If you are thinking of quality in stable s equipment, the first thing that should come to your mind is the Remtor brand. For many years, we have been providing equipment of highest quality to our customers. Our rich offer of horse stalls allows you to choose the best solution for every stable. When designing our products, we focus on functionality and maximum safety of your horses. As a result of this work, we create horse stalls that are very comfortable and ergonomic. We introduce innovations based on observations and experience of our clients, therefore the Remtor brand gained high recognition among horse breeders and horse lovers throughout Europe.
Fillings and Colours Pressure Treated Pine - Filling with Pressure Treated Pine boards, thickness of 42 mm. In addition to protection of wood against bark beetles and other insects, pressure impregnation (autoclave) increases the resistance of wood against moist, frost or sunlight. This filling is very practical and durable. All boards connected using tongue and groove interlocking system. Plastic Boards - Filling with Plastic Boards, thickness of 32 mm. Artificial boards are a universal and durable filling. All boards connected using tongue and groove interlocking system. Green Cream Bamboo - Filling with bamboo wood, thickness of 32 mm. Bamboo is characterised by an unusual hardness and strength. This filling is very resistant and elegant. All boards connected using tongue and groove interlocking system. Light gray Grey Black Red Iron Wood - Filling with Red Iron Wood, thickness of 32 mm. Red Iron Wood (Bongossi) is characterised by extreme resistance and strength. This filling in very appreciated by horse breeders throughout Europe. All boards connected using tongue and groove interlocking system. Light Brown Brown Dark Brown Colours of Paints We use special polyester paints to paint our products; the paints are resistant to weather conditions and to an increased ammonia content in the air. Therefore, our products maintain their original colour and are resistant to corrosion. Standard Colours Dark Green (RAL 6005) Brown (RAL 8007) Maroon (RAL 3005) Navy Blue (RAL 5003) Anthracite (RAL 7016) It is possible to paint the elements with other colours included in the RAL palette.
Stable with metal support frame. Thickness of walls 50 mm. Hot-dipped galvanized frame. Roof covered with Eurowave sheets, in grey or coloured, interspersed with colourless plates (skylights). Sliding gate at the entrance and exit. Option to extend stables. Stable equipped with any type of boxes of the Remtor range. Design adapted to individual needs of the customer. Options - accessories, opened front walls and partition walls equipped with the Easy Cleaning System, which enables mechanical disposal of bedding, and creation of a double boxes, if necessary. Phase 1 Phase 2 Phase 3 Phase 4 Phase 5 Phase 6 Phase 7 Phase 8
Champion Front wall 2,30 m high with sliding doors. Opening window for horse s head in the upper part of the door. Feeding slot in standard or optional rotating trough. Practical opening of doors in a pull down bar, and two locks at the bottom of the doors in the case of impact caused by a horse. To provide maximum safety, the upper beam is made of closed profile of 50x50 mm. Hot-dipped galvanized frame made of profiles of 50x50 mm. All bars 25 mm thick. Selection of the following fillings: Pressure Treated Pine 42 mm, Bamboo 32 mm, Red Iron Wood (Bongossi) 32 mm or Plastic Boards 32 mm. More about fillings in the section Fillings and Colours. Front walls of non-standard dimensions may be ordered. Champion version with a rotating trough Drawing on the experience of our customers, we decided to change the structure of feeding slot beginning from 2013; it will now be built in the lower part of the Front wall. The frame of rotating troughs will be made entirely of metal and will be constructed in such a way as to enable rotation using one hand. Champion version with feeding slot
Texas Front wall 2,30 m high with sliding doors. Horizontal bars instead of the vertical grating. Feeding slot in standard or optional rotating trough. Practical opening of doors in a pull down bar, and two locks at the bottom of the doors in the case of impact caused by a horse. To provide maximum safety, the upper beam is made of closed profile of 50x50 mm. Hot-dipped galvanized frame made of profiles of 50x50 mm. All bars 25 mm thick. Selection of the following fillings: Pressure Treated Pine - 42 mm, Bamboo - 32 mm, Red Iron Wood (Bongossi) - 32 mm or Plastic Boards - 32 mm. More about fillings in the section Fillings and Colours. Front walls of non-standard dimensions may be ordered. Texas version with feeding slot Hamburg Front wall 2,30 m high with sliding doors. A triangular cut-out in the shape of the letter V in the upper part of the door. Feeding slot in standard or optional rotating trough. Practical opening of doors in a pull down bar, and two locks at the bottom of the doors in the case of impact caused by a horse. To provide maximum safety, the upper beam is made of closed profile of 50x50 mm. Hot-dipped galvanized frame made of profiles of 50x50 mm. All bars 25 mm thick. Selection of the following fillings: Pressure Treated Pine - 42 mm, Bamboo - 32 mm, Red Iron Wood (Bongossi) - 32 mm or Plastic Boards - 32 mm. More about fillings in the section Fillings and Colours. Front walls of non-standard dimensions may be ordered. Hamburg version with feeding slot
Berlin 1 Front wall with single door, Opening window for horse s head in the upper part of the door. Berlin 2 Front wall with Two part door Berlin 3 Partially built-up front wall with Two part door Berlin 4 Completely built-up front wall with Two part door Berlin Front walls 2,30 m high with opened doors, completely or partially built-up. Single or Two part door with adjustable hinges. An automatic sliding lock in the lower part of the door and an additional lock at the bottom of the door. To provide maximum safety, the upper beam is made of closed profile of 50x50 mm. Hot-dipped galvanized frame made of profiles of 50x50 mm. All bars 25 mm thick. Feeding slot in standard or optional rotating trough. Selection of the following fillings: Pressure Treated Pine - 42 mm, Bamboo - 32 mm, Red Iron Wood (Bongossi) - 32 mm or Plastic Boards - 32 mm. More about fillings in the section Fillings and Colours. Front walls of non-standard dimensions may be ordered.
