easypilot Nordic The turn with brake fitting system. in windows Product Catalog 0/0
Winkhaus easypilot Nordic Table of Contents 0-0 Table of contents Pages Pages 9 Pages 0 Page corners drives Pages Pages Pages 9 Cam keeps/ plates Pages
Winkhaus easypilot Nordic 0-0 easypilot offers scope for rationalization in window production. easypilot: Fittings for turn windows. Developing a new system of fittings from the initial drafts to market maturity is a time-consuming process. It is not just a question of creative ideas, precise calculations and countless series of tests, but also of intensive monitoring of people and markets, evaluating current trends and ongoing analysis of general technical developments. We even question tried and trusted approaches to be able to leverage all this, and apply our years of experience to create targeted, premium solutions that offer fitters and users a whole new range of op-portunities. Both from an economical and functional point of view. It is this constant drive towards precision that has made Winkhaus one of the leading enterprises in the field of window and door technology. This is evident by the large number of industry standards that Winkhaus has established in over 0 years. Individual solutions increase competitiveness The fitting segment easypilot Nordic offers a comprehensive fitting range with just a few components for inwards and outwards opening windows. In line with market requirements, the fitting system enables turn windows to be fixed in any turn opening position. For inwards opening turn windows, the locking drives of turn-tilt fittings are used for both centre and constant han-dle positions. The consistent use of the modular system means that the overall product range is compact, which also guaran-tees minimal warehousing and logistics requirements. By using locking drives with backsets from mm, sashes opening to the outside can be covered. Here too, the turn sash limiter is activated via the special connecting rail. Your partner for service Our services are solution-oriented, reliable and precisely geared to match your requirements just as you would expect from your partner. We are always at your service. With application engineers on site, professional help from our product data ser-vice, and innovative software solutions to help optimise your workflow we safeguard and extend your capacity to act. On top of this, our comprehensive product system and so-phisticated logistics service guarantee fast delivery at all times. Quality standard The Winkhaus group successfully passed a group certification of production sites according to DIN ISO 900:00. The group certification ensures that we use the same criteria and procedures in all Winkhaus subsidiaries und thus we can always offer consistent quality for our customers. Product liability To ensure compliance with German product liability laws (arti-cle ProdHaftG), please observe our manufacturer s informa-tion on turn-tilt fittings for windows and glazed doors. Failure to observe releases the manufacturer from any liability. Please consult your Winkhaus contact person for further on this topic. Please also observe the guidelines issued by Gütegemeinschaft Schlösser und Beschläge e.v. (Association for Quality Control of Locks and Fittings). This can be obtained at the following Internet address: http://www.beschlagindustrie.de/ggsb/richtlinien.asp Proper screw fixing in terms of load of security-relevant fitting components In order to ensure the endurance and operating safety of windows and balcony doors over their expected service life, major importance must be attached to the installation of security-relevant fitting components! Manufacturers of windows and balcony doors are responsible for fixing the fitting elements on the sash and the frame in a professional way and they must make sure that the specifications are adhered to. Important: Please observe these guidelines! Use only screws that are long enough to bear the loads. We recommend you to fix the corner and shear hinge screws in the steel reinforcement of the PVC-U window. Tried and trusted quality Our quality philosophy makes sure only first-quality products leave our works. The prerequisites for this are set in our con-struction department thanks to premium materials and thor-ough workmanship. In addition, a special refinement of surfaces guarantees permanent corrosion resistance and meets highest demands. The electroplating technique corresponds to DIN EN 0 (00), wear class. All these measures make sure that Winkhaus fittings are especially durable and run smoothly for many years.
