1/6 AA5G/AA60G -Input, 5-Watt Mixer Amplifier with Global Power Supply 01 Atlas Sound LP. The Atlas Circle A, Soundolier, and Atlas Sound are trademarks of Atlas Sound L.P. IED is a Registered Trademark of Innovative Electronic Designs LLC. All rights reserved. All other Trademarks are property of their respective owners. No endorsement is implied. Due to continual product development, specifications are subject to change without notice. ATS0054 RevA /1 Features AA5G - Three inputs (each with a front panel volume control) and a single output channel AA60G - Four inputs (each with a front panel volume control) and a single output channel Ideal For Paging, Background Music, and Music-On-Hold Applications Balanced Mic/Line Input, Zone, And Dual Rca Stereo Music Inputs Priority Muting by VOX Or External Switch Bass And Treble Controls On Master Output Secondary Zone Output 1 W & 600Ω / MOH Universal AC Power Supply For Use 110V - 40V Systems 0V, 100V, or Ω Amplifier Output Signal Presence LED Indicators Applications The AtlasIED AA5G/AA60G is the perfect choice for distributed business paging and background music (BGM) systems, small to medium speech privacy systems, and in applications where music on hold (MOH) plus paging is required. General Description The AA5G/AA60G is a three/four input channel mixer amplifier designed for distributed business paging and background music (BGM) systems, small to medium speech privacy systems, and in applications where music on hold (MOH) plus paging is required. With one microphone input and two stereo line inputs, the AA5G/ AA60G will accommodate a variety of input sources including paging microphones, CD players, and digital music receivers. A dip switch selectable matrix allows the creation of a Zone mix from any or all of the input sources for music or messaging on hold applications. 0.V, 100V, and Ω outputs are provided. The output power of 5-watts will match nicely with FAP, SM, SD, and GD series loudspeakers. In fact, in an 11' ceiling application, the AA5G will provide power for up to 11 SDW loudspeakers tapped at.5- watts each while providing upwards of 4dB in the direct sound field at ear height. TELEPHONE: (00) 6- FAX (00) 65-45
/6 01 Atlas Sound LP. The Atlas Circle A, Soundolier, and Atlas Sound are trademarks of Atlas Sound L.P. IED is a Registered Trademark of Innovative Electronic Designs LLC. All rights reserved. All other Trademarks are property of their respective owners. No endorsement is implied. Due to continual product development, specifications are subject to change without notice. ATS0054 RevA /1 System AA5G AA60G Type 5-Watt Mixer Amplifier 60-Watt Mixer Amplifier Power Supply Type Global Switch Mode Global Switch Mode Amp Topology Class AB Class AB Number of Fixed Inputs 4 Accessory Inputs DSP Internal Network Optional Accessory Card Slot Output Power (Note 1) 100V 5-Watts 60-Watts 0V 5-Watts 60-Watts Ω 5-Watts 60-Watts Front Panel Power Switch Push Type Push Type Indicators Output Signal, Clip, Power Signal, Clip, Power Indicators Input Signal Signal Output Limiter PHD Test Circuit Level Controls Master, Inputs 1- Master, Inputs 1-4 EQ Output Bass EQ Output Treble Mic/Line/Aux Inputs Input Quantity 4 Mic/Line (Balanced, Position PHX Type. mm Pitch) 1 1 Aux RCA (Unbalanced RCA L & R Sum) Aux.5mm (Unbalanced.5mm L & R Sum) Speciality Inputs Line Input Balacnced (Balanced Phoenix position,.5mm Pitch) Line Input Unbalacnced (RCA) Room Combine - Bridge Buss In/ Out (Line Level Balanced Phoenix 5 position,.5mm Pitch) Amp IN (Balanced Phoenix position,.5mm Pitch) Input Mute VOX (Input 1 Activated) (Assignable Inputs, VOX Threshold Senstivity Priority / Remote Mute: (Assignable Inputs, Contact Clouser ( Position Phoenix) Remote Level Type (External Varible Resistance 10k Ohm - 0 Ohm) Connector ( Position Phoenix.5mm Pitch) Asignment (Input 6 or Master, Dip Switch Selection) TELEPHONE: (00) 6- FAX (00) 65-45
