THOMAS SAMUEL THOMAS SAMUEL Bauart gepruft Sicherheit egelma ge od o s be wac g www. tuv.com ID 00000000 150W Constant Voltage Constant Current LED Driver (except for AB,Dtype) IS 15885(Part /Sec13) R4107766 (for 1B,4B,36A,54A only) IP65 IP67 Metal housing with class I design Ⅰ current output. HLG150H operates from 90~305VAC and offers models with different rated voltage ranging between 1V and 54V. Thanks to the high efficiency up to 94%, with the fanless design, the entire series is able to operate for 40 ~ 90 case temperature under free air convection. The design of metal housing and IP67/IP65 ingress protection level allows this series to fit both indoor and outdoor applications. HLG150H is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for LED lighting system. I I B I D File Name:HLG150HSPEC 18087
SPECIFICATION MODEL HLG150H1 HLG150H15 HLG150H HLG150H4 HLG150H30 HLG150H36 HLG150H4 HLG150H48 HLG150H54 DC VOLTAGE 1V 15V V 4V 30V 36V 4V 48V 54V CONSTANT CURRENT REGION Note.4 6 ~1V 7.5 ~ 15V 10 ~ V 1 ~ 4V 15 ~ 30V 18 ~ 36V 1 ~ 4V 4 ~ 48V 7 ~ 54V RATED CURRENT 1.5A 10A 7.5A 6.3A 5A 4.A 3.6A 3.A.8A RATED POWER 150W 150W 150W 151.W 150W 151.W 151.W 153.6W 151.W RIPPLE & NOISE (max.) Note. 150mVpp 150mVpp 150mVpp 150mVpp 0mVpp 0mVpp 0mVpp 0mVpp 0mVpp OUTPUT VOLTAGE ADJ. RANGE Adjustable for A/ABType only (via builtin potentiometer) 10.8 ~ 13.5V 13.5 ~ 17V 17 ~ V ~ 7V 7 ~ 33V 33 ~ 40V 38 ~ 46V 43 ~ 53V 49 ~ 58V CURRENT ADJ. RANGE Adjustable for A/ABType only (via builtin potentiometer) 7.5 ~ 1.5A 6 ~ 10A 4.5 ~ 7.5A 3.8 ~ 6.3A 3 ~ 5A.5 ~ 4.A.16 ~ 3.6A 1.9 ~ 3.A 1.68 ~.8A VOLTAGE TOLERANCE Note.3 ±.5% ±.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% LINE REGULATION ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% LOAD REGULATION ±.0% ±1.5% ±1.0% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% SETUP, RISE TIME Note.6 1000ms,0ms/115VAC 500ms,0ms/30VAC HOLD UP TIME (Typ.) 16ms / 115VAC, 30VAC VOLTAGE RANGE Note.5 90 ~ 305VAC 17 ~ 431VDC (Please refer to "STATIC CHARACTERISTIC" section) FREQUENCY RANGE POWER FACTOR (Typ.) 47 ~ 63Hz PF 0.98/115VAC, PF 0.95/30VAC, PF 0.9/77VAC @ full load (Please refer to " POWER FACTOR (PF) CHARACTERISTIC" section) THD< % (@ load 60% / 115VAC,30VAC; @ load 75% / 77VAC) TOTAL HARMONIC DISTORTION INPUT (Please refer to " TOTAL HARMONIC DISTORTION (THD)" section) EFFICIENCY (Typ.) 91.5% 9% 93% 93% 93.5% 93.5% 94% 94% 94% AC CURRENT (Typ.) 1.7A / 115VAC 0.75A / 30VAC 0.7A / 77VAC INRUSH CURRENT (Typ.) MAX. No. of PSUs on 16A CIRCUIT BREAKER COLD START 65A(t width=45 μs measured at 50% I peak) at 30VAC; Per NEMA 410 4 units (circuit breaker of type B) / 7 units (circuit breaker of type C) at 30VAC LEAKAGE CURRENT OVER CURRENT <0.75mA / 77VAC 95 ~ 108% Constant current limiting, recovers automatically after fault condition is removed SHORT CIRCUIT Constant current limiting, recovers automatically after fault condition is removed PROTECTION 14 ~ 17V 18 ~ 1V 3 ~ 7V 8 ~ 34V 34 ~ 38V 41 ~ 46V OVER VOLTAGE Shut down o/p voltage with autorecovery or repower on to recovery 47 ~ 53V 54 ~ 63V 59 ~ 65V OVER TEMPERATURE Shut down o/p voltage, recovers automatically after temperature goes down WORKING TEMP. Tcase= 40 ~ 90 (Please refer to "OUTPUT LOAD vs