Model AS08010, M1 AR System 10kHz 8GHz The AS08010 and AS08010M1 Systems consist of the AR equipment, listed below. Please refer to individual product specification sheets for details. The export classification for this equipment is 3A001. This equipment is controlled for export in accordance with the U.S. Export Administration Regulations. Diversion contrary to U.S. law is prohibited. The AS08010 control and monitoring equipment is mounted in a ventilated equipment rack along with the 200T4G8 amplifier. The,, and 700S1G4 amplifiers are housed in their own racks to be located on either side of the control rack. Input power to the control rack is filtered and distributed internally. Frequency-matched and dedicated antennas are provided along with the all necessary RF cabling to complete the system. The AS08010M1 System is supplied with shielded racks to house all of the amplifiers, control and monitoring equipment, allowing the equipment to be used within the chamber, reducing cable loss. The shielded equipment racks are mounted on a rolling base creating a portable field generating platform that can be removed from the chamber when not in use. Fiber Optic GPIB control is provided along with the frequency-matched and dedicated antennas and all the necessary RF cabling to complete the system. The SC1000M3 system controller allows manual and remote signal routing of RF signals both to and from the amplifiers, including feedback from the directional coupler sample ports. The AS08010 and AS08010M1 Systems are designed to develop fields for automotive component testing of up to 100V/m @ a 1m test distance from 10kHz-100MHz; 200V/m @ a 1m test distance from 100Mhz to 8GHz; and 600V/m RADAR pulse fields from 1.2-1.4GHz and 2.7-3.1GHz. Equipment list AS08010 AS08010M1 Model, Amplifier, 10kHz-225MHz, 2500 Watts CW 1 1 Model, Amplifier, 80 1000MHz, 1000 Watts CW 1 1 Model, Amplifier, 0.8 4.2GHz, 700 Watts CW 1 1 Model, TWT Amplifier, 4-8GHz, 200 Watts CW 1 1 Model DC2035A, Dual Directional Coupler, 10kHz-250MHz, 3500 Watts CW 1 1 Model DC6280AM1, Dual Directional Coupler, 80 1000MHz, 1500 Watts CW 1 1 Model DC7164, Dual Directional Coupler, 0.8 4.2GHz, 700 Watts CW 1 1 Model DC7352A, Dual Directional Coupler, 4-8GHz, 600 Watts CW 1 1 Model SC1000M3, System Controller, DC 18GHz 1 1 Model PM2003, Power Meter, 3 channel 1 1 Model PH2000A, Power Head, 10kHz-8GHz, -60dBm to +20dBm 1 1 Signal Generator, 100kHz-20GHz (Agilent N5183A-520 with options -1E1, -1EM, -UK6, -UNT, -UNU, and -1CM) 1 - Signal Generator, 9kHz-20GHz (Agilent N5173B-520 with options -1E1, -1EM, -UK6, -UNT, -UNW, and - 1-1CM010A) Model FM7004AM1, Field Monitor 1 1 Model FL7030/Kit M1, Field Probe Kit, 5kHz-30MHz, 0.5-800V/m 1 2 Model, Field Probe Kit, 2MHz-18GHz, 2-1000V/m 2 2 Model PS2000A, Probe Stand 1 3 Model CL2000, Probe Clamp 1 1 Model SI1000, System Interlock 1 2 Model FL2020, Fiber Optic Cable Set, System Interlock, 20m long - 1 Model ATP10K100MM2, E-Field Generator, 10kHz-100MHz, 3000 Watts CW 1 1 Model ATR80M6GM2, Radiant Arrow Antenna, 80MHz-6GHz, 5000 Watts CW 1 1 Model ATH800M5GAM4, High Gain Horn Antenna, 800MHz-5GHz, 1500 Watts CW 1 1 Model ATH4G8, High Gain Horn Antenna, 4 8GHz, 250 Watts CW 1 1 Model TM3001, Tripod Mount, for use with ATH4G8 1 1 Model TP1000BM2, Non-metallic Tripod 3 3 GPIB Extender, Fiber Optic (National Instruments GPIB-140A or equivalent) 2 2 Fiber Optic Cable, GPIB Extender, 10m 1 1 All internal interconnect cables between system components Included Included Model UG-30D/U, Bulkhead Feed-through, Type N female 1 1 Approved for public release by AR RF/Microwave Instrumentation 100215 160 School House Road Souderton, PA 18964-9990 215-723-8181 www.arworld.us Page 1 of 5
Equipment list AS08010 AS08010M1 Model BF7160, Bulkhead Feed-through, 7/16 DIN female 2 2 Model BF3000, Bulkhead Feed-through, 7/8 EIA swivel (male) 1 1 Low Loss Coaxial cable, 7/16 DIN male connectors, 5m 4 2 Low Loss Coaxial cable, 7/8 EIA male connectors, 5m 2 1 Low Loss Coaxial cable, N male connectors, 5m 2 1 Model EMCWare, Radiated Susceptibility, Conducted Immunity, and Emissions Test Software 1 1 Control PC with EMCWare software pre-installed (Rack-Mount, Desktop, or Laptop-specified at time of order) 1 1 Printer, Color 1 1 AS08010 System Layout Anechoic Chamber ATH4G8 Printer GPIB F/O ATH800M5GAM4 FL7030 ATR80M6GM2 FL7218 200T4G8 ATP10K100MM2 700S1G4 Page 2 of 5
AS08010 Equipment Racks SI1000 FM7004 PM2003 Signal Generator SC1000M3 19.25" Front Door 8.75" I/O Panel Power Distribution Rear Control Rack Specifications (Not including associated amplifiers): Size (H x W x D)... 150.52 x 56.03 x 97.5 cm (59.26 x 22.06 x 38.4 in) Weight... 109 kg (240 lb) Power Input... 240VAC, 1-phase, 30 Amps Page 3 of 5
AS08010M1 System Layout ATH4G8 Anechoic Chamber ATH800M5GAM4 FL7030 ATR80M6GM2 FL7218 Printer GPIB F/O ATP10K100MM2 Page 4 of 5
AS08010M1 Equipment Racks SI1000 PM2003 Signal Generator SC1000M3 FM7004 Power Distribution Size (H x W x D) EMI/RFI Shielded, Ventilated, Rack Specifications: Rack 1 Rack 2 Rack 3 Base Assembly (170.4 x 56.0 x 92.5 cm) (170.4 x 56.0 x 92.5 cm) (170.4 x 56.0 x 92.5 cm) 12.0 x 72.0 x 42.0 in (30.5 x 186.9 x 106.7 cm) Total Weight 415 lbs (188.6 kg) 385 lbs (175 kg) 475 lbs (215.9 kg) 150 lbs (68.2) Power Input 120/208 VAC, 50/60Hz, 3phase, 60A 240 VAC, 50/60Hz, 1phase, 60A 240/415 VAC, 50/60Hz, 3phase, 30A Page 5 of 5