EasyclickPro. Wireless Control Systems Making light work

EasyclickPro Wireless Control Systems Making light work

EasyclickPro EasyclickPro RF system The new Easyclick generation Honeywell Easyclick wireless and battery-less solutions for lighting, shutter and room temperature control can help deliver cost saving installations for energy efficient and flexible buildings. Save time and money Faster wire-free installation Increase flexibility Reposition wireless switches and sensors quickly and easily Guaranteed reliability Enocean standard wireless protocol with years of proven market experience Bi-directional signal confirmation Bi-directional flush mounting receiver The Easyclick deluxe handheld transmitter is a user friendly remote control for both Easyclick and all other receivers based on EnOcean technology. Wall mounted transmitters Easyclick deluxe handheld transmitter 2

EasyclickPro wireless control systems Attributes and advantages Cost savings with boosted radio ranges: The receivers feature preinstalled repeater functions that can be activated when needed (Level 1 and Level 2) Compatibility: The new EnOcean standard protocols (EEP) make the receivers futureproof for reliable returns on investments Greater convenience and energy efficiency: A large number of functions and parameters can be selected e.g. for the remote switches: 2-key standard function, 1-key function, ON/OFF switch, stairwell functions with selectable OFF times and advance OFF warning, automatic OFF after selectable times, fan function with delayed ON and automatic OFF, four lighting scenes, window contacts, window handles, movement detector, and brightness sensor Product safety: All new Easyclick receivers have been certified under KEMA Optimised power supply and bistable relays minimise own power consumption (< 0.5 W) A function can be assigned individually to each programmed transmitter Separate preassigned functions and parameters for simple sensor assignments when e.g. window contacts, window handles, and movement detectors are being programmed Application: Listed building Create wiring flexibility in a listed building; adding switches adding luminaires or creating scene setting. Use the wireless and battery-less switches which can be fitted to any wall without breaking the skin of the building, connect the flush-mount receivers into the ceiling rose and create wireless flexibility in the space without the time and expense of running cable. Application: Offices with flexible use of the space Easyclick switches and receivers are ideal for flexible use spaces, the wireless switches can even be fitted to glass partitions or furniture. 3

EasyclickPro Application: Quick energy saving solutions Easily retrofit wireless and battery-less PIRs into rooms and offices, use the door or window contact to automatically switch off heating if the window is opened. Application: Advanced energy saving solutions in hotel rooms Use the DIN rail mounted solution in conjunction with the key-card switch, window contact and wireless temperature sensor to create an optimum energy efficient solution without impacting guest comfort. Add bedside switches or dimmers to the solution to create a comfortable lighting installation. Application: Add a wireless extension to an MLS system Overcome difficult installation situations or quickly extend the Ex-Or solution by adding a wireless extension to an MLS or CD box installation using the CDWWLC card for the CDW12U5. 4

EasyclickPro wireless control systems Easyclick wall mounted transmitters are batteryless and maintenance free. Their pushed keys supply them with energy. The Easyclick RF system transmits on the European harmonised frequency of 868.3 MHz. This frequency may be used only by products that transmit solely 1% or 36 seconds per hour. This helps to reduce the risk of interference to a minimum. Modulation type: ASK (amplitude shift keying). The range between transmitter and receiver is about 30 m in a building when the signals pass through two masonry walls. Depending on the design, up to 32 transmitters can be programmed for one receiver. The device is screwed or glued to the wall, and can supplement an existing flush mounting combination without the need for a flush mounting socket. Easyclick wall mounted transmitter, neutral, 2-channel w/o combination frame, rocker with centre, no print, H = 15 mm Pure White 1 00030313 Aluminium 1 00060313 Easyclick wall mounted transmitter, neutral, 4-channel w/o combination frame, double rockers with centre, no print, H = 15 mm Pure White 1 00030613 Aluminium 1 00060613 Combination frames For vertical and horizontal installation 1-gang, dimensions 83 x 83mm Pure White Aluminium 10 10 00020111 00050111 Easyclick window contact Batteryless radio window/door contact for monitoring window and door statuses with Easyclick radio signals sent to Easyclick Plus receivers, bi-directional, and radio interfaces for building management systems. The Easyclick window contact is wireless and perfectly maintenance free with internal solar powered energy storage. It can operate for several days in the dark. Immediate signal transmission when a window is opened or closed, triggered by a window magnet. The window contact can be installed on all frame profiles. Owing to the wireless radio transmission, these window contacts can be retrofitted at any time for enhanced security. Compatible with Easyclick Plus receivers. Colour similar to RAL 9003, IP 40 rating. Charge for several hours in daylight before operating. Window contact measurements: L 110 x W 19 x H 15 mm Magnet measurements: L 23 x W 14 x H 6 mm Pure White 1 00367113 Easyclick hotel card switch Self supplying switch for taking hotel cards and switching the power supply per room. Batteryless and maintenance free Easyclick transmitter for Easyclick Plus receivers, bi-directional, and radio interfaces for building management systems, for screwed or glued surface installations, for standard hotel card size 55 x 85 mm Pure White Aluminium 1 1 00381856 00382046 5