Winkhaus easypilot Nordic 0-0
Winkhaus easypilot Nordic 0-0 FB-GVT SBA/SBS Cam keep FB.GV.TO Brake connector SBA/SBS Cam keep GAK/GAM Drive rod Hardware Layout Active Sash Jamb Locking Version Sash Rebate Width 0-00mm AS. Terminal element SBA/SBS Cam keep
Winkhaus easypilot Nordic 0-0 SBA/SBS Cam keep E.W.FB-GV Brake connector FB-GVT SBA/SBS Cam keep GAK/GAM Drive rod Hardware Layout Active Sash Head/Sill Locking Version Sash Rebate Width -mm E Corner drive SBA/SBS Cam keep ER-A End cover plate
Winkhaus easypilot Nordic 0-0 SBA/SBS Cam keep FB-GVT E.W.FB-GV Brake connector Hardware Layout Inactive Sash Lever Gear Version Sash Rebate Width -mm GASK/GASM Lever Gear E Corner drive ER-A End cover plate SBA/SBS Cam keep
Winkhaus easypilot Nordic 0-0 Drive rod GAM.... - Central handle position standard, adjustable by trimming - Backset. mm - Clampable in fitting groove - Functional parts such as DFE and TFE retrofittable (see table) - Useable left and right hand - Safety locking pin as an adjustable octagonal bolt - Fasten the window handle attachment with M x..., DIN 9 mm screw centres - Central fastening as standard - Turn position is the factory default - Drive stroke approx. mm with window handle rotation by 0 - Faceplate width mm - Overlapping system linkage without connecting plates Article description Article No. Cam Scope of application Trim top DFE TFE Box Trim bottom Qty. GAM.00 9 0 FFH 0-00 0 GAM.00 9 0 FFH 0-00 0 GAM.00-99 FFH 0-00 0 GAM.00 990 0 FFH 900-00 0 GAM.00-99 FFH 900-00 0 GAM.00-99 FFH 900-00 0 GAM.00 99 0 FFH 00-00 0 GAM.00-99 FFH 00-00 0 GAM.00 9 0 FFH 00-00 GAM.00-9 FFH 00-00 0 GAM.00-.BK 9 FFH 00-00 0 0
Winkhaus easypilot Nordic 0-0 Drive rod GAM... D - 0 - Central handle position standard, adjustable by trimming - The backset is optionally, 0,, 0, or 0 mm - Clampable in fitting groove - Functional parts such as DFE retrofittable (see table) - For drilling and milling instructions see Group installation drawings - Trimable top and bottom - Extendable with extension rods - Useable left and right hand - Safety locking pin as a manually adjustable octagonal bolt - Fasten the window handle attachment with M x..., DIN 9, mm screw centres - Gear case for mounting in drilled hole - Central fastening as standard - Turn position is the factory default - Drive stroke approx. mm with window handle rotation by 0 - Faceplate width mm - Overlapping system linkage without connecting plates Article description Article No. Backset (mm) Cam Scope of application Trim top DFE Box Qty. Trim bottom GAM.00.D 90 0 FFH 0-00 GAM.00.D0 909 0 0 FFH 0-00 GAM.00-.D 90 FFH 0-00 GAM.00-.D0 90 0 FFH 0-00 GAM.00-.D 99 FFH 900-00 GAM.00-.D0 9 0 FFH 900-00 GAM.00-.D 9 FFH 900-00 GAM.00-.D0 9 0 FFH 900-00 GAM.00-.D 9 FFH 900-00 GAM.00-.D0 9 0 FFH 900-00 GAM.00-.D 9 FFH 900-00 GAM.00-.D0 9 0 FFH 900-00 GAM.00-.D 9 FFH 900-00 GAM.00-.D0 9 0 FFH 900-00 GAM.00-.D 9 FFH 900-00 GAM.00-.D0 9 0 FFH 900-00 GAM.00-.D 99 FFH 00-00 0 GAM.00-.D0 90 0 FFH 00-00 0 GAM.00-.D 9 FFH 00-00 0 GAM.00-.D0 9 0 FFH 00-00 0 GAM.00-.D 9 FFH 00-00 0 GAM.00-.D0 9 0 FFH 00-00 0 GAM.00-.D 9 FFH 00-00 0 GAM.00-.D0 9 0 FFH 00-00 0 GAM.00-.D 99 FFH 00-00 0 GAM.00-.D0 90 0 FFH 00-00 0 GAM.00-.D0 90 0 FFH 00-00 0 GAM.00-.D 9 FFH 00-00 0 GAM.00-.D0 9 0 FFH 00-00 0 0 0
