A truly digital converting solution
Following the latest developments in laser cutting technology, we are proud to introduce the Digilase series 3, ABG s new automatic changeover, laser cutting machine. The basic configuration includes everything needed to process a complete job with automatic workflow: FAST & EFFICIENT Slitting module (option) Also available with automatic workflow Backscore (option) Also available with automatic workflow DIGILASE suite: user-friendly bespoke ABG software for workflow management Shuttle inspection system with automatic roll-back for operator to check die cut quality Unwind module 2 x CO 2 sealed laser heads (200 Watt each) Fully automated workflow management Matrix stripping Rewind module Chiller and fume extraction device Barcode scanner, quick and easy to set and recall job information (option) 120 micron laser beam for accurate cutting HMI sliding touch screen console Cantilevered unwind module for rolls up to 800mm Ø Wide range of Digicon finishing options 20 years experience of laser cutting Global service network Highly automated job changeover Flexible & cost effective Instant delivery for your customers
DIGILASE Bespoke software for automatic workflow changeover Unique automatic job-change workflow With our unique user-friendly software you can process all your jobs with no need to stop the machine and with no material wastage. The DIGILASE suite is bespoke software created by ABG to specifically process automatic workflow changeover label laser cutting. The compiler automatically calculates the optimum speed, power and laser beam path for the most effective result. All jobs and their specific parameters are saved in its library for future use. MULTIPLE JOBS Barcode reader Over lamination Automatic backscorer Automatic slitting 100% ABG software delivery more than 50 jobs in a single run (using rolls of 1000 linear metres) 1.30 minute average, full machine changeover time (inc. backscore, slitting, rewinding) 0.00 seconds die change
DIGILASE Intricate laser cutting Unlimited shape variations with superb control of depth for complicated, fine contours, allows pinpoint accuracy and minimal wastage. The compiler accurately adjusts the power of the laser to allow for cutting any shape, including sharp corners and through cuts, and avoids laser piercing. Bit extraction Materials Polypropylene Polyester Synthetics Paper Cardboard White / Clear Glossy / Matt Metallics Acute angle development for sharper corners Applications Kiss cut Through cut Marking Hatching Perforations Blank Cutting and more! PRECISE CUTTING Blended PE with PET and more! Unlimited shape variations up to 100 metres per minute 330mm web width the thinnest laser beam, only 120 micron
The DIGILASE Series 3 gives you the flexibility to cut any shape and deliver within a few hours from order receipt. Technical features Multiple jobs in a single run Fast on-the-fly changeover No need for hard die cutting tools Step and repeat parameters Automatic registration control Through cut with bit extraction Optional extras Automatic slitting Automatic backscorer MIS workflow Varnishing Lamination And more Roll to roll / sheet The Digilase can also be customised with a large range of printing and finishing options from the DIGICON Series 3 Standard specifications Speed Laser power Motion up to 100 m/min 2 x 200 Watt X - Y - Z Maximum web width 330mm (13 ) Unwind mandrel diameter 76mm (3 ) Max unwind roll diameter 800mm (31.5 ) other sizes available Rewind roll diameter (upper-lower) 600mm (23.6 ) - 800mm (31.5 ) Rewind mandrel diameter 76mm (3 ) other sizes available A B Graphic International Ltd, Lancaster Road, Carnaby Industrial Estate, Bridlington, East Yorkshire, England YO15 3QY Tel: + 44 1262 671138 Fax: + 44 1262 606359 info@abgint.com abgint.com