Rectangular Industrial Connectors: Technical Data Overview Lapp offers 11 series of rectangular connectors. The rectangular overview section will help determine the series which best suits your application. An explanation of rectangular connectors is in the Technical Data section. Once the appropriate series has been determined turn to the referenced section in the catalog. The EPIC Rectangular Series is set up in the following structure. The inserts (plugs and receptacles) are shown by number of contacts. All available terminations are shown. Please remember when choosing crimp terminated plugs & receptacles, the contacts have to be ordered separately. The appropriate contacts and tools immediately follow the plugs and receptacles. Immediately following each group of plugs and receptacles are the housings (hoods and bases) which fit these connectors. The hoods and bases are grouped by number and position of levers to ensure compatibility. Metric parts and all diagrams are shown in the main HA & HBE Housing Sections. Specifications: Temperature Range: Protection class: Material: EPIC RECTANGULAR HOUSINGS DIN 6-0 C to + C NEMA, ; IP6 NEMA : HBE 6 -, HA - 6: aluminum alloy, powder coated (grey), locking levers and bolts made of zinc plated steel. HA /: Die cast zinc, powder coated or thermoplastic flame retardant material rated UL V-0 (Grey or Black Plastic). NEMA : HBE 6 - EP, HA - 6 EP: Environmentally Protected: aluminum alloy, powder coated (black), locking levers and bolts made of stainless steel. EPIC HBE SERIES STANDARD GREY (NEMA, IP 6) EP BLACK COATING (NEMA ) PG NPT METRIC PG NPT METRIC EPIC HA SERIES PG DIE CAST ZINC (NEMA, IP6) NPT PLASTIC (NEMA, IP 6) METRIC DIE CAST ZINC (NEMA, IP6) STANDARD GREY (NEMA, IP 6) EP BLACK COATING (NEMA ) PG NPT METRIC PG NPT METRIC ** Please note that all the rectangular plugs and receptacles either fit into a HBE or HA Series housing. 00-- www.lappusa.com
Rectangular Industrial Connectors: Technical Data Overview EPIC HA EPIC RECTANGULAR PLUGS & RECEPTACLES 1 EPIC HBE 6 EPIC Termination,,,,,, 6 (+PE) A (HA /), 1A (HA - ) AWG 0-1 (0. -. mm ) 6,,,,, (+PE),, Cage clamp AWG 0-1 (0. -. mm ) AWG 0 - (0. - mm )-,, 1,, 0, 0, 6, 0, (+PE) A AWG - 1 (0.1 -. mm ) EPIC STA EPIC HBVE EPIC MC EPIC D 60 1 6, 1, 0, 0 (+PE) V A, Solder AWG 0 - (0. - 1. mm ), 6, (+PE) AWG 0-1 (0. -. mm ) - 0 (+PE) 6-00V - A /Coax/ Fiber Optic/ AWG - 6 (0.06 - mm ),,,, 1, (+PE).A AWG - 1 (0.1 -. mm ) EPIC HBS MIED POWER EPIC HEE EPIC HQ 0 1 6 6, (+PE) A AWG 0 - (0. - 6.0 mm ) Pwr, Pwr & Sgl, Pwr & Sgl - 0A up to AWG 6 (Pwr) up to AWG 1 (Sgl),,, 6, 6, (+PE) AWG 0 - (0. -.0 mm ) (+PE) AWG 0-1 (0. -. mm ) 0 00-- www.lappusa.com
Rectangular Industrial Connectors: Quick Select Chart # of Contacts + PE 6 1 1 0 0 6 0 6 0 1-0 Pwr/ 0 Pwr/ Pwr/ HA HQ STA HBE HEE HBS HBVE D MC MP UL Rated Voltage V 6-00V 0- UL Rated Current A.A A 1 A A - A - 0A (/) (TB) Termination Type Cage Clamp Solder Terminal Block Wire Size (AWG) 0 - (TB) - 1 () 0-1 up to 1 () 0 - () 0-0 - 6 up to 6 () 6 60 1 1 6 1 0 00-- www.lappusa.com 1
