.00 A 0.05 A - 78.00 A L 0.001 A L ± (1% of reading + 5 counts) @ 40.0-500 z, ± (1% of reading + 5 counts) @ 501-1000 z & CF <1.5 ± (1% of reading + 5 counts) @ 40-100 z, ± (1% of reading + 5 counts) @ 101-500 z > 0.1A, ± (1% of reading + 5 counts) @ 501-1000 z > 0.2A Current (peak) Range 0.0 A- 38.0 A 0.0 A - 76.0 A 0.0 A - 152.0 A 0.0A - 228 A 0.1 A ± (1% of reading + 5 counts) @ 40.0-70 z, ± (1.5% of reading + 10 counts) @ 70.1-500 z, ± (1.5% of reading + 10 counts) @ 501-1000 z & CF < 1.5 Power (W) Range L 0.0 W - 120.0 W 0.0 W - 240.0 W 100 W - 1300 W 200 W - 2600 W 0 W - 5200 W 0 W - 7800 W L 0. Page 1

MEASUREMENT AC Continued 310XAC 320XAC 340XAC 360XAC Power (W) ± (2% of reading + 15 counts) @ 40.0-500 z & PF 2 0.2, ± (2% of reading + 30 counts) @ 501-1000 z & PF L 2 0.5 ± (2% of reading + 5 counts) @ 40.0-500 z & PF 2 0.2, ± (2% of reading + 15 counts) @ 501-1000 z & PF 2 0.5 ± (2% of reading + 5 counts) @ 40.0-500 z & PF 2 0.2, ± (2% of reading + 15 counts) @ 501-1000 z & PF 2 0.5 Power Apparent (VA) Range L 0.0 VA - 120.0 VA 0.0 VA - 240.0 VA 100 VA - 1300 VA 200 VA - 2600 VA 0 VA - 5200 VA 0 VA - 7800 VA L A 1 VA V A, Calculated Value Power Reactive (Q) Range L 0.0 VAR - 120.0 VAR 0.0 VAR - 240.0 VAR 0 VAR - 1300 VAR 0 VAR - 2600 VAR 0 VAR - 5200 VAR 0 VAR - 7800 VAR L AR 1 VAR --(va)² - (w)², calculated value Power Factor Range 0-1.000 0.001 W/VA, Calcualted value and displayed to 3 significant digits Crest Factor Range 0-10.00 MEASUREMENT DC 0.01 Ap/A, Calculated value and displayed to 2 significant digits Voltage Range 0.0-420.0 V ± (1% of reading + 2 counts) ± (1% of reading + 5 counts) Current Range L 0.010 A - 1.200A 0.010 A - 2.400 A 1.00 A - 13.00 A 2.00 A - 26.00 A 0.05 A - 52.00 A 0.05 A - 78.00 A L 0.001 A L ± (1% of reading + 5 counts) ± (1% of reading + 5 counts) Power Range L 0.0 W - 120.0 W 0.0 W - 240.0 W TEST SETTING PARAMETERS Memory Memory Cycle 100 W - 1300 W 200 W - 2600 W 0 W - 5200 W 0 W - 7800 W L 0. L ± (2% of reading + 5 counts) ± (2% of reading + 5 counts) Range 1-50 Locations 0-9999, 0 = Cont., 1 = OFF Step AC Range 1-9 Step Cycle Votage Ouput DC Range 1-5 0-9999, 0 = Cont., 1 = OFF AC, DC Voltage Range AC 5.0-300.0 V igh/auto Mode 5.0-300.0 DC 5.0-420.0 V igh/low Range 5.0-420.0 ± (1% of reading + 2 counts) ± (1% of reading + 5 counts) Page 2

