WoodyWood Inc. Hand and Power Tools Pre-use Inspection Checklist. conducted for. Location Ambada Rd, Ambada, Madhya Pradesh , India

Similar documents
SkillsUSA California COMPETITION CHAIRMEN: SCOPE OF THE COMPETITION: Please refer to the SkillsUSA Championships Technical Standards.

SkillsUSA California Carpentry 2019 Regional Competition SCOPE OF THE COMPETITION:

JUDGING CRITERIA: Please refer to SkillsUSA Championships Technical Standards.

Tools Hand and Power. OSHA Office of Training and Education 1

"HAND AND POWER TOOL SAFETY"

3456 Hand & Power Tool Safety

"HAND AND POWER TOOL SAFETY IN CONSTRUCTION ENVIRONMENTS"

General Safety. Start with a Safe Work Area. Rules about Extension Cords. Electricity can be Dangerous. Good Personal Safety is a Must

General Safety. Start with a Safe Work Area. Rules about Extension Cords. Electricity can be Dangerous. Good Personal Safety is a Must

ENGLISH (Original instructions) INSTRUCTION MANUAL. Drill DS4012 DOUBLE INSULATION. IMPORTANT: Read Before Using.

Hand & Power Tool Safety

Health & Safety Policy and Procedures Manual SECTION 5 HAND AND POWER TOOLS

HAND AND POWER TOOLS

Reducing Injuries: Using Power Tools at Work and at Home!

ENGLISH (Original instructions) INSTRUCTION MANUAL. Drill DOUBLE INSULATION. IMPORTANT: Read Before Using.

Firefighter Firefighter Chapter 2: Firefighter Safety & Health 2.10 Safety with Tools and Equipment and Safety In Training - Part 1

ENGLISH (Original instructions) INSTRUCTION MANUAL. Drill MT600 MT601 DOUBLE INSULATION. IMPORTANT: Read Before Using.

SAFETY AND OPERATING MANUAL. Hedge Trimmer WG205E WG206E WG207E WG208E

Band Saw Operation & Safety

Electric Chainsaw Sharpener

BENCH GRINDER OWNER S MANUAL

ENGLISH (Original instructions) INSTRUCTION MANUAL. Hammer Drill HP1630 HP1631 DOUBLE INSULATION. IMPORTANT: Read Before Using.

Inverurie & District Men s Shed Welcome Pack

SAFETY DIRECTIVE 2.0 DEPARTMENTS AFFECTED. This Administrative Directive shall apply to all Town of Marana departments and employees.

SAFETY AND OPERATING MANUAL

ROTARY HAMMER OWNER'S MANUAL

CHAPTER HAND TOOLS HAND TOOLS SAFETY Lesson - 4 pages. Hand Tools

Drill INSTRUCTION MANUAL. WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE 1 REFERENCE.

2-Speed Hammer Drill HP2030 HP2031 INSTRUCTION MANUAL

Hand and Power Tool Safety

Module Overview. Hand and Power Tool Safety Module covers:

ENGLISH (Original instructions) INSTRUCTION MANUAL. Shear Wrench 6922NB DOUBLE INSULATION. IMPORTANT: Read Before Using.

Impact Wrench MODEL TW1000. WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

ENGLISH (Original instructions) INSTRUCTION MANUAL. Curved Planer 1002BA DOUBLE INSULATION. IMPORTANT: Read Before Using.

Hand and Portable Power Tools Program

ATBG280/6 Bench Grinder Bench Grinder ATBG280/6 230V-50Hz 280 Watt 150mm x 25mm Wheel size

North Dakota State University Power Tool Operations and Maintenance

CHAPTER 52 ELECTRICAL POWER TOOLS

MAKER LAB Safety Instructions Power Tool Training

Drill MODEL 6013B MODEL 6013BR. WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Chapter 8 Workshops and Maintenance

Impact Wrench MODEL 6905B MODEL 6906

HP2050 HP2050F HP2051 HP2051F

ATD AMP Variable Speed Reciprocating Saw Owner s Manual

Circular Saw MODEL MT581. WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Impact Wrench. 19 mm (3/4 ) MODEL 6906

BB Inch Double Cut Saw Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.