TEMPERATURE" section) MAX. CASE TEMP. Tcase= 90 ENVIRONMENT WORKING HUMIDITY ~ 95% RH noncondensing STORAGE TEMP., HUMIDITY 40 ~ 80, 10 ~ 95% RH TEMP. COEFFICIENT VIBRATION ± 0.03%/ (0 ~ 60 ) 10 ~ 500Hz, 5G 1min./1cycle, period for 7min. each along X, Y, Z axes SAFETY STANDARDS UL8750(type HL ), CSA C. No. 50.008; EN/AS/NZS 613471, EN/AS/NZS 6134713 independent;gb19510.1, GB19510.14; IP65 or IP67; J613471, J6134713, BIS IS15885( for 1B,4B,36A,54A only), EAC TP TC 004; KC KN61347 1, KN61347 13(except for AB,Dtype) approved ; Design refer to UL609501, TUV EN609501 SAFETY & WITHSTAND VOLTAGE I/PO/P:3.75KVAC I/PFG:KVAC O/PFG:1.5KVAC EMC ISOLATION RESISTANCE I/PO/P, I/PFG, O/PFG:100M Ohms / 500VDC / 5 / 70% RH EMC EMISSION EMC IMMUNITY Compliance to EN55015, EN5503 (CISPR3) Class B, EN610003 Class C (@ load 60%) ; EN6100033 GB17743 and GB1765.1, EAC TP TC 0 Compliance to EN610004,3,4,5,6,8,11, EN61547, EN5504, light industry level ( surge immunity LineEarth 4KV, LineLine KV), EAC TP TC 0 MTBF 19.K hrs min. MILHDBK17F (5 ) OTHERS DIMENSION 8*68*38.8mm PACKING 1.15Kg; 1pcs/14.8Kg/0.8CUFT NOTE File Name:HLG150HSPEC 18087
BLOCK DIAGRAM Fosc : 100KHz I/P FG EMI FILTER & RECTIFIERS PFC CIRCUIT PFC CONTROL O.L.P. O.T.P. POWER SWITCHING PWM CONTROL RECTIFIERS & FILTER O.L.P. DETECTION CIRCUIT O.V.P. V V DIM DIM (B Type) DRIVING METHODS OF LED MODULE This series is able to work in either Constant Current mode (a direct drive way) or Constant Voltage mode (usually through additional DC/DC driver) to drive the LEDs. 100 In the constant current region, the highest voltage at the output of the driver depends on the configuration of the end systems. Vo(%) (A) Constant Voltage area (B) Constant Current region Should there be any compatibility issues, please contact MEAN WELL. 50 100 Io (%) Typical output current normalized by rated current (%) File Name:HLG150HSPEC 18087
DIMMING OPERATION AC/N(Blue) HLG150H DIM(Blue) DIM(White) V(Black) V(Red) 3 in 1 dimming function (for B/ABType) Output constant current level can be adjusted by applying one of the three methodologies between DIM and DIM: 1 ~ 10VDC, or 10V PWM signal or resistance. Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers. Dimming source current from power supply: 100μA (typ.) Applying additive 1 ~ 10VDC V V DIM DO NOT connect "DIM to V" Additive Voltage Output current (%) 100% 90% 80% 70% 60% 50% 40% 30% % 10% 1V V 3V 4V 5V 6V 7V 8V 9V 10V Dimming input: Additive voltage DIM Applying additive 10V PWM signal (frequency range 100Hz ~ 3KHz): V V DIM Additive PWM signal DIM DO NOT connect "DIM to V" Output current (%) 100% 90% 80% 70% 60% 50% 40% 30% % 10% 10% % 30% 40% 50% 60% 70% 80% 90% 100% Duty cycle of additive 10V PWM signal dimming input Applying additive resistance: V V DIM DIM Additive Resistance Output current (%) 100% 90% 80% 70% 60% 50% 40% 30% DO NOT connect "DIM to V" % 10% 10K/N K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N (N=driver quantity for synchronized dimming operation) Dimming input: Additive resistance File Name:HLG150HSPEC 18087