TEST SETTING PARAMETERS Continued 310XAC 320XAC 340XAC 360XAC Voltage i-lmt AC 5.0 V - 300 V 5.0 V - 300 V DC 5.0 V - 420 V 5.0 V - 420 V Voltage Lo-Lmt AC 5.0 V - 300 V 5.0 V - 300 V DC 5.0 V - 420 V 5.0 V - 420 V Frequency i-lmt Range 40.0-1000 z Frequency Lo-Lmt Range 40.0-1000 z Frequency 0.1 z @ 40.0-99.9 z, 1 z @ 100-1000 z Current (rms) i-lmt Range AC ±0.03% - 9.20 A, - 18.40 A, 0.10 A - 36.80 A, 0.10 A - 55.20 A, DC - 4.60 A - 9.60 A 0.10 A - 19.20 A 0.10 A - 28.80 A Current (rms) Lo-Lmt AC - 9.20 A - 18.40 A 0.10 A - 36.80 A 0.10 A - 55.20 A DC - 2.40 A - 4.80 A 0.10 A - 9.60 A 0.10 A - 14.40 A Current (rms) mp Current (peak) i-lmt 0.0 A- 38.0 A, 0.0 A - 76.0 A, ± (2.0% of setting + 2 counts) 0.0 A - 152.0 A, 0.0A - 228 A, Current (peak) Lo-Lmt 0.0 A- 38.0 A 0.0 A - 76.0 A 0.0 A - 152.0 A 0.0A - 228 A Power i-lmt 0.0 W - 1300 W, 0.0 W - 2600 W, 0 W - 5200 W, 0 W - 7800 W, Power Lo-Lmt 0.0 W - 1300 W, 0.0 W - 2600 W 0 W - 5200 W 0 W - 7800 W Power Apparent i-lmt Power Apparent Lo-Lmt Power Reactive i-lmt Power Reactive Lo-Lmt Power Factor i-lmt 0.0 VA - 1300 VA, 0 = OFF 0.0 VA - 1300 VA, 0 = OFF 0.0 VAR - 1300 VAR, 0.0 VAR - 1300 VAR, 0.0 VA - 2600 VA, 0.0 VA - 2600 VA, 0.0 VAR - 2600 VAR, 0.0 VAR - 2600 VAR, 0 VA - 5200 VA, 0 VA - 5200 VA, 0 VAR - 5200 VAR, 0 VAR - 5200 VAR, 0.000-1.000, Power Factor Lo-Lmt 0.000-1.000 Crest Factor i-lmt 0.00-10.00, Crest Factor Lo-Lmt 0.00-10.00 Timer Unit Second, Minute, our Ramp Up Range AC 0.00-999.9 DC 1.0-999.9, 0.1 (second, minute, hour) ± (0.1% + 0.05 sec.) 0 VA - 7800 VA, 0 VA - 7800 VA, 0 VAR - 7800 VAR, 0 VA - 7800 VA, Delay Range 0.5sec - 999.9 sec (1.0-999.9 when linked), 0.1 min - 999.9 min, 0.1 hr - 999.9 hr 0.1 (second, minute, hour) ± (0.1% + 0.1 sec) Dwell Range 0.5-999.9 (1.0-999.9 when linked), 0 = Constant 0.1 second, minute, hour ± (0.1% + 0.1 sec) Ramp Down Range AC 0.5-999.9 DC 1.0-999.9, 0.1 (second, minute, hour) ± (0.1% + 0.05 sec.) Phase Setting Linking A/B/C 3<l4W (120º), L1 - N & L2 - N 1<l3W (180º) Prompt Alphanumeric Start Angle 0º - 359º End Angle 0º - 359º Start & End Angle 1º ±1% (45 z - 65 z) Page 3

TEST SETTING PARAMETERS Continued 310XAC 320XAC 340XAC 360XAC Connect Transient SD-Volt SD-Site SD-Time Trans-Cycle SYSTEM PARAMETERS Auto Run ON, OFF ON, OFF (Only 40 z - 70 z is available) 0.0 V - 300.0 V 0.0-25.0 msec 0.5-999.9 msec (Trans-Cycle =ON) & 1-99 msec (Trans-Cycle = OFF) ON, OFF (Each cycle one surge/drop is created on waveform) 0-9999, 0=OFF Program, Manual Output Mode Manual AC, DC Single Step Program ON, OFF Alarm Contrast Power Up 0-9,, 9 = igh 1-9, 9 = igh ON, OFF, LAST Loop Cycle Program 0-9999, 0 = Cont., 1 = OFF Results OC Fold LAST, P/F, ALL ON, OFF Transient Manual ON, OFF Lock Mem Lock Volt Sense Synch Signal Linking Re-Config Address GENERAL Enhanced Over Load Capacity Operation Key Feature Remote Output Signal Calibration Key Lockout Synch Output Signal Graphic Display Interface Barcoding Protection Circuit Fan Rear Output ON, OFF ON, OFF INT, EXT START, Freq, EVENT, OFF, 5 V DC Signal AUTO DETECT (Parallel, 1<l3W, 3<l4W) YES (When Units Linked) IP, GPIB, RS-485 Over current 110% can