ENGLISH (Original instructions) INSTRUCTION MANUAL. Drill 6402 DP4700 DP4700 DOUBLE INSULATION. IMPORTANT: Read Before Using.

LOS ANGELES UNIFIED SCHOOL DISTRICT DIVISION OF ADULT AND CAREER EDUCATION SAFETY TEST FOR AUTO MECHANICS PROGRAM

PS /8 Inch Electric Drill Assembly & Operating Instructions

20V CORDLESS RECIPROCATING SAW MODEL NO: CRS20Li

ENGLISH (Original instructions) INSTRUCTION MANUAL. Hammer Drill MHP161 DOUBLE INSULATION. IMPORTANT: Read Before Using.

SAFETY AND OPERATING MANUAL

Multi-function bar clamp

College of Forestry 610: Power Tools

18 PIECE HOLE SAW SET

This review. prepares the student for nationally industry recognized assessments. A general overview of power tools is provided.

NATIONAL CERTIFICATE (VOCATIONAL) NQF LEVEL 2 SUPPLEMENTARY EXAMINATION

ENGLISH (Original instructions) INSTRUCTION MANUAL. Drill MDP303 MDP304 DOUBLE INSULATION. IMPORTANT: Read Before Using.

Each employer shall be responsible for the safe condition of tools and equipment used by employees, including tools and equipment which may be

Los Angeles Unified School District Division of Adult and Career Education LOS ANGELES UNIFIED SCHOOL DISTRICT DIVISION OF ADULT AND CAREER EDUCATION

Angle Drill MODEL DA3000R MODEL DA3000V

Angle Drill DA4000LR INSTRUCTION MANUAL

PRODUCT MANUAL 5-IN-1 MITER SAW STATION *SAVE THIS MANUAL FOR FUTURE REFERENCE

6 BENCH GRINDER. Model ASSEMBLY AND OPERATING INSTRUCTIONS

MULTI-PURPOSE SAW MODEL NO. OZMPS500A OPERATING INSTRUCTIONS

COJSAWBX Electric Jig Saw Assembly & Operating Instructions

Maker Hub Access Agreement

Introduction To Automotive Technology

High Speed Drill MODEL WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

INSTRUCTION BOOKLET AND WARRANTY INFORMATION 6 BENCH GRINDER

LOS ANGELES UNIFIED SCHOOL DISTRICT DIVISION OF ADULT AND CAREER EDUCATION SAFETY TEST FOR INDUSTRIAL EDUCATION CONSTRUCTION

ENGLISH (Original instructions) INSTRUCTION MANUAL. 2-speed drill DP4010 DP4011 DOUBLE INSULATION. IMPORTANT: Read Before Using.

Tools and Techniques

ENGLISH (Original instructions) INSTRUCTION MANUAL. Recipro Saw JR3050T DOUBLE INSULATION. IMPORTANT: Read Before Using.

University of Tennessee Safety Guidelines

REEL BLADE / BED KNIFE ADJUSTING & SHARPENING

INSTRUCTIONS & PARTS LIST FOR 270A, 270A-2, & 270A-4 SIOUX RIVET HAMMERS (SERIAL D)

OPERATOR S MANUAL FOR MODEL BLADE GRINDER

Press Snap Soil Pipe Cutter

Dust Collector. Model No: DC2200 (FM300S)