/6 01 Atlas Sound LP. The Atlas Circle A, Soundolier, and Atlas Sound are trademarks of Atlas Sound L.P. IED is a Registered Trademark of Innovative Electronic Designs LLC. All rights reserved. All other Trademarks are property of their respective owners. No endorsement is implied. Due to continual product development, specifications are subject to change without notice. ATS0054 RevA /1 Outputs Main (Class Wire Rated) Transformer Coupled Taps Main Output Termination (Barrier Strip Screw Terminal) Zone 1 W Ohm with Level Control ( Position PHX 5.0mm Pitch) Zone Balanced / MOH with Level Control (600Ω, Max 1.0V Out, Position PHX 5.0mm Pitch) Pre Out (Balanced, V Max, Pre Master Level Control) Control Switch Functions Ω, 0.V, 100V Ω, 0.V, 100V Zone (Assignable) Mute Receive (Assignable) Phantom Power (4V) Mic/Line Select (Inputs 1,,, 4) Input 1 Input 1 Remote Level Assignment (Input 6 or Master Level) Lo Cut Filter (400Hz Hi-Pass Filter, By-passes Bass EQ) Technical Data Frequency Response (LF +/- db, HF +/- 1dB) THD+N (0.5% or Less, at 1kHz, Rated Output) Input Impedance (Mic & Line Balanced 100Ω, Unbalanced 10kΩ) Signal To Noise Ratio Mic Mode Line Mode.5mm L & R Unbalanced Summed RCA Unbalanced L & R Summed Mic Balanced Line.5mm L & R Unbalanced Summed RCA Unbalanced L & R Summed mv 00mV 400mV 5dB 5dB Phantom Power (Mic Mode) 4V 4V EQ Power Requirements Output Bass Output Treble DSP ±6dB @ 100Hz ±6dB @ 10kHz AC Mains Operating Range (100V - 40v 50 / 60 Hz) AC Cord (IEC to NEMA 5-0P, M, 1-Gauge,) mv 00mV 400mV 5dB 5dB ±6dB @ 100Hz ±6dB @ 10kHz Idle Power (Amps, Watts, BTU) 0.1A, 11W, BTU 0.A, 16W, 54 BTU Average Power - Note (Amps, Watts, BTU) 0.5A, 54W, 14 BTU 1.09A, 1W, 6 BTU Max Power - Note 1 (Amps, Watts, BTU) 1.15A, 90W, 0 BTU 1.6A, 11W, 446 BTU Cooling APD Standby, Active Idle Convection Cooled Convection Cooled In Use Convection Cooled Convection Cooled Cooling Air Flow Direction TELEPHONE: (00) 6- FAX (00) 65-45
4/6 01 Atlas Sound LP. The Atlas Circle A, Soundolier, and Atlas Sound are trademarks of Atlas Sound L.P. IED is a Registered Trademark of Innovative Electronic Designs LLC. All rights reserved. All other Trademarks are property of their respective owners. No endorsement is implied. Due to continual product development, specifications are subject to change without notice. ATS0054 RevA /1 Mechanical Chassis Finish Unit Height.5" (90mm).5 (90mm) Unit Width.5" (10mm).5" (10mm) Unit Depth 1.5" (11mm) 1.5" (11mm) With with Rack Kit (Optional) Unit Weight. lbs (. kg) 9. lbs (4. kg) Agency Approvals RoHS Compliant Safety Listings CB FCC Dimensions and Weight AC Power Requirements Rack Mount Requirements AAGRMK Rack Mount Kit (RU) AAGRMK Rack Mount Kit (RU) Dimensions - Unit 15.5" W x 6.5" H x 10.5" D (9mm x 11mm x mm) 15.5" W x 6.5" H x 10.5" D (9mm x 11mm x mm) Dimensions - Shipping Weight - Unit 11 lbs (4.9kg) 1 lbs (5.6 kg) Weight - Shipping NOTES: 1. Power level measurment is define as follows: 1Hz Sine wave signal 1 second at 1% THD+N. If the amplifier specifies ohm load, a 4 ohm load can be applied but will deliver the the power rating of ohm. If driven past this power rating the amplifier will go into protect.. Average Power is defined as Pink Noise input signal applied to achieve 1/ of the 4 Ohm or 0.V power rating. 4. Max Power is defined as 1 KHz input signal applied to achieve the maxium power output before clipping into a 4 Ohm or 0.V load. 5. BTU is calcualed by the AC Mains Power consumed minus the total power output measured at the specified load and condition, multiplied by.41. Example: 5 Watts from the AC Source - 600 Watts Total Output power = 15 x.41 = 61 BTU TELEPHONE: (00) 6- FAX (00) 65-45
