2 309 081 03 SELEKTA SELEKTA 170 top2 170 0 100 0,5mm - L N 230-240V~ Installation and Operating Manual Digital astronomic time switch MENU SELEKTA 170 top2 D F I E P NL PL 1 2 3 SELEKTA 170 top2 Correct connection required for smooth zero crossing switch operation (see connection diagram)!
Contents Basic safety instructions 3 Display and keys/operating instructions 4 Overview of menu selection 5 Connection/installation 6 Initial start-up 7 Menu item ASTRO Astro times, complete simulation, offset, astromode, position 8 Change position 9 Menu item PROGRAM Set switching time 10 Menu item MANUAL Manual and permanent switching 11 Menu item OPTIONS PIN code 12 Operating hours counter 12 OBELISK top2 memory card 13 Technical data 14 Service address/hotline 14 2
Basic safety instructions WARNING Danger of death through electric shock or fire! Installation should only be carried out by a professional electrician! The device is designed for installation on DIN top hat rails (in accordance with EN 60715) Corresponds to type 1 BSTU in accordance with IEC/EN 60730-2-7 Power reserve (10 years) is reduced if memory card is inserted (in battery operation) OBELISK top2 memory card: Avoid mechanical stress or contamination caused by other storage/ transport methods Designated use The astronomic timer is used for lighting equipment (roads), external staircases, shop windows, entrances etc. For use only in closed, dry rooms Disposal Dispose of equipment in an environmentally-friendly manner 3
Screen display and keys Operating instructions Programmed ON times Date display Sunrise/sunset display 1. Read text lines Flashing text/symbol is a prompt Channel status ON = On OFF = Off Time display Days of the week from 1 to 7 Display of active keys with relevant function 2. Make a decision MENU Activate screen Open menu Cancel menu ESC (leave menu) Selection options are displayed Confirm selection Confirm selection YES Confirmation press NO Change/ select press 4
Overview of menu selection 19 10 08 OFF 9:40 46 ASTRO PROGRAM TIME/DATE MANUAL OPTIONS ASTRO TIMES NEW TIME PERMANENT ON OPERATING HOURS METER COMPLETE SIMULATION CHECK DATE PERMANENT OFF LCD ILLUMINA- TION OFFSET CHANGE SUMMER-- WINTER MANUAL ON LANGUAGE ASTRO MODE DELETE DAY OF THE WEEK TIMER PIN POSITION COMPLETE SIMULATION DATE FORMAT FACTORY SETTING TIME FORMAT INFO 5
Connection/installation WARNING Warning, danger of death through electric shock! Must be installed by a professional electrician! Connect power source! Cover or shield any adjacent live components. Ensure device cannot be switched on! Check power supply is disconnected! Earth and bypass! Connect cable Strip cable by 8 mm (max. 9). Insert 45 cable in the open DuoFix screwless terminal (2 cables per terminal position possible). To open the DuoFix screwless terminal, press screwdriver downwards. DuoFix screwless terminal Spring screwless terminal NC contact Test tap 45 cable 6
Initial start-up Set language, country, town/city, date, time as well as summer/winter time (SO-WI) Press required key and display follows on screen (see fig). GERMAN KEEP PROGRAM LAND GERMANY STUTTGART ok ok ok ok ok ENGLISH DELETE PRO- GRAM COORDI NATES SPAIN BERLIN SPANISH ESTONIA FRANCE BREMEN DRESDEN DATE FORMAT YEAR MONTH DAY... GREAT BRITAIN... DUESSEL- DORF... TIME FORMAT HOUR MINUTE SUMMER-WIN- TER EUROPE 28 02 08 ON 9:40 46 7
