SASE Table of Contents

800.522.2606 SASECompany.com Page 1

SASE Table of Contents BUSINESS BASICS DIAMOND TOOLING CHEMICAL, DYES & REPAIR 06 10 40 About SASE...6 SASE Warranty Policy...7 Transit Times...8-9 Metal Bond Diamonds...10-14 Hybrid Diamonds...15-16 Resin Bonds...17 Removal Tooling...18-19 Three Inch Tooling...20 Five Inch Tooling...21-25 Six Inch Tooling...26 Corner Tooling...27 SASE Galaxy System...28 Five Inch Cup Wheels...30 Six Inch Cup Wheels...31 Seven Inch Cup Wheels...30 Diamond Pads...34-37 Maintenance Pads...38 SASE Chemicals...40-41 Color Charts...42-45 FLOOR SCRAPERS HAND GRINDERS NEEDLE SCALERS 80 85 86 Cyclone...80 Twister...81 Hurricane...82 Lightning...83 Blades...84 Accessories...84 SC70...85 SC50...85 Corner Polisher...85 SC49...86 SC28AVS...86 SC28...86 Accessories...87 PRODUCT CATALOG Page 2

FLOOR GRINDERS INDUSTRIAL VACUUMS SCARIFIERS 46 66 74 PDG 9500 Plus...46 PDG 8000P (Propane)...47 PDG R8 (Remote)...48 PDG 8000...49 PDG 6000...50-51 PDG 5000...52 PDG 5000 (Propane)...53 PDG 3000 Edger...54 SHG 230...55 Edge Pro 180...56 Spyder...57 Equipment Packages...58-59 Plates...60-63 Adapters...64 Dust Skirts...65 Bull 1250PRO (Propane)...66 Bull 1250EBS...67 Bull 300EBS...68 Bull 240EBS...69 Bull 150...70 Bull Preseparator...71 Vacuum Parts...72-73 SC12E...74 SC10E...75 SC8E...76 Drums & Flail Shafts...77 Cutters...78-79 JOINT FILL & FLOOR REPAIR 88 MISCELLANEOUS EQUIPMENT 97 SPARE PARTS 102 All-Spall 3...88 Flo-Mender...89 Ez-Fill Pro...89 Flex Joint...89 Joint Saw / Crack Chaser...90 Seven Inch Saw Blades...91 Shaver / Soaper Pole...92 SC Poly Pump 10...93 Joint Color Chart...95 SC320 Shaver/Scarifier...97 27 IN Burnisher...98-99 Applicator Mop...100 Gloss Meter...100 MOH s Scratch Test...100 SWISSMEX Sprayer...101 Rubber Squeegee...101 Spare Parts...102-107 Equipment Rental...108 800.522.2606 SASECompany.com Page 3

Our People James Weder CEO Marcus Turek Vice President of Sales Dusty Brock Vice President of Finance John Abrahamson Vice President of Operations Chase Abrahamson Sales & Technical Support Pat Coughenour Sales & Technical Support Mike Duke Sales & Technical Support Lizz Eng Sales & Technical Support Peter Ericson Sales & Technical Support Adam Hicks Sales & Technical Support Jason Kubik Sales & Technical Support Steve Lackey Sales & Technical Support Daniel Lane Sales & Technical Support Dustin McMasters Sales & Technical Support Daryl Meidinger Sales & Technical Support Jay Reardon Sales & Technical Support Wes Rhinehart Sales & Technical Support Jon Sandvik Sales & Technical Support Mickey Roberson Sales & Technical Support Dustin Thomas Sales & Technical Support Michael Turek SASE Signature Floor Clif Rawlings Technical Director Mike Baldwin Customer Service & Support Jonathan Dupree Customer Service & Support Justin Moore Customer Service & Support Matt Myers Customer Service & Support Austin Rhinehart Customer Service & Support Lydia Lane Accounts Receivable Megan Moore Office Assistant Rob Low Manufacturing Manager Travis DeMaio Inventory Control Specialist Larry Kuebler Purchasing & Inventory Keith Buster Technical Writer PRODUCT CATALOG Page 4

Our People Rhett Abrahamson Purchasing & Inventory Tony Caulfield Inventory Control Jenny Eichholz Marketing & Graphic Design Eric Wilson Mechanical Engineer Corey Myers Service Technician Shipping, Receiving, & Assembly - Kent Shipping, Receiving, & Assembly - Rockford 800.522.2606 SASECompany.com Page 5

About SASE Sales, Service & Distribution 2475 Stock Creek Blvd. Rockford, TN 37853 (Knoxville) Assembly & Manufacturing 26423 79th Ave South Kent, WA 98032 (Seattle) Monday - Friday 8:00 am - 7:00 EST P 800.522.2606 F 865.745.4110 E sales@sasecompany.com SASE accepts all major credit cards, debit cards, wire transfers, cash and net 30 with approved credit. The majority of our parcels are shipped via UPS. We offer FedEX as requested. Rockford truck shipments - Old Dominion & R & L Carriers Kent truck Shipments - Holland SASE is committed to educating and sharing our knowledge through SASE University to our contractors in this exciting and growing industry. SASECompany.com Find us on PRODUCT CATALOG Page 6

MANUFACTURER'S WARRANTY POLICY Included in this warranty are the following pieces of equipment: Planetary Diamond Grinders: PDG 9500 Plus, PDG 8000, PDG 6000, PDG 5000, PDG 3000, Edge Pro 180 Dust Extractors: Bull 1250 EBS, Bull 1250 EBS Propane, Bull 300 EBS, Bull 240 EBS Our Commitment to our customer: SASE Company ("SASE") equipment is warranted to be free of defects in workmanship and materials for a period of one (1) year from original date of purchase. In the event that you should have a claim SASE shall repair, replace or remedy the defective parts resulting from the faulty design, materials or workmanship. Note: This warranty is only valid for equipment either sold by SASE or by an authorized wholesaler or distributor. Limitations: Warranty does not apply to cosmetic damage, damage due to lightning, electrical surges, fire, flood or other acts of God, accident, misuse, abuse, repair or alteration by other than factory service (unless service center was approved in writing by SASE), negligence, or improper or neglected maintenance as recommended by SASE. Common wear parts, such as belts, bearings, seals, filters, dust skirts, wheels, etc., are exempt from warranty. SASE is not responsible for loss of income or down time as a result faulty design, materials or workmanship. Warranty coverage is valid once a warranty registration card is filled out and returned to SASE. A $100 labor charge many be assessed on the items returned for warranty repair in which no fault is found. Freight charges and associated fees will then become the responsibility of the customer in such an instance. Damages which are caused during transportation are not covered under warranty. Such damage claims should be filed with the freight carrier. Claims: In the unlikely event that you should experience a defect please contact your SASE representative or a SASE service technician by calling 800.522.2606. Please have all pertinent information readily available such as, invoice with date of purchase, model and serial number, and an explanation of the issue. SASE will respond immediately with a corrective action. Freight responsibility for approved warranty claims: If the piece of equipment was purchased within 90 days of warranty claim, SASE will arrange for ground freight and will assume all ground freight charges to send the customer the parts required or to send the equipment to an authorized SASE repair center. This included inbound and out bound ground freight and all fees (duties, fuel surcharges) associated with the shipments. If the piece of equipment was purchased beyond the 90 days and prior to one(1) year of warranty claim, SASE will cover 50% of all ground freight charges, including inbound and outbound freight and all fees (duties, fuel surcharges) associated with the shipment. 800.522.2606 SASECompany.com Page 7

SAME DAY SHIPPING SASE ships 98% of orders the same day R+L Carriers Ground Transit 1 Day 2 Days 3 Days 4 Days 5 Days UPS Ground Transit Times 1 Day 2 Days 3 Days 4 Days 5 Days 6 Days FedEx Ground Transit Times 1 Day 2 Days 3 Days 4 Days 5 Days 6 Days 7+ Days PRODUCT CATALOG Page 8

Prince Rupert BRITISH Fort Nelson COLUMBIA High Level Smithers Fort St. John Terrace Chetwynd Peace River Houston Burns Lake Dawson Creek ALBERTA Grande Prairie Prince George Grande Cache Fort McMurray La Ronge OD DOMESTIC LABRADOR Williams Lake Quesnel 100 Mile House Hinton Edson Red Deer Edmonton Lloydminster SASKATCHEWAN Prince Albert MANITOBA Kamloops Revelstoke Melfort Kelowna Calgary QUEBEC Saskatoon Vancouver Invermere Yorkton Castlegar Brooks Swift Current ONTARIO Cranbrook Regina Seattle/Tacoma Lethbridge NEW P.E.I. Olympia Medicine Hat WA Kalispell BRUNSWICK Spokane Havre Winnipeg Halifax Yakima Quebec Sidney ME Portland Pasco Missoula Great Falls NOVA Glendive Lewistown SCOTIA Helena Corvallis Eugene Butte MT ND Montreal Fargo Ottawa OR Miles City Bismarck Portland Bozeman Billings MN Duluth Burlington Boise WI NH Medford Willmar VT ID Idaho Falls Aberdeen Traverse NY Walpole SD Wausau City Toronto Albany Boston Twin Falls Minneapolis/ Pocatello St. Paul MI Worcester Oshkosh Syracuse WY Rapid City Grand South Windsor MA La Crosse Rapids Saginaw London Buffalo New Haven Providence Afton Sioux Falls Milwaukee Ann Arbor CT Logan Mason City Scranton Boonton RI Chico Des Lansing Elko Plaines Detroit Long Island Rock Springs Rockford Erie IA South Cleveland PA Brooklyn Allentown NJ Reno Cheyenne Bend Jersey City Toledo Pittsburgh Philadelphia Sacramento Des Moines Chicago South Plainfield Salt Lake City Vernal NE Cedar Youngstown Harrisburg San Francisco NV Omaha Rapids Columbus New Castle Rock Ft. Wayne OH La Salle Baltimore Stockton UT CO Grand Island Island IN Dayton Winchester Denver DE Price San Jose Richfield St. Joseph Grand Junction Decatur Cincinnati WV Seaford Manassas MD KS Indianapolis Waynesboro Fresno Topeka Columbia Charleston Richmond St. George Moab IL Colorado Springs Salina VA CA Evansville Louisville Great Bend Kansas City St. Louis Roanoke Lynchburg Norfolk Las Vegas Lexington Bakersfield Martinsville MO Durham Oxnard Wichita KY Wytheville Paducah Rialto Farmington Parsons Greensboro Springfield Cookeville Nashville Morristown NC Hickory Wilson Los Angeles Charlotte Fayetteville OK Tulsa Albuquerque Jackson TN Jonesboro Chattanooga Asheville Long Beach AZ Ft. Smith Memphis West Atlanta Greenville Wilmington NM Oklahoma City AR Amarillo Florence San Diego Phoenix Tupelo Huntsville North Georgia Columbia Little Rock Birmingham Wichita Falls Atlanta Charleston Augusta SC Tucson Texarkana AL Lubbock MS GA Macon Vidalia Monroe Savannah Abilene El Paso Fort Worth Dallas Jackson Montgomery Columbus Odessa Shreveport Dothan Sylvester Tyler Mobile TX Waco LA Jacksonville Austin Beaumont Lafayette FL Baton Ocala Houston Rouge New Orleans San Antonio Orlando Tampa Laredo Corpus Sarasota Christi West Palm Beach Fort Myers Pompano Beach Brownsville Windsor Miami NEWFOUNDLAND Old Dominion Freight Transit Times 1 Day 2 Days 3 Days 4 Days 5 Days 6 Days FedEx Small Package Ground Service to Canada 3 Days 4 Days 5 Days 6 Days 7 Days 11/6/2012 New York DAYS IN TRANSIT US TO CANADA - UPS STANDARD 10001 8/22/2012 UPS Standard Days in Transit to Canada St. John's 7 Victoria Edmonton 5 Vancouver Red Deer 5 6 6 6 5 Kelowna Calgary 4 Saskatoon Winnipeg Regina 4 4 Quebec City 4 Montreal 4 Ottawa Sudbury 4 4 Charlottetown 5 Moncto 5 5 Halifax London 3 3 Toronto Windsor 3 http://d-maps.com/carte.php?lib=canada_map&num_car=23179&lang=en. 800.522.2606 SASECompany.com Page 9

Diamond Tooling YELLOW SERIES Very soft bond used to grind extremely hard concrete floors. ITEM DESCRIPTION IDEAL USE HOL.502630QCS HOL.502534QCS Yellow DS 16 Grit Yellow SS 16 Grit Prepping for 15 mil coatings HOL.502631QCS HOL.502535QCS Yellow DS 25 Grit Yellow SS 25 Grit Designed for exposing large aggregate or removing or prepping for 10 mil coatings HOL.502632QCS HOL.502536QCS Yellow DS 40 Grit Yellow SS 40 Grit Designed to hone concrete for diamond polishing or thin mil coating application HOL.502633QCS HOL.502537QCS Yellow DS 80 Grit Yellow SS 80 Grit Follows 40 Grit, often used as a first step on new concrete, ideal prep for acid staining HOL.502634QCS HOL.502538QCS Yellow DS 150 Grit Yellow SS 150 Grit Follows the 80 Grit in polishing to leave a smooth, even profile GOLD SERIES Very soft bond used to grind very hard to hard concrete floors. ITEM DESCRIPTION IDEAL USE HOL.502555QCS HOL.502549QCS Gold DS 16 Grit Gold SS 16 Grit Designed for exposing large aggregate and removing or prepping for 10-20 mil coatings HOL.5025555QCS HOL.5025495QCS Gold DS 25 Grit Gold SS 25 Grit Designed for exposing large aggregate or removing or prepping for 10 mil coatings HOL.502556QCS HOL.502550QCS Gold DS 40 Grit Gold SS 40 Grit Designed to hone concrete for diamond polishing or thin mil coating preparation HOL.502557QCS HOL.502551QCS Gold DS 80 Grit Gold SS 80 Grit Follows 40 Grit used as a first step on new concrete, ideal prep for acid staining HOL.502558QCS HOL.502552QCS HOL.502559QCS Gold DS 150 Grit Gold SS 150 Grit Gold DS 300 Grit Follows the 80 Grit in polishing to leave a smooth, even profile Removes 150 Grit scratch pattern and leaves an ideal profile prior to going to a resin bond diamond HOL.502621QCS HOL.502629QCS Gold DS 25 Grit Arrow Gold SS 25 Grit Arrow Follows the 80 Grit in polishing to leave a smooth, even profile PRODUCT CATALOG Page 10

Metal Bond Diamonds BLUE SERIES Soft bond used to grind hard to medium concrete floors. ITEM DESCRIPTION IDEAL USE HOL.502601QCS HOL.502602QCS HOL.5026025QCS HOL.502603QCS HOL.502604QCS HOL.502605QCS HOL.502606QCS HOL.502620QCS HOL.502628QCS Blue DS 6 Grit Blue DS 16 Grit Blue DS 25 Grit Blue DS 40 Grit Blue DS 80 Grit Blue DS 150 Grit Blue DS 300 Grit Blue DS 25 Grit Arrow Blue SS 25 Grit Arrow Designed for exposing large aggregate and removing or prepping for 20 mil coatings Designed for exposing large aggregate or removing or prepping for 10 mil coatings Designed for exposing large aggregate or removing or prepping for 10 mil coatings Designed to hone concrete for diamond polishing or thin mil coating preparation Designed to follow 40 Grit, often used as a first step on new concrete, ideal prep for acid staining Designed to follow the 80 Grit in polishing applications to leave a smooth, even profile Removes 150 Grit scratch pattern and leaves an ideal profile prior to going to a resin bond Fast effective coatings removal and floor preparation RED SERIES Medium bond used to grind medium to soft concrete floors. ITEM DESCRIPTION IDEAL USE HOL.502612QCS HOL.502542QCS HOL.5026125QCS HOL.502613QCS HOL.502543QCS HOL.502614QCS HOL.502615QCS HOL.502616QCS HOL.502619QCS HOL.502627QCS Red DS 16 Grit Red SS 16 Grit Red DS 25 Grit Red DS 40 Grit Red SS 40 Grit Red DS 80 Grit Red DS 150 Grit Red DS 300 Grit Red DS 25 Grit Arrow Red SS 25 Grit Arrow Designed for exposing large aggregate and removing or prepping for 10-20 mil coatings Designed for exposing large aggregate or removing or prepping for 10 mil coatings Designed to hone concrete for diamond polishing or thin mil coating preparation Follows 40 Grit, used as a first step on new concrete, ideal prep for acid staining Designed to follow the 80 Grit in polishing applications to leave a smooth, even profile Removes 150 Grit scratch pattern and leaves an ideal profile prior to going to a resin bond Fast effective coatings removal and floor preparation 800.522.2606 SASECompany.com Page 11

Diamond Tooling BLACK SERIES Hard bond used to grind soft concrete floors. ITEM DESCRIPTION IDEAL USE HOL.502622QCS HOL.5026225QC HOL.502623QCS HOL.502624QCS HOL.502625QCS HOL.502626QCS Black DS 16 Grit Black DS 25 Grit Black DS 40 Grit Black DS 80 Grit Black DS 150 Grit Black DS 300 Grit Designed for exposing large aggregate and removing or prepping for 10-20 mil coatings Designed for exposing large aggregate or removing or prepping for 10 mil coatings Designed to hone concrete for diamond polishing or thin mil coating preparation Designed to follow 40 Grit, often used as a first step on new concrete, ideal to prep for acid staining Designed to follow the 80 Grit in polishing applications to leave a smooth, even profile Removes 150 Grit scratch pattern and leaves an ideal profile prior to going to a resin bond diamond Quick Change System PRODUCT CATALOG Page 12

