page 1 of 5 06 / 2007 / HS WARICORNER Cabinet dimensions Widths O.D. : 900 mm Depth min. I.D. : 480 mm Height min. I.D. : 530 mm patent protected Specifications Fittings: Colors: full extension RAL 9006 silver Installation measurements Height I.D.: WACO 2 530 mm (4 baskets) Basket dimensions Saphir and Scalea basket basket basket width depth height Front basket 450 305 75 Cabinet basket 430 370 75 Load capacity of baskets: Front baskets: 5 kg (12 lbs.) Rear baskets: 12.5 kg (28 lbs.) Baskets: Saphir: chrome Scalea: maple/ral 9006 silver E-Z-Close Damping System standard 1 2 3 W D H Saphir basket Scalea basket (left hand unit shown) We reserve the right to change and/or improve the technical specifications without notice. For the most current technical information please call us.
page 2 of 5 Faceframe WARICORNER 39 in. (991mm) min. 45 in. (1143mm) *R = Mirror Image min. 6 in. (152mm) min. 4 (1067mm) 48 in. (1219mm) min. 41/ (114mm) Frameless WARICORNER 36 in. (914mm) 8 in. (203mm) 39 in. (991mm) 61/ (165mm) 4 (1067mm) 5 in. (127mm) min. min. min. 45 in. (1143mm) 31/ (89mm) min. *R = Mirror Image
page 3 of 5 1 installation Screw bottom guide to bottom panel 418 mm from cabinet front edge and 28 mm from left cabinet side panel (right with right-hand layout) with 10 screws. 28 "Left cabinet side 418 max. 68 2 installation Screw lateral guide to cabinet side panel 2mm from cabinet front edge with 7 screws. Cabinet front edge 2 3 Basket bracket installation in bottom guide Insert basket bracket centrally through cut-outs in the bottom guide. Ensure that rollers run in the guides! Cabinet front edge Bottom Top "Left cabinet side Basket bracket Bottom panel (left hand unit shown)
page 4 of 5 4 Pull-out part installation Push Plastic Connerctors into top and bottom holes of the lateral guide. Insert the pull-out part at a slight angle into the upper flange connector of the lateral guide, ensuring that the rear guide roller runs in the guide. Now straighten the pull-out part and push into the lower flange connector of the lateral guide. To secure, press in the cover cap with integrated safety clip under the Top flange connector. Plastic connectors Cover cap with safety clip connector connector Pull-out part 5 Scissor hinge installation Detach plastic insert and euro screw firstly before trying to locate scissor hinge onto guide roller. Push the scissor hinge onto the guide roller and screw to basket bracket and pull-out part with screws provided. es Panhead threaded screws M5 x 12 connector Important for opening restriction: Subsequently, insert the plastic part in the scissor hinge and screw in with the Euro screws supplied. Fixing materials: Plastic part Euro screws 6.3 x 11 Safety clip
page 5 of 5 6 If there are drilled holes for hinges on the inside of the front panel use the plastic Caps to fill these holes (do not use the plastic caps of the cabinet or frontpanel). Depending on front width 375/425/525 (not supplied) order separately If necessary drill and screw the adapter plate directly into the plastic cap. Plastic caps are not supplied with the item and must be ordered separately. 7 Door installation Drill and screw adapter plate onto door as shown on adjacent diagram. Fixing materials: Panhead screws 4.0 x 20 or Euro screws 6.3 x 15 8 Door adjustment Untighten fastening screws 1+2 to laterally adjust the front. Use screws 3+4 to correct any left- or right-hand front misalignments. Turn the screws to the left to move the front towards the cabinet, turn them to the right to move the front away from the cabinet. Then retighten screws 1+2 firmly. 9 Setting door opening angle The opening angle of the door is set by loosening screw A. Now move plastic part to B or C and re-tighten. z 336 A B C Door WariCorner 2 X = 22,5 mm + door overlap Z = 106 mm + door overlap Basket x Scissor hinge Door A B C door strike side 1 b a 3 4 2 Panhead screws 4.0 x 20 or Euro screws 6.3 x 15 10 Mounting the baskets Fix the larger baskets to the basket bracket with the basket clips. Fix the smaller baskets to the pull-out part with the basket clips. Basket clips Basket Vauth-Sagel Systemtechnik Neue Straße 27 D-33034 Brakel-Erkeln Telefon: +49 5272 601-01 Fax: +49 5272 601-193 Internet: www.vauth-sagel.de Fulterer USA 542 Townsend Avenue High Point, NC 27263 Tele 1 336 431 4646 Fax 1 336 431 4620 www.fultererusa.com