ASTRO menu In the ASTRO menu astro times, complete simulation, offset, astromode as well as position (location) can be viewed or changed. Astro times Display of the astro times (including the offsets) for the current day Complete simulation Display of the switching behaviour with a freely selectable Start date (the holiday program is not displayed) Offset The offset (adjustment value) can be used to shift calculated astro times +/ 2 h. This enables the Astro switch-on and switch-off times to be adapted to local circumstances (e.g. mountains, high buildings etc.) or to personal requirements. Astro mode Evenings on, mornings off Switches on at sunset, switches off at sunset (Example: street lighting) Evenings off, mornings on Switches off at sunset, switches on at sunrise (Example: terrarium). Astro inactive The astro times are ineffective (timer function only). Position Location set by selecting a city or by coordinates (latitude/longitude, time zone). The OBELISK top2 memory card allows up to 10 further cities (= favourites) to be entered. 8
Change position E.g. enter different country, a different city. Press MENU (see fig.). ASTRO ok ASTRO TIMES COMPLETE SIMULATION OFFSET ASTRO MODE POSITION ok LAND COORDI NATES ok FRANCE SPAIN ESTONIA ok AJACCIO BAYONNE BORDEAUX GERMANY GREAT BRITAIN BREST CAEN...... 9
Set switching time A timer always consists of a start time and an end time (LASTS UNTIL). (e.g. night switch-off on Monday PROGRAM NEW 23:00 05:00 hrs) ok ok FREE 56 CHECK or Press MENU (see fig.). They have 56 free memory cells available. CHANGE DELETE COMPLETE SIMULATION NIGHT SWITCH-ON HOUR MINUTE MONDAY LASTS UNTIL DAY SWITCH-ON Start time Copy switching to other days of the week. The day of the week always relates to a start time SAVE PLUS TUESDAY COPY SAVE Switching time for one day 10
Manual and permanent switching Manual and permanent switching can be set using the menu in MANUAL or (in the automatic screen) by key combination (see fig). Manual control Reversing the channel status to the next automatic or programmed switching. Channel C1 Activate manual switching Briefly press both keys simultaneously. Activate permanent switching Simultaneously press both keys for 2 seconds. Cancelling manual/permanent switching Press both keys simultaneously. Permanent switching As long as a permanent switching (on or off) is activated, the programmed switching times are ineffective. 11
PIN code The PIN code is set in OPTIONS via the menu. If you have forgotten your PIN call the Theben Hotline. OPERATING HOURS METER OPTIONS Operating hours counter LCD ILLUMINA- TION LANGUAGE The operating hours of the channel (relay) are displayed and deleted in the OPTIONS menu. If the number of operating hours exceeds the value set in the Service menu, SERVICE will appear in the display. PIN FACTORY SETTING INFO ok WITHOUT PIN WITH PIN ok ok CURRENT PIN NEW PIN 00 00 Example: replace a light source after 5,000 h. Delete operating hours or increase the value set in service (e.g. to 10,000 h). 12
OBELISK top2 memory card Using memory card COPY OBELISK CLOCK COPY CLOCK OBELISK ok COPY PROGRAM COPY ALL DATA Insert memory card in the timer. Request saved switch timings, read to/from the time switch or start the Obelisk program. Remove OBELISK top2 memory card (No. 907 0 404) (optional) after programming etc. and store in cover. START OBELISK PROGRAM... Copy OBELISK CLOCK Copy program: Copies only the switching program. Copy all data: Copies the switching program and all settings (e.g. position, offset, time format etc.). Copy OBELISK CLOCK All switching programs and settings are copied to the memory card. 13