SAFETY AND OPERATING MANUAL

Drill MODEL DP3002/DP3003 MODEL DP4000/DP4001 MODEL DP4002/DP4003

2-Speed Hammer Drill HP2000 HP2020

1/4 Sheet Palm Sander

L A M I N AT E F L O O R C U T T E R OWNER S MANUAL

Date 1/29/16 Revised. I. Wood Lathe Safety Policy PURPOSE

Concrete Planer PC5000C PC5001C INSTRUCTION MANUAL

Angle Grinder MODEL 9553B MODEL 9555B

MULTI FUNCTION SHARPENER

Rotary Hammer HR2470 HR2470F HR2470FT HR2470T INSTRUCTION MANUAL

Impact Wrench 6904VH 6905H INSTRUCTION MANUAL

Hand and Power Tool Safety Program

My Background. Session Topics. General Industry Standards. Variety of Tools Covered. Related Standards/Hazards 1/27/2014

ENGLISH (Original instructions) INSTRUCTION MANUAL. Metal Cutting Saw LC1230 DOUBLE INSULATION. IMPORTANT: Read Before Using.

Hammer Drill MODEL HP1500 MODEL HP1501 MODEL HP1510

This unit covers the tools and equipment, that are used on a regular basis within a florist shop/ floral studio.

SHOP SAFETY AND TRAINING IN ACADEMIC DEPARTMENTS

SHRINKER/STRETCHER SET Create radius bends and contours in sheet metal

Tube Facing Tool.

Transcription:

Hand and Power Tools Pre-use Inspection Checklist conducted for WoodyWood Inc. Location Ambada Rd, Ambada, Madhya Pradesh 480334, India Conducted on 18 May 2018 06:34 AM Prepared by Andy Singh Completed on 18 May 2018 07:57 AM Score 27/32.0-84.38%

Failed Responses This section lists responses that were set as "failed responses" in the template used for this audit Question Response Details Employees are wearing proper PPE (safety goggles, face masks, gloves and respiratory protection) workers are not wearing carving gloves. Appendix 1 Appendix 2 Tools have no visible cracks in jaws or handle Broken tools found Appendix 3 Appendix 4 Tools such as chisels and punches do not have mushroomed heads Mushroom head chisel Appendix 5 Tool power-source shows no damage (cord, airline, battery, etc.) Cord has a slight damage Appendix 6 WoodyWood Inc. / Andy Singh / 18 May 2018-2 -

Question Response Details All shields, guards or attachments required by manufacturer are present machine guard installed Appendix 7 WoodyWood Inc. / Andy Singh / 18 May 2018-3 -

Actions #1. Please wear safety gloves. Assignee: flint@gmail.com Priority: HIGH Due Date: 18 May 2018 06:47 AM Audit: WoodyWood Inc. / Andy Singh / 18 May 2018 Linked to item: Employees are wearing proper PPE (safety goggles, face masks, gloves and respiratory protection) Status: To Do #2. Remove these tools out of service Assignee: Flint@gmail.com Priority: MEDIUM Due Date: 18 May 2018 06:55 AM Audit: WoodyWood Inc. / Andy Singh / 18 May 2018 Linked to item: Tools have no visible cracks in jaws or handle Status: To Do #3. Repair this please Assignee: flint@gmail.com Priority: MEDIUM Due Date: 18 May 2018 06:57 AM Audit: WoodyWood Inc. / Andy Singh / 18 May 2018 Linked to item: Tools such as chisels and punches do not have mushroomed heads Status: To Do #4. Fix this, please Assignee: flint@gmail.com Priority: HIGH Due Date: 18 May 2018 06:59 AM Audit: WoodyWood Inc. / Andy Singh / 18 May 2018 Linked to item: Tool power-source shows no damage (cord, airline, battery, etc.) Status: To Do WoodyWood Inc. / Andy Singh / 18 May 2018-4 -

#5. Please attach a machine guard Assignee: flint@gmail.com Priority: HIGH Due Date: 18 May 2018 07:04 AM Audit: WoodyWood Inc. / Andy Singh / 18 May 2018 Linked to item: All shields, guards or attachments required by manufacturer are present Status: To Do WoodyWood Inc. / Andy Singh / 18 May 2018-5 -

