TRANS-LUX PTS-9200, PTS-9400, PTS-9600, and PTS-9800 STRETCHERS TRANS-LUX STRETCHERS Maintenance - Parts Read and understand all of the instructions and safety information in Owners Operation Manual before maintenance. MAN_0005 2017 Bryton Corporation 2017
TABLE OF CONTENTS 8-1 Caster & Fifth Wheel Assembly 3 8-2 Brake Rod Assembly 4 8-3 Side Control Litter Up/Down Assembly 5 8-4 Hydraulic Assembly (PTS-9200, PTS-9400, and PTS-9600) 6-7 8-5 Electric Up/Down Litter Control Assembly (PTS-9800 Electric Model) 8-9 8-6 Electric Up/Down Litter Control Assembly (PTS-9800 Electric Model) 10-11 8-7 Litter Assembly with Knee Gatch 12-13 8-8 Litter Assembly 14-15 Preventative Maintenance Record 16-17 TRANS-LUX 9600 TRAUMA TRANS-LUX 9400 EMERGENCY TRANS-LUX 9200 TRANSPORT TRANS-LUX 9800 ELECTRIC MAN_0005 2 www.brytoncorp.com
8-1 Caster & Fifth Wheel Assembly RF R8 R7 R2 B6 R11 R6 See DETAIL B Fig 8-1 P See DETAIL A Q QQ L QT DETAIL A L RR P Q QQ Item Part No. Part Name Qty. BF 350-05-99 Base Frame 1 B2 350-03-02 Skate Board 1 B6 350-03-28 Bushing 2 B7 350-03-27 Bushing 2 B8 350-03-39 Ground Chain 1 L 350-03-12 Lever 4 P 350-02-46 Hole Plug 4 Q 350-03-50 Hex Screw 4 QQ 350-03-56 Hex Head, Cap Screw 6 QT 350-02-56 Thin Head, Cap Screw 2 R6 350-05-21 Hex Head, Cap Screw 1 R11 350-05-26 5" Wheel 1 RR 350-03-38 8" Wheel Assy 4 QQ DETAIL B RR MAN_0005 3 www.brytoncorp.com
8-2 Brake Rod Assembly L L J K Support Weldment Base Frame R1 T Support Weldment M Support Weldment B7 T2 T1 Fig 8-2 M1 M2 II I Item Part No. Part Name Qty. B7 350-03-27 Bushing 2 I 350-03-69 Brake Pedal 2 II 350-03-49 Slotted Spring Pin 2 J 350-03-10 Brake Bar A 2 K 350-03-11 Brake Bar B 2 L 350-03-12 Lever 4 M 350-03-13 Control Arm 2 M1 350-02-41 Screw, Control Arm Set 2 M2 350-03-91 Slotted Spring Pin 2 R1 350-05-16 Support Bracket 1 T 350-03-35 Brake Rod 1 T1 Open Hole 2 T2 350-03-16 Sleeve 2 T3 350-03-68 Washer, PE 2 MAN_0005 4 www.brytoncorp.com
8-3 Side Control Litter Up/Down Assembly R F BF B6 F1 G BF D S L2 Y L D2 W2 N2 N6 D1 BF W1 E H1 N5 N1 Z X H Fig 8-3 BF Item Part No. Part Name Qty. B6 350-03-28 Bushing, self lubricating 2 BF 350-05-99 Base Frame 1 D 350-03-04 Piston Link Welding 1 D1 350-03-51 Hex hd, Cap Screw 1 D2 350-03-52 Hex hd, Cap Screw 1 E 350-03-05 Up Pedal Rod 1 F 350-03-06 Mounting Bracket 1 F1 350-03-21 Bushing, self lubricating 2 G 350-03-07 Pedal Shaft 1 G1 350-03-36 Clasper 2 H 350-03-34 Fwd/Aft Down Pedal Rod 2 H2 350-03-42 Fwd/Aft Down Pedal 2 H1 350-03-46 Up Pedal 2 K 350-03-75 Bracket 1 L 350-03-76 Bracket 1 M 350-03-77 Support Plate 1 N5 350-03-57 Hex hd, Cap Screw 1 N6 350-03-58 Hex hd, Cap Screw 1 R 350-03-37 Slotting 2 V 350-03-22 Spring 1 W1 350-03-31 Release Rod A 1 W2 350-03-32 Release Rod b 1 Z 350-03-70 Bracket 1 MAN_0005 5 www.brytoncorp.com
8-4 Hydraulic Assembly (PTS-9200-9400-9600 Only) H H1 H2 F H2 A B H4 H4 B D D L1 L E M U U G1 G M G Fi g 8-4 MAN_0005 6 www.brytoncorp.com
