REVISION V - Spring clamp terminal, Datasheet panel mount pole Features Panel / flush mount Sturdy spring clamp terminals Twin connection per relay contact Suitable for all D and KDN relay series Easy & quick installation (up to % reduction of wiring time) Positive mechanical keying Trifurcated female receiver for tight grip relay pin Clear terminal ID Benefits Description GEN. ± ± ± mm LINEAR ANGLE V HOLES DIMENSIONS IN: FILENAME: SHEET OF SCALE: DRAWN BY: CHECKED: DATE: V : AV -0-0 THIRD ANGLE PROJECTION The V is a panel/flush mount relay. The V has a base PROPERTY OF NIEAF-SMITT BV UTRECHT - THE NETHERLANDS. DISCLOSURE TO THIRD PARTIES OR COPYING/ with two highly reliable spring clamp terminals per relay contact, so REPRODUCTION IN ANY FORM WHATSOEVER, IS NOT PERMITTED WITHOUT THE WRITTEN PERMISSION OF THE OWNER I:\TI\Inventor\Relais\Voeten\V WAGO voet achter\v\v.iam looping/daisy chaining can be done on the an no external connector or terminal is needed. The spring clamp terminal makes a quick connection possible by pressing the spring with a flat-bladed screwdriver and inserting the stripped wire. Solid and (fine) stranded wires up to.mm can be inserted in the spring clamp terminals. This quick & easy wiring method saves up to % wiring time. Pinning on the complies with the pinning on the relay. To prevent fault relay placement the can be equipped with mechanical keying to accept only designated identical keyed relays. DATE NAME SIZE A Proven reliable Long term availability Easy to maintain Low life cycle cost No maintenance Industry compliancy EN 0-- - Electromechanical control circuit devices and switching elements IEC 0 - Electromechanical elementary relays Clear UP arrow for correct mounting. Application The V relay is suitable for general industrial applications with a space saving design. Installation and replacement of relays is made easy and cost saving. No maintenance is required for the user. Suitable for all D and KDN relay series.
V Technical specifications Technical characteristics Contact rating 0 A Dielectric strength IEC 0 / IEC 0, 00 V, 0 Hz, min Protecting category IEC 0, IP0 Mounting Panel mounting Max. ambient temperature 0 C Weight g Dimensions 0 x. x. mm (depth is mm from front of panel) Wire size 0.0 -. mm Wire stripping length -0 mm Material Polyamide, 0% glass Socket contacts Spring terminal Max. torque value mounting screws Nm Accessories A0 Key receptacle Connection diagram Bottom 0 0 0 0
0 0 0 0 REVISIE REVISIE V Technical specifications Dimensions,,, Keying holes, Top,,, R0,,, Top, Bottom Keying holes Top,, Keying holes R0,,, Hole pattern R0, Bottom Bottom Keying holes ALG. LINEAIR HOEK GATEN MAATEENHEID: FILENAAM: BLADEN BLAD SCHAAL: GETEKEND: mm Tek voor datasheet : AV Voor datasheet V Hole pattern Hole pattern EIGENDOM VAN NIEAF-SMITT BV TE UTRECHT. VERMENIGVULDIGING OF MEDEDELING AAN DERDEN, IN WELKE VORM DAN OOK, IS ZONDER SCHRIFTELIJKE TOESTEMMING VAN EIGENARES NIET GEOORLOOFD. I:\TI\Inventor\Relais\Voeten\V WAGO voet achter\v\v.iam GECONTR.: AMERIKAA Top,,,, R0, Bottom ALG. LINEAIR HOEK GATEN MAATEENHEID: FILENAAM: BLADEN BLAD mm Tek voor datasheet Voor datasheet V IN WELKE VORM DAN OOK, IS ZONDER SCHRIFTELIJKE TOESTEMMING VAN EIGENARES NIET GEOORLOOFD. ALG. LINEAIR HOEK GATEN MAATEENHEID: FILENAAM: BLADEN BLAD SCHAAL: GETEKEND: mm Tek voor datasheet : AV DATUM SCHAAL: GETEKEND: GECONTR.: DATUM: Voor : datasheet AV V NAAM AMERIKAANSE PROJECTIE FORMAAT EIGENDOM VAN NIEAF-SMITT BV TE UTRECHT. VERMENIGVULDIGING OF MEDEDELING AAN DERDEN, IN WELKE VORM DAN OOK, IS ZONDER SCHRIFTELIJKE TOESTEMMING VAN EIGENARES NIET GEOORLOOFD. Hole pattern I:\TI\Inventor\Relais\Voeten\V WAGO voet achter\v\v.iam EIGENDOM VAN NIEAF-SMITT BV TE UTRECHT. VERMENIGVULDIGING OF MEDEDELING AAN DERDEN, A GECONTR.: AMERIKAA I:\TI\Inventor\Relais\Voeten\V WAGO voet achter\v\v.iam Dimensions in mm, tolerance + 0. mm,, ALG. LINEAIR HOEK GATEN MAATEENHEID: FILENAAM: BLADEN BLAD mm Tek voor datasheet Voor datasheet V SCHAAL: : GETEKEND: AV DATUM NAAM GECONTR.: DATUM: AMERIKAANSE PROJECTIE FORMAAT A
V Technical specifications Tri-furcated female receiver for tight grip relay pin V Spring terminal relay for contact relays (all D-relay series) For details see datasheet V.