Metal Bond Diamonds ORANGE SERIES Very hard bond used to grind very soft concrete floors. ITEM DESCRIPTION IDEAL USE HOL.502607QCS Orange DS 16 Grit Designed for exposing large aggregate and removing or prepping for thin mil coatings HOL.5026075QC Orange DS 25 Grit Designed for exposing large aggregate or removing or prepping for 10 mil coatings HOL.502608QCS Orange DS 40 Grit Designed to hone concrete for diamond polishing or thin mil coating preparation HOL.502609QCS Orange DS 80 Grit Designed to follow 40 Grit, often used as a first step on new concrete, ideal prep for acid staining HOL.502610QCS Orange DS 150 Grit Designed to follow the 80 Grit in polishing applications to leave a smooth, even profile HOL.502611QCS Orange DS 300 Grit Removes 150 Grit scratch pattern and leaves an ideal profile prior to going to a resin bond diamond The Orange Series Long Life Diamonds were engineered for the most abrasive grinding applications, including rained on concrete, spalled concrete, broom finished concrete, and shot blasted floors. ITEM DESCRIPTION IDEAL USE HOL.502808QCS HOL.502809QCS HOL.502810QCS Orange Long Life 30/40 Grit Orange Long Life 60/80 Grit Orange Long Life 120/150 Grit Designed for smoothing out broom finished and heavy shot blasted concrete surfaces Designed for smoothing rained on slabs,sight shot blasted concrete and for removing thin coatings Designed for smoothing rained on slabs and extremely soft concrete 800.522.2606 SASECompany.com Page 13

Diamond Tooling 3" Metal Bond Pucks ITEM HOL.800753 HOL.800740 HOL.800741 HOL.800749 DESCRIPTION 5 Segment Gold 18/20 Grit 5 Segment Gold 30/40 Grit 5 Segment Gold 60/80 Grit 5 Segment Gold 120/150 Grit 3" HOL.800754 HOL.800742 HOL.800743 HOL.800750 10 Segment Gold 18/20 Grit 10 Segment Gold 30/40 Grit 10 Segment Gold 60/80 Grit 10 Segment Gold 120/150 Grit HOL.800755 HOL.800744 HOL.800745 HOL.800751 5 Segment Blue 18/20 Grit 5 Segment Blue 30/40 Grit 5 Segment Blue 60/80 Grit 5 Segment Blue 120/150 Grit HOL.800756 HOL.800746 HOL.800747 HOL.800752 10 Segment Blue 18/20 Grit 10 Segment Blue 30/40 Grit 10 Segment Blue 60/80 Grit 10 Segment Blue 150 Grit HOL.800757 HOL.800759 HOL.800761 HOL.800763 5 Segment Black 18/20 Grit 5 Segment Black 30/40 Grit 5 Segment Black 60/80 Grit 5 Segment Black 120/150 Grit HOL.800758 HOL.800760 HOL.800762 HOL.800764 10 Segment Black 18/20 Grit 10 Segment Black 30/40 Grit 10 Segment Black 60/80 Grit 10 Segment Black 120/150 Grit PRODUCT CATALOG Page 14

Hybrid Diamonds ITEM DESCRIPTION IDEAL USE HOL.200809 HOL.200810 D2 Hybrid Diamonds 80 Grit D2 Hybrid Diamonds 120 Grit Followed by Xenith pads for polishing overlays Followed by Xenith pads for polishing overlays QuikCut hybrids are the perfect transition diamond as you move from metal to resin bond. In some applications, these diamonds can be used as the initial cut, thus eliminating the use of a metal bond. ITEM DESCRIPTION IDEAL USE HOL.502832Y 3 QuikCut Hybrid Diamond Yellow Series, Medium Grit For quick, aggressive cutting on new concrete. (For hard concrete) HOL.502832B 3 QuikCut Hybrid Diamond, Black Series, Medium Grit For quick, aggressive cutting on new concrete. (For soft to medium concrete) HOL.502838Y 2 QuikCut Hybrid Diamond, Yellow Series, Medium Grit For quick, aggressive cutting on new concrete. (For hard concrete) HOL.502838B 2 QuikCut Hybrid Diamond, Black Series, Medium Grit For quick, aggressive cutting on new concrete. (For soft to medium concrete) 800.522.2606 SASECompany.com Page 15

Diamond Tooling 3 IN Hybrid Bond Pucks These hybrid pucks are fast cutting and designed to use wet or dry. ITEM DESCRIPTION 3" HOL.4005025 HOL.400502 HOL.400503 HOL.400504 HOL.400505 3" Hybrid Diamond Puck Lime Green 30 Grit 3 Hybrid Diamond Puck Grey 50 Grit 3 Hybrid Diamond Puck Black 100 Grit 3 Hybrid Diamond Puck Blue 200 Grit 3 Hybrid Diamond Puck Red 400 Grit 3 IN Hybrid Bond WET Pucks These hybrid pucks are fast cutting and designed to use wet. ITEM HOL.300600 HOL.300601 HOL.300602 HOL.300603 HOL.300604 DESCRIPTION 3" Hybrid Puck Wet Lime 30 Grit 3" Hybrid Puck Wet Grey 50 Grit 3" Hybrid Puck Wet Black 100 Grit 3" Hybrid Puck Wet Blue 200 Grit 3" Hybrid Puck Wet Red 400 Grit 3" PRODUCT CATALOG Page 16

Resin Bond Diamonds "Hockey" Puck Style ITEM DESCRIPTION IDEAL USE 3" HOL.502710 3 Puck Style Grey 50 Grit Resin Removal of scratches left by metal bonds HOL.502711 3 Puck Style Black 100 Grit Resin Used as the first step in polishing HOL.502712 3 Puck Style Blue 200 Grit Resin Used for removal of 100 grit scratches HOL.502713 HOL.502714 3 Puck Style Red 400 Grit Resin 3" Puck Style White 800 Grit Resin Used as the last step before dye and densifier are applied Provides a high shine, often the last step in polishing fo retail stores HOL.502715 3" Puck Style Yellow 1500 Grit Resin Provides a very high shine HOL.502716 3" Puck Style Green 3000 Grit Resin Provides the highest shine X SERIES ITEM DESCRIPTION IDEAL USE 3" HOL.300705 3" 800 Grit White High shine HOL.300706 3" 1500 Grit Yellow A very high shine HOL.300707 3" 3000 Grit Green The highest shine ITEM DESCRIPTION IDEAL USE HOL.200839 50 Grit Grey Removal of scratches left by metal bonds 2" HOL.200840 100 Grit Black Used as the first step in polishing HOL.200841 200 Grit Blue Typically used as the last step before dye and densifier are applied HOL.200842 400 Grit Red Used to remove 200 Grit profile HOL.200843 800 Grit White Provides high shine, last step in polishing of retail stores HOL.200844 1500 Grit Yellow Provides a very high shine 800.522.2606 SASECompany.com Page 17

Diamond Tooling WÜLF SASE offers a complete line of PCD (poly crystalline diamonds) and Removal Tools for fast, effective removal of coatings and self-levelers. ITEM DESCRIPTION IDEAL USE HOL.200996QCS HOL.200997QCS HOL.200993(A) HOL.200994(B) PCD Split SS QCS PCD Split DS QCS PCD ¼ Round on arrow DS *PCD ¼ Round on arrow DS <opposite> For fast, effective thin mil coatings removal. For fast, effective thick mil coatings removal. Tears through elastic or rubberized membranes and compounds. HOL.200510(A) HOL.200511(B) Silver PCD Wear Bar *Silver PCD Wear Bar DS <opposite> Removes thin to medium mil coatings without damaging the concrete surface. Diamond wear bar controls the depth of the cut. HOL.201012(A) HOL.201013(B) HOL.201014(A) HOL.201015(B) NB.13.118 Gold PCD Diamond Plate 270mm *Gold PCD Diamond Plate 270mm <opposite> Silver PCD Diamond Plate with Wear Bar, (A) 270mm *Silver PCD Diamond Plate with Wear Bar, (B)270mm <opposite> Screw, Flat Head Socket Cap Note: These are directional tools. (A) clockwise (B) counter-clockwise Propane Planetary Grinders only use (B) counter-clockwise Ideal for removing medium to thick mil coatings. 10 PCD segments versus 6, providing maximum removal. Removes thin to medium mil coatings without damaging the concrete surface. Diamond wear bar controls the depth of the cut while leaving a smooth profile. For use with non-plate style PCD tooling. Requires three per segment. Tungsten Scraper Squares ITEM DESCRIPTION IDEAL USE HOL.904150 HOL.SPMW643 Tungsten Scraper Holder w/ Scraper Squares (complete unit) Tungsten Scraper Square For quick and easy removal of even the thickest and most difficult mastics For quick and easy removal of even the thickest and most difficult mastics HOL.904145 Tungsten Holder For quick and easy removal of even the thickest and most difficult mastics HOL.900000 Screws, Flat Head Socket Cap For use with non-plate style PCD tooling. Requires 3 per segment PRODUCT CATALOG Page 18

Removal Tooling Bush Hammer A bush hammer is a tungsten tip tool used to remove coatings or texture concrete. The 45/100 pins leave an excellent profile for the bonding of coatings and overlays. This tool is also effective at creating a non-slick profile suitable for both inside and outside environments. ITEM DESCRIPTION IDEAL USE SAS.905999 270mm Bush Hammer Complete Plate Coarse profile, 45 pin Fits PDG 8000 SAS.905800 45 Pin Roller w / Holder, Coarse profile Fits PDG 8000 SAS.905700 45 Roller Only, Coarse profile Fits PDG 8000 SAS.905600 Holder Only (Coarse & Medium) Fits PDG 8000 SAS.905998 270mm Bush Hammer Complete Plate Medium profile, 100 pin Fits PDG 8000 SAS.905801 100 Pin Roller w / Holder, Medium profile Fits PDG 8000 SAS.905701 100 Pin Roller Only, Medium profile Fits PDG 8000 SAS.905500 200mm Bush Hammer Complete Plate Standard profile Fits PDG 6000 & 5000 SAS.20015 Mounting head assembly, 5K bush hammer Fits PDG 5000 SAS.20016 Roller, 5K Bush Hammer Fits PDG 5000 SAS.20007 Bearing, 5k Bush Hammer Fits PDG 5000 SAS.00178 240mm Bush Hammer Plate Standard profile Fits Diamatic, 780 800.522.2606 SASECompany.com Page 19

Diamond Tooling 3 IN Metal Flex The Metal Flex diamonds are ideal for removing mastics and sealers, and to profile edges without gouging the floor. Each individual diamond segment is 1/8 and won t bind or close up. ITEM DESCRIPTION IDEAL USE SC30.500502 3 Metal Flex Aqua 30 Grit Aggressive cutting without gouging 3" SC30.500503 3 Metal Flex Grey 50 Grit Ideal for removing sealers and as a first cut on new concrete SC30.500504 3 Metal Flex Black 100 Grit Removes scratches left by 50 Grit Metal Flex Pads 3 IN Polishing Resin Bond Diamonds ITEM DESCRIPTION IDEAL USE SC30.500240 3 Polishing Resin Bond Diamond Grey 50 Grit These polishing diamonds work great under smaller, lighter weight machines, and are a great alternative for concrete polishing. Good on various self-leveling compounds. Removal of scratches left by metal bonds SC30.500241 3 Polishing Resin Bond Diamond Black 100 Grit Used as the first step in polishing 3" SC30.500242 3 Polishing Resin Bond Diamond Blue 200 Grit Used for removal of 100 Grit scratches SC30.500243 SC30.500244 3 Polishing Resin Bond Diamond Red 400 Grit 3 Polishing Resin Bond Diamond White 800 Grit Typically used as the last step before dye and densifier are applied Provides a high shine, often the last step in polishing of retail stores SC30.500245 3 Polishing Resin Bond Diamond Yellow 1500 Grit Provides a very high shine SC30.500246 3 Polishing Resin Bond Diamond Green 3000 Grit Provides a very high shine PRODUCT CATALOG Page 20

5 Inch Tooling Metal Flex Pads The Metal Flex Pads are ideal for removing mastics and to profile edges without gouging the floor. Each individual diamond segment is 1/8 and won t bind or close up providing an extended life. These diamonds are for use on the SASE SC50 and other industry 5 hand grinders. ITEM DESCRIPTION IDEAL USE 5" HAND GRINDERS SC50.500502 5 Metal Flex Aqua 30 Grit Aggressive cutting without gouging SC50.500503 5 Metal Flex Grey 50 Grit Ideal for removing sealers and as a first cut on new concrete SC50.500504 5 Metal Flex Black 100 Grit Removes scratches left by 50 Grit Metal Flex Pads 5 IN Polishing Resin Bond Diamonds These diamonds are excellent for concrete polishing edge work. For use on the SASE SC50 and other industry 5 hand grinders. ITEM DESCRIPTION IDEAL USE 5" HAND GRINDERS SC50.500240 SC50.500241 SC50.500242 SC50.500243 SC50.500244 SC50.500245 SC50.500246 5 Polishing Resin Bond Diamond Grey 50 Grit 5 Polishing Resin Bond Diamond Black 100 Grit 5 Polishing Resin Bond Diamond Blue 200 Grit 5 Polishing Resin Bond Diamond Red 400 Grit 5 Polishing Resin Bond Diamond White 800 Grit 5 Polishing Resin Bond Diamond Yellow 1500 Grit 5 Polishing Resin Bond Diamond Green 3000 Grit Removal of scratches left by metal bonds Used as the first step in polishing Used for removal of 100 Grit scratches and as the last step before concrete dye in some applications Typically used as the last step before dye and densifier are applied Provides a high shine, often the last step in polishing of retail stores Provides a very high shine Provides the highest shine 800.522.2606 SASECompany.com Page 21

Diamond Tooling 5 IN SureCut Copper Bond These copper bonded diamonds provide improved longevity and elimination of swirl marks. These diamonds are for use on the SASE SC50 and other industry 5 hand grinders. ITEM DESCRIPTION IDEAL USE SC50.500400 5 SURE CUT Copper Polishing Diamond Aqua 30 Grit 5" HAND GRINDERS Often used in place of the 50 Grit metal bond for removal of thin mil coatings and sealers SC50.500401 SC50.500402 5 SURE CUT Copper Polishing Diamond Grey 50 Grit 5 SURE CUT Copper Polishing Diamond Black 100 Grit Often used in place of the 100 Grit metal bond for removal of thin mil coatings and sealers Often used to reduce scratches left from 50 Grit metal bond 5 IN Honeycomb Pads These dry polishing pads are the most economical and productive way to do edge work. Item Description Ideal Use 5" HAND GRINDERS SC50.500339 5" Honeycomb Pad, Lime 30 Grit Aggressive cut, quick & fast SC50.500340 5" Honeycomb Pad, Blue 50 Grit Aggressive cut, quick & fast SC50.500341 5" Honeycomb Pad, Yellow 100 Grit Aggressive cut, quick & fast SC50.500342 5" Honeycomb Pad, Orange 200 Grit Aggressive cut, quick & fast SC50.500343 5" Honeycomb Pad, Red 400 Grit Aggressive cut, quick & fast SC50.500344 5" Honeycomb Pad, Green 800 Grit Aggressive cut, quick & fast 5 IN Backer Pads ITEM DESCRIPTION IDEAL USE 5" HAND GRINDERS SC50.900901 5 Rigid Backer Pad 5/8 Arbor Preferred use with 5 Metal Flex SC50.900902 5 Flexible Backer Pad 5/8 Arbor Preferred use with 5 Resin Polishing Pad PRODUCT CATALOG Page 22

5 Inch Tooling Hybrid Edge Pad Using this new high quality SASE hybrid edge tooling will eliminate steps in the edge polishing process. ITEM DESCRIPTION IDEAL USE SC50.500600 5" Hybrid Edge Pad For use on SC50 5" HAND GRINDERS SC50.500800 5" Hybrid Edge Pad, 80 Grit For use on SC50 5 IN Rapid Strip Disc ITEM DESCRIPTION IDEAL USE SAS.04015 5" Rapid strip disc, coarse wheel used to sand structural polyurethane off of polished concrete For use on SC50 5" HAND GRINDERS Racatac ITEM NUMBER DESCRIPTION SAS.RACATAC Work with both hands, while supporting your back and knees. Fully adjustable seat and chest support. Unit contains 3 in wheels. Hand Grinder Shrouds ITEM DESCRIPTION FITS MACHINES SC70.900918 SASE 7 Convertible Shroud SC70 and other industry 7 hand grinders SC50.900900 5 Shroud, Complete Assembly SC50 and other industry 5 hand grinders 800.522.2606 SASECompany.com Page 23

Diamond Tooling 5 IN Metal Bond These diamonds are for use on the SASE PDG 3000 Edger. ITEM DESCRIPTION IDEAL USE 5" PDG 3000 HOL.300315 5" Metal Yellow Series 30/40 Grit For use on hard concrete HOL.300319 5" Metal Gold Series 30/40 Grit For use on medium concrete HOL.300323 5" Metal Blue Series 30/40 Grit For use on soft concrete 5 IN Metal Flex Pads The Metal Flex diamonds are ideal for removing mastics and sealers, and to profile edges without gouging the floor. These diamonds are for use on the SASE PDG 3000 Edger. ITEM DESCRIPTION IDEAL USE 5" PDG 3000 HOL.300309 5" Metal Flex Grey 50 Grit Ideal for removing sealers and as a first cut on new concrete HOL.300310 5" Metal Flex Black 100 Grit Removes scratches left by 50 Grit Metal Flex Pads 5 IN QuikCut Hybrid Resin These diamonds are for use on the SASE PDG 3000 Edger. ITEM DESCRIPTION IDEAL USE 5" PDG 3000 HOL.300300 5" QUIKCUT Hybrid Resin 30 Grit Removes sealers and coatings HOL.3003005 5" QUIKCUT Hybrid Resin 80 Grit Removes sealers and coatings PRODUCT CATALOG Page 24

5 Inch Tooling 5 IN Resin Bond Diamonds ITEM DESCRIPTION IDEAL USE 5" PDG 3000 HOL.300301 5 Polishing Resin Bond Diamond Grey 50 Grit Removal of scratches left by metal bonds HOL.300302 5 Polishing Resin Bond Diamond Black 100 Grit Used as the first step in polishing HOL.300303 HOL.300304 HOL.300305 5 Polishing Resin Bond Diamond Blue 200 Grit 5 Polishing Resin Bond Diamond Red 400 Grit 5 Polishing Resin Bond Diamond White 800 Grit Used for removal of 100 Grit scratches and as the last step before concrete dye in some applications Typically used as the last step before dye and densifier are applied Provides a high shine, often the last step in polishing of retail stores HOL.300306 5 Polishing Resin Bond Diamond Yellow 1500 Grit Provides a very high shine HOL.300307 5 Polishing Resin Bond Diamond Yellow 3000 Grit Provides the highest shine 5 IN PCD These diamonds are for use on the SASE PDG 3000 Edger. ITEM DESCRIPTION IDEAL USE HOL.300311 5 " PCD Thin mil removal tool 5" PDG 3000 800.522.2606 SASECompany.com Page 25

