UNISONIC TECHNOLOGIES CO., LTD M3368 Preliminary LINEAR INTEGRATED CIRCUIT 3-INPUT IDEO SWITCH WITH 6dB AMPLIFIER DESCRIPTION SOP-8 The UTC M3368 is three input integrated video switch witch selects one video or audio signal from three input signals. It contains 6dB amplifier and its operating supply voltage range is 4.7 to 13 and bandwidth is MHz. Crosstalk is 6dB (at 4.43MHz). FEATURES DIP-8 * Operating oltage: 4.7 ~ 13 * 3 Input-1 Output * Internal 6dB Amplifier * Muting Function available * Internal Clamp Function * Cross-talk 6dB (at 4.43MHz) * Wide Frequency Range MHz (1p-p Input) ORDERING INFORMATION Ordering Number Lead Free Halogen Free Package Packing M3368L-S08-R M3368G-S08-R SOP-8 Tape Reel M3368L-S08-T M3368G-S08-T SOP-8 Tube M3368L-D08-T M3368G-D08-T DIP-8 Tube 1 of 6 Copyright 2011 Unisonic Technologies Co., Ltd
PIN CONFIGURATION BLOCK DIAGRAM GND out + in3(mute) 8 7 6 6dB AMP BIAS C.C.T. 1 2 3 4 in1 SW1 in2 SW2 UNISONIC TECHNOLOGIES CO., LTD 2 of 6
PIN DESCRIPTION PIN NO. PIN NAME INSIDE EQUIALENT CIRCUIT PIN NO. PIN NAME INSIDE EQUIALENT CIRCUIT 1 IN1 IN3 (Mute) SW1 2 SW1 200Ω 2kΩ 13kΩ 6 + 1.1mA 9kΩ 200Ω 3 IN2 7 OUT OUT ma SW2 4 SW2 200Ω 2kΩ 13kΩ 8 GND 1.1mA 9kΩ INPUT CONTROL SIGNAL-OUTPUT SIGNAL SW1 SW2 OUTPUT SIGNAL L L in 1 H L in 2 L/H H in 3 Note: Input clamp voltage is about 2/ of supply voltage UNISONIC TECHNOLOGIES CO., LTD 3 of 6
ABSOLUTE MAXIMUM RATING (T A =2 C) PARAMETER SYMBOL RATINGS UNIT Supply oltage + 1 Power Dissipation DIP-8 00 P D SOP-8 300 mw Operating Temperature T OPR -40~+8 C Storage Temperature T STG -40~+12 C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. ELECTRICAL CHARACTERISTICS ( + =,T A =2 C) PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT Recommended Supply oltage + 4.7 13.0 Operating Current Icc S1=S2=S3=S4=S=2 9. 14.0 21.0 ma oltage Gain Gv in=1.0p-p, 1MHz, o/i, R L =1kΩ. 6.0 6. db Frequency Characteristic Gf in=1.0p-p, o(10mhz)/o(1mhz), R L =1kΩ -1.0 +1.0 db Differential Gain DG in=1.0p-p, staircase, R L =1kΩ 0.3 % Differential Phase DP in=1.0p-p, staircase, R L =1kΩ 0.3 deg. Output Offset oltage off S1=S2=S3=2, S=1 2, o: voltage change ±60 m Crosstalk CT in=1p-p, 4.43MHz, o/i -6 db Switch Change oltage CH All inside SW: ON 2.4 CL All inside SW: OFF 0.8 Note: Unless specified, tested with three mode below. (a) S1=1, S2=S3=S4=S=2 (b) S2=S4=1, S1=S3=S=2 (c) S1=S2=2, S3=S=1, S4=1 or 2 UNISONIC TECHNOLOGIES CO., LTD 4 of 6
APPLICATION Oscillation Prevention on light loading conditions Recommended under circuit. This IC requires 1MΩ resistance between INPUT and GND pin for clamp type input since the minute current causes an unstable pin voltage. OUT 7 r C r ~ =~= 100Ω C 20pF LPF This IC requires 1MΩ resistance between INPUT and GND pin for clamp type input since the minute current causes an unstable pin voltage. This IC requires 0.1μF capacitor between INPUT and GND, 1MΩ resistance between INPUT and GND for clamp type input at mute mode. UNISONIC TECHNOLOGIES CO., LTD of 6
TEST CIRCUIT DC OLTAGE EACH TERMINAL (Typ. on Test Circuit T A =2 C) Terminal Name IN1 SW1 IN2 SW2 IN3 + OUT GND DC oltage 0. 7 UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD 6 of 6