Hannover Front wall 2,30 m high with opened doors. Two part door with adjustable hinges. Opening of the upper part of the door built in the pull down bar, so that the upper part may be opened separately or together with the lower part of the door. The lower part of the door is equipped with an automatic sliding lock and an additional lock at the bottom of the door. To provide maximum safety, the upper beam is made of closed profile of 50x50 mm. Feeding slot in standard or optional rotating trough. Hot-dipped galvanized frame made of profiles of 50x50 mm. All bars 25 mm thick. Selection of the following fillings: Pressure Treated Pine - 42 mm, Bamboo - 32 mm, Red Iron Wood (Bongossi) - 32 mm or Plastic Boards - 32 mm. More about fillings in the section Fillings and Colours. Front walls of nonstandard dimensions may be ordered. Hannover version with feeding slot York Front wall 2,30 m high with opened doors. Door with adjustable hinges. An automatic sliding lock in the door and an additional lock at the bottom of the door. Hot-dipped galvanized frame made of profiles of 50x50 mm. All bars 25 mm thick. Feeding slot in standard or optional rotating trough. Selection of the following fillings: Pressure Treated Pine - 42 mm, Bamboo - 32 mm, Red Iron Wood (Bongossi) - 32 mm or Plastic Boards - 32 mm. More about fillings in the section Fillings and Colours. Front walls of non-standard dimensions may be ordered. York version with feeding slot Verona Front wall 2,30 m high with sliding doors. The Front wall includes special gaps so that horses may eat hay left in the corridor. Practical opening of doors in a pull down bar, and two locks at the bottom of the doors in the case of impact caused by a horse. To provide maximum safety, the upper beam is made of closed profile of 50x50 mm. Hot-dipped galvanized frame made of profiles of 50x50 mm. All bars 25 mm thick. Selection of the following fillings: Pressure Treated Pine 42 mm, Bamboo 32 mm, Red Iron Wood (Bongossi) 32 mm or Plastic Boards 32 mm. More about fillings in the section Fillings and Colours. Front walls of non-standard dimensions may be ordered. Verona
Partition wall 1 - A wall with grating in the upper part Partition wall 2 - A completely built-up wall Partition walls 2,30 m high. Hot-dipped galvanized frame made of profiles of 50x50 mm. All bars 25 mm thick. To provide maximum safety, the upper beam is made of closed profile of 50x50 mm. Walls adjusted to the Easy Cleaning System with the option to move the walls to the corridor or to fold them to side. Selection of the following fillings: Pressure Treated Pine - 42 mm, Bamboo - 32 mm, Red Iron Wood (Bongossi) - 32 mm or Plastic Boards - 32 mm. More about fillings in the section Fillings and Colours. Walls of non-standard dimensions may be ordered. Partition wall 3 Partition wall 4 Partition wall 5 Partition walls 2,30 m high. Frame hot-dipped galvanized and painted. To provide maximum safety, the upper beam is made of closed profile of 50x50 mm. Walls adjusted to the Easy Cleaning System, with the option to move the walls to the corridor or to fold them to side. Configuration with decorative metal pillars is available. Selection of the following fillings: Pressure Treated Pine - 42 mm, Bamboo - 32 mm, Red Iron Wood (Bongossi) - 32 mm or Plastic Boards - 32 mm. All boards are interlocking boards. More about fillings in the section Fillings and Colours. Walls of non-standard dimensions may be ordered. Partition wall 6 Partition wall 7 Partition wall 8
Bonn Front wall 2,30 m high with opened doors. Frame hot-dipped galvanized and painted. Two part door with adjustable hinges. Rotating trough in standard. An automatic sliding lock in the door and an additional lock built into the frame at the bottom of the door. All bars 25 mm thick. Front wall equipped with three pillars 115 mm in diameter, including decorative balls and discs in gold colour. To provide maximum safety, the upper beam is made of closed profile of 50x50 mm. Selection of the following fillings: Pressure Treated Pine - 42 mm, Bamboo - 32 mm, Red Iron Wood (Bongossi) - 32 mm or Plastic Boards - 32 mm. More about colours and fillings in the section Fillings and Colours. Front walls of non-standard dimensions may be ordered. Stockholm Front wall 2,30 m high with opened doors. Frame hot-dipped galvanized and painted. Door with adjustable hinges. An automatic sliding lock in the door and an additional lock built into the frame at the bottom of the door. All bars 25 mm thick. Rotating trough in standard. Front wall equipped with four pillars 