Diamond Tooling 6 IN Metal Flex Diamonds The Metal Flex Pads are ideal for removing mastics and to profile edges without gouging the floor. Each individual diamond segment is 1/8 and won t bind or close up providing an extended life. ITEM DESCRIPTION IDEAL USE 6" EDGEPRO SC60.500249 6 Metal Flex Yellow 16 Grit Very Aggressive cutting without gouging SC60.500250 6 Metal Flex Aqua 30 Grit Aggressive cutting without gouging SC60.500251 6 Metal Flex Grey 50 Grit Ideal for removing sealers and as a first cut on new concrete SC60.500252 6 Metal Flex Black 100 Grit Removes scratches left by 50 Grit Metal Flex Pads 6 IN Hybrid Edge Pro Pad Using this new high quality SASE hybrid edge tooling will eliminate steps in the edge polishing process. ITEM DESCRIPTION IDEAL USE SC.60500260 6 Hybrid edge pro pad 100 Grit SASE Edge Pro 180 6" EDGEPRO 6 IN Polishing Diamonds Excellent for concrete polishing edge work, these diamonds are designed to be used on the SASE EDGE PRO 180. Item Description Ideal Use 6" EDGEPRO SC60.500240 6 Polishing Resin Diamond Grey 50 Grit Removal of scratches left by metal bonds SC60.500241 6 Polishing Resin Diamond Black 100 Grit Used as the first step in polishing SC60.500242 6 Polishing Resin Diamond Blue 200 Grit Used for removal of 100 Grit scratches SC60.500243 SC60.500244 6 Polishing Resin Diamond Red 400 Grit 6 Polishing Resin Diamond White 800 Grit Typically used as the last step before dye and densifier are applied Provides a high shine, often the last step in retail stores SC60.500245 6 Polishing Resin Diamond Yellow 1500 Grit Provides a very high shine SC60.500246 6 Polishing Resin Diamond Green 3000 Grit Provides the highest shine PRODUCT CATALOG Page 26

Corner Polishing Corner Polishing Metal Bond Diamonds These corner polishing pads are ideal for corners and tight areas and are designed to be used on the SASE Corner Polisher. Item Description Ideal Use HOL.502901 Corner Metal Bond Diamond Green 60 Grit Removal of cream and sealers HOL.502902 Corner Metal Bond Diamond Black 120 Grit Removal of 60 Grit metal bond scratches HOL.502903 Corner Metal Bond Diamond Red 200 Grit Readies corners for polishing HOL.502904 Corner Metal Bond Diamond Yellow 400 Grit First polishing step of corners Corner Polishing Resin Bond Diamonds These corner polishing pads are ideal for corners and tight areas and are designed to be used on the SASE Corner Polisher. Item Description Ideal Use HOL.502905 Corner Resin Bond Diamond White 500 Grit Creates a high shine HOL.502906 Corner Resin Bond Diamond Blue 1000 Grit Creates a high shine HOL.502907 Corner Resin Bond Diamond Orange 3000 Grit Creates the highest shine Item SAS.FMM0510 Description Pad, 2pk Corner Polisher Corner Polisher on page 85 800.522.2606 SASECompany.com Page 27

Diamond Tooling Galaxy System Carrier pads available in 27, 21 & 20 TECHNICAL DATA Item Number: SSP.279002 Diameter 27 27" Capacity Holds Fifteen 3 (7.5 cm) Diamond Polishing Pads TECHNICAL DATA Item Number: SSP.219023 Diameter 21 21" Capacity Holds Ten 3 (7.5 cm) Diamond Polishing Pads TECHNICAL DATA 20" Item Number: SSP.209034 Diameter 20 Capacity Holds Ten 3 (7.5 cm) Diamond Polishing Pads GALAXY 3" Resin Pads SC30.500240 SC30.500241 SC30.500242 SC30.500243 SC30.500244 SC30.500245 SC30.500246 Grey 50 Grit Black 100 Grit Blue 200 Grit Red 400 Grit White 800 Grit Yellow 1500 Grit Green 3000 Grit PRODUCT CATALOG Page 28

Fast & Effective Rejuvenation 800.522.2606 SASECompany.com Page 29

Diamond Tooling 5 IN Cupwheels The 5 cup wheels are excellent for coatings removal and aggregate exposure of concrete surfaces, and are used on the SASE SC50 and all other industry 5 hand grinders. ITEM DESCRIPTION IDEAL USE SC50.900612 SC50.900611 5" PCD WÜLF Series Non- Threaded 5" PCD WÜLF Series Threaded 5" Removal of thick mil coatings and self levelers SC50.900608 5 18 Segment Cup Wheel Threaded For stock removal of concrete and mastics, rubbers, epoxies, and other coatings SC50.900609 5 T-Segment Cup Wheel Threaded For stock removal of concrete and mastics, rubbers, epoxies, and other coatings SC50.900610 SC50.900810 SC50.900811 SC50.900812 5 Arrow Segment Cup Wheel Threaded 5 Hybrid Resin Filled Coarse Threaded 5 Hybrid Resin Filled Medium Threaded 5 Hybrid Resin Filled Fine Threaded Aggressive removal of thin to medium coatings Ideal for light surface prep or for polished concrete edge work to expose minimal aggregate, while leaving a smooth profile and blending edges Ideal for light surface prep or for polished concrete edge work, leaving a smooth profile and blending edges Ideal for polished concrete edge work, leaving a smooth profile and blending edges SC50.900620 5" S-Segment Turbo 25 Grit Threaded SC50.900711 5 Diamond Cluster Cup Wheel Medium Grit Fast aggressive removal of paints, epoxies and glue PRODUCT CATALOG Page 30

5 Inch Cupwheels Our advanced technology 3 step edge wheel polishing system with outstanding finishes. This system will reduce your time by up to 50% compared with conventional methods. ITEM DESCRIPTION IDEAL USE 5" - 5/8-11 Arbor SC50.900702C 5 QUIKCUT Edge Wheel Coarse Grey 40 Grit For stock removal of concrete and mastics, rubbers, epoxies, and other coatings SC50.900701M 5 QUIKCUT Edge Wheel Medium Blue 80 Grit For stock removal of concrete and mastics, rubbers, epoxies, and other coatings SC50.900700F 5 QUIKCUT Edge Wheel Fine Yellow 200 Grit Aggressive removal of thin to medium coatings SC50.900699E 5" QUIKCUT Edge Wheel Extra Fine Orange 400 Grit Thin mil removal, polishing and blending Our most advanced technology, a three step edge wheel polishing system with outstanding finishes. Reduces your time by up to 50% compared with conventional methods. ITEM DESCRIPTION IDEAL USE 6" - 15mm Arbor $80 SC60.500303C 6" QUIKCUT Edge Wheel Coarse Grey 40 Grit For stock removal of concrete and mastics, rubbers, epoxies, and other coatings SC60.500302M 6" QUIKCUT Edge Wheel Medium Blue 80 Grit For stock removal of concrete and mastics, rubbers, epoxies, and other coatings SC60.500301F 6" QUIKCUT Edge Wheel Fine Yellow 200 Grit Aggressive removal of thin to medium coatings SC60.500300E 6" QUIKCUT Edge Wheel Extra Fine Orange 400 Grit Thin mil removal, polishing and blending 800.522.2606 SASECompany.com Page 31

Diamond Tooling PRODUCT CATALOG Page 32

7 Inch Cupwheels The 7 cup wheels are excellent for coatings removal and aggregate exposure of concrete surfaces. They are used on the SASE SC70 and other industry 7 hand grinders. Item Description Ideal Use 7" SC70.900613 SC70.900607 SC70.900614 SC70.900615 SC70.900605 SC70.900619 7 6 PCD Segment WÜLF Series Non-Threaded 7 6 PCD Segment WÜLF Series Threaded 7 10 Segment Arrow Configuration Non- Threaded 7 10 Segment Arrow Configuration Threaded 7 14 Segment T Configuration Non-Threaded 7 14 Segment T Configuration Threaded Removal of thick mil coatings and self levelers Fast, aggressive thin to medium mil coatings removal Light prep work SC70.900600 SC70.900617 7 24 Segment Turbo Non-Threaded 7 24 Segment Turbo Threaded Prep SC70.900603 SC70.900618 7 12 Segment Turbo Non-Threaded 7 12 Segment Turbo Threaded Aggressive prep SC70.900601 SC70.900606 7 12 Segment Single Row Non-Threaded 7 12 Segment Single Row Threaded Aggressive prep SC70.900602 7 24 Segment Double Row Non-Threaded Prep SC70.900604 SC70.900608 7 18 Segment 9 Long, 9 Short Non-Threaded 7 18 Segment 9 Long, 9 Short Threaded Thin mil removal SC70.900616 SC70.900620 7" 42 Segment Turbo 16 Grit Threaded 7" 42 Segment Turbo 24 Grit Threaded Aggressive Prep SC70.900714 7 Diamond Cluster Cup Wheel Medium Grit Fast aggressive removal of paints, glue and epoxies Our most advanced technology, a three step edge wheel polishing system with outstanding finishes. Reduces your time by up to 50% compared with conventional methods. ITEM DESCRIPTION IDEAL USE 7" - 5/8-11 Arbor SC70.850802C 7 QUIKCUT Edge Wheel Coarse Grey 40 Grit For stock removal of concrete and mastics, rubbers, epoxies, and other coatings SC70.850801M 7 QUIKCUT Edge Wheel Medium Blue 80 Grit For stock removal of concrete and mastics, rubbers, epoxies, and other coatings SC70.850800F 7 QUIKCUT Edge Wheel Fine Yellow 200 Grit Aggressive removal of thin to medium coatings SC70.850799E 7 QUIKCUT Edge Wheel Extra Fine Orange 400 Grit Thin mil removal, polishing and blending 800.522.2606 SASECompany.com Page 33

Diamond Tooling Ideal for polishing concrete and overlays. Designed to prevent scratching while polishing concrete. 5" Xenith pads for use on SASE SC50 and other 5" hand grinders ITEM HOL.2008115 DESCRIPTION 5" Xenith Pad 30 Grit 5" HOL.200811 5" Xenith Pad 50 Grit HOL.200812 5" Xenith Pad 100 Grit HOL.200813 5" Xenith Pad 200 Grit HOL.200814 5" Xenith Pad 400 Grit HOL.200815 5" Xenith Pad 800 Grit HOL.200816 5" Xenith Pad 1500 Grit HOL.200817 5" Xenith Pad 3000 Grit 6" Xenith pads for use on SASE Edge Pro 180 ITEM HOL.200833 DESCRIPTION 6" Xenith Pad 50 Grit 6" HOL.200834 6" Xenith Pad 100 Grit HOL.200835 6" Xenith Pad 200 Grit HOL.200836 6" Xenith Pad 400 Grit HOL.200837 6" Xenith Pad 800 Grit HOL.200838 6" Xenith Pad 1500 Grit HOL.200939 6" Xenith Pad 3000 Grit 8" Xenith Pads for use on SASE PDG 5000, PDG 6000 and other industry grinders ITEM HOL.3008505 DESCRIPTION 8" Xenith Pad 30 Grit 8" HOL.300850 8" Xenith Pad 50 Grit HOL.300851 8" Xenith Pad 100 Grit HOL.300852 8" Xenith Pad 200 Grit HOL.300853 8" Xenith Pad 400 Grit HOL.300854 8" Xenith Pad 800 Grit HOL.300855 8" Xenith Pad 1500 Grit HOL.300863 8" Xenith Pad 3000 Grit PRODUCT CATALOG Page 34

Diamonds Pads ITEM HOL.3008645 DESCRIPTION 9" Xenith Pad 30 Grit 9" 9" Xenith Pads for use on the 500, 780 and other industry grinders HOL.300864 9" Xenith Pad 50 Grit HOL.300865 9" Xenith Pad 100 Grit HOL.300866 9" Xenith Pad 200 Grit HOL.300867 9" Xenith Pad 400 Grit HOL.300868 9" Xenith Pad 800 Grit HOL.300869 HOL.300870 9" Xenith Pad 1500 Grit 9" Xenith Pad 3000 Grit ITEM HOL.3008715 HOL.300871 HOL.300872 HOL.300873 HOL.300874 HOL.300875 HOL.300876 HOL.300877 DESCRIPTION 11" 11" Xenith Pad 30 Grit 11" Xenith Pad 50 Grit 11" Xenith Pad 100 Grit 11" Xenith Pad 200 Grit 11" Xenith Pad 400 Grit 11" Xenith Pad 800 Grit 11" Xenith Pad 1500 Grit 11" Xenith Pad 3000 Grit 11" Xenith Pads for use on the SASE PDG 8000, 800 series, 820, G320, 3200 and other industry 32" grinders ITEM HOL.3008785 HOL.300878 HOL.300879 HOL.300880 HOL.300881 HOL.300882 HOL.300883 HOL.300884 DESCRIPTION 17" 17" Xenith Pad 30 Grit 17" Xenith Pad 50 Grit 17" Xenith Pad 100 Grit 17" Xenith Pad 200 Grit 17" Xenith Pad 400 Grit 17" Xenith Pad 800 Grit 17" Xenith Pad 1500 Grit 17" Xenith Pad 3000 Grit 17" Xenith Pads for use on PDG 9500 Plus 800.522.2606 SASECompany.com Page 35

Diamond Tooling MAINTENANCE & REPAIR For use on SASE PDG 8000 ITEM DESCRIPTION 11" HOL.400880 HOL.400881 HOL.400882 HOL.400883 HOL.400884 HOL.400885 HOL.400886 11" Xenith Pad MR 50 Grit 11" Xenith Pad MR 100 Grit 11" Xenith Pad MR 200 Grit 11" Xenith Pad MR 400 Grit 11" Xenith Pad MR 800 Grit 11" Xenith Pad MR 1500 Grit 11" Xenith Pad MR 3000 Grit 11" TRIFECTA ITEM DESCRIPTION IDEAL USE SSP.118100 11" TRIFECTA Pad 3000 Grit Use dry for the ultimate shine, use wet to remove guard. (sold separately) TRIFECTA HD ITEM DESCRIPTION IDEAL USE SSP.HD.027 27" TRIFECTA HD Pad Use dry for the ultimate shine, use wet to remove guard. For use on SASE 27" high speed burnisher. (sold 2 per box) SSP.HD.011 SSP.HD.005 11" TRIFECTA HD Pad 5" TRIFECTA HD Pad Use dry for the ultimate shine, use wet to remove guard. (sold separately) Use for the ultimate shine. For use on PDG 3000 Edger. PRODUCT CATALOG Page 36

Diamond Pads These pads will mount to a high speed burnisher to restore shine or burnish in guard. Use our TRIFECTA pads for a full rejuvenation of a polished concrete floor & remove imperfections left by the polishing process. ITEM DESCRIPTION IDEAL USE Sold 2 per box SSP.27.40100 27 TRIFECTA PAD 100 Grit Used for burnishing and restoration under 27 burnishers SSP.27.40400 27 TRIFECTA PAD 400 Grit Used for burnishing and restoration under 27 burnishers SSP.27.40800 27 TRIFECTA PAD 800 Grit Used for burnishing and restoration under 27 burnishers SSP.27.41500 27 TRIFECTA PAD 1500 Grit Used for burnishing and restoration under 27 burnishers SSP.27.43000 27 TRIFECTA PAD 3000 Grit Used for burnishing and restoration under 27 burnishers 27" ITEM DESCRIPTION IDEAL USE 24" SSP.24.30100 24 TRIFECTA PAD 100 Grit Used for burnishing and restoration under 24 burnishers SSP.24.30400 24 TRIFECTA PAD 400 Grit Used for burnishing and restoration under 24 burnishers SSP.24.30800 24 TRIFECTA PAD 800 Grit Used for burnishing and restoration under 24 burnishers SSP.24.31500 24 TRIFECTA PAD 1500 Grit Used for burnishing and restoration under 24 burnishers SSP.24.33000 24 TRIFECTA PAD 3000 Grit Used for burnishing and restoration under 24 burnishers ITEM DESCRIPTION IDEAL USE 20" SSP.20.20100 20 TRIFECTA PAD 100 Grit Used for burnishing and restoration under 20 burnishers SSP.20.20400 20 TRIFECTA PAD 400 Grit Used for burnishing and restoration under 20 burnishers SSP.20.20800 20 TRIFECTA PAD 800 Grit Used for burnishing and restoration under 20 burnishers SSP.20.21500 20 TRIFECTA PAD 1500 Grit Used for burnishing and restoration under 20 burnishers SSP.20.23000 20 TRIFECTA PAD 3000 Grit Used for burnishing and restoration under 20 burnishers ITEM DESCRIPTION IDEAL USE 17" SSP.17.10100 17 TRIFECTA PAD 100 Grit Used for burnishing and restoration under 17 burnishers SSP.17.10400 17 TRIFECTA PAD 400 Grit Used for burnishing and restoration under 17 burnishers SSP.17.10800 17 TRIFECTA PAD 800 Grit Used for burnishing and restoration under 17 burnishers SSP.17.11500 17 TRIFECTA PAD 1500 Grit Used for burnishing and restoration under 17 burnishers SSP.17.13000 17 TRIFECTA PAD 3000 Grit Used for burnishing and restoration under 17 burnishers 800.522.2606 SASECompany.com Page 37

Diamond Tooling Sapphire Pads These pads are for daily cleaning on polished concrete floors. Sold 5 per box ITEM SAS.00013 SAS.00014 SAS.00016 SAS.00017 SAS.00020 DESCRIPTION 13" Sapphire Pad 14" Sapphire Pad 16" Sapphire Pad 17" Sapphire Pad 20" Sapphire Pad SureShine Heat Pads ITEM DESCRIPTION IDEAL USE SSP.27HEAT 27" SureShine Pad (5 per pack) 27" & 24" Used on floors where a matte finish is desired. For use on SASE 27" high speed burnisher Sold 5 per box SSP.24HEAT 24" SureShine Pad Used on floors where a matte finish is desired. Burnisher Pads ITEM DESCRIPTION IDEAL USE SSP.27.005 27" White Burnisher Pad (5 per pack) 27" Used to clean floor between polishing steps and after applying SASE Protect Plus or polish guard under 27" burnishers Sold 5 per box PRODUCT CATALOG Page 38

