INSERTION LOSS (db) Ceramic Bandpass Filter 50Ω Applications Harmonic Rejection Transmitters / Receivers WiFi / WLAN 5150 to 5990 MHz Features Low loss<2.0 db typ. Rejection up to 16 GHz Small size (79 x49 x37 ) Temperature stable Hermetically sealed LTCC construction Specification Definition DC F3 F1 F2 F4 Functional Schematic F5 Pass Band Stop Band, Lower Stop Band, Upper Maximum Ratings Electrical Specifications at 25 C +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Parameter F# Min. Typ. Max. Unit Center Frequency 5600 MHz Insertion Loss F1 - F2 5150-5990 1.2 2.2 db VSWR F1 - F2 5150-5990 1.6 :1 Insertion Loss DC - F3 DC - 40 25 db VSWR DC - F3 DC - 40 30 :1 Insertion Loss F4 - F5 9310-15750 db VSWR F4 - F5 9310-15750 40 :1 Operating Temperature -40 C to +85 C Storage Temperature* -55 C to +100 C RF Power Input** 0.5W at 25 C *12 months max. **Passband rating, derate linearly to 0.125W at 85 C ambient Permanent damage may occur if any of these limits are exceeded. CASE STYLE: GE0805C3 Available Tape and Reel at no extra cost Reel Size Devices/Reel 7, 50, 100, 0, 500,1000, 3000 0 INSERTION LOSS (Full Band) INSERTION LOSS (Pass Band) INSERTION LOSS (db) 40 60 80 0 4000 8000 100 16000 INSERTION LOSS (db) 0.5 1.5 2.0 2.5 5150 53 5490 5660 5830 6000 1.8 VSWR GROUP DELAY VSWR 1.6 1.4 1.2 GROUP DELAY (nsec) 0.8 0.6 0.4 0.2 Pad Connections Input 1 Output 3 Ground 2,4 5150 53 5490 5660 5830 6000 5150 53 5490 5660 5830 6000 Mini-Circuits www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com REV. A M151107 ED-15034 WZ/CP/AM 150601 Page 1 of 2
Bandpass Filter Frequency (MHz) Full Band Performance Insertion Loss (db) VSWR (:1) Frequency (MHz) Pass Band Performance Insertion Loss (db) Group Delay (nsec) 100 59.09 174.29 5150 1.44 0.65 500 45.49 110.80 52 1.28 0.55 1000 39.81 95.13 5250 1.23 0.52 2510 34.76 86.40 53 1.15 0.47 30 36.65 78.27 5360 1.12 0.43 40 28.90 32.67 5390 1.10 0.42 4840 9.06 5.90 5460 6 0.39 5150 1.44 6 5500 4 0.38 5990 1.27 1.70 5530 3 0.37 6470 3.13 3.83 5600 3 0.35 8030 16.59 46.23 5640 2 0.35 9310 26.63 386.49 5670 3 0.33 10300 35.24 61.58 5710 3 0.33 11500 59.35 109.64 5850 1.10 0.32 15750 27.00 45.89 5990 1.27 0.31 Pad Connections Input 1 Output 3 Ground 2,4 Outline Drawing PCB Land Pattern Demo Board MCL P/N: TB-703+ Suggested PCB Layout (PL-397) Suggested Layout, Tolerance to be within ±.002 inch Outline Dimensions ( mm ) A B C D E F G H J.079.049.037.014.051.010.134.055.051 2.01 1.24 0.94 0.36 1.30 0.25 3.40 1.40 0 K L M N P Q R wt.110.032.039.014.014.012.039 grams 2.80 0.81 0.99 0.36 0.36 0.30 0.99.0 Additional Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms ); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at www.minicircuits.com/mclstore/terms.jsp Mini-Circuits www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 2 of 2
Ceramic Bandpass Filter Typical Performance Data FREQUENCY INSERTION LOSS RETURN LOSS FREQUENCY GROUP DELAY (MHz) (db) (db) (MHz) (ns) 10 59.09 0.10 5 50 45.49 0.16 50 4 100 39.81 0.18 100 3 111 39.01 0.18 111 3 123 38.23 0.18 123 3 129 37.88 0.18 129 5 141 37.24 0.18 141 3 153 36.69 0.18 153 4 165 36.23 0.19 165 3 171 36.01 0.19 171 2 180 35.71 0.19 180 3 192 35.36 0. 192 3 4 35.08 0.21 4 4 210 34.99 0.21 210 3 219 34.87 0.21 219 4 224 34.82 0.21 224 3 230 34.75 0. 230 3 241 34.73 0. 241 4 251 34.76 0. 251 4 253 34.78 0. 253 4 255 34.80 0. 255 4 260 34.86 0. 