115 mm in diameter, including decorative balls and discs in gold colour. Selection of the following fillings: Pressure Treated Pine - 42 mm, Bamboo - 32 mm, Red Iron Wood (Bongossi) - 32 mm or Plastic Boards - 32 mm. More about colours and fillings in the section Fillings and Colours. Front walls of non-standard dimensions may be ordered. Barcelona Front wall 2,30 m high with opened doors. Frame hot-dipped galvanized and painted. Two part door with adjustable hinges. An automatic sliding lock in the door and an additional lock built into the frame at the bottom of the door. All bars 25 mm thick. Rotating trough in standard. To provide maximum safety, the upper beams are made of closed profile of 50x50 mm. Front wall equipped with four pillars 115 mm in diameter, including decorative balls and discs in gold colour. Selection of the following fillings: Pressure Treated Pine - 42 mm, Bamboo - 32 mm, Red Iron Wood (Bongossi) - 32 mm or Plastic Boards - 32 mm. More about colours and fillings in the section Fillings and Colours. Front walls of non-standard dimensions may be ordered.
Classic Door 1 and 2 - Two part doors 130 cm wide with grating and Plexiglas filling in the upper part. Door leaves with adjustable hinges. The upper part of the door is locked using a latch. The bottom part locked using a double-lock or a latch and additional lock at the bottom. Hot-dipped galvanized frame. The door can be locked using a padlock. Door 3 Door 4 Door 1 Door 2 Classic Door 3 and 4 - Two part doors 130 cm wide with wood filling. Door leaves with adjustable hinges. The upper part of the door is locked using a latch. The bottom part locked using a double-lock or a latch and additional lock at the bottom. Hotdipped galvanized frame. The door can be locked using a padlock. Premium Door - Two part door 130 cm wide. Frame hot-dipped galvanized and painted. Door leaves with adjustable hinges. Thanks to the special latch the glass with the grating can be halfopened inside without opening the upper part of the door. Grating opened for easier access to the glass for cleaning purposes. Rotary knob plus a lockable patent lock in the upper part of the door. Doublelock at the bottom part of the door. More about colours and fillings in the section Fillings and Colours. Premium Window Window 1x1 m with grating, filled with safe laminated glass. Frame hot-dipped galvanized and painted. Doors with adjustable hinges. Thanks to the special latch the window can be half-opened towards inside. Opened grating allows access to the window for cleaning purposes. Rotary knob, and a lockable patent lock used to close the door. More about colours in the section Fillings and Colours. Classic Window 1 Window 1x1 m with grating and Plexiglas filling. Hotdipped galvanized frame. Doors with adjustable hinges. Thanks to the special latch the window can be halfopened towards inside. Solid bolt that can be locked using a padlock. Classic Window 2 Window 1x1 m filled with wood. Hot-dipped galvanized frame. Doors with adjustable hinges. Solid bolt that can be locked using a padlock.
Sliding gate - Double sliding gate. Width of leaves - 1.40 m each. Gate equipped with carriages and upper rail. Hot-dipped galvanized or galvanized and painted frame. Gate - Double gate, height of 2.30, width of 2,50 m. Door leaves with adjustable hinges. Door lock built into the frame in the upper and lower part. The door can be locked using a key. Hot-dipped galvanized or galvanized and painted frame. More about colours and fillings in the section Fillings and Colours. Gates of non-standard dimensions may be ordered. Door 5 - Front wall with door in the middle allowing to make a room in the stable. Sliding doors, mounted on walls. Doors with opened window, equipped with the upper rail, carriages and two locks to be attached on the floor in the case of impact caused by a horse. Door 1,40 m wide, 2,30 m high.
Cast iron drinking trough with pressure tongue, entrance of 1/2. Cast iron self-filling drinking trough, entrance of 1/2. Galvanised trough with relief plug, capacity of 35 litres. Dimensions: height - 23 cm, width - 47 cm, depth - 32 cm. Galvanised corner trough with relief plug. Salt-lick rack Lead rope ring Corner feeding rack Straight feeding rack Galvanised rod, width 110 cm, with racks on sides. Decorative ball with a disc in gold colour. Metal horse head with the height of 30 cm, assembled on decorative pillars. Aluminium Trough Galvanized grating, assembled on walls, the height of 1 m. Rotating frame for trough Decorative metal pillar, diameter of 115 mm.