Maintenance Pads 800.522.2606 SASECompany.com Page 39

Chemical ITEM DESCRIPTION SAS.SFS.D1 Densifier Low Solids Coverage Sq. ft.. 500 Min. - 750 Max (per gallon) D1 Densifier is a water-based low VOC (1g/L), premium-hybrid multi-silicate densifier that increases surface hardness, reduces dusting, and improves stain resistance for new or existing concrete and cement terrazzo floors. Unlike typical densifiers, SASE SFS D1 penetrates concrete surfaces at different levels ensuring hardening of the wear surface regardless of porosity. ITEM DESCRIPTION SAS.SFS.D2 Densifier Coverage Sq. ft.. 750 Min. - 1,000 Max (per gallon) D2 Densifier is a water-based low VOC (1g/L), premium-hybrid multi-silicate densifier that increases surface hardness, reduces dusting, and improves stain resistance for new or existing concrete and cement terrazzo floors. Unlike typical densifiers, SASE SFS D2 penetrates concrete surfaces at different levels ensuring hardening of the wear surface regardless of porosity. ITEM SAS.SFS.PROSLCT Guard Coverage Sq. ft.. 2,250 Min. - 2,500 Max (per gallon) DESCRIPTION PROTECTSELECT is a low VOC (5g/L) premium-hybrid copolymer, film forming protective treatment water-based sealer that enhances sheen and stain resistance for concrete and cement terrazzo floors. The product can be burnished quickly for a high shine, resists scuffing and surface abrasion, and provides water and stain resistance. PRODUCT CATALOG Page 40

Chemical ITEM SAS.SFS.R3 Penetrating Sealer (Solvent Based) Coverage Sq. ft.. 3,000 Min. - 3,500 Max (per gallon) ITEM SAS.SFS.R3WB Penetrating Sealer (Water Based) Coverage Sq. ft.. 1,250 Min. - 1,500 Max (per gallon) DESCRIPTION SPR3 is a premium-hybrid solvent-borne low VOC (5g/L), clear penetrating oil and water repellent. SASE SFS SPR3 penetrates untreated or densified concrete and hard surfaces, such as marble and stone, without leaving topical residues. SAS.SFS.SR3.01 1 Gallon DESCRIPTION SPR3WB is a premium-hybrid water-borne low VOC (39g/l), clear penetrating oil and water stain inhibitor. SASE SFS SPR3 WB penetrates untreated or densified concrete and hard surfaces, such as marble and stone, without leaving topical residues. ITEM DESCRIPTION SAS.32CLEAN Polished Concrete Cleaner (32 oz) Mix 4 oz. per 30 gallon tank or 2 oz. per 15 gallon tank SASE Cleaner is a low VOC maintenance cleaner specifically designed for any concrete floor. SASE cleaner removes dirt, grease and other contaminants while preserving the concrete surface ITEM SAS.SFSAID GrindAid Coverage Sq. ft.. 200 Min. - 400 Max (per gallon) DESCRIPTION SASE GrindAid is a water based, pretreatment, rapid surface preparation agent used for the initial cut on hard, dense concrete and also helps with exposing large aggregate faster than dry only or standard wet methods. GrindAid also helps by dramatically increasing the productivity of lower-grit diamond tooling. GrindAid achieves this by suspending concrete solids away from the surface for diamond tools to achieve maximum efficiency. This then shortens the project time-line, reduces labor costs and extends the life of diamond tooling. GrindAid is also unique in that it can be used in wet and dry grinding methods 800.522.2606 SASECompany.com Page 41

Chemical SASE Color Chart Stocked Colors PRODUCT CATALOG Page 42

Concrete Dye Color Chart SASE Liquid Concentrate Dye Colors COLOR ITEM NUMBER COLOR ITEM NUMBER LEMON SAS.LEM1G (5G) DARK BROWN SAS.DAB1G (5G) RAW SIENNA SAS.RAS1G (5G) GREY SAS.GRE1G (5G) COYOTE BROWN SAS.CBR1G (5G) WINE SAS.WIN1G (5G) BEACH SAS.BEACH1G (5G) PLUM SAS.PLU1G (5G) TUSCAN RED SAS.TUR1G (5G) BAHAMA SEA SAS.BAS1G (5G) BURNT SIENNA SAS.BUS1G (5G) ROYAL BLUE SAS.ROB1G (5G) RUST SAS.RUS1G (5G) CHARCOAL SAS.CHA1G (5G) RED SAS.RED1G (5G) EMERALD SAS.EME1G (5G) SEDONA SAS.SED1G (5G) TEAL SAS.TEA1G (5G) RED WOOD SAS.REW1G (5G) EVERGREEN SAS.EVE1G (5G) MAHOGANY SAS.MAH1G (5G) STEEL BLUE SAS.STB1G (5G) LIGHT BROWN SAS.LIB1G (5G) BLACK SAS.BLA1G (5G) MEDIUM BROWN SAS.MEDB1G (5G) SASE Powder Dye Colors COLOR ITEM NUMBER COLOR ITEM NUMBER LEMON SAS.PLEM1G (5G) DARK BROWN SAS.PDAB1G (5G) RAW SIENNA SAS.PRAS1G (5G) WINE SAS.PWIN1G (5G) COYOTE BROWN SAS.PCBR1G (5G) PLUM SAS.PPLU1G (5G) BEACH SAS.PBEACH1G (5G) BAHAMA SEA SAS.PBAS1G (5G) TUSCAN RED SAS.PTUR1G (5G) ROYAL BLUE SAS.PROB1G (5G) BURNT SIENNA SAS.PBUS1G (5G) CHARCOAL SAS.PCHA1G (5G) RUST SAS.PRUS1G (5G) EMERALD SAS.PEME1G (5G) SEDONA SAS.PSED1G (5G) TEAL SAS.PTEA1G (5G) RED WOOD SAS.PREW1G (5G) EVERGREEN SAS.PEVE1G (5G) MAHOGANY SAS.PMAH1G (5G) STEEL BLUE SAS.PSTB1G (5G) LIGHT BROWN SAS.PLIB1G (5G) BLACK SAS.PBLA1G (5G) 800.522.2606 SASECompany.com Page 43

Chemical PRODUCT CATALOG Page 44

Concrete Dye Color Chart Water Based Stock COLOR ITEM NUMBER COLOR ITEM NUMBER PENETRATING AGENT AP.MP1 PATRIOT BLUE AP.ABABL5G BLACK AP.ABBLAC5G RAM SIENNA AP.ABRASI5G BURNT SIENNA AP.ABBUSG SADDLE BROWN AP.ABSABR5G CARMEL AP.ABBBUSG SLATE BLUE AP.ABSLBL1G DARK SADDLE BROWN AP.ABSDBR1G(5) TERRA COTTA AP.ABTERR5G MAHOGANY AP.ABBMAHOG TURQUOISE AP.ABTURQ1G MAROON AP.MAR1G WALNUT AP.ABWALN5G MIDNIGHT BLACK AP.ABBMIBL5G Colors will drop ship same day (order before 3:30pm est.) 800.522.2606 SASECompany.com Page 45

Planetary Diamond Grinders PDG 9500 Plus PDG9000.03 The SASE PDG 9500 Plus is designed with a low profile and expanded grinding head that allows you to grind under toe kicks and retail store shelving. SPECIFICATIONS Motor Dimensions Other Power 15 kw 20 hp Length 86 in 218 cm Grinding Width 36 in 91 cm Current 40 AMP Width 32 in 81 cm Variable Speed 600-1750 RPM Voltage 460 V Phases 3 ph FEATURES Height Weight (with two 50 lb removable weights) 47 in 119 cm 1265 lbs 574 kg Grinding Pressure 660 lbs 299 kg Low profile expanded grinding head allows you to grind under toe kicks and retail store shelving Removable shroud allowing it to be converted back to standard 32 in grinder Unit ships with interchangeable (3) standard 11 in QCS plates and (3) 17 in QCS plates Connects to SASE Bull 1250 industrial vacuum for dust-free operation PRODUCT CATALOG Page 46

Planetary Diamond Grinders PDG 8000P (Propane) PDG8000.06 The SASE PDG 8000P contains a powerful 31 horsepower Kawasaki propane motor. This allows the operator to operate without the hassles that come with using power cords. With three perfectly balanced grinding heads it allows for easy operation while following the contour of the floor. SPECIFICATIONS Motor Dimensions Other Power Kawasaki Propane 31 hp FEATURES Length Width Height Weight (with two 50 lb cantilever weights) 86 in 218 cm 32 in 81 cm 47 in 119 cm 1,370 lbs 622 kg Grinding Width Variable Speed Grinding Pressure Built for low maintenance New pin style handle bar providing increased maneuverability in tight spaces Newly designed cantilever weights are easily adjusted into four different positions Includes both metal bond QCS and Resin Flex Plates Connects to SASE Bull 1250(Propane) industrial vacuum for dust-free operation 30 in 76 cm 600-1750 RPM 720 lbs 327 kg 800.522.2606 SASECompany.com Page 47

Planetary Diamond Grinders PDG8100.03 (460 V) PDG R8 (Remote Control) Is the most perfectly balanced, quiet, easy to operate and smoothest running grinder on the market. With three powerful, flexible heads, it has three points of contact to follow the contour of the floor with precision. SPECIFICATIONS Motor Dimensions Other Power 15 kw 20 hp Current 30 AMP Voltage 460 V Phases 3 ph FEATURES Length Width Height Weight (with two 50 lb removable weights) 86 in 218 cm 32.5 in 83 cm 47 in 119 cm 1265 lbs 574 kg Grinding Width Variable Speed Grinding Pressure 30 in 76 cm 850-2000 RPM 755 lbs 342kg Includes a wireless remote that controls all functions, including maneuvering Wireless remote has backup wired tether cord Powerful 20 HP motor Perfectly balanced and built for low maintenance Includes QCS plates Connects to SASE BULL 1250 industrial vacuum for dust-free operation 50 power cord; one end consisting of a pig tail, the other end contains a female twistlock plug PRODUCT CATALOG Page 48

Planetary Diamond Grinders PDG 8000 Is the most perfectly balanced, quiet, easy to operate and smoothest running grinder on the market. With three powerful, flexible heads, it has three points of contact to follow the contour of the floor with precision. PDG8000.01 (230 V) PDG8000.03 (460 V) PDG8000.02 (380 V) ( European version) ITEM NUMBER PDG.8A11000 RECOMMENDED ACCESSORIES Front wheel assembly kit SPECIFICATIONS Power Current Voltage Phases Motor 15 kw 20 hp 60 AMP 40 AMP 40 AMP 230 V 460 V 380 V 3 ph FEATURES Length Width Height Weight (with two 50 lb cantilever weights) Dimensions 84 in 213 cm 32.5 in 83 cm 72 in 183 cm 1180 lbs 535 kg Grinding Width Variable Speed Grinding Pressure Powerful 20 HP motor New front and rear LED lights positioned to increase visibility and productivity Includes QCS plates Connects to SASE BULL 1250 industrial vacuum for dust-free operation Serpentine belt systems with belt tensioner Smart hose design and coupling provide greater suction Completely sealed head; stands up to the toughest jobs, even with excessive dust or slurry 50 power cord; one end consisting of a pig tail, the other end contains a female twistlock plug Other 30 in 76 cm 600-1750 RPM 660 lbs 299 kg 800.522.2606 SASECompany.com Page 49

Planetary Diamond Grinders PDG 6000 Single Phase PDG600001.50 (230 V) A highly versatile 25" floor grinder that is small enough to maneuver in more confined spaces, yet powerful enough to provide superior performance for concrete polishing and surface prep. SPECIFICATIONS Power Current Voltage Phases Motor 15 kw 10 hp 50 AMP 230 V 1 ph FEATURES Length Width Height Weight (with two 33 lb removable weights) Dimensions 53 in 132 cm 26 in 66 cm 44 in 112 cm 546 lbs 248 kg Grinding Width Variable Speed Grinding Pressure Other 25 in 63.5 cm 600-1750 RPM 330 lbs 150 kg Ideal for open or confined spaces Includes two 33 lbs removable weights Connects to SASE BULL 300 industrial vacuum for dust-free operation Three powerful and flexible heads provide three points of contact to best follow the contour of the floor No special tools are required to perform routine maintenance Serpentine belt systems with belt tensioner Low profile handle Smart hose design and coupling provide greater suction 50 power cord; one end consisting of a pig tail, the other end contains a female twistlock plug PRODUCT CATALOG Page 50

Planetary Diamond Grinders PDG 6000 A highly versatile 25" floor grinder that is small enough to maneuver in more confined spaces, yet powerful enough to provide superior performance for concrete polishing and surface prep. PDG6000.01 (230 V) PDG6000.03 (460 V) PDG6000.02 (380 V) ( European version) SPECIFICATIONS Power Current Voltage Phases Motor 7.5 kw 10 hp 40 AMP 230 V 460 V 380 V 3 ph FEATURES Length Width Height Weight (with two 33 lb removable weights) Dimensions 53 in 132 cm 26 in 66 cm 44 in 112 cm 546 lbs 248 kg Grinding Width Variable Speed Grinding Pressure Other 25 in 63.5 cm 600-1750 RPM 330 lbs 150 kg Ideal for open or confined spaces Perfectly balanced and built for low maintenance Includes two 33 lbs removable weights Connects to SASE BULL 300 industrial vacuum for dust-free operation Three powerful and flexible heads provide three points of contact to best follow the contour of the floor No special tools are required to perform routine maintenance Serpentine belt systems with belt tensioner Low profile handle Smart hose design and coupling provide greater suction 50 power cord; one end consisting of a pig tail, the other end contains a female twistlock plug 800.522.2606 SASECompany.com Page 51

Planetary Diamond Grinders PDG 5000 PDG5000.01 (230V) A highly versatile 20 floor grinder with a compact, yet powerful design. This allows it to fit easily through all standard doorways and is easily maneuverable for retail and residential spaces. The head and motor are detachable, allowing it to be transported up stairways in two easy to carry pieces. SPECIFICATIONS Motor Dimensions Other Power 3.7 kw 5 hp Current 30 AMP Voltage 230 V Phases 1 ph 3 ph FEATURES Length Width Height Weight (with two 26 lb removable weights) 54 in 137 cm 21in 53 cm 34 in 86 cm 372 lbs 169 kg Grinding Width Variable Speed Grinding Pressure 20 in 51 cm 850-2000 RPM 218 lbs 99 kg Includes magnetic QCS plates Connects to SASE BULL 300 industrial vacuum for dust-free operation The head and motor can easily be removed from the frame for easier transportation Locking adjustment for angle of handle, no pins to lose Can achieve almost 90 tilt back Three powerful and flexible heads provide three points of contact to best follow the contour of the floor No special tools are required to perform routine maintenance Uses same base plates as the PDG 6000 (200mm or 7 3/4 ) Includes two 26 lbs weights PRODUCT CATALOG Page 52

Planetary Diamond Grinders PDG 5000 (Propane) PDG5000.04 SPECIFICATIONS Motor Dimensions Other Power Gx 390 Honda engine FEATURES Length Width Height Weight (with two 26 lb removable weights) 54 in 137 cm 21 in 53 cm 34 in 86 cm 430 lbs 169 kg Grinding Width Variable Speed Grinding Pressure 20 in 51 cm 850-1700 RPM 220 lbs 99 kg Built for low maintenance Operator friendly control panel Standard feature - flexible grinding heads Includes both metal bond QCS and resin bond flex plates Connects to SASE Bull industrial vacuums for dust-free operation 800.522.2606 SASECompany.com Page 53

Planetary Floor Grinders PDG 3000 Toe-Kick Edger PDG3000.03 The PDG 3000 has an adjustable X & Y axis and can easily grind under toe kicks. Simplifies working with edges which saves time and it is designed ot operate while standing, avoiding wear on your knees and back. SPECIFICATIONS Motor Power 3 hp Current Voltage Phases 15 AMP 460 V 3 ph FEATURES Length Width Height Weight (with two 39 lb removable weights Variable speed True planetary drive system Able to polish / grind under toe kicks Easy to set grinding head, turns both left and right Wheels tilt left, right or straight 40 lbs of removable weight Dimensions 36 in 91 cm 17 in 43 cm 38 in 97 cm 258 lbs 117 kg Grinding Width Variable Speed Grinding Pressure Other 11 in 28 cm 850-2000 RPM 130 lbs 59 kg PRODUCT CATALOG Page 54

Floor Grinders PDG SHG230 Single Headed SAS.SHG230 Folded height 27 inches SPECIFICATIONS Motor Dimensions Other Power 1.1 kw 1.5 hp Current 15 AMP Voltage 110 V Phases 3 ph FEATURES Length Width Height Weight 36 in 91 cm 16 in 41 cm 43 in 109 cm 84 lbs 38 kg Grinding Width Variable Speed Grinding Pressure 9 in 23 cm 1690 RPM 66 lbs 30 kg Great for working in those tight small areas Integrated, dust port for dust free grinding Uses 4 pieces of standard SASE QCS tooling Hooks up to a SASE Bull 300 industrial vacuum Removable - durable rubber shroud allows you to grind up to the wall Handle folds in seconds, ensuring easy transport 800.522.2606 SASECompany.com Page 55

Floor Grinders Edge Pro 180 DG.EDG180.02 Is an aggressive, sleek, upright edge grinder made to grind and polish around corners, edges, and tight areas. With a 6 grinding path and extreme versatility, this machine can do it all. SASE offers a full line of 6 metal bond and resin bond tooling to meet all your needs. ITEM NUMBER DG1472 DG1492 NB.13.109 RECOMMENDED ACCESSORIES Velcro plate Disc velcro plate Screw for velcro plate attachment SPECIFICATIONS Motor Dimensions Other Power 15 kw 1 hp Length 55 in 140 cm Grinding Width 6 in 15 cm Voltage 110 V Width 15 in 38 cm Variable Speed 600-1750 RPM Phases 3 ph Height 43 in 109 cm Grinding Pressure 53 lbs 24 kg FEATURES Weight 120 lbs 54 kg Variable speed control Directional motor control keeps head against the wall Pivoting rear wheels allows grinding parallel to the wall Weights are positioned directly over grinding head for maximum down pressure Comes with two 16 lb weights Connects to a SASE Bull industrial vacuum for dust free operation PRODUCT CATALOG Page 56