260 4 274 35.17 0.21 274 5 302 36.65 0.22 302 5 386 36.74 0.38 386 3 400 32.65 0.42 400 0.10 4 28.90 0.53 4 0.15 436 27.93 0.65 436 0.18 468 23.14 1.25 468 8 484 9.06 2.97 484 0.88 500 2.72 10.68 500 0.97 515 1.44 30.72 515 0.65 522 1.28 26.61 522 0.55 532 1.15 22.25 532 0.47 543 8.64 543 0.41 546 6.28 546 0.39 550 4 19.71 550 0.38 553 3 19.25 553 0.37 557 3 18.69 557 0.36 560 3 18.27 560 0.35 564 2 17.64 564 0.35 567 3 17.07 567 0.33 571 3 16.39 571 0.33 574 4 16.00 574 0.33 578 6 15.45 578 0.33 581 7 14.97 581 0.32 585 1.10 14.25 585 0.32 5875.0 1.13 13.76 5875.0 0.32 599 1.27 11.72 599 0.31 611 1.52 9.56 611 0.30 623 1.90 7.60 623 0.30 635 2.45 5.96 635 0.28 647 3.13 4.64 647 0.27 675 5.22 2.58 675 0.22 707 8.07 1.55 707 0.16 739 10.98 0.86 739 0.12 771 13.85 0.53 771 9 803 16.59 0.38 803 6 835 19.11 0.28 835 5 867 21.63 0.16 867 5 899 24.12 0.14 899 5 931 26.63 4 931 3 963 29.26 5 963 2 995 32.04 0.10 995 2 1030 35.24 0.28 1030 2 1050 37.34 0.22 1050 2 1100 45.55 7 1070 2 1150 59.35 0.16 1080 4 1575 27.00 0.38 1575 5 REV. OR 8/28/14 Page 1 of 1
Group Delay (ns) Group Delay (ns) Return Loss (db) Return Loss (db) Insertion Loss (db) Insertion Loss (db) Ceramic Bandpass Filter Typical Performance Curves 80 Insertion Loss (Full Band) 2.5 Insertion Loss (Pass Band) 70 60 2.0 50 40 30 1.5 10 0.5 0 0 00 4000 6000 8000 10000 100 14000 16000 5100 50 5300 5400 5500 5600 5700 5800 5900 6000 40 Return Loss 40 Return Loss 35 35 30 30 25 15 10 5 0 0 00 4000 6000 8000 10000 100 14000 16000 25 15 10 5 0 5100 50 5300 5400 5500 5600 5700 5800 5900 6000 1.4 Group Delay 1.4 Group Delay 1.2 1.2 0.8 0.8 0.6 0.6 0.4 0.4 0.2 0.2 0 00 4000 6000 8000 10000 100 14000 16000 5100 50 5300 5400 5500 5600 5700 5800 5900 6000 REV. OR 8/28/14 Page 1 of 1
Case Style Outline Dimensions GE GE0805C-3 PCB Land Pattern Suggested Layout, Tolerance to be within.002 CASE # A B C D E F G H J K L GE0805C-3.079 (2.00).049 (1.25).037 (0.95).014 (0.35).051 (1.30).010 (0.25).134 (3.40).055 (1.40).051 (1.30).110 (2.80).032 (0.80) CASE # M N P Q R WT. GRAM GE0805C-3.039 (0).014 (0.35).014 (0.35).012 (0.30).039 (0) Dimensions are in inches (mm). Tolerances: 2Pl. +.01; 3 Pl. +.005.0 Notes: 1. Open style, ceramic base. 2. Termination finish: For RoHS Case Styles: Tin plate over Nickel plate. All models, (+) suffix. For RoHS-5 Case Styles: Tin-Lead plate over Nickel plate. All models, no (+) suffix. 98-GE Rev.: P (02/01/17) M159567 File: 98-GE Sheet 5 of 13 This document and its contents are the property of Mini-Circuits.
Tape & Reel Packaging TR-F114 Tape Width, mm Device Cavity Pitch, mm Reel Size, inches 8 4 7 Devices per Reel Small quantity standards (see note) 50 100 0 500 1000 Standard 4000 Note: Please Consult individual model data sheet to determine device per reel availability. Mini-Circuits carrier tape materials provide protection from ESD (Electro-Static Discharge) during handling and transportation. Tapes are static dissipative and comply with industry standards EIA-481/EIA-541. Go to: www.minicircuits.com/pages/pdfs/tape.pdf 98-TR-F114 Rev.: OR (10/02/14) M148375 File: 98-TR-F114.doc Sheet 1 of 1 This document and its contents are the property of Mini-Circuits.
Mini-Circuits Environmental Specifications ENV28T5 All Mini-Circuits products are manufactured under exacting quality assurance and control standards, and are capable of meeting published specifications after being subjected to any or all of the following physical and environmental test. Specification Test/Inspection Condition Reference/Spec Operating Temperature -40 to 85 C Individual Model Data Sheet Storage Temperature -55 to 100 C Ambient Environment Individual Model Data Sheet Barometric Pressure 100,000 Feet MIL-STD-2, Method 105, Condition D Humidity 90% RH, 65 C Units may require bake-out after humidity to restore full performance. MIL-STD-2, Method 103 Thermal Shock -65 to 125 C, 5 cycles MIL-STD-2, Method 107, Condition B Vibration (High Frequency) g peak, 10-00 Hz, 12 times in each of three perpendicular directions (total 36) MIL-STD-2, Method 4, Condition D Mechanical Shock 100g, 6ms sawtooth, 3 shocks each direction 3 axes (total 18) MIL-STD-2, Method 213, Condition I ENV28T5 Rev: A 09/26/13 M143494 File: ENV28T5.pdf This document and its contents are the property of Mini-Circuits. Page: 1