ENZIS - EXTREMELY SUPPLE AND LIGHT IN APPEARANCE

Similar documents
Purelite LED. Maximum freedom of design. Because it s super flat.

Purelite D LED. Maximum freedom of design. Because it s super flat.

FABA. Installation Instructions. Conductor Bar System. Publication #FABA-03 3/1/04 Part Number: Copyright 2004 Electromotive Systems

INSTALLATION INSTRUCTION Solorail - Low Voltage Starter Kit

Line volt rail & fixtures. Low volt quick connect fixtures with transformers

Factory Assistance: Phone: Fax: Page 1

Introduction. Welcome to the Radiant Architectural Lighting products catalogue.

CANOLUX 65 INTERIOR LIGHTING MODEL NUMBER Y117 - CANOLUX 65 SPECIFICATIONS

INSTALLATION RECOMMENDATIONS For The Con-Tech ODYSSEY Line Voltage Flexible Track System

Busbar and Modular Wiring Systems

architectural lighting Pendant BOXs Pendant Kardan BRITE TRENAR

Wall flashing profiles FP 60 WA 1 WA 150 WA 1 - ÜK WA 1 - Ü 150 E

Opus Cabinets with "H Storage Unit, continued

Joiner Kit Joiner bracket (x1) Biscuit aligners (x2) Trim Flange

B.VEO TRACK TRACK MOUNTED LUMINAIRES

FORMATIONS Curves Clouds with AXIOM VECTOR Trim and Suspension System

INSTALLATION: D1-NOTCH DRYWALL TRIM FLANGE

B.VEO ON RECESSED LUMINAIRES

RAIL / GRANDE RM2 & RM4 Series. by Metalumen

4 Antennas as an essential part of any radio station

TABLE OF CONTENTS. 17mm ALUMINUM WALL MOUNTED FRAME. 22mm TAMPER RESISTENT FRAME. 36mm ULTRA THIN BACKLIT ALUMINUM FRAME

LED Omni Wand System A Simple Fixture That Is Multi-Functional

E L E G A N C E A N D S O P H I S T I C AT I O N

SHOP LIGHTING INDOOR OUTDOOR SAFETY

QT LUMINAIRE. Pendiro.

LdG-2 Lighting design Guide for Vertical Surfaces

Installation Guide 888-4WB TRAY

6625 WEST WILSHIRE BLVD. OKLAHOMA CITY, OK (405) FAX (405)

Create cable assemblies to fit your style

Alphabet By Ledra Brands Inc. SHOPline Trunk. example: SHOP TR WH. Base. Length. Base. Length SHOP. Shop. Optics ASL ASR DAS

Office Partitions WARNING. Assembly Instructions. Customer Service A S S E M B LY HARDWARE H1 H2 H3 H4 H5 H8 H9 H10 H11 H12

Clopay Models 835/837 Sliding Door System Installation Guide

ASSEMBLY INSTRUCTIONS FOR SL500A AND SL500AL

, V E R S AT I N T R I G U I N G S H A P E I L E O P T I C S

Section 11 CABLE & ROD SYSTEMS, SIGN FIXING & SIGN STANDOFFS. Web. acrylicdesign.ie .

Installation Easy Quick Cost-effective. 2 3L-Click

10" E-Series D-Series - Pair. kit includes (14) (4) (4) It is strongly recommended that this product be installed by a professional.

METALWORKS TARTAN PANELS General Installation Instructions

M36 for millimetre-precise profile lengths and structures

Table and Furniture Base Fittings Plinth Adjusting Fittings

Skybolt V2 Construction Manual

Art and Picture Hanging Rail Systems SYSTEMS. Display with Elegance

CRYSTEEL S. this manual must be included with the vehicle after completing the installation.

PO Box 1879, 515 Tucker Ave. Friday Harbor, WA Phone: (360) Fax: (360)

Sky FactoryTM toll free

Scan Studio Lighting ApS Damgaardvej 2 Dk-5500 Middelfart. Tel.: Fax:

LED Thin Frame Fixed Frame Screen User Guide

Clearview Railing System Installation Instructions

Assembly Instructions

Mounting Accessories. Installation Guide. VIVOTEK SD83XXE Speed Dome

FIXTURE INSTALLATION GUIDE Model T21T (Low Voltage Pendant Set 120V)

Installation Instructions for Vista Air Vertically Folding Walls

Pinnacle Technical. Bench and Shelf Trunking. cable management perimeter and distribution. Features.

Design Guide: CNC Machining VERSION 3.4

BALDUR // SPECIFICATION SHEET. Specifications. LUMEN EFFICIENCY (lm/w) LED MODULE. LIFETIME 50,000 hours at flux decrease of 30% COLOR TEMPERATURE

Top Mount Ultra Modern Hanger

Interior Equipment/Shop Fittings

Prospector. Compact, unobtrusive HIT and LED display lighting

Decorative luminaires for open ceiling commercial and retail applications. Indy Commercial/Retail Lighting

Assembly Instructions Nevins Phone Booth

SILVERBACK INSTALLATION MANUAL

Heat pipe technology to cool LEDs. Powerful light, precisely where you need it.

aluline 1 These aluboard8 rails are black anodised, as per customer s request.