Grinders Spyder SC7000SPY An affordable edge solution for smaller surface prep jobs. Simplifies working with edges which saves time and it is designed ot operate while standing, avoiding wear on your knees and back. SPECIFICATIONS An affordable edge solution for smaller surface prep jobs. Simplifies working with edges Motor which saves time and it is designed Dimensions to operate while standing, Power avoiding wear 1 hp on your knees and Length back. 28 in 71 cm Variable Speed Other 8,500 RPM Current 40 AMP Width 21.5 in 55 cm Voltage 110 V Height 38 in 95.5 cm FEATURES Weight 46 lbs 21 kg Ideal for surface prep on edges and in confined spaces Aggressive upright floor prep machine Guide handle allows control and pressure application to the center of the tool Halogen headlight Exclusive floating mechanism for maneuverability over uneven surfaces Includes your choice of 7 in diamond cup wheel Hinged convertible 7 in shroud allows for grinding right to vertical surfaces 800.522.2606 SASECompany.com Page 57

Planetary Diamond Grinders EQUIPMENT PACKAGE ITEM DESCRIPTION QUANTITY PDG.8000.03 SASE PDG 8000 Grinder 460 V 1 VAC.BULL1250.460V SASE BULL 1250 Dust Collector 460 V 1 HOL.905218 SASE Flexplate 3 AIW.6X4CORD 100 Extension Cord (Special Order) 1 COATINGS REMOVAL PACKAGE ITEM DESCRIPTION QUANTITY HOL.201014 Plate sliver, 270mm with PCD & Wear Bar 3 HOL.201012 Plate gold, 270mm with PCD 3 HOL.200997QCS WÜLF Series PCD Split DS 9 HOL.904150 WÜLF Tungsten Scraper Holder w / Scraper Squares 9 HOL.502602QCS Metal Bond Diamond Blue 16 Grit DS QCS 9 HOL.5026025QCS Metal Bond Diamond Blue 25 Grit DS QCS 9 CONCRETE POLISHING PACKAGE ITEM DESCRIPTION QUANTITY HOL.502603QCS Metal Bond Diamond Blue 40 Grit DS QCS 9 HOL.502604QCS Metal Bond Diamond Blue 80 Grit DS QCS 9 HOL.502605QCS Metal Bond Diamond Blue 150 Grit DS QCS 9 HOL.502711 Hockey Pucks 100 Grit 36 HOL.502712 Hockey Pucks 200 Grit 36 HOL.502713 Hockey Pucks Red 400 Grit 36 HOL.300705 Triton X-SERIES Resin Bond Diamond White 800 Grit 36 HOL.300706 Triton X-SERIES Resin Bond Diamond Yellow 1500 Grit 18 ADDITIONAL ACCESSORIES ITEM DESCRIPTION QUANTITY HOL.905218 Flex Plate System Complete, 3 Puck Style 3 SSP.118100 11 Trifecta SPT 3 Yellow Pad 6 PDG.80082.00 Plate, QCS Diamond Carrier Steel, 270mm 3 PDG.80067.NM Dust Skirt, Rubber 1 SAS.SCRATCH Concrete Hardness Scratch Test 1 SAS.METER01 Gloss Meter 1 SAS.CS8365C Twistlock 50A, 230 v 3P Male 1 SAS.CS8165C Twistlock 50A, 460 v 3P Male 1 SAS.PIGTAIL Reverse Polarity Pigtail *this is for the Bull 1250 and 460v 1 PRODUCT CATALOG Page 58

Equipment Package EQUIPMENT PACKAGE ITEM NUMBER DESCRIPTION QUANTITY PDG.6000.03 SASE PDG 6000 Grinder 460V 1 VAC.BULL300 SASE BULL 300 Dust Extractor 110V 1 SPECIAL ORDER 100 Extension cord 1 COATINGS REMOVAL PACKAGE ITEM NUMBER DESCRIPTION QUANTITY HOL.200510 WÜLF PCD Quarters DS with Wear Bar 9 HOL.200993 WÜLF PCD Quarters DS 9 HOL.200997QCS WÜLF Series PCD Split DS 9 HOL.904150 WÜLF Tungsten Scraper Holder w / Scraper Squares 9 HOL.502602QCS Metal Bond Diamond Blue 16 Grit DS QCS 9 HOL.5026025QCS Metal Bond Diamond Blue 25 Grit DS QCS 9 CONCRETE POLISHING PACKAGE ITEM DESCRIPTION QUANTITY HOL.502603QCS Metal Bond Diamond Blue 40 Grit DS QCS 9 HOL.502604QCS Metal Bond Diamond Blue 80 Grit DS QCS 9 HOL.502605QCS Metal Bond Diamond Blue 150 Grit DS QCS 9 HOL.502711 Hockey Pucks 100 Grit 36 HOL.502712 Hockey Pucks 200 Grit 36 HOL.502713 Hockey Pucks Red 400 Grit 36 HOL.300705 Triton X-SERIES Resin Bond Diamond White 800 Grit 36 HOL.300706 Triton X-SERIES Resin Bond Diamond Yellow 1500 Grit 18 ADDITIONAL ACCESSORIES ITEM DESCRIPTION QUANTITY PDG.60076.00 Plate, QCS Diamond Carrier Complete, Steel, Rigid 3 PDG.60062.00 Dust Skirt, Rubber 1 SAS.SCRATCH Concrete Hardness Scratch Test 1 SAS.METER01 Gloss Meter 1 SAS.CS8365C Twistlock 50A, 230 v 3P Male* 1 SAS.CS8165C Twistlock 50A, 460 v 3P Male* 1 HOL.905193 Foam Riser, 200MM velcro PDG6k 3 PDG.60071.02 Plate, Tooling Lippage/PDG6K 3 SAS.PIGTAIL Reverse Polarity Pigtail *this is for the Bull 1250 and 460v 1 800.522.2606 SASECompany.com Page 59

Planetary Diamond Grinders 17" or 423mm Plates ITEM NUMBER DESCRIPTION IDEAL USE SAS.200141 17" Velcro Plate for 3" Pucks SASE PDG 9500 SAS.100231 17" Xenith Plate Assembly SASE PDG 9500 11" OR 270MM Plates ITEM DESCRIPTION IDEAL USE SAS.2000121 SAS.300104 Xenith complete plate assembly, 11" or 270mm Plate, Flex Plate 270mm (10 5/8") For PDG 8000, HTC 800 For resin bond diamonds; flexibility of plate allows you to reach low spots when polishing. Fits SASE PDG 8000, 800 series, G320, 3200 & other industry 32" grinders PDG.80082.00 Plate, QCS Diamond Carrier Steel, 270mm (10 5/8 ) Use with QCS for mounting metal bond diamonds fits SASE PDG 8000 PDG.80183.10 Plate, Magnetic QCS Adapters Fits SASE PDG 8000 HOL.905210 Plate, QCS Diamond Carrier Aluminum, 270mm (10 5/8") Use with QCS for mounting metal bond diamonds. Fits 800 series, G320, 3200 & other industry 32" grinders HOL.906312 Plate, Magnetic QCS Adapters Fits HTC 800 HOL.905218 Plate, Flex Plate System Complete 270mm (10 5/8") For mounting 3" puck style resin bonds. Fits SASE PDG 8000, 800 series, G320, 3200 & other industry 32" grinders PDG.HA001.20 Flexhead with red spring Fits HTC 800 Classic & 950 RX PRODUCT CATALOG Page 60

Plates ITEM DESCRIPTION IDEAL USE HOL.905160 Plate, Bolt On Metal Bond Aluminum, 270mm (10 5/8") Use to mount bolt-on style metal bond diamonds. Fits SASE PDG 8000, 800 series, G320, 3200 & other industry 32" grinders HOL.905125 Plate, Diamond carrier Aluminum 270mm (10 5/8 ) For mounting 3 puck style diamonds using the Flex Plate System (see Item HOL.905218) HOL.905192 Foam Riser with Velcro 270mm (10 5/8") Replacement foam riser with velcro for Flex Plate System (see Item HOL.905218) HOL.905196 Plate, Aluminum Base 270mm (10 5/8") Replacement base plate for Flex Plate System (see HOL.905218) HOL.906216 Complete Xenith Flex Plate Assembly 270mm (10 5/8 ) For mounting 11 Xenith pads to SASE PDG 8000, 800 series, G320, 3200 & other industry 32" grinders HOL.905130 Plate, Diamond Carrier Aluminum, 270mm (10 5/8 ) For mounting puck style diamonds fits SASE PDG 8000 & 800 series grinders 9" or 240/230mm Plates ITEM DESCRIPTION IDEAL USE HOL.905220 Plate, Flex Plate System Complete, 240mm (9 3/8") Fits Diamatic 780 HOL.902240 Plate, Aluminum Base 230mm (9") Replacement base plate for Flex Plate System (see HOL.905221) HOL.905221 Flex plate system, 3" puck style 230mm Fit 650* HOL.905020 HOL.905214 HOL.600100 Plate, Aluminum Recessed 3" Puck Style 240mm (9 3/8") Plate, QCS Metal Bond 240mm (9 3/8") Assembly, Flex plate system 200mm for 3" pucks For mounting 3" puck style resin bonds. Fits Diamatic 780 Use with Quick Change System for mounting metal bond diamonds. Fits Diamatic 780 Fits PDG 6000 & 5000 800.522.2606 SASECompany.com Page 61

Planetary Diamond Grinders ITEM DESCRIPTION IDEAL USE HOL.907830 Plate, QCS Magnetic Adapters Fits Diamatic 780 HOL.901240 Plate, Bolt-On Metal Bond 240mm (9 3/8") Use to mount bolt-on style metal bond diamonds. Fits Diamatic 780 HOL.905212 Plate, QCS Diamond Carrier, Aluminum 230mm (9") Use with Quick Change System for mounting metal bond diamonds. Fits 500, 650, other industry 24-25" grinders HOL.907315 Plate, QCS Magnetic Adapters for HTC Fits HTC 500 & 650 HOL.905180 Plate, 230mm (9") Fits 500 and 650. For mounting 2 post and puck style resins HOL.905191 Foam Riser 230mm (9") Fits 500 & 650 7" or 200/185mm Plates ITEM DESCRIPTION IDEAL USE HOL.905216 Plate, Diamond Carrier 185mm (7 ¼") Use with QCS for mounting metal bond diamonds. Fits Diamatic 535 & 580 HOL.907340 Plate, QCS Magnetic Adapters for Diamatic Fits Diamatic 535 & 580 HOL.905010 Plate, Aluminum Recessed 3" Puck Style 185mm (7 ¼") For mounting 3" puck style resin bonds. Fits Diamatic 535 & 580 HOL.901185 Plate, Bolt-On Metal Bond 185mm (7 ¼") For mounting bolt-on metal bond or PCD Diamonds. Fits Diamatic 535 & 580 HOL.600100 Plate, Flex Plate System 200mm For SASE PDG 6000 & 5000 PDG.50040.00 Plate, QCS Diamond Carrier Steel, 200mm (7 3/4") Use With Quick Change System for mounting Metal Bond Diamonds to SASE PDG 6000 & PDG 5000 PDG.50160.20 Plate, with Magnetic QCS Adapters Fits SASE PDG 6000 & PDG 5000 PRODUCT CATALOG Page 62

Plates ITEM DESCRIPTION IDEAL USE PDG.50015.00 Base Plate, 200mm (7 3/4") Fits SASE PDG 6000 & PDG 5000 HOL.905193 Foam Riser, Velcro 200mm (7 3/4") Fits SASE PDG 6000 & PDG 5000 PDG.60071.02 Plate, Complete Tooling Lippage w/ Velcro 200mm (7 3/4" ) Fits SASE PDG 6000 & PDG 5000 SAS.20005 HOL.905234 Plate, Velcro Xenith Assembly Plate, Xenith Pad Fits SASE PDG 6000 & PDG 5000 SAS.238100 Plate, QCS for Husqvarna Fits PG 820 SAS.259000 Plate, QCS Magnetic Adapters for Husqvarna Fits PG 820 SAS.268700 Plate, QCS Magnetic Adapters for Husqvarna Fits PG 680 & PG 530 SAS.249200 Plate, QCS Adapters for Husqvarna Fits PG 680 & PG 530 HOL.2000148 Plate, COMBIFLEX Fits SCANMASKIN 800 SAS.800955 Plate, COMBIFLEX with Magnetic QCS Adapters Fits SCANMASKIN 800 HOL.2000146 Plate, COMBIFLEX Fits SCANMASKIN 650i SAS.800745 Plate, COMBIFLEX with Magnetic QCS Adapters Fits SCANMASKIN 650i HOL.600350 Terrco aluminum QCS plate Fits Terrco grinders 800.522.2606 SASECompany.com Page 63

Planetary Diamond Grinders Adapters ITEM DESCRIPTION IDEAL USE HOL.200099 Frankfort Style Diamond Tool Holder for Eagle Machine Fits Eagle machine HOL.200099A Frankfort Style Diamond Tool Holder with SASE QCS Fits Eagle machine HOL.905227 Adapter, for Lavina to SASE QCS Fits Lavina machine HOL.905227A Adapter, Lavina with SASE QCS Fits Lavina machine HOL.904132 Adapter, Universal QCS Metal Bond Mounts to most diamond carrier plates, allows for use of QCS on most machines SAS.904175 Adapter, Universal QCS Magnetic Mounts to most diamond carrier plates, allows for use of QCS on most machines HOL.600205QCS Adapter, STI with SASE QCS Mounts to STI grinders HOL.902120 Adapter, Assembled tear drop adapter with velcro plate For mounting post style or 2" mini puck resin bond diamonds to QCS plate SAS.500117 SAS.LIPADP Adapter replacement, Vulcanized velcro 2" flex plate Adapter, Assembled with Vulcanized velcro plate QCS lippage 3" puck holder Mounts to SASE flex plate & tear drop adapter Mounts to 3" puck style resins, SC30 SAS.10017 Adapter replacement Mounts to 3" puck adaptor HOL.904143 Holder, 3" QCS For mounting 3" puck style resins, SC30 SAS.ADPNON Adapter, 3" hockey puck without lippage, velcro For mounting 3" puck style resins HOL.905197 3" Foam Riser For mounting 3" puck style resins NB.13.127 Screw For use with velcro plate & 2" flex plate NB.04.08 Screw For use with velcro plate with tear drop PRODUCT CATALOG Page 64

Dust Skirts Standard Dust Skirts ITEM DESCRIPTION FITS MACHINES PDG.80067.00 Dust Skirt, Rubber PDG 8000 PDG.60062.00 Dust Skirt, Rubber PDG 6000 PDG.50082.00 Dust Skirt, Rubber PDG 5000 HOL.U118941 Dust Skirt, Rubber Diamatic 780 HOL.780125 Brush, Dustcap Diamatic 780 HOL.U11925 Dust Skirt, Rubber Diamatic 535 HG.10405 Dust Skirt For 800 Grinder 800,G320 HG.10406 Dust Skirt For 500 Grinder 500,G240 HG.10407 Dust Skirt For 650 650 HG.10408 Dust Skirt For 950 950 Bush Hammer Dust Skirts ITEM DESCRIPTION IDEAL USE PDG.80286.00 Dust skirt For PDG 9500 PDG.90080.07 Dust skirt, bush hammer For PDG 8000 PDG.60062.07 Dust skirt, bush hammer For PDG 6000 PDG.50082.07 Dust skirt, bush hammer For PDG 5000 Non-Marking Dust Skirts ITEM DESCRIPTION IDEAL USE PDG.8006700.NM Dust skirt, non-marking For PDG 8000 HG.10405.NM Dust skirt, non-marking Fits 800 grinder 800.522.2606 SASECompany.com Page 65

Industrial Vacuums SASE Bull 1250 EBS (Propane) VAC.BULL.1250.PROEBS The SASE Bull 1250 PRO EBS is a propane powered industrial vacuum. This allows the operator to operate without the use of the hassles of using power cords. Like the other Bull 1250s it too is constructed of heavy gauge steel making it the most durable industrial vacuum in the industry. This industrial vacuum is powerful enough to handle the work load of any industry 3 or 4 head grinder. ITEM NUMBER RECOMMENDED ACCESSORIES NWA.00090 Sock filters (20) NWA.800EBS SAS.0009510 VAC.10104 NWA.80026 HEPA filter Elongated bags Holder, elongated cone Clip holder for cone SPECIFICATIONS Motor Dimensions Other Power 603cc FS Series Length Width 62 in 157.5 cm 30 in 76 cm Air Flow Lift 388 CFM 132 in 335 cm Height 71 in 180 cm FEATURES Weight 696 lbs 316 kg Over 62 sq/ft. of filter area Secondary HEPA filtration Manual filter shaker system which is extremely durable, dependable and easy to use For use anywhere that power is not available or where power cords are not permitted Low emissions EPA & CARB 3-way catalytic muffler lowers CO, HC and NOx emissions PRODUCT CATALOG Page 66

Industrial Vacuums SASE Bull 1250 EBS VAC.BULL.1250.460V VAC.BULL.1250.230V VAC.BULL.1250.380 (EUROPEAN VERSION) The SASE Bull 1250 EBS is a three phase industrial vacuum with an elongated bag system. The EBS consists of a 60' continuous bagging system. This allows for the easy and environmentally smart disposal of the concrete dust. For maximum performance SASE recommends that you use a Bull preseparator to create a 3-stage filtration system. This industrial vacuum is powerful enough to handle the work load of any industry 3 or 4 head grinder. ITEM NUMBER RECOMMENDED ACCESSORIES NWA.00090 Sock filters (20) NWA.800EBS SAS.0009510 VAC.10104 NWA.80026 NWA.90032 NWA.90024 HEPA filter Elongated bags Holder, elongated cone Clip holder for cone 440V 3 ph w/soft start 220V 3 ph w/soft start SPECIFICATIONS Motor Dimensions Other Voltage 460 V 230 V 380 V Length 48.5 in 122 cm Air Flow 388 CFM Phases 3 ph 3 ph 3 ph Width 27 in 69 cm Lift 132 in 335 cm Height 70 in 178 cm FEATURES Weight 500 lbs 227 kg Elongated bags with over 42 sq/ft. of filter area Quiet - only 78 db Manual filter shaker system 8.5 HP regenerative motor Soft start Constructed of 14 gauge steel for longevity in industrial use 800.522.2606 SASECompany.com Page 67