EasyclickPro Easyclick mini handheld transmitter, 4-channel The Easyclick mini handheld transmitter is designed to dim lights, open and close shutters, and adjust blinds. It can operate batteryless at any location within the range. For instance, it is possible to open an electric gate or activate a welcome scene. The small and ergonomic mini handheld transmitter in the sealed housing features four buttons for remote control. Two-button operation makes use of the pairs A/B and C/D. Housing colour black, button colour grey, weight approx 50 g, measurements: W 50 mm x L 82 mm x H 21 mm Black/Grey 1 00364113 Easyclick deluxe handheld transmitter, 128-channel The bi-directional Easyclick deluxe handheld transmitter is a user friendly remote control for both Easyclick and all other receivers based on EnOcean technology. The Easyclick deluxe handheld transmitter is therefore ideal for switching/ dimming lights, regulating blinds/shutters/canopies, and actuating many other electrical consumers. In addition, the device provides the fitter with EnOcean service functions for planning ranges and can also test the functions during initial operations. Included in delivery: 3 AAA NiMH rechargeable batteries with USB charger and separate USB cable. 128 bi-directional radio channels with up to 512 functions 32 configurable levels Time of day, date, and temperature in C or F Predefined texts and symbols PIN code lock possible 32 programmable timers 8 configurable shortcut keys The handheld transmitter can be used to configure all levels with the listed entries The software is enhanced and updated by internet downloads The software can configure up to 32 user functions, e.g. lighting scenes, with up to 16 actions EnOcean service functions e.g. ID view, radio signal quality, radio link test, etc., test the range between two Easyclick deluxe handheld transmitters Black 1 00364936 Measurements: 165 x 55 x 21 mm EasyclickPro aerial module The bi-directional Easyclick aerial module receives all signals from Easyclick transmitters and repeaters inside its range. These are then rerouted via an RS485 interface to the Easyclick modules. The Easyclick modules are linked to each other with modular plug-in cables. Up to 128 modules can be connected to the RS485 bus. If required, more than one aerial module can also be connected to the Easyclick modular system. Fitted with a white cover, the plastic housing is ready for surface mounting on a wall or ceiling. Connecting terminals for the RS485 bus IP 20 rating, 868.3 MHz Own standby consumption approx 0.4 W, operation approx 22 ma /0.5 W Housing measurements dia approx 130 mm, H approx 29 mm 1 00377816 6