Positions of placement possible Positions of placement possible Positions of placement possible Positions of placement possible V Keying Mechanical keying relay and (optional) Function: To prevent wrong installation To prevent damage to equipment To prevent unsafe situations Using keyed relays and s prevents a relay being inserted in a wrong. For example it prevents placing a VDC relay in a 0 VDC circuit. Positive discrimination is possible per different funtion, coil voltage, timing, monitoring, safety and non-safety. The D-relays keying option gives x = possibilities. Upon ordering the customer simply indicates the need for the optional keying. Mors Smitt will assign a code to the relay and fix the pins into the relay. The s are supplied with loose key receptacles. Inserting the keys into the is very simple and self explaining. Remark: and relay type are only examples. Top Bottom relay Key receptacle B H D F E 0 S T Z V X Key receptacle keying pin F D G C H B 0 X V Y U Z T keying pin Left Right Left Right A C U B D T V H G E S F Z Example keying position G-Z on Y X W A G Y H Z X F E T V B D C U Example keying position G-Z on relay S W
V Technical specifications Installation & inspection Installation Before installation or working on the relay: disconnect the power supply first! Install and connect wiring according to the terminal identification. Plug relay into the ensuring there is no gap between the bottom of relay and the. Reverse installation into the is not possible due to the mechanical blocking snap-lock feature. No external retaining clip needed as the snap-lock will hold the relay into the under all circumstances and mounting directions (according shock & vibration requirements IEC, Category I, Class B, Body mounted). Warning! - To remove relays from the, employ up and down lever movements. Sideway movement may cause damage to the coil wires. When plugging the relay into the, the female trifurcated receivers will automatically cut through the corrosion on the pins and guarantee a reliable connection. Inspection If the does not work after inspection of the correct wiring and relay connection, replace the unit with a similar model. When returning products for investigation, please provide all information on the RMA form. Send defective products back to the manufacturer for repair or replacement. Normal wear and tear or external causes are excluded from warranty.
V Ordering possibilities V V A0 Article nr Code Description 0000 V Spring terminal relay for contact relays 0000 V Spring terminal relay 000 A0 Key receptacle
DS-V Ind V.0 Feb 0 Mors Smitt France SAS Tour Rosny, Avenue du Général de Gaulle, F - Rosny-sous-Bois Cedex, France T + (0) 0, F + (0) 00 E sales@msrelais.com Mors Smitt Asia Ltd. # 0, Billion Trade Centre, Hung To Road Kwun Tong, Kowloon, Hong Kong T +, F + E info@morssmitt.hk Mors Smitt B.V. Vrieslantlaan, AA Utrecht, Netherlands T + (0)0, F + (0)0 E sales@nieaf-smitt.nl Mors Smitt Technologies inc. 0 Sackett Point Road North Haven, Ct 0, USA T + (0), F + () E mstechnologies@msrelais.com Mors Smitt UK Ltd Doulton Road, Cradley Heath West Midlands, B QB, UK T + (0), F + (0) 0 E info@morssmitt.co.uk (c) Copyright 0 All rights reserved. Nothing from this edition may be multiplied, or made public in any form or manner, either electronically, mechanically, by photocopying, recording, or in any manner, without prior written consent from Mors Smitt. This also applies to accompanying drawings and diagrams. Due to a policy of continuous development Mors Smitt reserves the right to alter the equipment specification and description outlined in this datasheet without prior notice and no part of this publication shall be deemed to be part of any contract for the equipment unless specifically referred to as an inclusion within such contract.