Industrial Vacuums SASE Bull 300 EBS VAC.BULL300EBS.02 (2" HOSE) VAC.BULL300EBS.03 (3" HOSE) The most powerful 110 Volt industrial vacuum available in the polished concrete and surface prep industry. ITEM NUMBER VAC.NZ2WAND VAC.NZ2TOOL RECOMMENDED ACCESSORIES 2" Vac wand 2" Vac floor nozzle VAC.NZ2.0IRD VAC.HS3.00060 VAC HS2.00000 2" Vac wand and floor nozzle 3" Hose clear with yellow, sold by the foot 2" Hose yellow flexible, sold by the foot SAS.300.SURGE Surge Protector for Bull 300 ITEM NUMBER RECOMMENDED ACCESSORIES NWA.00090 Sock filters (12) NWA.300EBS SAS.0009510 VAC.10104 NWA.80026 HEPA filter Elongated bags Holder, elongated cone Clip holder for cone SPECIFICATIONS Motor Dimensions Other Power 1 phase Length 38 in 97 cm Voltage 110 V Width 25 in 64 cm Height 67 in 170 cm Weight 334 lbs 152 kg FEATURES The industry s most powerful 110 volt vacuum Elongated bag system Filters can be cleaned by manually shaking the fiter cleaning lever Contains 12 sock filters Secondary backup filtration system (HEPA) 320 CFM, utilizing 34 sq ft. of filter area Continuous duty operation Includes 25' of 3" or 2" hose Constructed of 14 guage steel for longevity in industrial use PRODUCT CATALOG Page 68 Air Flow Lift 320 CFM 70 in 178 cm

Industrial Vacuums SASE Bull 240 EBS VAC.BULL240.EBS The Bull 240 EBS is a powerful single phase industrial vacuum with an elongated bag system. The industrial vacuum has a twostage filter unit with HEPA filters. The ideal industrial vacuum to connect to a smaller grinder or for doing edge work. ITEM NUMBER VAC.240.01 VAC.240.02 SAS.0009510 VAC.240.18 VAC.240.06 RECOMMENDED ACCESSORIES Filter, Anti static conical HEPA filter, 2nd stage Elongated bags Holder, elongated cone Nylon strap for holder SPECIFICATIONS Motor Dimensions Other Power 1 phase Length 31 in 79 cm Air Flow 224 CFM Voltage 120 V Width 22.5 in 57 cm Lift 86 in 218 cm Height 47.5 in 121 cm Weight 181 lbs 82 kg FEATURES Industrial quality 120 volt vacuum Elongated bag system Cartridge filter can be cleaned by manual purging Contains one cartridge primary filter and two secondary HEPA filter Equipped with 25' of 2" hose and floor wand Heavy gage steel construction for industrial use 800.522.2606 SASECompany.com Page 69

Industrial Vacuums Bull 150 VAC.BULL150 A small, compact vacuum designed to perform under the rigorous conditions imposed when grinding concrete. It is ideal to use with hand tools when grinding concrete, preparing concrete surfaces and removing coatings. ITEM NUMBER SAS.KRC.107 SAS.KRC.102 SAS.KRC.103 SAS.KRC.104 SAS.KRC.105 RECOMMENDED ACCESSORIES Bags, Fleece Filter (5 per pack) HEPA filter Metal Suction Tube Replacement Hose Floor Nozzle SPECIFICATIONS Motor Dimensions Other Power 1.85 hp Length 18 in 46 cm Air Flow 150 CFM Voltage 120 V Width 18 in 46 cm Lift 70 in 178 cm Height 39 in 99 cm FEATURES Weight 42.6 lbs 19 kg Eliminates time-consuming work disruptions for filter cleanings and prolongs the filter life by up to 3 times Fully automatic pulse filter cleaning system Compact flat pleated HEPA filter resides outside the tank, thereby maximizing tank capacity Remove / replace the HEPA filter without opening the tank 12 gallon tank size Ideal for use with hand tools Includes: 8ft of 1.5" hose, 24 ft. cord, floor nozzle, crevice nozzle, filter bag, 2 suction tubes, cuff to dust shroud PRODUCT CATALOG Page 70

Industrial Vacuums Bull Preseparator NWA.10100 A cyclonic action that will capture up to 80% of the dust particles prior to traveling on to the dust extractor, thus reducing the frequency of emptying and increasing the filter life on the dust extractor. When used with the Bull 1250 EBS, it becomes a 3-stage filtration system. SPECIFICATIONS Length Width Height Weight Dimensions 43 in 109 cm 29 in 74 cm 68 in 173 cm 159 lbs 72 kg FEATURES Connects between the grinder and the vac to add a third stage filtration process Extends the industrial vacuum filter life Uses SASE elongated vacuum bags Grounding chain to reduce static electricity Heavy duty casters Minimizes down time to clean the filters and remove the dust for increased productivity Constructed of 14 guage steel for durability Low to ground hose connections to prevent the unit from tipping over 800.522.2606 SASECompany.com Page 71

Industrial Vacuums Vacuum Nozzles ITEM NUMBER VAC.NZ2.TOOL DESCRIPTION 2 Floor Nozzle with Brush and Squeegee VAC.319183 Rubber Squeegee Blade Strip Set 20 VAC.319186 Brush Strip Set 20 SAS.WALETALE Attaches to any 2 vac hose to eliminate dust on the job site when pouring and mixing cementitious products VAC.NZ2.WAND 2" Wand, Single bend SAS.240CTOOL Floor wand kit for Bull 240C Vacuum Bags ITEM NUMBER DESCRIPTION IDEAL USE VAC.4436BAG 4-mil Bags Bull 1250 SAS.0009510 SASE Elongated Vacuum Bag (4 per box) 60' rolls Bull Preseparator, Bull 1250 EBS, Bull 300 EBS Bull 240C, T-75, & 86D SAS.KRC.107 Fleece filter (5 per pack) Bull 150 PRODUCT CATALOG Page 72

Industrial Vacuums Hose Cuffs & Camlocks ITEM NUMBER VAC.CF3.00000 VAC.CF2.0HOSE VAC.CF2.0TOOL VAC.CF2.00000 DESCRIPTION Cuff, 3" Hose To 3" Tool Cuff, 2" Hose To 2" Hose Cuff, 2 To 1.5" Tool Cuff, 2" to 2" tool VAC.CF1.50200 Cuff, 1.5" threaded to 2" slip for Bull 45 ITEM NUMBER DESCRIPTION VAC.101150.1 Plug, Machine Dust 3", for the Bull 300 VAC.10121 VAC.10117 Splitter, 3x2x2 Camlock, 3 Female x 3 Hose Shank Aluminum VAC.10111 Camlock, 3" Male x 3" Hose Shank for PDG 8000 & PDG 6000 VAC.10127 VAC.10113 VAC.10125 VAC.10123 Camlock, 3 Male x 2 Hose Shank Aluminum Camlock, 3" Female x 3 Hose Shank Plastic Camlock 3 Female x 2 Hose Shank Aluminum Camlock 3 Male x 3 Male Aluminum Coupler VAC.10116 Gasket For Female Coupler 3 VAC.10115 VAC.10114 VAC.10112 Dust Plug For Female Camlock Camlock, 3 Dust Cap Male Camlock, 3 Plastic Male Coupler Vacuum Connector ITEM VAC.YAD3x3x3 VAC.YAD3x2x2 DESCRIPTION 3" x 3" x 3" Y Connector 3" x 2" x 2" Y Connector 800.522.2606 SASECompany.com Page 73

Scarifiers SC12E SC.12.041 (460 V) SC.12.040 (230 V) SC.12.020 (Gas) SPECIFICATIONS Motor Dimensions Power 5 hp 5 hp 13 hp Length 52 in 132 cm Voltage 230 V 460 V Gas Width 22 in 56 cm Phases 3 ph 3 ph Gas Height 45 in 114 cm FEATURES Weight 350 lbs 159 kg The industry s most durable and productive scarifier Side access drum assembly for quick and easy cutter changes Heavy-duty hex shaft Sealed bearings and no exposed moving parts Equipped with an emergency stop safety cord Connects to SASE BULL 300 vac for dust-free operation Max Working Width Distance to Vertical Surface Other 12 in 30.5 cm 3 in 8 cm SC12E / VA30S (4-Shaft Drum) ITEM NUMBER DESCRIPTION 630.LT8.64/196 DRUM W/TCT CUTTERS (64/196) 630.LT12.72/180 DRUM W/TCT CUTTERS (72/180) 630.LRM.12/208 DRUM W/MILLING CUTTERS (12/208) 630.LRM.16/160 DRUM W/MILLING CUTTERS (16/160) 630.LRM.20/120 DRUM W/MILLING CUTTERS (20/120) 800.LT8.64/196 CUTTER SET OF TCT (64/196) 800.LT12.64/196 CUTTER SET OF TCT (64/196) 800.LRM.12/208 CUTTER SET OF MILLING (12/208) 800.LRM.16/160 CUTTER SET OF MILLING (16/160) 800.LRM.20/120 CUTTER SET OF MILLING (20/120) PRODUCT CATALOG Page 74

Scarifiers SC10E SC.10.040 (230 V) SC.10.042 (230 V) SC.10.044 (460 V) SC.10.020 (Gas) SPECIFICATIONS Motor Dimensions Power 5 hp 5 hp 13 hp 9 hp Length 39 in 99 cm Voltage 230 V 230 V 460 V Gas Width 18 in 46 cm Phases 1 ph 3 ph 3 ph Gas Height 45 in 114 cm Weight 240 lbs 109 kg FEATURES Ideal for small spaces, yet powerful enough for larger projects Compact for easy handling and transportation Side access drum assembly for quick and easy cutter changes Heavy-duty hex shaft Sealed bearings and no exposed moving parts Equipped with an emergency stop safety cord Connects to SASE BULL 300 vac for dust-free operation Max Working Width Distance to Vertical Surface Other 10 in 25 cm 2.5 in 6 cm ITEM NUMBER ITEM DESCRIPTION SC10E / VA25S (w / 9/16" Flail Shafts) 800.MS.189/00 SET OF STEEL (189/00) 652.0U.MS.189/00 DRUM OF STEEL (189/00) 800.MT8.81/108 SET OF TCT (81/108) 652.0U.MT8.81/108 DRUM OF TCT (81/108) 800.MRM.27/81 SET OF MILLING (27/81) 652.0U.MRM.27/81 DRUM OF MILLING (27/81) 800.522.2606 SASECompany.com Page 75

Scarifiers SC8E SC.08.040 (110 V, 1Ø) SC.08.042 (230 V, 1Ø) SC.08.044 (230 V, 3Ø) SC.08.046 (460 V, 3Ø) SC.08.020 (Gas) SPECIFICATIONS Motor Dimensions Power 2 hp 3 hp 3 hp 3 hp 5 hp Length 47 in 119 cm Voltage 110 V 230 V 230 V 460 V Width 14 in 36 cm Phases 1 ph 1 ph 3 ph 3 ph Gas Height 34 in 86 cm FEATURES Weight 92 lbs 42 kg Uncompromising performance in a small size Compact for easy handling and transportation Side access drum assembly for quick and easy cutter changes Heavy-duty hex shaft Sealed bearings and no exposed moving parts Equipped with an emergency stop safety cord Connects to SASE BULL 300 vac for dust-free operation Max Working Width Distance to Vertical Surface Other 8 in 20 cm 2 in 5 cm SC8E / FR200 ITEM NUMBER DESCRIPTION 800.SS.260/00 SET OF STEEL (260/00) 625.SS.260/00 DRUM OF STEEL (260/00) 800.ST5.72/100 SET OF TCT (72/100) 625.ST5.72/100 DRUM OF TCT (72/100) 800.SRM.20/100 SET OF MILLING (20/100) 625.SRM20/100 DRUM OF MILLING (20/100) PRODUCT CATALOG Page 76

Scarifiers Drums We carry a full line of drums and flail shafts for most walk-behind and truck grinders. 8 Scarifier Drums Item Number SC.08.500 8 Drum for FR200.SC8E Scarifier Item Number 65051 8 Drum for CPM8/SPS8 Scarifier 10 Scarifier Drums Item Number SC.10.505 10 Drum for VA25S/SC10E Scarifier Item Number 64251 10 Drum for CPM10/SPS10 Scarifier 12 Scarifier Drums Item Number SC.12.505 12 Drum for VA30S/SC12E Scarifier 8 Flail Shafts Item Number SC.08.510 8 Drum Flail Shaft Item Number 20150 1/2 Diameter Flail Shaft for CPM8/SPS8 Drum Item Number 90150 9/16 Diameter Flail Shaft for CPM8/SPS8 Drum 10 Flail Shafts Item Number SC.10.510 10 Drum Regular Flail Shaft Item Number SC.10.520 10 Drum Super Flail Shaft Item Number 21490 CPM10/SPS10 Drum Flail Shaft 12 Flail Shafts Item Number SC.12.500 12 Drum Flail Shaft Spacers ITEM FITS MACHINES 625.06.09A SC8E Drums 625.06.916 SC10E Drums 630.03.06 SC12E Drums 625.07.916 SPS/CPM 615.08.80 Truck Grinders 800.522.2606 SASECompany.com Page 77

Scarifiers Tungsten Cutters Used for surface prep and concrete grinding applications for the removal of hard coatings. ITEM DESCRIPTION ID OD THICKNESS FITS MACHINES 615.01.07 Small 5pt 16mm (5/8 ) 40mm (1 9/16 ) 6mm (15/64 ) SC8E, FR200, FS200, CPM8, SPS8 615.01.14 Small 6pt 15.2mm (19/32 ) 44mm (1 47/64 ) 6mm (15/64 ) SC8E, FR200, FS200, CPM8, SPS8 615.08.31 Medium 8pt 18.3mm (23/32 ) 56.37mm (2 7/32 ) 6mm (15/64 ) SC10E, VA25S, CPM10, SPS10 615.08.30 Medium 8pt (special order) 25.2mm (63/64 ) 55.6mm (2 3/16 ) 6mm (15/64 ) RM320 620.01.13 Large 8pt 30mm (1 3/16 ) 81mm (3 3/16 ) 7.8mm (5/16 ) SC12E, VA30S 620.01.14 Large 12pt 26mm (1 1/32 ) 80mm (3 9/64 ) 8mm (5/16 ) Truck Grinder, SC12E, VA30S 630.03.10 Large 12pt 30.16mm (1 3/16 ) 77.79mm (3 1/16 ) 7.94mm (5/16 ) Truck Grinder 630.03.13 Large 12pt 33.02mm (1.30 ) 80mm (3 9/64 ) 7.84mm (5/16 ) Truck Grinder Milling Cutters Used for the removal of thick to thin mil coatings. ITEM DESCRIPTION ID OD THICKNESS FITS MACHINES 615.01.11 Small 16mm (5/8 ) 40 (1 9/16 ) 22.23mm (7/8 ) SC8E, FR200, FS200 644.01.13 Medium 18mm (23/32 ) 57mm (2 1/4 ) 20mm (25/32 ) VA25S, SC10E, CPM8, CPM10, SPS10 630.03.08 Large 29.5mm (1 5/32 ) 80mm (3 9/64 ) 40mm (1 9/16 ) SC12E, VA30S 630.03.09 Large thin 29.5 (1 5/32 ) 80mm (3 9/64 ) 20mm (2 5/32 ) SC12E, Truck Grinder, VA30S PRODUCT CATALOG Page 78

Scarifiers Steel Cutters For removal of coatings for surface prep without damaging the underlying surface and road markings removal. ITEM DESCRIPTION ID OD THICKNESS FITS MACHINES 615.01.02 Angle Cutter 16mm (5/8 ) 41.12mm (1 5/8 ) 3.13mm (1/8 ) SC8E, FR200, FS200 615.01.04 Small 16mm (5/8 ) 41.13 (1 5/8 ) 3.25mm (1/8 ) SC8E, FS200, FR200, 644.04.06 Large 15.6mm (5/8 ) 50.13mm (1 31/32 ) 3.83mm (9/64 ) SC10E, VA25S, CPM10, SPS10 CHS.30.01 Large tooth 26.4mm (1 3/64 ) 75.5mm (2 31/32 ) 4.8mm (3/16 ) SC12E, Truck Grinders, VA30S CHS.30.02 Large Tooth 29.8mm (1 11/64 ) 75mm (2 61/64 ) 4mm (5/32 ) SC12E, Truck Grinders, VA305 Rotary Replacement cutter for most walk-behind and skid steer rotary grinders. ITEM DESCRIPTION FITS MACHINES 681.01.18 Individual Cutter 48 pins TLR7, PM Eraser, LNX8, SCR7, and X3 Triple Head Eraser 681.01.15 Set of 3 144 pins TLR7, PM Eraser, LNX8, SCR7, and X3 Triple Head Eraser 800.522.2606 SASECompany.com Page 79

Floor Scraper SASE Cyclone OEM.CYCLONE The battery powered ride-on floor scraper that was developed to meet the demands of today s contractor. The cyclone offers all of the power and production of a propane powered machine, yet it runs quieter with zero emissions and fumes. Weighing in at 2,800 pounds and travel speeds up to 350 ft. per minute, the SASE Cyclone will remove virtually all floor covering materials in a single pass. The Cyclone comes standard with a 230 volt charger. SPECIFICATIONS Motor Dimensions Other Power Battery Powered Length Width Height 51.5 in 131 cm 24.5 in 62 cm 55 in 140 cm Speed Removable Weight 350 ft. per min 720 lbs 326 kg Weight 2800 lbs 1270 kg FEATURES Most efficient battery powered floor scraper Triple blade action to maneuver, angle & pivot the scraper blade Fits through standard doorways and on elevators Comes standard with 230 volt charger Single joystick control for speed, steering & direction Up to 12 hour run time on a single full charge Ideal for the removal of VCT, laminates and carpet Remove up to 6 batteries at 120 lbs ea to transport unit. Replace batteries before starting the unit PRODUCT CATALOG Page 80

Floor Scraper SASE Twister OEM.TWISTER The most productive ride-on floor scraper in the industry. When it comes to tough removal jobs or the need for speed, there simply is no machine that will compare. The SASE Twister is built with ample horsepower and weighs over 4,200 lbs. The hydrostatic drive system combined with a patented blade positioning mechanism make this floor scraper a flooring removal powerhouse. SPECIFICATIONS Motor Dimensions Other Power FORD Propane 58 hp Length Width Height 62 in 157 cm 26 in 66 cm 72 in 183 cm Speed Removable Weight 500 ft. per min 2017 lbs 915 kg Weight 4200 lbs 1905 kg FEATURES Ideal for heavy-duty flooring removal Triple blade action to maneuver, angle and pivot the scraper blade Compact design maneuvers through hallways with ease Powerful 58 HP Ford 1.6 liter propane engine Single joystick control for speed, steering, and direction Ideal for the removal of VCT, hardwood, laminates, ceramic tile, rubberized coatings, carpet and more 800.522.2606 SASECompany.com Page 81