4 0,5mm 2 - C1/C2 1 C1 C2 5 2 6 3 12-24 V UC 0,5mm 2-1 2 3 12-24 V UC DATA 0,5mm 2-1 2 3 12-24 V UC 4 0,5mm 2 - C1/C2 1 C1 C2 5 2 6 3 12-24 V UC DATA 0,5mm 2-1 2 3 12-24 V UC 4 0,5mm 2 - C1/C2 1 C1 C2 5 2 6 3 12-24 V UC 0,5mm 2-1 2 3 12-24 V UC + Special voltage SELEKTA top2 24 V 170 4 100 171 4 100 172 4 100 MENU MENU MENU The technical data and the section on the "electrical connection" of 230 V devices ~ ~+ 12-24 V ~ 12-24 V ~+ ~+ ~ SELEKTA 170 top2 Ext MENU ~+ ~ ~+ ~ + SELEKTA 171 top2 RC ~ ~+ 12-24 V ~ 12-24 V ~+ + Ext ~+ ~ ~+ ~ (see operating instructions) do not apply to devices with special voltage. Electrical connection + SELEKTA 171 top2 RC Ext1 MENU Ext2 1 2 + SELEKTA172 top2 ~ ~+ 12-24 V ~ 12-24 V ~+ SELEKTA 170 top2 24 V SELEKTA 171 top2 RC 24 V SELEKTA 172 top2 24 V SELEKTA 170 top2 ~ 12-24 V ~+ 310 359 Technical data Permissible operating voltage: 12 V 24 V / 50 60 Hz +10 % 15 %, 12 V 24 V DC +10 % 15 % Switching capacity: 16 A, 250 V~ cos ϕ = 1 Incandescent lamp load, halogen load: 1400 W at 230 V or 6 A Flashlight (EB) 230 V: 180 W Compact lamp (EB) 230 V: 7 x 7 W, 6 x 11 W, 5 x 15 W, 5 x 20 W, 4 x 23 W Fluorescent lamps, parallel-corrected 230 V: 1 x 58 W / 7 µf, 2 x 36 W (4.5 µf each), max. 12 µf Halogen metal halide lamps 230 V: 1 x 70 W (12 µf) Standby output min.: 0.2 W (SELEKTA 170 + SELEKTA 172 top2 24 V); 0.8 W (SELEKTA 171 top2 RC 24 V) Power consumption type: 0.6 W (SELEKTA 170 top2 24 V), 1.2 W (SELEKTA 171 top2 RC 24 V); 0.9 W (SELEKTA 172 top2 24 V) Mode of operation: Type 1 BSTU in accordance with EN 60730-1 Pollution degree: 2 Rated impulse voltage: 4 kv Protection class: II for supply with FELV and/or mains switching III for supply with SELV and switching of SELV Protection rating: IP 20 in accordance with EN 60529 Power reserve: 10 years at 20 C Ext1 Ext2 MENU 1 2 The devices are designed for switching mains and low voltage (SELV, PELV, FELV). SELEKTA172 top2 SELEKTA 172 top2 24 V Ext1 Ext2 1 2 SELEKTA172 top2 With the SELEKTA 172 top2 24 V the type of low voltage must correspond to low voltage type of the supply voltage (SELV = SELV, PELV = PELV, FELV = FELV). If the switch output is 230 V, the time switch can be operated using low function voltage but not SELV as ~ ~ 12-24 V 12-24 V supply ~+ voltage. ~+ Lay the control cable separately from the load power. SELEKTA 170 top2 24 V, SELEKTA 171 top2 RC 24 V The devices are approved for switching SELV and mains voltage. External outputs The external outputs are designed for operating voltage of 12-24 V AC and DC and not for 230 V. Serviceadresse Theben AG Hohenbergstr. 32 72401 Haigerloch DEUTSCHLAND Fon +49 (0) 74 74/6 92-0 Fax +49 (0) 74 74/6 92-150 Hotline Fon +49 (0) 74 74/6 92-369 Fax +49 (0) 74 74/6 92-207 hotline@theben.de Addresses, telefon numbers etc. www.theben.de
Technical data Nominal voltage: 230 240 V~, +10 %/-15 % Frequency: 50 60 Hz Gap: <3 mm Power consumption: type 4 VA Contact material: AgSnO 2 Contact: two way switch Switch output: phase-independent (zero-crossover switching) Suitable for switching SELV (Safe Extra-Low Voltage) Switching capacity: 16 A/250 V~ cos ϕ = 1 Switching capacity: 10 A/250 V~ cos ϕ = 0.6 Switching capacity min.: 10 ma/230 V AC 100 ma/12 V AC/DC Glow lamp load: 2600 W Halogen lamp load: 2600 W Fluorescent lamps (VVG low-loss series devices): uncorrected: 2300 VA Series corrected: 2300 VA parallel-corrected: 730 VA (80 µf) Lead-lag circuit (duo): 1000 VA Fluorescent lamps (EVG Electronic series devices): 650 W Mercury and sodium vapour lamps: parallel-corrected: 730 VA (80 µf) 14 Compact fluorescent tubes (EVG): 22x7 W, 18x11 W, 16x15 W, 16x20 W, 14x23 W Permissible ambient temperature: 30 C... +55 C Protection class: II in accordance appropriate installation Protection rating: IP 20 in accordance with EN 60529 Pollution degree: 2 Service address/hotline Service address Theben AG Hohenbergstr. 32 72401 Haigerloch GERMANY Telephone +49 (0) 74 74 6 92 0 Fax: +49 (0) 74 74 6 92 150 Hotline Telephone +49 (0) 74 74 6 92 369 Fax +49 (0) 74 74 6 92 207 hotline@theben.de Addresses, telephone numbers etc. www.theben.de