Item Part No. Part Name Qty. A 350-02-01 Litter Support Bracket 2 B 350-02-02 Lock support 2 D 350-02-04 Cylinder cover 2 E 350-02-05 Base hood 1 F 350-02-06 Support plate 2 G 350-02-07 Hydraulic pump 2 G1 350-02-10 Internal wrenching screw 8 H 350-02-08 Internal wrenching screw 2 H2 223+06-25 Internal wrenching screw 4 H4 212+06-15 Pan head, cap screw 4 L 350-01-25 The Movable IV Pole 1 L1 350-01-27 I.V, Pole rest 2 M 350-02-11 Shape support 2 U 350-02-12 Shape support 2 MAN_0005 7 www.brytoncorp.com
8-5 Electric Up/Down Litter Control Assembly (Electric Models Only) Maintenance Parts Guide H Open Hole A C H Open Hole B D K K1 E E M E1 B8 E1 M1 Fig 8-5 MAN_0005 8 www.brytoncorp.com
Item Part No. Part Name Qty. A 480-02-01 Litter support bracket (head end) 1 B 480-02-02 Litter support bracket (foot end) 1 B8 480-03-39 Ground Chain 1 C 480-02-06 Support plate 2 D 480-02-05 Base hood 1 E 480-02-16 Actuator 2 E1 480-02-28 Screw for Actuator to hat section 12 H 480-02-09 Screw 8 K 480-01-25 The Movable IV Pole 1 K1 480-01-27 The Plastic Anchor for The IV Pole 2 M 480-02-18 hat section 2 M1 480-02-29 Screw for hat section to Base frame 16 MAN_0005 9 www.brytoncorp.com
8-6 Electric Up/Down Litter Control Assembly (Electric Models Only) Maintenance Parts Guide T A1 GG S F D1 M5 MA M6 E3 E2 E1 Z B1 B2 N6 N1 N3 N2 C2 M4 M3 M2 F2 C3 F1 OA J1 P1 N5 N4 P J Z M1 P H H2 H H2 G1 U Q2 QA U2 U3 Q1 M V P1 R Q3 NOTE: MA, OA & QA are Optional Accessories Fig 8-6 M1 MAN_0005 10 www.brytoncorp.com
Item Part No. Part Name Qty. A1 350-01-02 Mattress 1 B1 350-01-04 The Frame of The Backrest Section 1 B2 350-01-05 Handle cover 2 C2 350-01-07 The Frame of Thigh Section 1 C3 350-01-08 The Frame of The Shank Section 1 D1 350-01-10 The Frame of The Backrest Section 1 E1 350-01-12 The Board of The Abdominal Section 1 E2 350-01-13 The Board of The Thigh Section 1 E3 350-01-14 The Board of The Shank Section 1 F 350-01-15 The snubber for The backrest 2 F1 350-01-16 The snubber for The Knee Crooked 2 F2 350-02-16 The Adjusted Bar for The shank 2 GG 350-01-18 The Handle control for The Backrest Board (F) 1 G1 350-01-19 The Handle control for The Knee Crooked (F1) 1 J 350-01-24 The Permanent IV Pole 1 J1 350-01-26 The Plastic Anchor for The IV Pole 1 K 350-01-22 Folding The Push Bar 2 K1 350-01-23 The Plastic Anchor for The folding push bar 2 M 350-01-20 Foot Auxiliary Push Bar 1 MA 350-01-28 The Instrument Tray Assembly 1 M1 350-01-21 Foot Auxiliary Push Bar [Instrument Tray use] 1 M2 350-01-30 The Frame of The Instrument 1 M3 350-01-31 The Magnetic Strip 2 M4 350-01-32 The Steel Slice 2 M5 350-01-33 The Swing Bolster 2 M6 350-01-29 The Translucent 1 NA 350-01-34 The X-Ray Cassette Holder Assembly 1 N1 350-01-35 The X-Ray Frame 1 N2 350-01-36 The X-Ray cassette Tray 1 N3 350-01-37 The Cape of