Rectangular Industrial Connectors: Quick Select Chart TERMINATE YOUR OLFLE CABLE WITH THE RIGHT CONNECTOR Wire Gauge AWG # Conductors w/ Ground HA STA A HBE HEE 6 1 HA MC MC MC/MC MC/MC MC x MC/MC MC/MC MC x MC x MC MC MC/MC/MC MC/MC MC x MC MC MC/MC/MC MC/MC HA HBE HBE HEE HBVE 1 x HBE HBE HEE HEE x x HA MC MC MC/MC/MC MC/MC HA STA1 STA1 HBE HBE HEE HBVE 1 x 1 0 60 HA HA HA6 HA6 HA6 STA0 STA0 STA0 STA0 HBE HBE HBE HBE HEE HEE HEE6 HEE6 HEE6 HEE6 HEE6 0 0 0 6 6 D D D x x x x x x 6 x 6 HA MC MC MC/MC MC/MC HA STA1 STA1 HBE HBE HEE HBVE 1 x 1 0 HA HA HA6 HA6 STA0 STA0 STA0 STA0 HBE HBE HBE HBE HEE HEE HEE6 HEE6 HEE6 HEE6 0 0 0 6 D D x x x x x x 6 0 HA MC MC MC/MC MC/MC HA STA1 STA1 STA1 HBE HBE HBE HEE HBVE HBVE 1 1 HA STA0 STA0 STA0 STA0 HBE HBE HBE HBE HEE HEE HEE HEE6 0 x x x Please note that the amperage for all series listed in black can be found at the top of the column. Amps, Amps, 1 Amps, mps, 0 Amps, Amps, 0 Amps, 0 Amps, Amps Notes: 1) The above chart shows the relationship between cable wire gauge and conductor count with connector contact count. Final connector selection and application suitability will depend on voltage and current limits of the cable and connector ) The MC Series modular connector offers a wide variety of mix-and-match combinations. The combinations shown in the chart are offered as suggestions based on providing a solution in the smallest housing size. HBS A HBVE A D. A HQ 00-- www.lappusa.com MC MP
Rectangular Industrial Connectors: Quick Select Chart TERMINATE YOUR OLFLE CABLE WITH THE RIGHT CONNECTOR Wire Gauge AWG # Conductors w/ Ground HA STA A HBE HEE HBS A HBVE A D. A HQ MC MP w/ or w/o gnd, 6 w/ or w/o gnd w/ or w/o gnd 1 1 0 1 0 6 0 0 1 1 0 1 0 6 0 0 1 1 0 1 0 6 0 0 1 1 1 1 1 0 0 0 0 0 0 0 6 D D D x x x x x x x x x x x x x x x x x x x x x x x x x x x Please note that the amperage for all series listed in black can be found at the top of the column. Amps, Amps, 1 Amps, mps, 0 Amps, Amps, 0 Amps, 0 Amps, Amps Notes: 1) The above chart shows the relationship between cable wire gauge and conductor count with connector contact count. Final connector selection and application suitability will depend on voltage and current limits of the cable and connector ) The MC Series modular connector offers a wide variety of mix-and-match combinations. The combinations shown in the chart are offered as suggestions based on providing a solution in the smallest housing size. 00-- www.lappusa.com
Rectangular Industrial Connectors: Technical Data Overview PLUGS & RECEPTACLES WITH THEIR MATING HA HOUSINGS HOUSINGS HA / PLUGS & RECEPTACLES HA HA / HQ HQ STA STA 6 / HA HA STA 1 1 HA HA STA 0 HA HA STA 0 0 HA HA HA 6 HA 6 PLUGS & RECEPTACLES WITH THEIR MATING HBE HOUSINGS PLUGS & RECEPTACLES HOUSINGS HBE 6 HBE HBE HBE HBE HBE HBE HBE 6 HBE HBE HBE HBE HBE HEE HEE HEE HEE HEE 6 HEE 6 HEE HBS HBS 6 HBS HBVE HBVE HBVE 6 HBVE 0 6 0 D D D D D D 1 D MC 1 Mixed Pwr Pwr/ 0 Sgl Pwr/ Sgl Pwr/ Sgl APPROVALS EPIC rectangular connectors shall comply with all applicable requirements of Underwriters Laboratory (UL) Standards 1 and, VDE Standard 01 for creepage and clearance distances and VDE Standard 06 for the connector design. The and D series is developed according to DIN Standard 6. The recognized UL file number and Canadian Standards Associations (CSA) for EPIC CONTACT connectors are: UL recognized file #E0 CSA certified file #LR00-1 EPIC connectors meet IP 6, NEMA, and NEMA standards only when in the mated condition. 00-- www.lappusa.com