EasyclickPro wireless control systems EasyclickPro switching module with SPV, 4-channel, 4 HP The Easyclick switching module receives its signals via the external Easyclick aerial module and uses its power sections to implement the configured functions and parameters. The Easyclick switching module unit is fitted with its own voltage supply and can therefore be linked with modular plug-in cables to additional Easyclick modules e.g. dimming, JR, etc. An additional Easyclick voltage supply module is available for further enhancements. The Easyclick switching module is used to switch lights and other electrical appliances based on a range of functions and parameters configured at rotary switches. The four channels can be programmed independently of each other, and a function can be defined individually for each programmed transmitter. Standard function: 2-key ON/OFF function. The functions selected can be e.g. 1-key function, time functions, fan control, window contact, lighting scene control, hotel card switch, time controlled power shutoff, temperature control, etc. 1 00377836 DRA device for mounting on 72 mm DIN rails (4 HP) own consumption standby = less than 1 W operation = max 100 ma / 2.4 W 4 relay outputs 10 A Rotary switches for functions and parameters LRN/CLR button LED display incl voltage supply 230 V AC/24 V DC modular bushes connecting terminals for the RS485 bus (aerial) incl 30 cm connecting cable IP 20 rating CE approvals, KEMA/KEUR EasyclickPro module SPV, 2 HP The Easyclick module SPV 24 V is designed for supplying voltage to the Easyclick modular system. The Easyclick modules are linked to each other with modular plug-in cables. With connecting terminals for the aerial module D 450 ANT. DRA device for mounting on 36 mm DIN rails (2 HP) own consumption standby approx 0.5 W voltage supply approx 220 240 Vac Output voltage 24 Vdc Output current 1.5 A Screw type terminals for power connection (N, L) connecting terminals for the RS485 bus (aerial) Modular bushes IP 20 rating CE approvals, KEMA/KEUR 1 00377957 EasyclickPro switching module, 4-channel, 2 HP The Easyclick switching module receives its signals via the external Easyclick aerial module and uses its power sections to implement the configured functions and parameters. The Easyclick modules are linked to each other with modular plug-in cables. The Easyclick switching module is used to switch lights and other electrical consumers based on a range of functions and parameters configured at rotary switches. The four channels can be programmed independently of each other, and a function can be defined individually for each programmed transmitter. Standard function: 2-key ON/OFF function. The functions selected can be e.g. 1-key function, time functions, fan control, window contact, lighting scene control, hotel card switch, time controlled power shutoff, temperature control, etc. 1 00377856 DRA device for mounting on 36 mm DIN rails (2 HP) own consumption standby = approx 0.25 W operation = approx 70 ma / 1.7 W 4 relay outputs 10 A rotary switches for functions and parameters. Modular bushes, LRN/CLR button, LED display incl 30 cm connecting cable IP 20 rating CE approvals, KEMA/KEUR 7

EasyclickPro EasyclickPro switching module, 2-channel, 2 HP The Easyclick switching module receives its signals via the external Easyclick aerial module and uses its power sections to implement the configured functions and parameters. The Easyclick modules are linked to each other with modular plug-in cables. The Easyclick switching module is used to switch lights and other electrical appliances based on a range of functions and parameters configured at rotary switches. The two channels can be programmed independently of each other, and a function can be defined individually for each programmed transmitter. Standard function: 2-key ON/OFF function. The functions selected can be e.g. 1-key function, time functions, fan control, window contact, lighting scene control, hotel card switch, time controlled power shutoff, temperature control, etc. 1 00324873 DRA device for mounting on 36 mm DIN rails (2 HP) own consumption standby = approx 0.25 W operation = approx 46 ma / 1.1 W 2 relay outputs 16 A rotary switches for functions and parameters. Modular bushes, LRN/CLR button, LED display incl 30 cm connecting cable IP 20 rating CE approvals, KEMA/KEUR EasyclickPro UNI dimming module, 1-channel, 2 HP The Easyclick UNI dimming module receives its signals via the external Easyclick aerial module and uses its power sections to implement the configured functions and parameters. The Easyclick modules are linked to each other with modular plug-in cables. The Easyclick UNI dimming module is used to switch and dim lights based on a range of functions and parameters configured at rotary switches. A function can be defined individually for each programmed transmitter. Standard function: 2-key ON/OFF/DIM function with memory. Selected functions include e.g. 2-key function with brightness preset, 1-key function with memory, time functions, lighting scene control, etc. DRA device for mounting on 36 mm DIN rails (2 HP) own consumption standby = approx 0.29 W operation = approx 20 ma / 0.48 W universal dimmer with 1 channel for R, L, and C loads. Min load 15 W and 20 VA, max 250 W and 200 VA, dimmable 230 Vac LED lamps e.g. Phillips type Master LEDbulb MV 12 W (please also consult list on internet) rotary switches for functions and parameters. LRN/CLR key, LED display, modular bushes incl 30 cm connecting cable IP 20 rating CE approvals, KEMA/KEUR 1 00377876 EasyclickPro JR module, 4-channel, 2 HP (for 2 blinds/shutters) The Easyclick JR module receives its signals via the external Easyclick aerial module and uses its power sections to implement the configured functions and parameters. The Easyclick modules are linked to each other with modular plug-in cables. The Easyclick JR module is used to regulate blinds/shutters based on a range of functions and parameters configured at rotary switches. A function can be defined individually for each programmed transmitter. Standard function: UP/STOP/DOWN with slat adjust. Selected functions include e.g. UP/STOP/DOWN w/o slat adjust, slat adjust ON/OFF, safety function for blocking, UP/ DOWN lighting scenes, etc. 1 00377937 DRA device for mounting on 36 mm DIN rails (2 HP) own consumption standby = approx 0.4 W operation = approx 21 ma / 0.51 W 4 relay outputs for two 230 Vac motor blinds/ shutters (max 1 A) rotary switches for functions and parameters LRN/CLR button LED display Modular bushes incl 30 cm connecting cable IP 20 rating CE approvals, KEMA/KEUR 8