Note: In the case of turning the lighting fixture down to 0% brightness, please refer to the configuration as follow, or please contact MEAN WELL for other options. N FG L Relay Switch Adjuster 10K/N~100K/N Ohms resistance 1~10V DC Voltage 10V PWM Signal Green/ Yellow Brown Blue AC/L AC/N HLG150H BType DIM DIM V() V() Blue White Black Red LED Lighting Fixture Using a switch and relay can turn ON/OFF the lighting fixture. File Name:HLG150HSPEC 18087
OUTPUT LOAD vs TEMPERATURE(Note.10) 100 100 80 80 60 60 LOAD (%) 40 LOAD (%) 40 40 5 10 0 15 30 50 60 70 (HORIZONTAL) 40 5 0 45 55 65 75 90 (HORIZONTAL) AMBIENT TEMPERATURE,Ta ( ) Tcase ( ) STATIC CHARACTERISTICS POWER FACTOR(PF) CHARACTERISTIC Tcase at 80 100 Constant Current Mode 90 LOAD (%) 80 70 60 50 40 90 100 15 135 145 155 165 175 180 0 30 305 INPUT VOLTAGE (V) 60Hz PF 1.00 0.98 0.96 0.94 0.9 0.90 0.88 0.86 0.84 0.8 0.80 0.78 50% 60% 70% 80% 90% 100% 77Vac 30Vac 115Vac LOAD (150W) Derating is needed under low input voltage. TOTAL HARMONIC DISTORTION (THD) 48V Model, Tcase at 80 5 EFFICIENCY vs LOAD possess superior working efficiency that up to 94% can be reached in field applications. 48V Model, Tcase at 80 94 90 THD(%) 15 10 5 77VAC 30VAC 115VAC EFFICIENCY (%) 86 8 78 74 77Vac 30Vac 115Vac 0 50% 60% 70% 80% 90% 100% 70 10% % 30% 40% 50% 60% 70% 80% 90% 100% LOAD LOAD File Name:HLG150HSPEC 18087
LIFE TIME 1 100 80 LIFETIME(Kh) 60 40 0 30 40 50 60 70 80 90 Tc a s e ( ) File Name:HLG150HSPEC 18087
MECHANICAL SPECIFICATION Case No.954D Unit:mm Blank/DType 1 9.6 8 4 AC/N(Blue) AType AC/N(Blue) SJOW 17AWG&H05RNF 1.0mm *3C SJOW 17AWG&H05RNF 1.0mm *3C 1 9.6 9.4 9.4 34. 9.4 9.4 34. 68 68 Tcase 34 tc : Max. Case Temperature 8 4 Tcase 34 10 10 SJOW 17AWG&05RNF 1.0mm *C (SJOW 14AWG*C for 1V) ψ4. 4PL 38.8 38.8 tc tc Vo ADJ. Io ADJ. SJOW 17AWG&05RNF 1.0mm *C (SJOW 14AWG*C for 1V) ψ 4. 4PL V(Black) V(Red) V(Black) V(Red) tc : Max. Case Temperature File Name:HLG150HSPEC 18087
BType 1 9.6 8 4 AC/N(Blue) SJOW 17AWG&H05RNF 1.0mm *3C 9.4 34. 9.4 68 Tcase tc 34 tc : Max. Case Temperature 10 UL517 AWG*C SJOW 17AWG&05RNF 1.0mm *C (SJOW 14AWG*C for 1V) ψ 4. 4PL ABType 1 9.6 8 4 AC/N(Blue) SJOW 17AWG&H05RNF 1.0mm *3C 38.8 38.8 DIM(Blue) DIM(White) V(Black) V(Red) 9.4 34. 9.4 68 Tcase tc 34 tc : Max. Case Temperature Vo ADJ. 10 Io ADJ. UL517 AWG*C SJOW 17AWG&05RNF 1.0mm *C (SJOW 14AWG*C for 1V) ψ 4. 4PL DIM(Blue) DIM(White) V(Black) V(Red) File Name:HLG150HSPEC 18087
WATERPROOF CONNECTION Waterproof connector Waterproof connector can be assembled on the output cable of HLG150H to operate in dry/wet/damp or outdoor environment. AC source I/P HLG150H O/P Size Pin Configuration (Female) Size Pin Configuration (Female) M1 Order No. Suitable Current 4PIN 5A/PIN M104 10A max. 5PIN 5A/PIN M105 10A max. M15 Order No. Suitable Current PIN 1A/PIN M150 1A max. LED Lamp Cable Joiner 66 6 CJ041 suitable for 14AWG~16AWG CJ04 suitable for 18AWG~AWG ψ5 Up to four wires can be connected through this cable joiner by soldering or clamping by tools. LED Lamp HLG150H O/P Wires CJ04 cable joiner can be purchased independently for user's own assembly. MEAN WELL order No. : CJ041, CJ04. Junction Box Option 4 366 76 10 5 V AC/N(Blue) V 68 8.5 8.5 6 ψ5 3 PF 1/" 150± 35 38.8 61 3 3 PF 1/" 150± Junction box option is available for A / Blank Type. Please contact MEAW WELL for details. 86 INSTALLATION MANUAL Please refer to : http://www.meanwell.com/manual.html File Name:HLG150HSPEC 18087