Floor Scraper SASE Hurricane OEM.HURRICANE Ride-on floor scraper offers the most versatility of all the machines we sell. It is compact enough to get into the smallest of rooms and elevators, yet heavy and powerful enough to handle all removal jobs. If you are looking for durability and performance, try this little powerhouse on your next flooring removal or surface prep job. SPECIFICATIONS Motor Dimensions Other Power Kohler Propane 25 hp Length Width Height 58 in 147 cm 25 in 64 cm 58 in 147 cm Speed Removable Weight 440 ft. per min 1494 lbs 678 kg Weight 2800 lbs 1270 kg FEATURES Triple blade action to maneuver, angle and pivot the scraper blade Compact design maneuvers through hallways with ease Powerful 25 HP Kohler propane engine Single joystick control for speed, steering, and direction Ideal for the removal of VCT, hardwood, laminates, rubberized coatings and carpet PRODUCT CATALOG Page 82

Floor Scraper SASE Lightning OEM.LIGHTNING The most cost effective ride-on floor scraper on the market! Weighing in at 1,950 pounds and powered by a robust 25 HP Kohler engine, this machine is a real workhorse. At only 26 wide and 51.5 long, the Lightning is small enough to fit into the tightest of places. SPECIFICATIONS Motor Dimensions Other Power Kohler Propane 25 hp Length Width Height 51.5 in 131 cm 26 in 66 cm 51 in 130 cm Speed Removable Weight 330 ft. per min 670 lbs 304 kg Weight 1950 lbs 885 kg FEATURES Most powerful and cost effective floor scraper in its class Triple blade action to maneuver, angle and pivot the scraper blade Compact design for tight spaces Powerful 25 HP Kohler propane engine Single joystick control for speed, steering and direction Ideal for the removal of VCT, hardwood and carpet 800.522.2606 SASECompany.com Page 83

Floor Scraper FLAT BLADES for removal of VCT and thin floor coverings. CARPET BLADES for removal of carpet. HEAVY DUTY BLADES for removal of thicker coatings, rubberized coverings and VCT. BLADE SIZE Flat Blades ITEM NUMBER Carpet Blades ITEM NUMBER Heavy Duty Blades ITEM NUMBER 4" XTFBL04 XTHDB04 6" XTFBL06 XTCBL06 XTHDB06 8" XTFBL08 XTCBL08 XTHDB08 9" XTFBL09 Made to order XTCBL09 10" XTFBL10 XTCBL10 XTHDB10 12" XTFBL12 XTCBL12 XTHDB12 13" XTFBL13 XTCBL13 14" XTFBL14 XTHDB14 15" XTFBL15 XTCBL15 XTHDB15 Made to order 16" XTFBL16 XTCBL16 18" XTFBL18 XTCBL18 XTHDB18 20" XTFBL20 XTCBL20 XTHDB20 Made to order 24" XTFBL24 XTCBL24 Made to order XTHDB24 Made to order 26" XTFBL26 Made to order XTCBL26 Made to order 28" XTCBL28 Made to order Accessories ITEM DESCRIPTION FITS MACHINE OEM.00TT2 Tile Tooth SASE Cyclone, Twister, Lightning*, Hurricane* OEM.00TTA Tile Tooth Holder SASE Cyclone, Twister, Lightning*, Hurricane* OEM.TWA001 Travel Dolly (Special Order) SASE Cyclone, Twister, Lightning, Hurricane * The recommended machines for the removal of tile are the Twister and Cyclone only PRODUCT CATALOG Page 84

Hand Grinders SC70 7 In Hand Grinder SC70.900000 Current Voltage Motor 15 AMP 110 V Other Disc Size 7 in 18 cm Tool Length 22 in 56 cm Variable Speed 8500 Hand held dustless grinder Ideal for edge work Hinged convertible shroud Vacuum port Loop handle Hooks to Bull150 Vacuum SC50 5 In Hand Grinder SC51.800104 Current Voltage Motor 15 AMP 110 V Other Disc Size 5 in 13 cm Tool Length 18.5 in 47 cm Variable Speed 600-3,000 Hand held dustless grinder Ideal for edge work Hinged convertible shroud Includes 5" rigid back up pad Hooks to Bull 150 Vacuum Corner Polisher SAS.FMM250 Current Voltage Motor 15 AMP 110 V Other Triangle Disc Size 3 in 13 cm Tool Length 12 in 30 cm Variable Speed 10,000-19,500 Ideal for finishing corners, around doorways, and stairways on your polished concrete job Variable-speed triangular sanding pad Oscillates between 10,000 RPM & 19,500 RPM Smooth, quiet operation Includes carrying case for corner polisher 800.522.2606 SASECompany.com Page 85

Needle Scalers SC49 SAS.SC49CS (3MM) SAS.SC49CS4 (4MM) Length Weight Dimensions 14.7 in 37 cm 11 lbs 5 kg PSI 75-100 Needles CFM 5.5 Other 49 medium (3mm) optional 35 coarse (4mm) Heavy-duty scaler works quickly for the toughest jobs Various needle sizes & configurations Optional shroud available SC28 SAS.SC28CS2 (2mm) SAS.SC28CS (3mm) SAS.SC28CS4 (4mm) Dimensions Length 16.5 in 42 cm Weight 6.5 lbs 3 kg BPM 3500 PSI 75-100 Needles CFM 4.3 Other 28 medium (3mm) 19 coarse (4mm) optional 65 fine (2mm) Lightweight but powerful to quickly clean & resurface metal & concrete Various needle sizes & configurations Optional shroud available SC28 (ANTI-VIBRATION) SAS.SC28AVS2 (2mm) SAS.SC28AVS (3mm) SAS.SC28AVS4 (4mm) Dimensions Length 16.5 in 42 cm Weight 7.5 lbs 3.4 kg BPM 2930 PSI 75-100 Needles CFM 4.3 Other 28 medium (3mm) 19 coarse (4mm) optional 65 fine (2mm) Lightweight but powerful to quickly clean & resurface metal & concrete Anti-vibration for less operator fatigue Various needle sizes & configurations Optional shroud available PRODUCT CATALOG Page 86

Accessories Needles ITEM DESCRIPTION FITS MODEL SAS.SC.036 Needles, 2mm Blunt End, 65/Set 34B and 28 SC28, SC28AVS, 34B, NP34 SAS.SC.037 Needles, 3mm Chisel Point 28/Set 34B and 28 SC28, SC28AVS, 34B, NP34 SAS.SC.038 Needles, 4mm Chisel Point 19/Set 34B and 28 SC28, SC28AVS, 34B, NP34 SAS.SC.039 Needles, 3mm Chisel Point, 49/Set 45B and 49 SC49, 45B SAS.SC.040 Needles, 4mm Chisel Point, 35/Set 45B and 49 SC49, 45B Needle Holders ITEM DESCRIPTION FITS MODEL SAS.SC.018 Holder, 2mm Needle 34 and 28 Series SC28, SC28AVS, 34B, NP34 SAS.SC.019 Holder, 3mm Needle 34 and 28 Series SC28, SC28AVS, 34B, NP34 SAS.SC.020 Holder, 4mm Needle 34 and 28 Series SC28, SC28AVS, 34B, NP34 SAS.SC.031 Holder, 3mm Needle 45 and 49 Series SC49, 45B SAS.SC.053 Holder, 4mm Needle 45 and 49 Series SC49, 45B Needle Brushes ITEM DESCRIPTION FITS MODEL 554.00.VC Shroud Complete, 34 and 28 Series SC28, SC28AVS, 34B, NP34 515.00VC Shroud Complete, 45 and 49 Series SC49, 45B Neelde Shrouds ITEM DESCRIPTION FITS MODEL 550.00.00 Brush, Long Vacuum 23 SC28, SC28AVS, 34B, B/NP 550.00.01 Brush, Short Vacuum 23 SC28, SC28AVS, 34B, B/NP 550.00.02 Brush, Vacuum SC49, 45B 800.522.2606 SASECompany.com Page 87

Chemical All-Spall 3 SASE All-Spall 3 is a rapid set, high strength low viscosity concrete repair material designed to repair spalled concrete, cracked concrete, and for filling pin holes and small surface defects prior to polishing. This two part, 1:1 system is 100% solids and can be easily hand mixed with cement, sand, grout and other materials to make seamless, amazing looking patches. ITEM SAS.ASPGZGOZ SAS.ASPSTGOZ SAS.ASPWMSOZ SAS.ASPMCHOZ SAS.ASPFRROZ SAS.ASPGTGOZ ITEM DESCRIPTION ALL-SPALL, GRIZZLY GREY, 22 OZ ALL-SPALL, STANDARD GREY, 22 OZ ALL-SPALL, WARMSTONE, 22 OZ ALL-SPALL, MOCHA, 22 OZ ALL-SPALL, FRENCH ROAST, 22 OZ ALL-SPALL, GAUNTLET GRAY, 22 OZ DESCRIPTION SAS.ASPKIT02 ALL-SPALL, KIT, 2 GAL SAS.ASPKIT10 ALL-SPALL, KIT, 10 GAL ITEM SAS.ASPGZG02 SAS.ASPSTG02 SAS.ASPWMS02 SAS.ASPMCH02 SAS.ASPFRR02 SAS.ASPGTG02 DESCRIPTION ALL-SPALL, GRIZZLY GREY, TINT PK, 2 GAL ALL-SPALL, STANDARD GREY, TINT PK, 2 GAL ALL-SPALL, WARMSTONE, TINT PK, 2 GAL ALL-SPALL, MOCHA, TINT PK, 2 GAL ALL-SPALL, FRENCH ROAST, TINT PK, 2 GAL ALL-SPALL, GAUNTLET GRAY, 2 GAL PRODUCT CATALOG ITEM SAS.ASPGZG10 SAS.ASPSTG10 SAS.ASPWMS10 SAS.ASPMCH10 SAS.ASPFRR10 SAS.ASPGTG10 Page 88 DESCRIPTION ALL-SPALL, GRIZZLY GREY, TINT PK, 10 GAL ALL-SPALL, STANDARD GREY, TINT PK, 10 GAL ALL-SPALL, WARMSTONE, TINT PK, 10 GAL ALL-SPALL, MOCHA, TINT PK, 10 GAL ALL-SPALL, FRENCH ROAST, TINT PK, 10 GAL ALL-SPALL, GAUNTLET GRAY, 10 GAL

Flo-Mender Concrete Repair SASE Flo-Mender 2 is a rapid set, high strength ultra-low viscosity urethane repair material. This two part, 1:1 system is 100% solids and designed for repairing cracks, spalled concrete surfaces, and rebuilding and repairing broken control joints quickly and easily. SASE Flo-Mender 2 is thin enough to penetrate cracks and spalls prefilled with sand. ITEM SAS.FMDGZGOZ SAS.FMDWMSOZ DESCRIPTION FLO-MENDER, GRIZZLE GREY, 22 OZ FLO-MENDER, WARMSTONE, 22OZ ITEM SAS.EZPGZGOZ SAS.EZPWMSOZ DESCRIPTION EZ-FILL PRO, GRIZZLE GREY, 22 OZ EZ-FILL PRO, WARMSTONE, 22OZ Flex Joint 85 SASE FlexJoint 85 is a moisture insensitive, self-leveling, non-staining, 100% solids, two component, 1:1 ratio, polyurea elastomer joint filler that exhibits exceptional UV resistance. FlexJoint 85 cures rapidly and consistently in application ranging from 30 to 130 F and is tack free in 5 minutes. ITEM SAS.FXJGZGOZ SAS.FXJSTGOZ SAS.FXJWMSOZ SAS.FXJMCHOZ SAS.FXJFRROZ SAS.FXJGTGOZ DESCRIPTION FLEX JOINT, GRIZZLY GREY, 22 OZ FLEX JOINT, STANDARD GREY, 22 OZ FLEX JOINT, WARMSTONE, 22 OZ FLEX JOINT, MOCHA, 22 OZ FLEX JOINT, FRENCH ROAST, 22 OZ FLEX JOINT, GAUNTLET GRAY, 22 OZ ITEM SAS.FXJKIT10 DESCRIPTION FLEX JOINT, KIT, 10 GAL ITEM SAS.FXJGZG10 SAS.FXJSTG10 SAS.FXJWMS10 SAS.FXJMCH10 SAS.FXJFRR10 SAS.FXJGTG10 DESCRIPTION FLEX JOINT, GRIZZLY GREY, TINT PK, 10 GAL FLEX JOINT, STANDARD GREY, TINT PK, 10 GAL FLEX JOINT, WARMSTONE, TINT PK, 10 GAL FLEX JOINT, MOCHA, TINT PK, 10 GAL FLEX JOINT, FRENCH ROAST, TINT PK, 10 GAL FLEX JOINT, GAUNTLET GRAY, 10 GAL 800.522.2606 SASECompany.com Page 89

Joint Fill & Floor Repair Joint Saw SAS.SAW10 Joint & Crack Chaser Saw SAS.SAW09 Swivel casters that lock for straight cuts or unlock for chasing cracks SPECIFICATIONS Motor Current 15 AMP Current Voltage 120 V Voltage Cutting Depth adjustable / 3 in max Cutting Depth Weight 70 lbs 32 kg Weight FEATURES Heavy Duty construction Dustless operation when used in conjunction with a SASE industrial vacuum Large 4" x 2" wheels Quick blade depth adjustment Blade lift and lowering arm Locking blade guard Accurate front guide arm (Includes optional chasing guard) Motor 15 AMP 120 V adjustable / 2 ⅛ in max 70 lbs 32 kg PRODUCT CATALOG Page 90

Saw Blades 7 IN Saw Blades ITEM DESCRIPTION IDEAL USE 7" SAS.SAW07.02 7 x 0.125 Vacuum Brazed Blade For joint cutting and removal SAS.SAW07.01 7 x 0.065 Standard Blade Joint cleaning SAS.SAW07.03 7 x 0.250 WideTuck Blade Cleaning out wide joints SAS.SAW07.04 7" x 0.250 V-Segment Tuck Point Blade Crack chasing cleans out cracks SAS.SAW07.05 7" Poly Ripper PCD Removal of existing joint compound 800.522.2606 SASECompany.com Page 91

Joint Fill & Floor Repair 8 In Heavy Duty Joint Shaver SAS.SHAVER Used to shave excess joint filler with ease. FEATURES Industrial quality and strength Angled and weighted head allows for extra leverage when shaving Tool can be flipped when one side of the razor becomes dull Takes an 8" blade Razor blade ( 10 per pack) SAS.RAZOR Soaper Pole SAS.SOAPER Used to apply a soap film to reduce staining of joint filler. FEATURES Get you off your knees Heavy duty Industrial quality and strength Holds two bars of soap PRODUCT CATALOG Page 92

SC Poly Pump 10 SC Poly Pump 10 SAS.PMP001 SAVE TIME & MONEY Reduces material cost by over 70% SPECIFICATIONS Motor Dimensions Other Power 1/2 HP DC Gear Motor Length 30 in 76 cm RPM 0-550 Voltage 90-130 Width 27 in 69 cm Torque 202 lbs 92 kg Amps 5.5 Height 38.5 in 98 cm FEATURES Weight 190 lbs 86 kg 6.7 gallon tanks easily accommodate 5 gallon pail of material Integrated battery / inverter / charger (8 hrs of use out of a single charge) Manifold clean-out valves simplify cleaning and make it easy to pump left over material back into buckets 15 ft. hoses with thumb switch for easy one person operation Heavy duty welded steel construction with a solid base and non marring casters prevent material from dripping onto the floor 800.522.2606 SASECompany.com Page 93

PRODUCT CATALOG Page 94

Concrete Repair Color Chart FLEXJOINT 85 FLO-MENDER 2 ALL-SPALL 3 EZ-FILL PRO STANDARD GREY SASE Signature Floor System has colors for matching joint fill and surface repair products. Grinding and polishing application of dyes or sealers, and the addition of aggregate can all affect the final appearance of the product. The colors shown are for representational purpose only. IRON ORE URBAN BRONZE GRIZZLE GRAY PORPOISE THUNDEROUS GAUNTLET GRAY SOFTWARE CITYSCAPE DOVETAIL GRAY MATTERS INTELLECTUAL GRAY BLACK FOX OUTERSPACE BLACK FRENCH ROAST BRAINSTORM TURKISH COFFEE TERRA BRUN BREVITY BROWN BRONZE COBBLE BROWN HIGH TEA WARMSTONE MOCHA CARDBOARD TATAMI TAN RELIC BRONZE EVERGREENS FLOWER POT GREAT FALLS NIFTY TURQUOISE Stocked Colors 800.522.2606 SASECompany.com Page 95

Miscellaneous Equipment Removal of All-Spall 3 PRODUCT CATALOG Page 96

Miscellaneous Equipment SC320 Scarifier / Shaver / Planner SC.12.300 The industry s largest and most aggressive concrete floor scarifer / shaver / planner. *Scarifier configuration special order *The standard recommended blade configuration is: 64 blades 63 3mm spacers 1 1mm spacer ITEM SC.12.520 SC.12.530 SC.12.540 SC.12.550 SAS.320BELT SC.12.560 SC.12.570 620.01.13 DESCRIPTION Diamond Drum w/no spacers or blades Diamond Blade 300mm or 12 (blades sold individually) 3mm Spacer 64 Drum (spacers sold individually) 1mm Spacer 1-2 Drum (spacers sold individually) Red Belt Scarifying Drum Scarifying Drum Shaft (6 per drum) TCT Cutters (1 set = 128 cutters) SPECIFICATIONS Motor Dimensions Other Power Voltage 17.5 kw 25 hp 460 V Length Width 45 in 114 cm 26 in 66 cm Weight w/o Drum 569 lbs 258 kg Phases 3 ph Height 116 in 295 cm Weight 779 lbs 353 kg FEATURES Easy change polarity at machine Vibration dampened handle and electrical controls to ensure reduced operator fatigue Lockable front caster for ease of movement around job site Floating side debris guards and automatic belt tensioner Max cutting width 12 using 64 blades Self-propelled 1 cutting depth 800.522.2606 SASECompany.com Page 97