EasyclickPro wireless control systems Easyclick dimming receiver Plus, 1-channel Easyclick receiver for switching and dimming lights based on a range of functions and parameters. Trailing edge dimmer for low voltage halogen lamps with electronic transformers, incandescent lamps, high voltage halogen lamps, and other ohmic consumers. Standard function: ON/OFF/DIM with 2-key function with memory Selected functions include: ON/OFF/DIM with 2-key function w/o memory, ON/OFF defined with 2-key function, UP/ DOWN/DIM defined with 2-key function, ON/OFF/DIM with 1-key function and memory, stairwell light function with selectable OFF time and advance OFF warning, 4 lighting scenes saved and retrieved at the push of a key (1 lighting scene per key). A function can be defined individually for each programmed transmitter. Connecting data: min 60 to max 210 W, housing height 27 mm, with screw hook hole, IP 20, with connecting wires, 230 Vac, 50 Hz, neutral conductor required. Up to 32 transmitters can be programmed. CE approvals, KEMA/KEUR 1 00363913 Easyclick room temperature sensor with solar energy storage For recording temperatures and adjusting local setpoints in individual rooms, with integrated temperature sensor and rotary knob for setpoint adjusts; the batteryless room temperature sensor transmits the measured values to the receiver item no. 00312296 Temperature recording: Setpoint recording: Range 0 to +40 C Resolution 0.15 K Absolute precision typ. ±0.4 K Range 0 270 angle of rotation Resolution 1.1 Pure White Aluminium 1 1 00313696 00313896 Energy generator: Solar cell, internal EDLC, maintenance free Rating: IP 20 according to EN 60529 Ambient temperature: -25 to 65 C Transport: -25 to 65 C / max 70 %rh, noncondensing Minimum illuminance: 200 lux (min 3 4 hours daily) Surface: Matt Easyclick room temperature sensor with solar energy storage With switchover for 2 temperature ranges (day/night), for recording temperatures and adjusting local setpoints in individual rooms, with integrated temperature sensor and rotary knob for setpoint adjusts; the batteryless room temperature sensor transmits the measured values to the receiver item no. 00312296 Temperature recording: Setpoint recording: Range 0 to +40 C Resolution 0.15 K Absolute precision typ. ±0.4 K Range 0 270 angle of rotation Resolution 1.1 Pure White Aluminium 1 1 00313996 00314296 Energy generator: Solar cell, internal EDLC, maintenance free Rating: IP 20 according to EN 60529 Ambient temperature: -25 to 65 C Transport: -25 to 65 C / max 70 %rh, noncondensing Minimum illuminance: 200 lux (min 3 4 hours daily) Surface: Matt 9

