ccutech I10 & V10 Wireless multi-input field unit
1 Ideal for adding wireless capabilities to existing or new wired measurement sensors such as radar tank gauges, flow meters and chemical analyzers, the ccutech I10 and V10 wireless multi-input field units provide dual analog inputs in either current (4-20m) or voltage (0-10V) configurations. ach unit also includes two discrete contact closure inputs for simple apparatus use. ll ccutech field units automatically report field data to a centralised ccutech base radio over distances of up to 3000ft (~1000m). ach field unit is self contained, featuring an integrated 900MHz or 869MHz (license-free band), frequency hopping, spread-spectrum transceiver and antenna, and long-lasting battery that offers 3+ years of maintenance-free service (up to 10 years depending on data rates and battery options). ccutech networks are highly scalable with the possibility of 100 field units per base radio and 256 base radios per installation. ccutech field units are housed within a compact and weather-proof (M 4 or M4X) enclosure with options for a remote sensor and remote antenna on select models. Field units are available in a wide range of certifications and are protected by an industryleading 3-Year warranty (parts and labor).
Product ata Sheet ccutech I10 & V10 Specifications 2 Functional Sensor Type Location Frequency Range Power etwork Capacity Features Inputs Input Characteristics ccuracy Sampling and Transmission Characteristics RF Characteristics Self-iagnostics General Operating mbient nvironment Power Materials of Construction Operating Shock and Vibration Random Vibration Characteristics lectromagnetic Compatibility Safety Certifications ccutech I10 & V10 Multi-Input Field Unit 900MHz and 869MHz (urope) license-free bands Integrated battery Max. 100 field units per base radio Max. 256 base radios per network 2: 4-20m inputs sharing a common ground and two discrete contact closure inputs (I10) 2: 0-10V inputs sharing a common ground and two discrete contact closure inputs (V10) 10Ω impedance, analog (I) 100kΩ impedance, analog (V) ± 0.1% of Full-scale reading at reference conditions mbient Temperature ffect = ± 0.01% of reading per C The Multi-Input Field Unit samples analog signals (4-20m or 0-10V) at regular intervals. The data may then be transmitted to the Base Radio for centralised monitoring and data acquisition. The user specifies how frequently the process is monitored and how often data is transmitted. Input 1 and Input 2 user-configured low rate and high rate conditions Sampling rate user-selectable from 1 to 60 seconds (low rate) and from 1 to 30 seconds (high rate) Transmission rate user-selectable from 1 second to 60 seconds (low and high rate) ccutech Manager can be used for real-time monitoring of the process information. The user can set thresholds to represent alarm or abnormal conditions. 902MHz - 928MHz band (FCC/IC) 915MHz - 928MHz band (ustralia) 915MHz - 921MHz band (ew Zealand) 869MHz (urope) Up to 3000ft (~1000m) typical range with obstructions The RF module in each radio is individually tested and calibrated over the full temperature range to ensure reliable wireless operation Transmit Power: +13dBm Receive Sensitivity: -113dBm djacent Channel Rejection: 48dBc lternate Channel Rejection: 62dBc Low battery alarm indicates the need to replace the battery (approximately one month warning) Contains extensive self-checking software and hardware that continuously monitors operation. ny sensor or device parameter that is out of spec is identified and reported -40 to +85 C (-40 to +185 F) electronics -20 to +70 C (-4 to +158 F) display (full visibility) -40 to +85 C (-40 to +185 F) display (with reduced visibility) Humidity: 0 to 95%, non-condensing Self-contained power One C Cell Standard ccutech field units include a single C-Cell lithium battery that offers 3+ years of maintenance-free service (up to 10 years depending on data rates and battery options). Base Plate: 304 Stainless Steel Junction box: luminum Cover: G Lexan, V-0 rating and UV stable Certified per IC 60068-2-6 (vibration) and 2-27 (shock) Certified to withstand 6 g s, 15 minutes per xis from 9 500Hz Operates within specification in fields from 80 to 1,000MHz with field strengths to 30V/m Meets 50082-1 general immunity standard and 55011 compatibility emissions standard orth merica HZLOC: ccsus Intrinsically Safe: xia IIC; x ia IIC Class I, iv. 1, Groups, B, C &, T4 Class II, iv. 1, Groups, F and G, T3 Class III, T3 Class 1, Zone 0, x ia IIC, T3 Class I, iv. 2, Groups, B, C &, T4 Class II, iv. 2, Groups F and G, T4 Class III, T4 xplosion Proof: Class I, iv. 1, Groups, B, C & ; T4 Class I, iv. 2, Groups, B, C & ; T4 TX/ICx HZLOC: LCI Intrinsically Safe x ia IIC T3 Flame Proof: x d IIC T4. MC & Radio: orth merica : FCC, IC urope : C Mark (R&TT) ustralia / ew Zealand : C - Tick isclaimer: Schneider lectric reserves the right to change product specifications. For more information visit www.schneider-electric.com.