SPI + Bass Clip + Treble WARNING: SHOCK HAZARD - DO NOT OPEN AVIS: RISQUE DE CHOC ELÉCTRIQUE - NE PAS OUVRIR WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE AVIS: NE PAS EXPOSER CE MATÉRIEL À LA PLUIE OU L HUMIDITE AFIN DE REDUIRE LE RISQUE D INFLAMMATION OU DE CHOC ELÉCTRIQUE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. () This device must accept any interference received, including interference that may cause undesired operation. CONFORMS TO UL STD. 60065 CERTIFIED TO CSA STD. C. No. 60065 5/6 Dimensional Drawings.5 AA5G Professional Mixer Amplifier 01 Atlas Sound LP. The Atlas Circle A, Soundolier, and Atlas Sound are trademarks of Atlas Sound L.P. IED is a Registered Trademark of Innovative Electronic Designs LLC. All rights reserved. All other Trademarks are property of their respective owners. No endorsement is implied. Due to continual product development, specifications are subject to change without notice. ATS0054 RevA /1 9 4.5 5 6 FRONT AA5G Professional Mixer Amplifier Power Master.50 11.65.5 1 1601 Jack McKay Blvd. Ennis, TX 5119 00.6. SPI Clip Master + + Bass Treble FRONT.5 1.5 SIDE 11901 Power TELEPHONE: (00) 6- FAX (00) 65-45
6/6 Architect and Engineer Specifications 01 Atlas Sound LP. The Atlas Circle A, Soundolier, and Atlas Sound are trademarks of Atlas Sound L.P. IED is a Registered Trademark of Innovative Electronic Designs LLC. All rights reserved. All other Trademarks are property of their respective owners. No endorsement is implied. Due to continual product development, specifications are subject to change without notice. ATS0054 RevA /1 The mixer/amplifier shall control and mix up to three input signals and deliver an audio output of 5-watts into Ω, 0.V, and 100V or 60-watts into Ω, 0.V, and 100V. The amplifier output shall be transformer isolated with a frequency response 50Hz 0kHz (-1dB) with less than 0.5% THD at rated output. The output regulation shall be less than db, no load to full load. It shall be capable of operation from a 110V to 40VAC, 50/60Hz line. The mixer/amplifier shall be convection cooled. The amplifier shall have thermal and short circuit protection. The mixer/amplifier shall have a switch selectable MIC/TEL balanced input to accept either low impedance microphone or Tel/Line Level signals with -60 dbv sensitivity. The MIC/TEL input shall include a Phoenix (Euro Block) type connector. The MIC/TEL input impedance shall be 600Ω. The MIC/TEL input shall include an auto mute (VOX Mute) sensitivity control for Input 1. The MUTE SENSE control will allow threshold adjustment of mute activation. The mixer/amplifier shall include two stereo summing (AA5G) and three (AA60G) auxiliary inputs, unbalanced, -10dBv, with dual-rca jacks. The auxiliary input impedance shall each be 10kΩ. The mixer/amplifier shall include a Zone output, a 1-watt at Ω output, and transformer isolated 600Ω output with a maximum level of 1.5VRMS. The mixer/amplifier Zone output shall be assignable from any of the inputs via the rear panel dipswitch. The Zone output shall have one rear panel mounted rotary level control for both outputs. The mixer/amplifier shall incorporate rear panel terminals via Phoenix connector for the REMOTE MUTE function, controlled by an external switch closure. A rear panel dipswitch shall allow assignment of Input and/or Input to respond to the mute function activation. The Mute assignment shall not affect the Zone output. The front panel shall include Inputs 1,, (AA5G) and 4 (AA60G level controls. Input Signal, Output Signal, Clip and Power LEDs shall also be incorporated. The mixer/amplifier front panel shall also include bass and treble tone controls (100Hz and 10kHz, ±10dB). The tone controls shall not affect the Zone output. The mixer/amplifier front panel shall include an AC Mains power switch. A rear panel AC receptacle (un-switched) shall be included for connection of external equipment. Dimensions (W x H x D) shall be.5" x.5" x 1.5" (10mm x 9mm x 11mm) with feet and knobs or.5" (90mm) H without feet. Net weight shall be.lbs. (.kg). Front panel finish and material shall be black ABS resin and case finish (and material) shall be black powder coated sheet steel. TELEPHONE: (00) 6- FAX (00) 65-45