EasyclickPro Easyclick thermostat receiver For flush mounting, living space function for regulating heating temperature ON/OFF: The receiver compares the room temperature transmitted by the room temperature sensor with the entered setpoint. A smaller value switches the relay ON, a higher value OFF (thermostat function). The relay output can be used directly to actuate 230 Vac thermal two-point valves. The energy lock function can be used for up to 10 programmed window contacts. When the window is closed, the receiver switches the actuator to OFF. Supply voltage: 230 Vac, 50 Hz Switching output: Changeover contact, max 2500 W Screw type terminals: Max 1.5 mm² Rating: IP 20 according to EN 60529 Installation: In flush mounting socket with blank cover and cable outlet Housing height: 28 mm Red 1 00312296 EasyclickPro ceiling mounted movement detector The wireless Easyclick ceiling mounted movement detector is supplied with energy from solar cells and detects movements via a 360 passive infrared sensor. The movement detector is easy to install and saves energy. For instance, lighting switches ON automatically when a person enters a room, and automatically OFF after a follow-up time when they leave again. In this process, the movement detector transmits radio signals to the parameterisable Easyclick receivers or all EnOcean interfaces for the building management systems. Battery operation (CR2032) is possible when the ambient brightness falls below 50 lux. Transmit frequency: EnOcean 868.3 MHz Detection range: approx 12 m dia. Installation height: 2 3 m Transmit range: approx 25 m Minimum brightness: 50 lux for automatic ON/OFF Energy generator: Solar cell, internal EDLC Charging startup time: Programming = approx 4 min at 100 lux = approx 1.5 min at 200 lux Transmit movement = approx 6 min at 100 lux = approx 3.5 min at 200 lux For test mode = approx 5.5 hours at 200 lux Full charging time: 9 hours at 200 lux Charging times for operation: 3 hours during the day at 200 lux Operating time in the dark: approx 48 hours Battery operation: approx 1 year depending on switching frequency Transmit interval: Immediately on movement detection variably every 60 s at 300 lux to 300 s at 50 lux OFF every 10 and 30 min after the last movement EnOcean equipment profile: EEP A5-07-01 Housing: PC, pearl white, similar to RAL 1013 Rating: IP 50 Measurements: 160 mm x 60 mm x 37 mm Weight: 125g Ambient conditions: Installation only in buildings, -10 C to 40 C, 20% to 95% relative air humidity, noncondensing Suitable receivers: All bi-directional dimming receivers and remote switches 00377876 (from FW1.25). A separate light sensor can be installed for lighting control based on daylight exposure 1 00317316 10

EasyclickPro wireless control systems EasyclickPro wall mounted movement detector The wireless Easyclick wall mounted movement detector is supplied with energy from solar cells and detects movements via a passive infrared sensor. The movement detector is easy to install and saves energy. For instance, lighting switches ON automatically when a person enters a room, and automatically OFF after a follow-up time when they leave again. In this process, the movement detector transmits radio signals to the parameterisable Easyclick receivers or all EnOcean interfaces for the building management systems. Battery operation (CR2032) is possible when the ambient brightness falls below 50 lux. The wide angle lens fitted as standard can be replaced easily with a provided long distance lens. Transmit frequency: EnOcean 868.3 MHz Detection range: Wide angle lens approx 120, 1 m to approx 15 m depending on room depth, long distance lens approx 45, up to approx 30 m depending on room depth Installation height: 1.8 2.4 m Transmit range: approx 25 m Minimum brightness: 50 lux for automatic ON/OFF Energy generator: Solar cell, internal EDLC Charging startup time: Programming = approx 4 min at 100 lux = approx 1.5 min at 200 lux Transmit movement = approx 6 min at 100 lux For test mode = approx 3.5 min at 200 lux = approx 5.5 hours at 200 lux 1 00317416 Full charging time: 9 hours at 200 lux Charging times for operation: 3 hours during the day at 200 lux Operating time in the dark: approx 48 hours Battery operation: approx 1 year depending on switching frequency Transmit interval: Immediately on movement detection variably every 60 s at 300 lux to 300 s at 50 lux OFF every 10 and 30 min after the last movement EnOcean equipment profile: EEP A5-07-01 Housing: PC, pearl white, similar to RAL 1013 Rating: IP 50 Measurements: 148 mm x 64 mm x 45.7 mm Weight: 125 g Ambient conditions: Installation only in buildings, -10 C to 40 C, 20% to 95% relative air humidity, noncondensing Suitable receivers: All bi-directional dimming receivers and remote switches 00377876 (from FW1.25). A separate light sensor can be installed for lighting control based on daylight exposure EasyclickPro wall mounted transmitter, 2-channel EnOcean RF push button Combinations with: PLS products with EnOcean logo IP 66 rating Measurements: 95 x 95 x 57 mm (L x W x H) Grey 1 00989706 EasyclickPro wall mounted transmitter, 2-channel EnOcean RF push button Combinations with: PLS products with EnOcean logo IP 66 rating Measurements: 95 x 95 x 57 mm (L x W x H) White 1 00989716 11

