Medical Division Precision in diagnosis and therapy. Guide wires
Our guide wires are market leaders. Guide wires Guide wires, straight or with J-tip Size Outer Length Wire Core wire/ strip Core wire Distal end Dimension of strip Holding force diameter diameter diameter ground min..018 0,46 mm 220 2000 mm 0,08 mm Wire 0,25 mm 75/30 mm 8 N.020 0,51 mm 220 2000 mm 0,10 mm Wire 0,25 mm 75/30 mm 8 N.021 0,53 mm 220 2000 mm 0,10 mm Wire 0,25 mm 75/30 mm 8 N.024 0,60 mm 220 2000 mm 0,12 mm Wire 0,30 mm 75/30 mm 11 N.025 0,64 mm 220 2000 mm 0,12 mm Wire 0,30 mm 75/30 mm 11 N.028 0,71 mm 300 2000 mm 0,13 mm Wire 0,30 mm 75/30 mm 11 N.032 0,81 mm 300 2600 mm 0,16 mm Wire 0,30 mm 75/30 mm 11 N.035 0,89 mm 300 2600 mm 0,16 mm Wire + strip 0,40 mm 75/30 mm 0,08 x 0,25 mm 15 N.035 0,89 mm 300 2600 mm 0,16 mm Wire 0,43 mm 75/30 mm 15 N.038 0,97 mm 390 2600 mm 0,17 mm Wire + strip 0,43 mm 50/10 mm 0,08 x 0,25 mm 15 N.038 0,97 mm 300 2600 mm 0,17 mm Wire 0,48 mm 75/30 mm 15 N.045 1,14 mm 440 2600 mm 0,20 mm Wire + strip 0,48 mm 75/30 mm 0,08 x 0,25 mm 15 N Variations: J3-tip, proximal end flexible J3-HD, proximal end flexible without strip, welded on both ends Marking according to specification 100 1000 pcs. packed into polybags, non-sterile Core wire in stainless steel or Nitinol Optional: Loaded into dispenser PTA guide wires non-sterile Size Dimension J3/tip Reference No. Ident no. straight.035 0,89 x 1500 mm J3 FD035-1500-J3-PC 207217 straight FD035-1500-PC 207034.038 0,97 x 1500 mm J3 FD038-1500-J3-PC 207219 straight FD038-1500-PC 207036 all executions with proximal end stiff 100 1000 pcs. packed into polybags
Rely on us. PTCA wires PTCA wires non-sterile Type: Flexibility: Length A Ident no. Length B Ident no. FDO14 HF high floppy 208 601 208 628 FDO14 F FDO14 M FDO14 S FDO14 HS floppy medium stiff high stiff 208 600 208 602 208 605 208 606 208 629 208 630 208 631 208 632 FDO14 STF Stent, tip floppy 208 604 208 633 50 100 pcs. in plastic boxes Optional with bent tip Optional: Loaded into dispenser Full length tapered core for excellent pushability 1:1 transmission from the proximal end to the tip High mechanical performance by using laser-welding exclusively PTFE-coating on the shaft plus special coating of distal coil minimizes friction and provides excellent catheter movement Platinum Alloy of distal coil guarantees visibility during x-ray process. Moderate radiopacity of the shaft Gradual tapered tip section offers flexibilities from high floppy to high stiff Special wire with flexible tip to support stent placement Core Wire Layout HF / F / M / S / HS Flexibility STF Dimensions 1750/ 300 mm 30 mm 0.014 (0,36 mm)
Wire offers unlimited possibilities. Customer designed products Reinforcements for tracheal catheters Helix for cardial applications Urethral-prosthesis Stone basket Stone gripper Profound knowledge of precision work is the basis of subassemblies made of wire or strip. Prototypes and pre-series are made to sketch or even experimental data. We machine all stainless steel alloys according to DIN and AISI or common implantables. Healthcare is guaranteed by our high precision methods. Mainly the application of laser systems enables us to produce smooth surfaces in conjunction with low friction, high holding forces and physically acceptable proce dures. Minimal inventional procedures are therefore possible with the stone baskets, grippers and Lunderquist wires. The stiffness of the guide wires can be influenced by a flexible core wire. According to the situation the core wire can be pulled out and even the most difficult situations can be managed. The PTFE-layer of the core wire reduces friction to a minimum. Guide wire with movable core Guide wire according to Lunderquist
Reliability is born by competence. Medical Division Haas Quality is a tradition. Since 1904 the name of Carl Haas stands for high precision products. This knowledge is used in medical engineering intensively. We are concentrating on products made of wire and strips. Profit from our expertise. From raw material to the finished product everything is managed by us. State of art technologies such as laser welding are used in our manufacturing processes. Our knowledge and competence is the result of continuous improvement and guarantees the safe production and quality of Haas products. Reliable Quality. Our knowledge is recognized in medical engineering. In cardiology our products are used in diagnosis and therapy as well. What else can prove the reliability? Our quality management system is certified according to DIN EN ISO 9001 and DIN EN ISO 13485.
Carl Haas GmbH. A company of the KERN-LIEBERS Group. Companies of the KERN-LIEBERS Group Carl Haas GmbH P.O. Box 545 78707 Schramberg Dr. Konstantin-Hank-Str. 18 78713 Schramberg Telephone: 00 49 (0) 74 22/567-0 Fax: 00 49 (0) 74 22/567-239 info@carl-haas.de www.carl-haas.de