hold for 1000 ms without protection Soft key, Numeric Key, Rotary Knob Output (Pass, Fail, Test in Process) Front Panel Soft Key & Password Protected 5 V DC 260 64 Mongraphic, LCD USB/RS-232 Barcode Capable Over Current, Over Temperature, Over Power, Over Voltage Temperature Controled Terminal Block Rack Mount andles Standard Standard & Caster Wheels PFC 97% at Full Load Efficiency 75% at Full Load 80% at Full Load CE Mark Parallel/Poly-Phase Output Multiple Source Linking: L1 - N & L2 - N 1<l3W (180º), A/B/C 3<l4W (120º) Operation Environment Dimensions Yes 0-40ºC / 20-80% R 430 (W) 267 () 500 430 (W) 133.5 () 530 (D) mm (D) mm 430 (W) 400.5 () 500 (D) mm Net Weight 21 Kg 22 Kg 50 kg 53 Kg OPTIONS Grounded Neutral Option 2 All Models GPIB Interface Option 3 All Models 7 Memory Remote Option 4 Input (Test, Reset, Recall Memory 1-7) Ethernet/RS-232/Barcode Option 5 All Models Linking Card Option 8 All Models Page 4

LINKING PARALLEL OUTPUT 1Cl2W 310XAC 320XAC 340XAC 360XAC Linked Units 2-3 Units, 1<l2W (L1 - N ) Voltage Phase 0-300 V 5-300 V Power Ma Ma Current # Units 2 1.8 KVA 3.6 KVA 7.2 KVA 10.8 KVA 3 2.7 KVA 5.4 KVA 10.8 KVA 16.2 KVA 0-150 V L(2) 14.72 A @ 20 V -110 V 29.44 A @ 20 V -110 V 58.88 A @ 20V - 110 V 88.32 A @ 20 V - 110 V L(3) 22.08 A @ 20 V - 110 V 44.16 A @ 20 V - 110 V 88.32 A @ 20 V - 110 V 132.48 A @ 20 V - 110 V 0-300 V (2) 7.36 A @ 20 V - 220 V 14.72 A @ 20 V - 220 V 29.44 A @ 20 V - 220 V 44.16 A @ 20 V - 220 V Line (3) 11.04 A @ 20 V - 220 V 22.08 A @ 20 V - 220 V 44.16 A @ 20 V -220 V 66.24 A @ 20 V - 220 V LINKING POLY-PASE OUTPUT 1Cl3W 310XAC 320XAC 340XAC 360XAC Linked Units 2 Units @ 180º, 1<l3W (L1-L2 - N) Voltage Power Ma Current Phase Ma Current Line Phase 0-600 V 10-600 V Line 0-300 V 5-300 V Ma 2 KVA 4 KVA 8 KVA 12 KVA 0-300 V L (1) 9.2 A @ 110 V 18.4 A @ 110 V 36.8 A @ 110 V 55.2 A @ 110 V 0-600 V (1) 4.6 A @ 220 V 9.2 A @ 220 V 18.4 A @ 220 V 27.6 A @ 220 V 0-300 V L (2) 9.2 A @ 220 V 18.4 A @ 220 V 36.8 A @ 220 V 55.2 A @ 220 V 0-600 V (2) 4.6 A @ 440 V 9.2 A @ 440 V 18.4 A @ 440 V 27.6 A @ 440 V LINKING POLY-PASE OUTPUT 3Cl4W 310XAC 320XAC 340XAC 360XAC Linked Units 3 Units @ 120º, 3<l4W (L1-L2-L3 - N) Voltage Phase 0-300 V 5-300 V Line 0-520 V 5-520 V Power Ma 3 KVA 6 KVA 12 KVA 18 KVA Ma Current Phase Ma Current LIne Ma Current 0-150 V L (1) 9.2 A @ 110 V 18.4 A @ 110 V 36.8 A @ 110 V 55.2 A @ 110 V 0-300 V (1) 4.6 A @ 220 V 9.2 A @ 220 V 18.4 A @ 220 V 27.6 A @220 V 0-150 V L (3) 9.2 A @ 190.5 V 18.4 A @ 190.5 V 36.8 A @ 190.5 V 55.2 A @ 190.5 V 0-300 V (3) 4.6 A @ 381 V 9.2 A @ 381 V 18.4 A @ 381 V 27.6 A @ 381 V 0-260 V L (3) 5.31 A @ 190.5 V 10.62 A @ 190.5 V 21.24 A @ 190.5 V 31.87 A @ 190.5 V Phase Delta 0-520 V (3) 2.65 A @ 381 V 5.31 A @ 381 V 10.62 A @ 381 V 15.93 A @ 381 V LINKING PARALLEL DC OUTPUT 1Cl2W 310XAC 320XAC 340XAC 360XAC Linked Units 2-3 Units, 1<l2W (L1 - N ) Voltage Line 0-420 V 5-420 V Power Ma # Units 2 1.8 KVA 3.6 KVA 7.2 KVA 10.8 KVA 3 2.7 KVA 5.4 KVA 10.8 KVA 16.2 KVA Ma Current 0-210 V L(2) 7.68 A @ 50 V - 210 V 15.36 A @ 50 V - 210 V 30.72 A @ 50 V -210 V 46.08 A @ 50 V - 210 V Line L(3) 11.52 A @ 50 V - 210 V 23.04 A @ 50 V - 210 V 46.08 A @ 50 V - 210 V 69.12 A @ 50 V - 210 V 0-420 V (2) 3.84 A @ 50 V - 420 V 7.68 A @ 50 V - 420 V 15.36 A @ 50 V - 420 V 23.04 A @ 50 V - 420 V (3) 5.76 A @ 50 V - 420 V 11.52 A @ 50 V - 420 V 23.04 A @ 50 V - 420 V 34.56 A @ 50 V - 420 V Page 5

MEASUREMENT (Total)* LINKING PARALLEL 1Cl2W 310XAC 320XAC 340XAC 360XAC Voltage Range 0.0-400.0 V ± (1% of reading + 2 counts) > 5 V ± (1% of reading + 5 counts) > 5 V Frequency Range 0.0-1000.0 z 0.1 z L ± 0.1 z @ 0.0-500 z ± 0.2 z @ 501-1000 z Current (rms) Range 2 0.00 A - 26.00 A 0.00 A - 52.00 A 0.00 A - 104.0 A 0.00 A - 156.0 A 3 0.00 A - 39.00 A 0.00 A - 78.00 A 0.00 A - 156.0 A 0.00 A - 234.0 A at 99.99 A, 0.1 A at 100.0 A ± (1.5% of reading +15 counts) # of Linked Units @ 40.0-70.0 z & Current > 1.0 A, or @ 70.01-500 z & Current > 5 A, or @ 501-1000 z & Current > 5 A & CF < 1.5 ± (1.5% of reading +15 counts) # of Linked Units @ 40.0-70.0 z & Current > 2.0 A, or @ 70.01-500 z & Current > 10 A, or @ 501-1000 z & Current > 10 A & CF < 1.5 ± (1.5% of reading +15 counts) # of Linked Units @ 40.0-70.0 z & Current > 3.0 A, or @ 70.01-500 z & Current > 15 A, or @ 501-1000 z & Current > 15 A & CF < 1.5 Power (W) Range 2 0 W - 2600 W 0 W - 25200 W 0 W -10400 W 0 W - 15600 W 3 0 W - 3900 W 0 W - 7800 W 0 W - 15600 W 0 W - 23400 W ± (2% of reading + 10 counts) (# of Linked Units) at PF 2 0.2, 40-500 z, and Current > 5.0 A ± (2% of reading + 10 counts) (# of Linked Units) at PF 2 0.3, 501-1000 z, and Current > 5.0 A Power Apparent (VA) Range 2 0 W - 2600 VA 0 W - 5200 VA 0 W -10400 VA 0 W - 15600 VA 3 0 W - 3900 VA 0 W - 7800 VA 0 W - 15600 VA 0 W - 23400 VA 1 VA V A, Calculated Value Power Reactive (Q) Range 2 0 W - 2600 VAR 0 W - 25200 VAR 0 W -10400 VAR 0 W - 15600 VAR 3 0 W - 3900 VAR 0 W - 7800 VAR 0 W - 15600 VAR 0 W - 23400 VAR 1 VAR --(VA)² - (W)², Calculated Value Power Factor Range 0-1.000 0.001 W / VA, Calculated and displayed to three significant digits Page 6

