product data sheet Created by a visionary Emperor based on a design by an Italian architect, St. Petersburg, Russia s window on the West and door to the East, has always been a centre for economic and cultural activity as well as a laboratory for urban and architectural projects. With its bright metal frame combined with the warmth of the wood and leather, desks are leading players in this scenario, in harmony with tradition and innovation with an irresistibly prestigious grain.
EXPLODED VIEW LEGENDE TOPS 1 2 1. Desk Top 2. Pad 3. Structure 4. Modesty 5. Cable tray panel 6. Panelled leg 7. Grommet 1 2 6 4 3 5 Wood top made out of wood fibre panels, class E1, 19 mm thick with natural oak finish veneer. They have a 1.4 mm thick wood border that match the surface and are painted with opaque finish acrylics. Using a special process that attaches the top to the outer leg panel at a 45 angle, 5 mm of thickness is visible. Melamine tops: made with wood fibre panels, 18 mm thick, faced in melamine, class E1, with 1mm thick ABS edging to match the surface. Using a special process that attaches the top to the outer leg panel at a 45 angle, 4 mm of thickness is visible. Lacquered tops: made of hardboard panels, 18 mm thick, covered in class E1 melamine, bordered with ABS edges 1 mm thick, painted with polyurethane paint. The finish can be brushed matt or glossy. The tops, thanks to a special process that unites them at 45 to the outer panel of the leg, leave exposed a thickness of 4 mm. DIMENSIONS 240 60 120 60 100 60 40 40 2 100 160 60 60 1 LEATHER TOPS OPTIONS 6 5 7 3 1 Insert in central position only for single desk 1 Insert in central position only 3 Inserts for single desk 2 Inserts for desk with return for desk with return 2 www.sinetica.com www.sinetica.com 3
STRUCTURE 3 MODESTY 4 Leg: comprised of two lateral uprights made from one vertical and one horizontal profile, both in T-shaped extruded aluminium, connected at a 45 angle with an expansion joint in die-cast zamak. The leg is finished with a lower crosspiece that is screwed to the two lateral uprights. The leg is oxidized and polished. A special black plastic adjustable foot allows 10 mm micro-adjustments. Perimeter profiles: T-shaped extruded aluminium attached to the leg using an aluminium joint that is not visible once it is mounted to the structure. The profiles are oxidized and polished. Middle crosspieces: the structure is completed with two anodized aluminium supporting crosspieces, 3 mm thick, 87x34.5mm sec. that attach to the perimeter profiles using 2 clamps in die-cast zamak. Wood modesty panels: made out of wood fibre panels, class E1, 19 mm thick with natural oak finish veneer. They have a 0.6 mm thick wood border that match the surface and are painted with opaque finish acrylics. Melamine modesty panels: made with wood fibre panels, 18 mm thick melamine-faced, class E1, with 1 mm thick ABS edging the same colour as the surface. The colours are the same as the desktop finishes. Modesty lacquered panel: made of hardboard panels 18 mm thick laminated with melamine, class E1, bordered with ABS edge 1 mm thick, coated with polyurethane paint. The finish can be brushed matt or glossy. The finish colours match those of the tops. The modesty panel is anchored to the desk structure using connecting brackets. DIMENSIONS 209 58,5 FRONTAL VIEW TOP VIEW PANELLED LEG 6 COFFEE TABLES External/ Internal wood leg panels: made out of wood fibre panels, class E1, 19 mm thick with natural oak finish veneer. They have a 1.4 mm thick wood border that match the surface and are painted with opaque finish acrylics. External/ Internal melamine leg panels: made with wood fibre panels, 18 mm thick, faced in melamine, class E1, with 1mm thick ABS edging to match the surface. External/ Internal leg lacquered panels: made of hardboard panels, 18 mm thick, covered in class E1 melamine, bordered with ABS edges 1 mm thick, painted with polyurethane paint. The finish can be brushed matt or glossy. The external upper edge of the panel has a special 45 processing that allows the junction with tops. Fixing to the steel structure takes place through screws and bushings; so the panel can be removed and the compartment can be inspected. The internal panel can come with optional grommet. The panel has a cable gland in the lower part for feeding cables through. Wooden frame and tops: made with wood fiber panels, class E1, th. 39mm and veneered