The Frame 4 N4 350-01-38 The Screw for Fixing The Plastic Toggle 4 N5 350-01-39 The Plastic Toggle 4 N6 350-01-40 The Screws for Fixed 2 OA 350-01-41 The Oxygen Tank Holder 1 P1 350-01-42 The Rectangle Plastic Cover 4 P 350-01-43 The Round Plastic Cover 2 QA 350-01-70 The case history Tray Assembly 1 R 350-01-44 The Protected Bumper Assembly 4 S 350-01-46 The Plastic Anchor for The Siderails 2 T 350-01-47 The Collapsible Siderails 2 U 350-01-49 The Protective Strip 2 U2 350-02-77 CE plate 1 U3 350-02-79 bar code 1 V 350-01-75 Electronic health scale Assembly 1 Z 350-04-95 Litter Base Frame 1 MAN_0005 11 www.brytoncorp.com
8-7 Litter Assembly with Knee Gatch WA T2 A G B E1 F MA E3 E2 B1 B2 M5 M6 C2 M 4 M3 C3 Z J1 P1 J P M2 F1 M1 P3 H H2 H H2 Z1 OA Z2 T3 T5 T1 S V P2 R M NOTE: MA, OA & WA are Optional Accessories Fig 8-7 MAN_0005 12 www.brytoncorp.com
Item Part No. Part Name Qty. A 350-01-01 Mattress 1 B 350-01-09 The Board of The Backrest Section 1 B1 350-01-03 The frame of The Backrest Section 1 B2 350-01-05 Handle cover 2 C2 350-01-07 The frame of thigh section 1 C3 350-01-08 The frame of the shank section 1 E1 350-01-12 The Board of the abdominal section 1 E2 350-01-13 The Board of The Thigh Section 1 E3 350-01-14 The Board of The Shank Section 1 F 350-01-15 The snubber for The backrest 2 F1 350-01-16 The snubber for The Knee Crooked 2 G 350-01-17 The Adjusted Bar for The Backrest Board 1 H 350-02-08 Internal wrenching screw 2 H2 223+06-25 Internal wrenching screw 4 H4 212+06-15 Pan head, cap screw 4 J 350-01-24 The Permanent IV Pole 1 J1 350-01-26 The Plastic Anchor for The IV Pole 1 M 350-01-20 Foot Auxiliary Push Bar [no Instrument Tray use] 1 MA 350-01-28 The Instrument Tray Assembly 1 M1 350-01-21 Foot Auxiliary Push Bar [Instrument Tray use] 1 M2 350-01-30 The Frame of The Instrument 1 M3 350-01-31 The Magnetic Strip 2 M4 350-01-32 The Steel Slice 2 M5 350-01-33 The Swing Bolster 2 M6 350-01-29 The Translucent 1 OA 350-01-41 The Oxygen Tank Holder 1 P 350-01-22 Folding The Push Bar 2 P1 350-01-23 The Plastic Anchor for The folding push bar 2 P2 350-01-42 The Rectangle Plastic Cover 2 P3 350-01-43 The Round Plastic Cover 2 R 350-01-44g The Protected Bumpers (color ; gray) 4 S 350-01-46 The Anchor for The Siderails 2 T1 350-03-47 The Collapsible Siderail [LH] 1 T2 350-03-48 The Collapsible Siderail [RH] 1 T5 223+08-35 Internal wrenching screw 20 V 350-01-50 The Crank for E200i (for Knee Crooked ) 1 WA 350-01-52 The Board of The Head Section 1 Z 350-04-93 Litter Base Frame 1 MAN_0005 13 www.brytoncorp.com
8-8 Litter Assembly WA T2 A G B F MA E B1 B2 M5 M6 M4 M3 J1 P1 J P M2 Z ZA M1 P3 H1 H2 H H2 Z1 OA Z2 T3 T5 T1 U2 S U3 P2 R M NOTE: MA, OA, WA & ZA are Optional Accessories Fig 8-8 CR MAN_0005 14 www.brytoncorp.com
