FRONT BACK Features: Transmit 10/100 BaseT Full Duplex Ethernet up to 8,000ft over RG-59/U, 2,000ft over 2-wire/UTP or 1,300ft over Shielded Twisted Pair* The TBus architecture allows multipoint operation in any star or daisy-chained topology, with any combination of wire types, and up to 64 remote transmitters/ip cameras Transparently supports all networking protocols (UDP, TCP/IP, HTTP, Multicast etc.) using advanced 128-bit AES encryption Dual 10/100/1000 uplink ethernet connectivity Easy configuration, no PC required 56 VDC is distributed over the TBus to all connected equipment. PoE, PoE+, or High Power PoE cameras (or other PoE devices), up to 50 watts* are supported. The NVT Model NV-ER1808i TBus Ethernet over Coax/UTP Receiver Hub is a 1U 19 rack mountable bus-architected media switch that has 8 TBus ports, capable of supporting up to 64 TBus transmitters and their subsequent 10/100 BaseT Ethernet and PoE+ powered devices*. The TBus transmission medium can be coax, 2-wire/UTP, or Shielded Twisted-Pair. Data rates up to 200 Mbps are achievable, making this device the ideal choice in new or legacy installations where existing cable is re-deployed as part of an upgrade to IP cameras. An internal 125 watt 56 VDC power supply can be optionally augmented by an external 250 watt auxiliary power supply, supporting redundancy and/or higher power applications. The NV-ER1808i is backed by NVT s award winning customer support, limited lifetime warranty, and advance replacement. No IP or MAC addressing configuration is required, yet is available for browser-based monitoring and control. This provides exceptional yet simple configuration and diagnostics for the installer or remote monitoring facility. Status LEDs indicate power, auxiliary power, and link connectivity/activity. *Distance and number of devices supported may lower due to limited power supply capacity and wire voltage-drop, or data-rate limiting due to the selected wire s high-frequency signal attenuation. See manual or IP Distance Calculator at nvt.com. Page 1 of 5
Technical Specifications T B U S B U I L D I N G W I R I N G I N T E R FA C E Number of Ports: Eight TBus Interfaces Data Rate: Impedance: Supports multiple * remote TBus Transmitters including the NV-ET1801 and the NV-ET1804 Up to 200Mbps combined network speed 25 to 100 Ω Distance: See pages 4 and 5 Transmission technology: OFDM, 128-bit AES encryption U P L I N K I N T E R FA C E S Connectivity: RJ45 10/100/1000 BaseT, Auto-crossover SFP Slot for optional second gigabit port * I M P O R TA N T N O T E : Data rate, distance and number of devices supported may lower ue to power supply capacity, wire voltage-drop or signal attenuation. See Wire Distance Charts on pages 4 and 5. For fault/safety, never use more than two power supplies within one TBus network. L E D S TAT U S I N D I C AT O R S E N V I R O N M E N TA L Operating temperature: Storage temperature: Transient Immunity: -22 F to 122 F (-30 C to +50 C) 20 to 85% RH non-condensing -40 F to 185 F (-40 C to +85 C) 0 to 95% RH non-condensing 5x20µS 3000A, 6000V ESD 20KV, 200pF P O W E R S U P P LY Power is provided from an internal 125 Watt power supply, which can be optionally augmented by an external 250 watt auxilliary power supply. This architecture supports redundancy and/or higher power applications. IEC 380 power inlet: 115/230VAC 50/60 Hz 1 amp 125 watts 425 BTU / hour Protection: Total system consumption: 5x20mm type T fuse 2 amps 250V + total consumption of PDs (IP cameras) = total consumption of remote transceivers + total power dissipated in the wire + consumption of the NV-ER-1808i=13W. Power: BNC/ 2-Wire Interface: RJ45 Interface: M E C H A N I C A L Dimensions exclude brackets and connectors Blue Power On Flashes when joining Green Link Green/Amber Quality Green Link Blinks with Data A C C E S S O R I E S (included) Mounting: Rackmount L brackets for front, rear, or wall installations Power cord: R E G U L AT O R Y Molded IEC power inlet cord 7 ft (200 cm) Dimensions: 17 in wide x 1.7 in high x 10.5 in deep 43 cm wide x 4.5 cm high x 26.7 cm deep RoHS UL Listed to IEC/UL 60950-1 Complies with FCC part 15B limits Weight: 7.78 lbs (3,52 Kg) Specifications subject to change without notice. Page 2 of 5