Winkhaus easypilot Nordic 9 0-0 Double sash drive rod GASM - Central handle position standard, adjustable by trimming - piece - GASM.00 is always used in combination with corner drive E - Clampable in fitting groove - Concealed lever, easily accessible - -piece locking stroke similar to drive rod GAK or GAM - Safety keeps are generally preassembled - Trimable top and bottom - Extendable with extension rods - Adapters for functional parts DFE and TFE can be fitted to security keeps from GASM.00- onwards - Central fastening as standard - Useable left and right hand - Turn position is the factory default - Faceplate width mm - Overlapping system linkage without connecting plates Article description Article No. Cam keep Scope of application Trim top Trim bottom Box Qty. GASM.00 9 0 FF 0-00 0 GASM.00-.E 9 FF 0-00 0 GASM.00-9 FF 900-00 0 GASM.00-9 FF 900-00 0 GASM.00-900 FF 00-00 0 0 GASM.00-90 FF 00-00 0 0
Winkhaus easypilot Nordic 0 0-0 Brake connector corner drive E.W.FB-GV - Useable left and right hand - For turn windows - For regulating an FB-GVT window limiter - Assembly position: closing side, top - Safety locking pin as an adjustable octagonal bolt - Faceplate width mm - Central fastening as standard - Overlapping system linkage without connecting plates Article description Article No. Box Qty. E.W.FB-GV 00 0
Winkhaus easypilot Nordic 0-0 Brake connector FB.GV.TO - Useable left and right hand - For turn windows - For regulating an FB-GVT window limiter - Assembly position: closing side, top - Safety locking pin as an adjustable octagonal bolt - Faceplate width mm - Central fastening as standard - Overlapping system linkage without connecting plates Article description Article No. Box Qty. FB.GV.TO 99 00
Winkhaus easypilot Nordic 0-0 FB-GVT... - Used in combination with FB.GV.TO or corner drive E.W.FB-GV - Is regulated via the olive-shaped handle - For insertion into existing fitting groove - Maximum diameter of the fastening screws is.0 mm Frame plate RP FB SL - Screw-connect-type frame plate - Preadjusted for insertion of mounting spacers WSK... Article description Article No. Sash Rebate Width with FB.GV.TO Sash Rebate Width with E.W.FB-GV Box Qty. FB-GVT 00/ SL 90 0-00 - 00 FB-GVT 00/ SL 9 0-00 - 00 FB-GVT 00/ SL 9 0-00 9-9 FB-GVT 00/ SL 9 0-00 9- RP FB SL 9999 00
Winkhaus easypilot Nordic 0-0 Terminal element AS. - Useable left and right hand - Length 9.mm - Mushroom head with adjustable contact pressure - mm faceplate - Central fitting standard for series - Overlapping system linkage without faceplates n Article description Article No. AS. 90 Box Qty. 00
Winkhaus easypilot Nordic 0-0 Corner drive E - Useable left and right hand - Bracket length 9. mm - Safety locking pin as a manually adjustable octagonal bolt - Smooth operation, due to rust-free spring steel hinges inserted in C-rail - Central fastening as standard - Turn position is the factory default - Faceplate width mm - Overlapping system linkage without connecting plates E Corner drive E - Same construction as E with an additional octagonal bolt on the second arm E Corner drive E.L - Same construction as E with shortened bracket on one side - Corner piece for diagonal screw connection E.L Article description Article No. Box Qty. E 00 E 90 00 E.L 90 00
Winkhaus activpilot Corner drives 0-0 AL Corner drive E.SBS.U - For installation into the bottom inactive (second-opening) sash with opposing eurogroove when an E corner drive is used for the sash opened first. - With security keep welded to the vertical arm - Useable left and right hand - Bracket length 9. mm - Safety locking pin as an adjustable octagonal bolt - Automatic and manual assembly possible - Smooth operation, due to rust-free spring steel hinges inserted in C-rail - Central fastening as standard - Turn position is the factory default - Faceplate width mm - Overlapping system linkage without connecting plates E.SBS.U Article description Article No. Box Qty. E.SBS.U 999 00