with natural wood, oak and walnut finish, framed with a wooden edge with a thickness of 1.4mm the same colour as the surface and coated with polycrylic matte finish varnish. Lacquered frame and tops: made with wood fiber panels, class E1, th. 38mm and melamine ennobled, framed with ABS edges with a thickness of 2mm, coated with polyurethane varnish. Matte or glossy finish. Leather tops: made with wood fiber panels, class E1, th. 38mm and melamine ennobled, framed with ABS edges with a thickness of 2mm. Upholstered in leather. Faux leather tops: made with wood fiber panels, class E1, th. 38mm and melamine ennobled, framed with ABS edges with a thickness of 2mm. Upholstered in leather. 4 www.sinetica.com www.sinetica.com 5
WIRING DESK OPTION 1 PASSACAVI STANDARD Rectangular grommet to be fitted in the internal bottom part of the inspectable panel leg standard scrivania singola standard scrivania con dattilo OPTION 1 Rectangular grommet to be fitted in the external top part of the inspectable panel leg opzionale 1 scrivania singola con passacavi esterno opzionale 1 scrivania con dattilo con passacavi esterno OPTION 2 OPTION 2 Flip top to be fitted on the desk top Flip Top : the upper base consists of an aluminium and ABS frame with a smooth, dual opening cover and bristle opzionale 2 brush to allow quick connection of the equipment opzionale to the mains 2 and/or data network. The cable guide has a steel scrivania singola tray for attaching multiple sockets. Oxidized, polished scrivania finish. con dattilo con flip top soprapiano con flip top soprapiano Cable gland: made out of ABS, it has 2 pieces, a lower base and snap-in door. Together they make up the finished element and with a 70 x 40 compartment ensure that plugs can pass through. The cable gland is located on the internal leg panel. It has a chrome finish. 6 www.sinetica.com www.sinetica.com 7
FINISHES COMBINATIONS FINISHES TOPS - PANELLED LEG MELAMINE 27 WALNUT VENEER RC COOKED OAK TOP walnut PANELLED LEG noce canaletto TOP cooked oak PANELLED LEG cooked oak TOP white lacquered PANELLED LEG white lacquered PRESTIGE LACQUERED NCS S NCS S NCS S NCS S 0502 Y 4005 Y50R 5502 R 7502 R WHITE DOVE-GREY CEMENT-GREY LEAD-GREY PAD STRUCTURE METAL 21 BRILL LEATHER - Real Bovine Finished Leather. Corrected Grain Consistency. Madras Grain. TOP walnut PAD grey eco-leather PANELLED LEG walnut TOP cooked oak PAD balck leather PANELLED LEG cooked oak TOP white lacquered PAD beige leather PANELLED LEG white lacquered 01 WHITE 03 CREAM 28 BEIGE 25 DOVE-GREY 26 LIGHT BROWN 27 LEATHER 29 TESTA DI MORO 20 DARK GREY 02 BLACK 68 BLUE 08 YELLOW 37 ORANGE 34 RED 41 VIOLET 44 GREEN ECO-LEATHER - 100% Polyester Trevira Cs. Flammability 1Im Class. 01 WHITE 03 CREAM 28 BEIGE 23 LIGHT GREY 24 GREY 20 DARK GREY 42 BROWN 29 DARK BROWN 02 BLACK 08 YELLOW TOP dove-grey lacquered PAD black leather PANELLED LEG dove-grey lacquered TOP cement-grey lacquered PAD cream leather PANELLED LEG cement-grey lacquered TOP lead-grey lacquered PAD pelle beige PANELLED LEG lead-grey lacquered 37 ORANGE 34 RED 68 BLUE 41 VIOLET 44 GREEN 8 www.sinetica.com www.sinetica.com 9
CERTIFICATION ENVIRONMENT The main Sinetica target is to consider the environment respect as main part of its activity. For this reason Sinetica has decided to use an Enviromental Magament System (SGA) compliant with the UNI EN ISO 14001:2004 Cert. n 7672 Certificazione ISO 14001 QUALITY Sinetica production is followed by the Sinetica technician team in all production phases,they verify and assure the adequate technologic development,the engineering and quality, trying to meet the final customer needs and his expectation with the utilized industrial processes. Every production phase is daily pointed out: from the study and the choice of the row materials, to production and the services supplied. Sinetica has a Quality Company System that is compliant with UNI EN ISO 9001:2008 obtaining and maintaining the Certification from an accredited Organism. Cert. n 7672 Certificazione ISO 9001 FSC Furthermore Sinetica, in order to protect the environment and the ethical values in which believes, has obtained an international standard certification FSC (FOREST STEWARDSHIP COUNCIL) which is a warranty for the final customer that the product bought is coming directly or indirectly from certificated forests. FIRE BEHAVIOUR According to regulations EN 13501-1 CLASSIFICATION D-S2, D0. 10 www.sinetica.com