Browser-Based Monitor and Control Tools The NV-ER1808i contains an http server allowing secure communication with a web browser. This allows for: Control & monitoring functions Joining function Password write access (in conjunction with the Joining pushbutton) Reading of per-channel and overall current draw Power-cycle reset of any channel Download of firmware upgrades Remote diagnostics Accessories NV-BNCT: BNC T adaptor NV-EC4BNC: 1:4 BNC splitter adaptor NV-RJ45A: Male RJ45 to-screw-terminals NV-PC4PR: RJ45 Patch Cord, 4-pair 3 (1m) NV-PS56-250W: Auxiliary Power Supply FRONT BACK Page 3 of 5
Wire Type and Power Distance Capacity The distance capability of wire is dependant on its ability to deliver DC power, and separately, to deliver high-frequency data signals. The graph below shows maximum power delivery when using a 56V power supply. If you are locally powering your camera (or other remote device), then this graph does not apply. The graph on the next page shows the maximum data delivery rate. A Distance Calculator can be found at www.nvt.com. PoE devices require a minimum of 43V to operate. With a 56V supply, we have 13V of allowable voltage drop on the wire. The voltage will dip in proportion to the remote (camera) load. The graph below shows what PoE power distances are supported for various loads and wire types. Start with the camera wattage at the left. Sometimes IP cameras are listed as to their PoE Class rather than wattage. If this is the case, use the colored classes instead. Now read over to the right until you find your kind of wire. Then look up (feet) or down (meters) to find your maximum wire distance. If your wire is not among the examples, simply measure its total resistance and find that value on the right side of the graph. The maximum supported wattage is on the left. 50 W 40 W 30 W 25 W 20 W 18 W 15 W 12 W 10 W 8.0 W 6.0 W 5.0 W 4.0 W 3.0 W 2.5 W 2.0 W 98 ft 197 ft 164 ft 131 ft PoE Cla s 262 ft 984 ft 820 ft 656 ft 590 ft 492 ft 397 ft 328 ft RG59/U 22 AWG RG59/U 23 AWG CATV 20 AWG 5 2-Wire 24 AWG 2 A G 4-pair Cat5 or 2-Wire 18 AWG 2-Wire 2-Wire 2 AWG 20 AWG W C T C W CATV 22 AWG V 2 AWG A 1,312 ft 1,968 ft 1,640 ft 2,624 ft RG59/U 20 AWG RG6 6,560 ft 5,904 ft 4,920 ft 3,936 ft 3,280 ft 18 AWG RG11 G1 9,840 ft 8,200 ft 14 AWG AW 13,120 ft 19,680 ft 16,400 ft 26,240 ft 32,800 ft 3 Ω 4 Ω 6 Ω 7 Ω 9 Ω 11 Ω 12 Ω 14 Ω 16 Ω 19 Ω 21 Ω 23 Ω 24 Ω 28 Ω 0 W 38 Ω 10,000 m 8,000 m 6,000 m 5,000 m 4,000 m 3,000 m 2,500 m 2,000 m 1,800 m 1,500 m 1,200 m 1,000 m 800 m 600 m 500 m 400 m 300 m 250 m 200 m 180 m 150 m 120 m 100 m 80 m 60 m 50 m 40 m 30 m (+1) 650.462.8100 800.959.9870 FAX (+1) 650.326.1940 nvt.com info@nvt.com Page 4 of 5
Wire Type and Data Distance Capacity In addition to the power distance limitation, maximum data throughput is limited by wire quality. The graph below will help you determine your data throughput. A Distance Calculator can be found at www.nvt.com. 20,000 ft 10,000 ft 7,000 ft 5,000 ft 3,000 ft 2,000 ft 1,000 ft 700 ft 500 ft 300 ft 200 ft 100 ft 70 ft 50 ft RG-11 Coax RG-6 Coax RG-59 Coax UTP Cat 5 Shielded 18/2 Un-Shielded 18/2 7,000 m 5,000 m 3,000 m 2,000 m 1,000 m 700 m 500 m 300 m 200 m 100 m 70 m 50 m 30 m 20 m 30 ft 200 180 160 140 120 100 80 60 Maximum Network Data Rate (Mbps) 40 20 10 m (+1) 650.462.8100 800.959.9870 FAX (+1) 650.326.1940 nvt.com info@nvt.com Page 5 of 5 Copyright 2013 NVT, Inc. 411-1808-1-A