Product ata Sheet ccutech I10 Model 3 TBUITJP00 represents a typical part number. Model Type TBUI (2) 4-20 milliamp & (2) contact closure inputs Select: RF Module Type T 902MHz - 928MHz band (FCC / IC) 915MHz - 928MHz band (ustralia) 915MHz - 921MHz band (ew Zealand) 869MHz (urope) Select: Safety Certifications CS: xplosion-proof protection: iv. 1: see specifications page CS: on-incendive protection: iv. 2: see specifications page J CS: Intrinsically safe protection: iv. 1 & 2: see specifications page Q TX/ICx: Intrinsically safe protection: see specifications page TX/ICx: Flame proof: see specifications page Select: Housing & Battery Pack P M 4 Polycarconate Housing with 1 Cell (available with Intrinsically Safe Rating) 1 M 4X luminum Housing with 1 Cell 2 M 4X luminum Housing with 2 Cells (not available for TX/ICex) 4 M 4X luminum Housing with 4 Cells (not available for TX/ICex) Select: igital Output one Select: Integral ntenna or Cable & Connector Interface 00 Integral ntenna with ntenna Cover 01 xternal Yagi antenna, 6dB, attached to base of unit 10 10ft. (3.05m) cable with -Male connector for remote antenna configurations 25 25ft. (7.62m) cable with -Male connector for remote antenna configurations Select: Junction Box o Junction Box (exposed lead wires) B M 4 - luminum Rear ntry M 4X - Stainless Steel Rear ntry
Product ata Sheet ccutech V10 Model 3 TBUVTJP00 represents a typical part number. Model Type TBUV (2) 0-10 volt & (2) contact closure inputs Select: RF Module Type T 902MHz - 928MHz band (FCC / IC) 915MHz - 928MHz band (ustralia) 915MHz - 921MHz band (ew Zealand) 869MHz (urope) Select: Safety Certifications CS: xplosion-proof protection: iv. 1: see specifications page CS: on-incendive protection: iv. 2: see specifications page J CS: Intrinsically safe protection: iv. 1 & 2: see specifications page Q TX/ICx: Intrinsically safe protection: see specifications page TX/ICx: Flame proof: see specifications page Select: Battery Pack P M 4 Polycarconate Housing with 1 Cell (available with Intrinsically Safe Rating) 1 M 4X luminum Housing with 1 Cell 2 M 4X luminum Housing with 2 Cells (not available for TX/ICex) 4 M 4X luminum Housing with 4 Cells (not available for TX/ICex) Select: igital Output one Select: Integral ntenna or Cable & Connector Interface 00 Integral ntenna with ntenna Cover 01 xternal Yagi ntenna, 6db, attached to base of unit 10 10ft. (3.05m cable with -Male connector for remote antenna configurations 25 25ft. (7.62m) cable with -Male connector for remote antenna configurations Select: Junction Box o Junction Box (exposed lead wires) B M 4 - luminum Rear ntry M 4X - Stainless Steel Rear ntry
Product ata Sheet ccutech I10 & V10 imensions 4 Remote ntenna Option Integral ntenna (standard) 12.73 (323.5mm) 4.68 (119.0mm) 11.7 (297.3mm) 4.68 (119.0mm) XT ccutech TR XT ccutech TR XT ccutech TR 12.01 (305.3mm) Remote ntenna 23.03 (584.8mm) Telemetry & Remote SC Solutions www.schneider-electric.com ocument umber TBULM08002-13 2011 Schneider lectric. ll rights reserved - ugust 2011