Winkhaus easypilot Nordic 0-0 Interlocking rod M - Useable left and right hand - Safety locking pin as a manually adjustable octagonal bolt - Faceplate width mm - Central fastening loosens automatically by tightening fitting screw - Functional both vertically and horizontally - Overlapping system linkage without connecting plates Interlocking rod MK - Extendable interlocking rod, can be combined with Winkhaus standard gearing - Otherwise this design is identical to interlocking rod M. interlocking rod MK interlocking rod M Article description Article No. Cam Length Box Qty. M.0-0 0 M.00-999 00 0 M.0-90 0 0 MK.0-0 99 0 0 0 MK.0-99 0 0 MK.00-0 99 0 00 0 MK.00-9 00 0
Winkhaus activpilot 0-0 AL MS.SU. MS.SO. Interlocking rod MS.SU - For fitting vertically below the double-sash drive rod - Safety keeps are generally pre-assembled - Clampable in fitting groove - Designed for mm airgap - Useable left and right hand - Central fastening loosens automatically by tightening fitting screw - Faceplate width mm - Overlapping system linkage without connecting plates Interlocking rod MS.SO - For fitting vertically above the double-sash drive rod - Otherwise this type is identical to interlocking rod MS.SU Article description Article No. Length Box Qty. MS.SO.0-90 0mm 0 MS.SO.00-9 00mm 0 MS.SU.0-90 0mm 0 MS.SU.00-00mm 0
Winkhaus easypilot Nordic 0-0 Interlocking rod VK.AK - Useable left and right hand - Length 0mm, trimable to 00mm - Safety locking pin as a manually adjustable octagonal bolt - Faceplate width mm - Central fastening loosens automatically by tightening fitting screw - Functional both vertically and horizontally - Overlapping system linkage without connecting plates Article description Article No. Cam Length Box Qty. VK.AK.0-009 0 0
Winkhaus easypilot Nordic 9 0-0 End cover plate ER-A - Serves as an end profile on or extensible interlocking rods to cover the connecting rod Connecting plate R - For connecting a corner drive with a component that needs shortening, e.g. a gear rod or top rod - The element to be shortened can be cut straight Article description Article No. Box Qty. R SL 90 00 ER-A SL 909 00
Winkhaus easypilot Nordic 0 0-0 Standard Keep SBA.H - Standard keep made of zinc diecast - Useable left and right hand - Diagonal screw connection Article description Article No. Groove position Frame rebate Box Qty. SBA.H.9-9 9 00 SBA.H.9-0 99 00 SBA.H.-0 990 0 00
Winkhaus easypilot Nordic 0-0 Security keep SBS.H. - Steel web with PVC bottom part - With two straight screw connections and one diagonal screw connection Article description Article No. Groove position Frame rebate Box Qty. SBS.H.9-.LS 90 9 00 SBS.H.9-.RS 9 9 00 SBS.H.9-0.LS 9 00 SBS.H.9-0.RS 90 00 SBS.H.-0 99 0 00 RS = right, LS = left DIN 0 standard concerning door-hand Adoorisdefinedas right-handed or left-handed when,fromtheopeningside, thehingesarelocatedonthe right or left,respectively. DINleft-hand right-handstriker left-handstriker DINright-hand left-hand striker right-hand striker DINright-hand DINleft-hand
Winkhaus easypilot Nordic 0-0 Frame plate RP FB SL Wooden window For square window frame profile 0 90 R 0 F F (mm) R (mm) FB-GVT 00/ 0 0 FB-GVT 00/ 90 0 FB-GVT 00/ 0 0 FB-GVT 00/ 9 Installation drawing wooden window F = sash profile R = frame profile Installation dimensions depending on the profile
Winkhaus easypilot Nordic 0-0 Frame plate RP FB SL PVC-U window Profile adjustment via mounting spacer FT - WSK... 90 R 0 F F (mm) R (mm) FB-GVT 00/ 0 0 FB-GVT 00/ 90 FB-GVT 00/ 0 FB-GVT 00/ Installation drawing PVC-U window F = airgap R = frame profile Profile adjustment via mounting spacer FT - WSK... Installation dimensions are profile dependent and refer to the Winkhaus hinge situation.
Winkhaus easypilot Nordic 0-0 Installation drawings Drive rod GAK / GAM 0 00 GM / GK D 0 B--: Drilling and milling instructions GAK/GAM... D =. mm B--: Drilling and milling instructions GAK/GAM... D... 0 D = Backset