EasyclickPro EasyclickPro wall mounted transmitter, 4-channel EnOcean RF push button Combinations with: PLS products with EnOcean logo IP 66 rating Measurements: 95 x 95 x 57 mm (L x W x H) Grey 1 00989726 EasyclickPro wall mounted transmitter, 4-channel EnOcean RF push button Combinations with: PLS products with EnOcean logo IP 66 rating Measurements: 95 x 95 x 57 mm (L x W x H) White 1 00989736 EasyclickPro flush mounting receiver, bi-directional, 1-channel The bi-directional Easyclick receiver can not only receive radio signals, but also transmits back its status every time it changes. Actual ON/OFF switched states can then be visualised e.g. on the handheld transmitter 00364936 (from FW 2.0). The handheld transmitter also supports remote management for remote access and the subsequent auto programming of transmitters. The Easyclick receiver serves to switch lights and other appliances. A range of functions and parameters can be selected: Two-key operation ON/OFF (standard function) One-key operation ON/OFF (changeover) Button operation (pulse) Hotel card switch with definable follow-up time Stairwell light with selectable running time and shutdown warning Automatic OFF after selectable running time Fan function with delayed ON and selectable follow-up time Save and retrieve 4 lighting scenes at the press of a key (one lighting scene per key) Window handle and window contact, visualisation also parallel to the switching outputs Movement detector and light sensor A function can be defined individually for each of the max 32 programmed transmitters Integrated repeater functions (1 level / 2 level) can be switched ON for each project, irrespectively of the set functions Separate preassigned functions and parameters when e.g. window contacts, window handles, and movement detectors are being programmed White 1 00364316 Own consumption: < 0.5 W (bistable relay) Transmit frequency: 868.3 MHz Voltage supply: 100 240 Vac/ 50 60 Hz Neutral conductor: required Ambient temperature: -20 C to +40 C Storage temperature: -40 C to +85 C Plug-in terminals: max 1 x 1.5 mm 2 Housing height: 28 mm Rating: IP 20 Mounting lugs: for screwing down in switch sockets Approvals: CE; KEMA/KEUR Load types 230V ac 110 Vac Incandescent lamps 2500 W 1250 W HV halogen lamps 1200 W 600 W Motor load 600 VA 300 VA EVG load 3 pcs (1) 3 pcs (1) 1) The quantity depends on the type and manufacturer. 12

EasyclickPro wireless control systems EasyclickPro receiver, bi-directional, 1-channel The bi-directional Easyclick receiver can not only receive radio signals, but also transmits back its status every time it changes. Actual ON/OFF switched states can then be visualised e.g. on the handheld transmitter 00364936 (from FW 2.0). The handheld transmitter also supports remote management for remote access and the subsequent auto programming of transmitters without the need to press the LRN button on the receiver. The Easyclick receiver serves to switch lights and other appliances. A range of functions and parameters can be selected: Two-key operation ON/OFF (standard function) One-key operation ON/OFF (changeover) Button operation (pulse) Hotel card switch with definable follow-up time Stairwell light with selectable running time and shutdown warning Automatic OFF after selectable running time Fan function with delayed ON and with selectable follow-up time Save and retrieve 4 lighting scenes at the press of a key (one lighting scene per key) Window handle and window contact, visualisation also parallel to the switching outputs Movement detector and light sensor A function can be defined individually for each of the max 32 programmed transmitters Integrated repeater functions (1 level / 2 level) can be switched ON for each project, irrespectively of the set functions Separate preassigned functions and parameters when e.g. window contacts, window handles, and movement detectors are being programmed 1 00364376 Own consumption: < 0.5 W (bistable relay) Transmit frequency: 868.3 MHz Voltage supply: 100 240 Vac/ 50 60 Hz Neutral conductor: required Ambient temperature: -20 C to +40 C Storage temperature: -40 C to +85 C Connecting wires: 1.5 mm² blue, black, brown Housing height: 28 mm Housing: with screw hook hole Rating: IP 20 Approvals: CE; KEMA/KEUR Load types 230V ac 110 Vac Incandescent lamps 2500 W 1250 W HV halogen lamps 1200 W 600 W Motor load 600 VA 300 VA EVG load 3 pcs (1) 3 pcs (1) 1) The quantity depends on the type and manufacturer. 13