VEUE PIVOT ARM INSTALLATION MANUAL. February 2017

STAS multirail accessories

The First Layer of Light. Indirectly. APPLICATION GUIDE

LEGENDS RETRACTABLE DOOR SCREENS

Project Details: Glide Side Baffle, (2) 32W T8, 41 average footcandles,.88w/sq. ft.

Rockfon System OlympiaPlus A Impact 1A

Arched Top Lantern Pendant Assembly and Installation Instructions. Country of Destination: US/CN UK/EU/AUS Middle East

XL-GC03 Sliding Door Lock Installation Manual PAT XL-GC06 Sliding Door Hanger Installation Manual XL-GC08 Sliding Door Lock Guide Installation Manual

#4 Phillips Driver Bit 1/8, 4mm, 5.5mm & 8mm (5/16 ) Allen Wrench. Safety Glasses

The Soft Celiling Luminaire.

METALWORKS Linear (Interior & Exterior Applications)

aluminium profile system

Continuous line Node and continuous-line coupling expand the design scope of the Luceo H and offer additional advantages for creativity.

WIRE MESH CABLE TRAY

RSS Rectilinear Suspended Series

FLATSUN - Rafael Lozano-Hemmer. Installation Manual

EFFEGI BREVETTI MINIWINCH. Effegi Brevetti MINIWINCH. > Mechanism for downward folding flap doors

INFUSIONS and METALWORKS Wings Accent and Acoustical Clouds

Laser Blade. frame version minimal version page 50. frame version minimal version page 53. Laser Blade L High Contrast UGR<19.

System 3000 specifications

VEER takes a detour from the ordinary, infusing texture and form into a sleek new direct/ indirect luminaire.

Inspiration Suspended

Box Track INSTALLATION INSTRUCTIONS

For energy savings select ceiling-mounted luminaires that use fluorescent lamps.

southpaw enterprises, inc.

SpeedPRO Raceway System

6X3 Oscar Shed Assembly Manual

Architectural Supports

9 X 9 REMOVABLE TYPE ALUMINUM WINDOW BARS INSTALLATION INSTRUCTIONS Import Note : 9 X 9 Spacing Removable Type Installation is covered in this

ROCKFON System Olympia Plus

3. Barrier elements. Barrier posts. Stainles steel

A R E A & S I T E WA L L M O U N T E D F LO O D B O L L A R D S

Installation Introduction

SURFACE CLIP MOUNT. 1 Insert lens into channel, measure, and cut to length. Remove lens cover from channel. surface. Attach lens cover and end caps

INSTALLATION MANUAL PBL-UMP

PACKING LIST MACO V-5000

Horizontal Array Bracket Installation Instructions

Transcription:

EZIS - EXTREMELY SUPPLE AD LIGHT I APPEARACE Extremely supple The new EZIS LV track can be shaped on site to extremely tight bends of as little as 52 mm radius. This ability allows EZIS to hug the geometry of ceilings, walls and furnishings in order to make corner connectors dispensable. Easy on more than your wallet EZIS requires fewer hangers, fewer attachment points, no unnecessary ceiling supports and no corner connectors, reducing not only your planning costs but also your installation costs by up to 50%. So EZIS is easy on your nerves as well as your wallet. Light in appearance The high inherent rigidity of the EZIS track reduces the required number of hangers to a minimum. The new Delta hanger also allows accurate track guidance with fewer ceiling suspension points. As a result, the EZIS track is always light in appearance to keep the focus firmly on your architecture. Track Connectors Mounting elements Power feed s 96 www.bruck.de Box 70396 10724 STOCKHOLM SWEDE

EZIS system luminaires or uni-lights? MALO CLASSIC The MALO and CLASSIC system luminaires with the built-in system adapter have been specially developed for EZIS and can be mounted directly onto the EZIS track. That saves both time and money. Or is it versatility you want? If you do, the EZIS plug-in adapter will open the door to the world of uni-lights. Simply fit the adapter onto the EZIS track and screw your desired uni-light into the adapter. You will find our uni-lights in the section of the same name. EZIS system luminaires MALO - precision lighting MALO reflectors have been computer-designed to offer outstanding light quality for illuminating tables, desks, pictures, walls and so much more... MALO reflectors direct the light just where it is most needed. The surface of the reflector around the light source has a special texture that distributes the light softly and evenly and with no irritating shadows. UP & WALL FREE SPOT DOW EZIS system luminaires CLASSIC - classic lighting The CLASSIC family of luminaires offers light for many different duties, whether as wall washers or spots for illuminating pictures, pendant luminaires for lighting tables and desks or simply as a point of light for good mood lighting. www.bruck.de 97 Box 70396 10724 STOCKHOLM SWEDE