MEASUREMENT (Total)* LINKING POLY-PASE 1Cl3W 310XAC 320XAC 340XAC 360XAC Voltage Range 2 L1 Voltage + L2 Voltage L1 Voltage + L2 Voltage, Calculated and displayed to one significant digit Frequency Range 0.0-1000.0 z 0.1 z L ± 0.1 z @ 0.0-500 z ± 0.2 z @ 501-1000 z Current (rms) Range 2 (L1 Current + L2 Current)/2 L 0.001 A L ± (1% of reading + 5 counts) at 40-70 z, ± (1% of reading + 5 counts) at 70.1-500 z and output current (r.m.s) > 0.200A, ± (1% of reading + 5 counts) at 70.1-500 z and output current (r.m.s) > 0.300A ± (1% of reading + 5 counts) at 40-500 z, ± (1% of reading + 5 counts) at 501-1000 z & CF < 1.5, Power (W) Range 2 L1 Power + L2 Power ± (1% of reading + 5 counts) at 40-70 z, ± (1% of reading + 5 counts) at 70.1-500 z and output current (r.m.s) > 0.20A, ± (1% of reading + 5 counts) at 70.1-500 z and output current (r.m.s) > 0.30A & CF < 1.5 L 0. 2 L1 Power + L2 Power, Calculated Value Power Apparent (VA) Range 2 L1 VA + L2 VA L A 1 VA 2 L1 VA + L2 VA, Calculated Value Power Reactive (Q) Range 2 L1 VAR + L2 VAR 1 VAR 2 L1 VAR + L2 VAR, Calculated Value Power Factor Range 0-1.000 0.001 (L1 P + L2 P) / (L1 VA + L2 VA), Calculated and displayed to three significant digits Page 7

MEASUREMENT (Total)* LINKING POLY-PASE 3Cl4W 310XAC 320XAC 340XAC 360XAC Voltage Range (A+B+C)/3 (A+B+C)/3, Calculated and displayed to one significant digit Frequency Range 0.0-1000.0 z 0.1 z L ± 0.1 z @ 0.0-500 z ± 0.2 z @ 501-1000 z Current (rms) Range (A+B+C)/3 L 0.001 A L ± (1% of reading + 5 counts) at 40-70 z, ± (1% of reading + 5 counts) at 70.1-500 z and output current (r.m.s) > 0.200A, ± (1% of reading + 5 counts) at 70.1-500 z and output current (r.m.s) > 0.300A ± (1% of reading + 5 counts) at 40-500 z, ± (1% of reading + 5 counts) at 501-1000 z & CF < 1.5, Power (W) Range A Power + B Power + C Power ± (1% of reading + 5 counts) at 40-70 z, ± (1% of reading + 5 counts) at 70.1-500 z and output current (r.m.s) > 0.20A, ± (1% of reading + 5 counts) at 70.1-500 z and output current (r.m.s) > 0.30A & CF < 1.5 L 0. Calculated Value Power Apparent (VA) Range A VA + B VA + C VA L A 1 VA Calculated Value Power Reactive (Q) Range A VAR + B VAR + C VAR 1 VAR Calculated Value Power Factor Range 0-1.000 MEASUREMENT (Total)* 0.001 Sum P / Sum VA, Calculated and displayed to three significant digits LINKING PARALLEL DC 310XAC 320XAC 340XAC 360XAC Voltage Range 0.0-420.0 V ± (1% of reading + 2 counts) > 5 V ± (1% of reading + 5 counts) > 5 V Current Range 2 0.05 A - 26.00 A 0.05 A - 52.00 A 0.05 A - 104.00 A 0.05 A - 156.00 A 3 0.05 A - 39.00 A 0.05 A - 78.00 A 0.05 A - 156.00 A 0.05 A - 234.00 A ± (1% of reading + 5 counts) # of Linked Units Power (W) Range 2 0 W - 2600 W 0 W - 25200 W 0 W -10400 W 0 W - 15600 W Key L = Low Limit Range = igh Limit Range L (2) = Low Limit Range 2 Units Linked L (3) = Low Limit Range 3 Units Linked 3 0 W - 3900 W 0 W - 7800 W 0 W - 15600 W 0 W - 23400 W (2 ) = igh Limit Range 2 Units Linked (3) = igh Limit Range 3 Units Linked 2 = 2 Units Linked 3 = 3 Units Linked ± (2% of reading + 5 counts) # of Linked Units Page 8