EasyclickPro EasyclickPro flush mounting receiver, bi-directional, 1-channel with floating contact The bi-directional Easyclick receiver can not only receive radio signals, but also transmits back its status every time it changes. Actual ON/OFF switched states can then be visualised e.g. on the handheld transmitter 00364936 (from FW 2.0). The handheld transmitter also supports remote management for remote access and the subsequent auto programming of transmitters without the need to press the LRN button on the receiver. The Easyclick receiver with floating contact serves to switch lights and other electrical appliances. A range of functions and parameters can be selected: Two-key operation ON/OFF (standard function) Button operation (pulse) Hotel card switch with definable follow-up time Stairwell light with selectable running time and shutdown warning Automatic OFF after selectable running time Fan function with delayed ON and with selectable follow-up time Save and retrieve 4 lighting scenes at the press of a key (one lighting scene per key) Window handle and window contact, visualisation also parallel to the switching outputs Movement detector and light sensor A function can be defined individually for each of the max 32 programmed transmitters Integrated repeater functions (1 level / 2 level) can be switched ON for each project, irrespectively of the set functions Separate preassigned functions and parameters when e.g. window contacts, window handles, and movement detectors are being programmed 1 00364476 Own consumption: < 0.5 W (bistable relay) Transmit frequency: 868.3 MHz Voltage supply: 100 240 Vac/ 50 60 Hz Neutral conductor: required Ambient temperature: -20 C to +40 C Storage temperature: -40 C to +85 C Plugin terminals: max 1 x 1.5 mm ² Housing height: 28 mm Rating: IP 20 Mounting lugs: for screwing down in switch sockets Approvals: CE; KEMA/KEUR Load types 230V ac 110 Vac 30 Vac Incandescent lamps 1200 W 600 W 150 W HV halogen lamps 600 W 300 W 75 W 14

EasyclickPro wireless control systems EasyclickPro flush mounting receiver, bi-directional, 2-channel The bi-directional Easyclick receiver can not only receive radio signals, but also transmits back its status every time it changes. Actual ON/OFF switched states can then be visualised e.g. on the handheld transmitter 00364936 (from FW 2.0). The handheld transmitter also supports remote management for remote access and the subsequent auto programming of transmitters without the need to press the LRN button on the receiver. The Easyclick receiver serves to switch lights and other appliances. A range of functions and parameters can be selected: Two-key operation (standard function ON/OFF) One-key operation (ON/OFF changeover) Button operation (pulse) Hotel card switch with definable follow-up time Stairwell light with selectable running time and shutdown warning Automatic OFF after selectable running time Fan function with delayed ON and with selectable follow-up time Save and retrieve 4 lighting scenes at the press of a key (one lighting scene per key) Window handle and window contact, visualisation also parallel to the switching outputs Movement detector and light sensor A function can be defined individually for each of the max 32 programmed transmitters The channels can be programmed independently of each other. Integrated repeater functions (1 level / 2 level) can be switched ON for each project, irrespectively of the set functions Separate preassigned functions and parameters when e.g. window contacts, window handles, and movement detectors are being programmed 1 00364336 Own consumption: < 0.5 W (bistable relays) Transmit frequency: 868.3 MHz Voltage supply: 100 240 Vac/ 50 60 Hz Neutral conductor: required Ambient temperature: -20 C to +40 C Storage temperature: -40 C to +85 C Plugin terminals: max 1 x 1.5 mm ² Housing height: 28 mm Rating: IP 20 Mounting lugs: for screwing down in switch sockets Approvals: CE; KEMA/KEUR Load types 230V ac 110 Vac Incandescent lamps 500 W 250 W HV halogen lamps 100 W 50 W Motor load 100 VA 50 VA EVG load 1 pcs (1) 1 pcs (1) 1) The quantity depends on the type and manufacturer. 15