EZIS MALO / UP matt 95mm 120mm 140746mcgy Minimum clearance from ceiling 0.5 m MALO / WALL 1 128mm 140748mcgy MALO / WALL 2 matt 120mm 115mm 140749mcgy Swivel range 2 x 180 Minimum clearance from ceiling 0.5 m MALO / UP & WALL matt 38mm 140750mcgy 120 mm Swivel range 2 x 180, height adjustable Minimum clearance from wall/ceiling 0.5 m 98 www.bruck.de Box 70396 10724 STOCKHOLM SWEDE

EZIS MALO / SPOT 42mm 123mm 140752mcgy Half-value angle 30 Swivel range 2 x 180 MALO / DOW 1 42mm 103mm 140751mcgy Half-value angle 40 MALO / DOW 2 62mm 92mm ca. 1500mm 220223mcgy 140360mcgy / without adapter Half-value angle 40 Please order system adapters separately MALO / DOW 3 80mm 125mm ca. 1500mm 220224mcgy 140360mcgy / without adapter Half-value angle 40 Please order system adapters separately www.bruck.de 99 Box 70396 10724 STOCKHOLM SWEDE

EZIS CLASSIC / FREE QT 9 G 4 20W CLASSIC / UP & WALL CLASSIC / SPOT1 Design: Martin Kania 150mm 91mm 114mm 72 / 132mm 140700mcgy 140701mcgy 140720mcgy Length 72 mm 132 mm Deco elements can be found on page 42 140740mcgy Reflector shells swivel through 350 QR-CBC 51 GU5,3 Swivel range 2 x 180 For light-optical fittings, see page 55 2X35W CLASSIC / SPOT 2 Design: Martin Kania 38mm QR-CBC 51 GU5,3 140741mcgy 59mm Swivel range 2 x 180 For light-optical fittings, see page 55 100 www.bruck.de Box 70396 10724 STOCKHOLM SWEDE

EZIS CLASSIC / SPOT 3 Design: Martin Kania 38mm QR-CBC 51 GU5,3 124 mm 64mm Parallel with track 41mm 140745mcgy 140755mcgy Parallel with track 90 to track Swivel range 2 x 180, height adjustable For light-optical fittings, see page 55 64mm 38mm 41mm 124 mm 90 to track CLASSIC / PIA DOW Design: Martin Kania 150mm 80mm ca. 1500mm 48h QR-CB 51 GX5,3, glass / without adapter 220141mc matt 220143mc blue 140360mcgy Please order system adapters separately CLASSIC / KIM DOW ca. 1500mm 220112mc 220113mc, glass / without adapter blue white 140360mcgy Please order system adapters separately www.bruck.de 101 Box 70396 10724 STOCKHOLM SWEDE

EZIS 1-CIRCUIT TRACK The EZIS track consists of a silver-coloured plastic section with two embedded flat copper braids each with a cross-section of 5.5 mm 2. This allows a load of 1 x 25 A (300 VA) with a 12 V supply. The track can be bent to shape on site. The minimum radius is 50 mm. Supplied without end caps. 300W / without end caps 8mm BRUCK 24mm 27mm 140006mcgy 140012mcgy 140008mcgy ED CAP 1830 mm 3660 mm 2400 mm, rigid 10mm 140190mcgy SHEARS for cutting the track to length 230990 /A COECTOR 50mm 30mm TRACK COECTOR, conductive 140320mcgy TRACK COECTOR ISO, non conductive 50mm 30mm 140330mcgy ATTACHMET CEILIG SUPPORT, insulated from mounting surface 78 / 156 mm 140180mcgy 140181mcgy, 78 mm, 156 mm 1000mm 25mm 25 mm CABLE SUPPORT, insulated from mounting surface 140100mcgy 25mm 760mm DELTA SUPPORT adjustable from 5-110, insulated from mounting surface 140150mcgy 5-110 POWER FEED 57mm POWER FEED for 4-6 mm 2 cable 140305mcgy 300W 51mm 31mm 90mm 02/06 CEILIG POWER FEED for direct supply from suspended ceilings 140309mcgy 300W ADAPTER 70W 50mm 140360mcgy 102 www.bruck.de Box 70396 10724 STOCKHOLM SWEDE

PLAIG GUIDE Track lengths - Cutting to length Bendability The EZIS track is supplied in standard lengths of 1830 and 3660 mm. on-standard lengths on application. The TRACK is designed to carry a 300 VA circuit. It can be cut to length on site with the shears. The track can be bent to shape on site - no tools are required. The smallest bending radius is 52 mm. Track Track connectors Conductive TRACK COECTORS or insulating TRACK COECTORS ISO. Connectors ISO Ceiling clearances CEILIG ATTACHMET for horizontal or vertical mounting. Cable suspension CABLE SUSPESIOS can be shortened on site. They are used to overcome major differences in height and can be fitted to sloping ceilings. Ceiling support layout Mountings You should allow one support every 700 to 900 mm on straight track runs. Curved track runs require additional supports at changes of direction. Power feed Ceiling power feed POWER FEED supplies the system from an external transformer in conjunction with feeder cable. CEILIG POWER FEED supplies the system from an external transformer in the suspended ceiling. Power feed The ADAPTER can be used with all of the uni-lights in the system. s www.bruck.de 103 Box 70396 10724 STOCKHOLM SWEDE