Audit - 27/32 84.38% Question Response Details Description of work Hand tools used Power tools used Cutting and carving wood to make wood furnitures Chisel Wrench Axe Screwdrivers Smoothing plane Circular saw Power drill Nailgun General inspection Score (6/6) 100.00% The area is clean and free from hazards Manufacturer s instruction for cleaning and maintenance is referenced during cleaning or maintenance Spark proof materials are used if you are working with flammable items A portable light is used and installed if the work area is dimmed Employees and other people nearby are on a safe distance to avoid flying debris LOTO devices are installed to broken tools Tools were repaired or replaced when needed. N/A Employees Score (2/3) 66.67% Employees are in good condition and not under into any influence of drugs or alcohol WoodyWood Inc. / Andy Singh / 18 May 2018 Score (27/32) 84.38% - 6 -

Question Response Details Employees are wearing proper PPE (safety goggles, face masks, gloves and respiratory protection) workers are not wearing carving gloves. Appendix 1 Appendix 2 Employees are competent and trained before performing the job. Hand tools Score (10/12) 83.33% The outside of the tool is free of grease, oil and accumulated foreign matter Handles are not cracked, damaged or loose from heads of hammers, axes mauls and other similar tools Tools have no visible cracks in jaws or handle Broken tools found Appendix 3 Appendix 4 WoodyWood Inc. / Andy Singh / 18 May 2018 Score (27/32) 84.38% - 7 -

Question Response Details REFERENCE: Hand tools in good condition [This is an example of how you can use iauditor to include best practice reference images in your templates to assist with inspections] Blades or bits are not damaged, cracked, etc. Blades are withdrawn when not in use. Blades are sharpened or replace as often as possible Tips of screwdrivers, chisels or other similar tools show no excessive wear Gripping surfaces pliers, wrenches or other similar tools are not worn The head of chisels are ground down Tools such as chisels and punches do not have mushroomed heads Worn out chisel Mushroom head chisel Appendix 5 WoodyWood Inc. / Andy Singh / 18 May 2018 Score (27/32) 84.38% - 8 -

Question Response Details Cutting tools such as chisels and axes are sharp Snap-on or corks and styrofoam is used when storing sharp hand tools Power Tools Score (9/11) 81.82% The outside of the tool is free of grease, oil and accumulated foreign matter Tool power-source shows no damage (cord, airline, battery, etc.) Cord has a slight damage Appendix 6 The tool is double insulated and tool housing is not damaged Electrical cord third prong (ground) is intact All shields, guards or attachments required by manufacturer are present machine guard installed Appendix 7 Rotating or moving parts of the tool are guarded to prevent physical contact The tool is not leaking fluid such as gasoline, oil etc. Blades or bits are not damaged, cracked, excessively worn, etc. Ground Fault Circuit Interrupter (GFCI) is availble to prevent shocks WoodyWood Inc. / Andy Singh / 18 May 2018 Score (27/32) 84.38% - 9 -

Question Response Details Tools are dry Electrical cords are not frayed Summary How many tools need to be repaired? 2 Take photos of the tools for repair (optional) Appendix 8 Appendix 9 How many tools need to be replaced? 2 Take photos of the tools for replacement (optional) Appendix 10 Appendix 11 Enter recommendations here 1. Keep your tools in good condition 2. Use the correct tools for the job 3. Know how to properly operate tools 4. Wear proper protective equipment 5. Do not utilize tools when distracted or not in focus 6. Do not use tools when you are under the influence of alcohol or illegal drugs. Completion Full Name and Signature of Inspector Andy Singh 18 May 2018 07:16 AM WoodyWood Inc. / Andy Singh / 18 May 2018 Score (27/32) 84.38% - 10 -

Media Appendix 1 Appendix 2 Appendix 3 Appendix 4 WoodyWood Inc. / Andy Singh / 18 May 2018-11 -

Appendix 5 Appendix 6 Appendix 7 Appendix 8 WoodyWood Inc. / Andy Singh / 18 May 2018-12 -

Appendix 9 Appendix 10 Appendix 11 WoodyWood Inc. / Andy Singh / 18 May 2018-13 -