EasyclickPro EasyclickPro flush mounting JR receiver, bi-directional, 2-channel The bi-directional Easyclick JR receiver can not only receive radio signals, but also transmits back its status every time it changes. For instance, the top/bottom end position of a shutter/blind can be depicted as a virtual image and visualised e.g. on the handheld transmitter 00364936 (from FW 2.0). The handheld transmitter also supports remote management for remote access and the subsequent auto programming of transmitters without the need to press the LRN button on the receiver. The Easyclick receiver is designed to regulate shutters and blinds. A range of functions and parameters can be selected: Two-key operation UP/STOP/DOWN with slat adjust (standard function blind) Two-key operation UP/STOP/DOWN w/o slat adjust (standard function shutter) Jog mode (ON/OFF) One-key operation UP/STOP/DOWN Safety lock for maintenance work Automatic ON/OFF Sun sensor / twilight sensor / wind sensor / rain sensor 4 possible positions TOP/BOTTOM for lighting scenes Lockout protection with window contact / window handle A function can be defined individually for each of the max 32 programmed transmitters Integrated repeater functions (1 level / 2 level) can be switched ON for each project, irrespectively of the set functions Separate preassigned functions and parameters when e.g. window contacts and window handles are being programmed 1 00364356 Own consumption: < 0.5 W (bistable relays) Transmit frequency: 868.3 MHz Voltage supply: 100 240 Vac/ 50 60 Hz Neutral conductor: required Ambient temperature: -20 C to +40 C Storage temperature: -40 C to +85 C Plugin terminals: max 1 x 1.5 mm ² Housing height: 28 mm Rating: IP 20 Mounting lugs: for screwing down in switch sockets Approvals: CE; KEMA/KEUR Connecting data: I max 1.0 A 16

EasyclickPro wireless control systems PRODUCT DESCRIPTION INTERMEDIATE VARIANTS COLOUR PACKED PART NO. EasyclickPro plug through switch, bi-directional, 1-channel with energy meter The bi-directional Easyclick plug through receiver can not only receive radio signals, but also transmits back its status every time it changes. Actual ON/ OFF switched states can then be visualised e.g. on the handheld transmitter 00364936 (from FW 2.0). An integrated energy meter (energy measuring chip) also records the energy values of the appliance. The momentary power consumption, the operating hours, and the overall electricity consumption can be visualised e.g. on the handheld transmitter 00364936 (from FW 128). In addition, the energy consumption can be depicted as a histogram on an hourly or weekly basis, together with the total consumption and the total costs. The handheld transmitter also supports remote management for remote access and the subsequent auto programming of transmitters without the need to press the LRN button on the receiver. The Easyclick receiver serves to switch lights and other appliances. A range of functions and parameters can be selected: Two-key operation ON/OFF (standard function) One-key operation ON/OFF (changeover) Button operation (pulse) Hotel card switch with definable follow-up time Stairwell light with selectable running time and shutdown warning Automatic OFF after selectable running time Fan function with delayed ON and with selectable follow-up time Save and retrieve 4 lighting scenes at the press of a key (one lighting scene per key) Window handle and window contact, visualisation also parallel to the switching outputs Movement detector and light sensor A function can be defined individually for each of the max 32 programmed transmitters With manual ON/OFF key Integrated repeater functions (1 level / 2 level) can be switched ON for each project, irrespectively of the set functions Separate preassigned functions and parameters when e.g. window contacts, window handles, and movement detectors are being programmed Complying with British standards Pure White 1 00364656 Own consumption standby: < 0.5 W (bistable relay) Transmit frequency: 868.3 MHz Voltage supply: 100 240 Vac/ 50 60 Hz Neutral conductor: required Ambient temperature: -20 C to +40 C Storage temperature: -40 C to +85 C Housing measurements: 136 x 65 x 39 mm Rating: IP 20 Approvals: CE; KEMA/KEUR Load types 230V ac 110 Vac Incandescent lamps 2500 W 1250 W HV halogen lamps 1200 W 600 W Motor load 600 VA 300 VA EVG load 3 pcs (1) 3 pcs (1) 1) The quantity depends on the type and manufacturer. 17

EasyclickPro Notes 18

EasyclickPro wireless control systems Notes 19

Honeywell Ex-Or Albery House, Springfield Road, Horsham, West Sussex RH12 2PQ, UK Customer Service Tel +44 (0)1942 719229 Fax +44 (0)1942 508753 E-mail enquiries.ex-or@honeywell.com Technical Tel +44 (0)1942 719229 Fax +44 (0)1942 508753 E-mail technicalsales.ex-or@honeywell.com www.ex-or.com Reference UKEX-028-1214-EN December 2014 2014 Honeywell International Inc.