Miscellaneous Equipment 27 IN High Speed Burnisher SAS.27BURNISHER SPECIFICATIONS Motor Dimensions Other Power RPM 1800 Kawasaki 18 12V Battery starter Length Width Weight 36 in 91 cm 50 in 127 cm 240 lbs 109 kg Burnishing Width 27 in pad 65.5 cm FEATURES Ultra low profile: 3 ¾" Solid steel body On board dust control Hose connects to SASE Bull 150 Two 13 lb. weights provide additional head pressure & heat generation Emissions monitor shuts down engine if CO levels rise PRODUCT CATALOG Page 98

High Speed Burnisher 27 IN WET High Speed Burnisher SAS.WET.27BURNISHER SPECIFICATIONS Motor Dimensions Other Power RPM 1800 Kawasaki 18 12V Battery starter Length Width Weight 36 in 91 cm 50 in 127 cm 355 lbs 161 kg Burnishing Width 27 in pad 65.5 cm FEATURES Ultra low profile: 3 ¾" Solid steel body Minimal dust without a vacuum Hose connects to SASE Bull 150 Two 13 lb. weights provide additional head pressure & heat generation Emissions monitor shuts down engine if CO levels rise 800.522.2606 SASECompany.com Page 99

Miscellaneous Equipment Horiba Ig320 Gloss Meter Provides instant readings for the gloss performance of your polished floor. No calculations are required. Simply take multiple readings and use the Average button to get your overall gloss reading. SAS.METER01 FEATURES Measurement Area Measurement Range Display Range Continual Use Time Other A must have for most new construction and retail work - gloss measurements are required in most technical data's Lightweight, compact body makes the unit easily transportable Provides real-time numerical displays of gloss levels using only the sample measurement Detects even the lowest levels of gloss No warm-up, one-touch test readings Measurement angle from 20 degrees to 60 degrees 12 x 6 mm oval 0 mm - 100.0 mm 0 mm - 199.9 mm 15 + hours Moh's Scratch Test SAS.SCRATCH FEATURES Use to determine concrete hardness Allows for proper tooling selection Kit includes 4 two-sided picks, a grinding stone & glass hardness plate with magnet for calibrating Microfiber Mop ITEM NUMBER SAS.MOPPOLE SAS.36MOP.FRAME SAS.36.MOPPAD SAS.MOPFRAME DESCRIPTION 70" Telescope Pole 36" Mop Frame 36" Microfiber Velcro Backed Pad 20" Mop Frame SAS.20.MOPPAD *Each item sold separately 20" Microfiber Velcro Backed Pad PRODUCT CATALOG Page 100

Miscellaneous Equipment Swissmex 2.4 Gallon Sprayer SAS.ACE.SPRAY Flow Rate (Depends on tip size) Other 4.2-12.6 gal/hr 16-47.5 liters/hr 40 MAX PSI FEATURES Sprayer comes with grey tip SASE also stocks a variety of sprayer tips Heavy duty construction grade Designed specifically for applying acetone based formulations, most alcohol & ammonia based products ITEM NUMBER AP.TXVK4 AP.TXVK6 AP.TXVK8 AP.TXVK10 AP.TXVK12 AP.TIP8027 DESCRIPTION Green Tip Red Tip Gray Tip Black Tip Brown Tip Tip Retainer Cup 30 In Heavy Duty Foam Rubber Squeegee SAS.MOPPOLE SAS.SQUEEGEE FEATURES 70 in telescope pole Effectively moves fine dust on concrete floors Use on troweled ground & smooth surfaces Move wet slurry for fast pick up Great for pushing water off of rain soaked slabs Cleans dust & dirt on finished floors 800.522.2606 SASECompany.com Page 101

Miscellaneous Parts Misc Parts for Repair Materials ITEM NUMBER DESCRIPTION FITS SAS.APP22OZ Applicator Tool 22oz Cartridge SAS.PMP002 Nozzle Poly Pump 10 SAS.PMP003 Blue Nozzle, Cartidge 22oz Cartidge SAS.PMP004 Flow Restrictor ASP, EZP SAS.PMP005 Flow Restrictor, Blue FMD SAS.PMP006 Nut, Manifold Poly Pump 10 ITEM NUMBER DESCRIPTION FITS SC.13239 Pully, Motor SC13 SAS.PMP008 Seal, Rebuild kit Poly Pump 10 SAS.PMP009 Gasket Poly Pump 10 SAS.PMP010 Pump Replacement Poly Pump 10 SAS.PMP011 Hose 15' Poly Pump 10 SAS.PMP012 Complete Manifold Poly Pump 10 SAS.PMP013 Tank Screen Poly Pump 10 SAS.PMP014 Screen Fitting Poly Pump 10 Belts *Belts are special ordered items ITEM DESCRIPTION FITS MACHINES PDG.83226.70 Belt green, 4/3VP 450 GATES PDG 8000P (propane) PDG.83226.30 Belt green, 3/3VP 450 GATES PDG 8000P (propane) PDG.80039.00 Belt, PK21 Bottom PDG 8000 PDG.80040.00 Belt, PK6 Middle PDG 8000 PDG.80041.00 Belt, PK10 Upper PDG 8000 PDG.60056.00 Belt, PK12 Bottom PDG 6000 PDG.60057.00 Belt, PK6 PTo Middle PDG 6000 PDG.60058.00 Belt, PK8 Top Belt PDG 6000 HG.10300 950 & 800 HDX Upper Belt 950 HDX 800 HG.10301 950 RX Lower Belt 950 HDX HG.10302 800 HDX Upper Belt 800 HDX HG.10304 800 Classic Upper Belt 800 Classic HG.10305 800 Classic Lower Belt 800 Classic HG.10306 800 HD&E Upper Belt 800 HD&E HG.10307 800 HD Lower Belt 800 HD HG.10308 800 E Lower Belt 800 E HG.10309 800 Old Upper Belt 800 HG.10310 800 Old Lower Belt 800 HG.10313 650 Upper Belt 650 HG.10314 650 Lower Belt 650 HG.10315 500 Upper New Hub 500 HG.10321 130 V Belt 130 HOL.U11928 535 Lower belt Diamatic 535 HOL.U11904 Belt, Middle Diamatic 535, 580, 720 HOL.U11924 Belt, Upper Diamatic 535, 580, 720 and 780 Pro HOL.U11952 Belt, Middle Diamatic 780 Ultra HOL.800403 Belt, Lower Diamatic 780 Ultra, 780 Pro HOL.U11905 Belt, Lower Diamatic 720, 580 HOL.U11980 Belt, Middle Diamatic 780 Pro PRODUCT CATALOG Page 102

Miscellaneous Parts SKF Bearings *special order item ITEM DESCRIPTION NUMBER REQUIRED FITS MACHINES HG.10200 6312 2RS-C3 800 HD 6 800 HD HG.10201 6314 2RS-C3 800 HD 1 800 HD HG.10202 6207 2RS-C3 800/650/950 5 800 HD, 650, 950 *HG.10203 6205 2RS-C3 500 old style 8 500 *HG.10204 6010 2RS-C3 500/800 old style 3 500, 800 HD *HG.10205 6005 2RS-C3 500 hub style 3 (Hub Style) or 4 (Old Style) HG.10206 6012 2RS-CS 500 main, both style 1 500 *HG.10207 6017 2RS-C3 800 CLASSIC HDX 2 800 Classic HG.10208 6004 2RS-C3 130 2 Seals 500 ITEM DESCRIPTION NUMBER REQUIRED FITS MACHINES HG.10209 VA-25 800 HD 3 800 HD HG.10210 20 By 35 By 7 TC 800 HD 3 800 HD HG.10211 60 By 75 By 8 TC 800 HD 3 800 HD HG.10212 20 By 47 By 7 TC 800 HD 3 800 HD Spring Sets ITEM DESCRIPTION NUMBER REQUIRED FITS MACHINES HG.10400 800 HD & E Spring Set Kit 3 Hole 3 800 HD, 800 E HG.10401 800 Classic Spring Set Kit 1 Hole 4 950 RX, 800 HDX HG.10409 800 Ultra Thick Spring Set Kit 3 Hole 3 800 HD, 800 E HG.10410 800 Ultra Thick Spring Set Kit 1-Hole 3 800 CLASSIC Shaft Journals ITEM DESCRIPTION NUMBER REQUIRED FITS MACHINES HG. 10501 800 HD Shaft Journal 3 800 HD Power Cords ITEM AIW.6X4CORD AIW.8X4CORD AIW.4X4CORD DESCRIPTION 6/4 Cord for 460 V 3-Phase Grinders and Dust Extractors 8/4 Cord for 230 V 3-Phase Grinders and Dust Extractors 4/4 Cord for distances >200 connections from the Grinder to the Dust Extractor 800.522.2606 SASECompany.com Page 103

Miscellaneous Parts Vacuum Filters & Parts ITEM DESCRIPTION FITS MACHINES NWA.00093 Inline Filter, Bull 300 Bull 300 NWA.00090 Sock Filter, Bull 300 Bull 300 NWA.80010 Sock Filter, Bull 1250 Bull 1250 NWA.80020 HEPA Filter, Bull 1250 Bull 1250 NWA.800EBS HEPA Filter, Bull 1250EBS Bull 1250EBS SAS.240.FILTER HEPA Filter cartdridge, Bull 240C Bull 240C SAS.90048 Sock Filter, Bull 240 Bull 240 SAS.90052 HEPA Filter, Bull 240 Bull 240 VAC.240.01 Anti-static conical filter cartridge Bull 240 EBS VAC.240.02 60 HEPA Toray filter cartridge Bull 240 EBS SAS.45BAND Rubber Band, Bull 45 Never Clog Bag Bull 45 SAS.NCBAG Bag Filter (cloth), Bull 45 Never Clog Bag Bull 45 SAS.45HEPA Filter, Cloth Bull 45 SAS.90049 Wheel, Front Swivel Bull 240C SAS.90050 Wheel, Rear solid wheel Bull 240C SAS.240.MOTOR Motor for Bull 240C Bull 240C SAS2007.00531 Soft Start Bull 240C SAS.45BAG Bag, Paper Filter, Bull 45 Bull 45 VAC.240.03 Ametek carbon brush motor Bull 240 EBS VAC.240.04 Timer Bull 240 EBS VAC.240.05 V3 water proof switch Bull 240 EBS VAC.240.06 Nylon binding tape Bull 240 EBS VAC.240.07 D50 rubber anti-static soft connector Bull 240 EBS VAC.240.08 VFG-S Silicone seals Bull 240 EBS VAC.240.09 CB motor ring Bull 240 EBS VAC.240.10 CB tripod cover Bull 240 EBS VAC.240.11 Through-hole M8 star handle Bull 240 EBS VAC.240.12 Star handle-m5 thread rod Bull 240 EBS VAC.240.13 Vacuum pressure gauge Bull 240 EBS VAC.240.14 4" M12 universal wheel Bull 240 EBS VAC.240.15 8" non-trace caster wheel Bull 240 EBS VAC.240.16 30*30 pipe plug Bull 240 EBS PRODUCT CATALOG Page 104

Miscellaneous Parts Plugs / Cord Ends ITEM SAS.HBL2621 SAS.HBL2623 SAS.CS8365C SAS.CS8364C SAS.CS8165C SAS.CS8164C DESCRIPTION Plug, Male 230 V Single Phase Plug, Female 230 V Single Phase Plug, Male 230 V Three Phase Plug, Female 230 V Three Phase Plug, Male 460 V Three Phase Plug, Female 460 V Three Phase Misc Grinder Parts ITEM DESCRIPTION FITS MACHINES PDG.20104.25 Shamrock plate lock Assembly PDG 8000, PDG 6000 PDG.80028.02 Aluminum top plate PDG 8000 PDG.80027.02 Aluminum bottom plate PDG 8000 PDG.80029.60 Aluminum stationary sheave PDG 8000 PDG.20106.00 Rubber Post 70 Duro (HARD) PDG 8000, PDG 6000 PDG.20106.01 Rubber Post 60 Duro (SOFT) PDG 8000, PDG 6000 NB.13.216 Screw, M8-1.25x16 Flat Head Socket Cap PDG 8000, PDG 6000 Edge Pro 180 Parts ITEM DESCRIPTION DG.1313 Coupler, Flex Lovejoy DG.1398 Bearing, Tapered Roller Timken 30303 DG.1399 Seal, Lip 50x30x8 DG.1420 Pulley, M8 20mm Wide, 38 Tooth DG.1404 Sleeve DG.1446 DISC DG.1492 DISC with Vulcanized Velcro - NEW DG.1444 Motor Controller KBVF-26DGFCI DG.1358 Controller Enclosure 800.522.2606 SASECompany.com Page 105

Miscellaneous Parts FLOOR SCRAPER BELTS ITEM DESCRIPTION FITS MACHINES OEM.LE024 Belt, Set of 3, Lightning SASE Lightning OEM.HUE035 Belt, Set of 3, Hurricane SASE Hurricane OEM.LE044 Belt, Set of 2, Lightning SASE Lightning MISC NEEDLE SCALER PARTS ITEM DESCRIPTION FITS MACHINES SAS.SC.054 Plate, Needle Holder 3mm SC28, SC28AVS SAS.SC.017 Spring, Return 34B, NP34 SC28, SC28AVS SAS.SC.027 Spring, Rear NP 34 SC28, SC28AVS SAS.SC.034 Spring, Return 45B SC49 SAS.SC.052 Seal, Piston NP 34/MH SC28AVS SAS.SC.010 Body, Pistol 34B SC28 SC28 SAS.SC.011 Tube, Round Front 34 SC28, SC28AVS SAS.SC.013 Cover, Screwed SC28 SAS.SC.014 Ring, Internal Retaining M 34 x 1.5 SC28 SAS.SC.015 Screw, Socket Head Cap 5/16-18 x 1.0 SC28, SC28AVS, SC49 SAS.SC.016 Anvil, 34 Series SC28, SC28AVS SAS.SC.021 Body, Complete Valve 23-45 SC28, SC28AVS, SC49 SAS.SC.022 Grip, Rubber Handle SC28, SC28AVS, SC49 SAS.SC.051 Ring, Internal Retaining M37 x 1.5 SC49 SAS.SC.050 Cover, Screwed SC49 SAS.SC.032 Tube, Round Front 45 Series SC49 SAS.SC.033 Anvil, 45 Series SC49 SAS.SC.035 Piston, 45B SC49 SAS.SC.030 Body, Pistol 45B SC49 SC320 PARTS ITEM DESCRIPTION FITS MACHINES 70-24-11-57 Belt CT 320 SC320 70-10-47-01-H Rubber Sealing Rear SC320 70-10-47-01-V Rubber Sealing Front SC320 70-25-02-50 Dust hose 50mm D Black SC320 61-63-10-2RS Bearing Right SC320 61-20-63-07-2 Bearing Drive Side SC320 90-24-16-10-42 Taperlock Motor SC320 PRODUCT CATALOG Page 106

Miscellaneous Parts SCARIFIER SHAFTS, BELTS, BEARINGS, & OTHER PARTS ITEM DESCRIPTION FITS MACHINES SC.08.510 Flail Shaft, 12mm SC8E, FR200 SC.10.510 Flail Shaft, 9/16 for 10 Ultra Drum SC10E, VA25S 633.04.02 Flail Shaft, 12mm VA25S SC.12.500 Flail Shaft, 20mm for 4 Shaft Drum SC12E, VA30S SC.08.500 Drum w/o cutters SC8E, FR200 SC.10.505 Drum w/o cutters SC10E, VA25S SC.12.505 Drum w/o cutters SC12E, VA30S SC.08.119 Belt, Toothed SC8E, FR200, 640 Gas SC.10.117 Belt, Toothed SC10E, VA25S, 880 Gas SC.12.117 Belt, Toothed SC12E, VA30S, 1040 Gas SC.08.604 Bearing, Endplate SC8E, FR200, 6006-2RS SC.10.604 Bearing, Endplate SC10E, VA25S, SC12E, VA30S, 6210-2RS SC.08.404 Bearing, Driveside SC8E, FR200, 6303-2RS SC.10.404 Bearing, Driveside SC10E, VA25S, 6207-2RS SC.12.404 Bearing, Driveside SC12E, VA30S, 6307-2RS SC.08.401 Shaft, Hexagonal SC8E, FR200 NB.70.111 Key, Woodruff for Hexagonal Shaft SC8E, FR200 SC.10.401 Shaft, Hexagonal SC10E, VA25S NB.70.115 Key, Woodruff for Hexagonal Shaft SC10E, VA25S SC.12.401 Shaft, Hexagonal SC12E, VA30S SC.12.407 Key, Woodruff for Hexagonal Shaft SC12E, VA30S SC.08.901 Wheel, Front SC8E, FR200 SC.10.901 Wheel, Front SC10E, VA25S, SC12E, VA30S SC.08.803 Wheel, Rear SC8E, FR200 SC.10.803 Wheel, Rear SC10E, VA25S, SC12E, VA30S SC.08.115 Pulley, Upper for gas models SC8E, FR200 SC.10.156 Pulley, Upper for gas models SC10E, VA25S SC.12.156 Pulley, Upper for gas models SC12E, VA30S SC.08.203 Pulley, Lower SC8E, FR200 SC.10.403 Pulley, Lower SC10E, VA25S SC.12.403 Pulley, Lower SC12E, VA30S SC.10.121 Pulley, Tightening SC10E, VA25S SC.12.121 Pulley, Tightening SC12E, VA30S SC.12.808 Plate, Joint SC12E, VA30S NB.20.112 Nut, Shaft SC8E, FR200 NB.30.218 Washer, Safety SC8E, FR200 SC.08.118 Guard, Belt SC8E, FR200 SC.10.206 Guard, Belt SC10E, VA25S SC.12.118 Guard, Belt SC12E, VA30S 800.522.2606 SASECompany.com Page 107

Need more grinding/scraping/cutting power? Our Equipment Rental Services: SASE offers rental services in Rockford (Knoxville) TN. We rent diamond grinders for coatings removal and concrete polishing; floor scrapers for the removal of tile, VCT, and other hard surface flooring products; scarifiers for trip hazard removal and stock removal of concrete; and dust extraction systems. Contact one of our offices or your local sales representative for rates and availability in your area. PDG 8000 Package: PDG 8000 Grinder, Bull 1250, Hose, Power Cords, 3 QCS Plates and 3 Flex Plates PDG 5000 Package: PDG5000 Grinder, Bull 300, Hose, Power Cords, 3 QCS Plates and 3 Flex Plates Call for weekly and monthly rates 800.522.2606 PRODUCT CATALOG Page 108