Item Part No. Part Name Qty. A 350-01-01 Mattress 1 B 350-01-09 The Board of The Backrest Section 1 B1 350-01-03 The frame of The Backrest Section 1 B2 350-01-05 Handle cover 2 E 350-01-11 The Board of The Abdominal Section 1 F 350-01-15 The snubber for The backrest 2 G 350-01-17 The Adjusted Bar for The Backrest Board 1 H 223+10-35 Internal wrenching screw (AFT) 1 H1 226+10-35 Hex head, cap screw (FWD) 1 H2 223+06-25 Internal wrenching screw 4 H4 212+06-15 Pan head, cap screw 4 J 350-01-24 The Permanent IV Pole 1 J1 350-01-26 The Plastic Anchor for The IV Pole 1 M 350-01-20 Foot Auxiliary Push Bar [no Instrument Tray use] 1 MA 350-01-28 The Instrument Tray Assembly 1 OA 350-01-41 The Oxygen Tank Holder 1 P 350-01-22 Folding The Push Bar 2 P1 350-01-23 The Plastic Anchor for The folding push bar 2 P2 350-01-42 The Rectangle Plastic Cover 2 P3 350-01-43 The Round Plastic Cover 2 R 350-01-44r The Protected Bumper Assembly (color : red) 4 S 350-01-46 The Anchor for The Siderails 2 T1 350-03-47 The Collapsible Siderail [LH] 1 T2 350-03-48 The Collapsible Siderail [RH] 1 T3 350-03-49 L The Bracket for Siderail 5 T4 350-03-49 R The Bracket for Siderail 5 T5 223+08-35 Internal wrenching screw 20 U2 350-02-79 Bar code 1 U3 350-02-77 CE plate 1 WA 350-01-52 The Board of The Head Section Assembly 1 Z 350-03-92 Litter Base Frame 1 Z1 350-01-77 L rack 1 Z2 350-01-78 U rack 1 ZA 350-01-79 M rack (Optional) 1 MAN_0005 15 www.brytoncorp.com
Preventative Maintenance Record For your convenience, here is a simple chart to use to note which personnel have been trained to safely use and maintain the Trans-Lux Stretcher. Personnel Trained Daily Operation Safety Instruction Cleaning Procedures Date of Weekly Inspection Date of Monthly Inspection Date of Semi-Annual Testing MAN_0005 16 www.brytoncorp.com
Preventative Maintenance Record For your convenience, here is a simple chart to use to note which personnel have been trained to safely use and maintain the Trans-Lux Stretcher. Personnel Trained Daily Operation Safety Instruction Cleaning Procedures Date of Weekly Inspection Date of Monthly Inspection Date of Semi-Annual Testing MAN_0005 17 www.brytoncorp.com
Warranty Information All products manufactured by Bryton Corp will carry a limited lifetime guarantee against product craftsmanship, one year labor and two year parts guarantee. The factory will service all units without cost to the buyer for one year from shipment. After the one year period, replacement of a defective part (labor) will be at buyer s expense. We will exchange all defective parts at no cost to the buyer for a period of two years from shipment. All defective parts must be returned within 30 days to ensure proper credit. An RMA from Bryton Corp must be obtained prior to items return. To place an order, contact our customer service department at 800-567-9500 or 317-334-8700 or by email at sales@brytoncorp.com 2017 Bryton Corporation www.brytoncorp.com 1-800-567-9500