PAGE INDEX. Drill Press 10. Mortisers Dust Collector Sanders

PAGE INDEX Table Saws 2-3 CNC 4-5 Wood lathes 6-7 Bandsaws 8-9 Drill Press 10 Mortisers Dust Collector Sanders 11 12-14 15-16 Jointers 17-18 Planers 19 Shapers 20-21

NEW PM3000 14 TABLESAWS Quick release riving knife lever for hassle free riving knife changes Matching beveled edge between table and extension wings Newly designed AccuFence system for precision cuts Dust collection greatly improved from previous models Poly-V drive belt system delivers efficient, quiet operation Wide stance heavy-duty trunnion for stability and smooth blade positioning CSA certified $6,849.99 Stock No. PM375350K PM375350K PM3000, 14 Table Saw, 7.5 HP, 3PH 230/460v, 50 Accu-Fence $6,849.99 1791081B Dado Insert for PM3000B $89.04 Please visit www.fordmachinery.com NEW PM2000B 10 TABLESAWS Integrated Digital Read Out for precise bevel cuts Newly designed integrated hydraulic castor system with greater travel than previous model Matching bevel edge between table and extension wings Newly designed Arbor lock for quick and easy blade changes $4,657.99 Stock No. PM23130K PM23130K PM2000B, 10 Table Saw, 3 HP, 1PH 230v, 30 Accu-Fence $4,657.99 PM23150K PM2000B, 10 Table Saw, 3 HP, 1PH 230v, 50 Accu-Fence $4,794.99 PM23150RK PM2000B, 10 Table Saw, 3 HP, 1PH 230v, 50 Accu-Fence, Router Lift $5,890.99 PM23150WK PM2000B, 10 Table Saw, 3 HP, 1PH 230v, 50 Accu-Fence, Workbench $5,411.99 PM25130K PM2000B, 10 Table Saw, 5 HP, 1PH 230v, 30 Accu-Fence $5,548.99 PM25150K PM2000B, 10 Table Saw, 5 HP, 1PH 230v, 50 Accu-Fence $5,685.49 PM25150RK PM2000B, 10 Table Saw, 5 HP, 1PH 230v, 50 Accu-Fence, Router Lift $6,712.99 PM25150WK PM2000B, 10 Table Saw, 5 HP, 1PH 230v, 50 Accu-Fence, Work bench $6,096.49 PM25330K PM2000B, 10 Table Saw, 5 HP, 3PH 230/460v, 30 Accu-Fence $5,411.99 PM25350K PM2000B, 10 Table Saw, 5 HP, 3PH 230/460v, 50 Accu-Fence $5,548.49 PM25350RK PM2000B, 10 Table Saw, 5 HP, 3PH 230/460v, 50 Accu-Fence, Router Lift $6,575.99 PM25350WK PM2000B, 10 Table Saw, 5 HP, 3PH 230/460v, 50 Accu-Fence, Work bench $5,959.49 Please visit www.fordmachinery.com 2

PM1000 TABLESAW A blade surround and collection hose provide an unobstructed path, maximizing dust collection Conveniently located hands-free power switch Tool-less guard assembly with independent sides in easy-to-use, maximizing safety The sturdy miter gauge pivots 60 degrees to either side, allowing easy adjustment for a full range of cuts Cast iron work surface features a beveled edge Exclusive Accu-Fence provides rigidity and precision The poly V-belt drive system reduces vibration and maximizes efficiency Chrome plated, ergonomic handwheels make adjustments smooth and easy $3,150.99 Stock No. 1791001K 1791000K PM1000 Table Saw, 1-3/4 HP, 1PH 115v, 30 Accu-Fence System w/riving Knife $3,013.99 1791001K PM1000 Table Saw, 1-3/4 HP, 1PH 115v, 52 Accu-Fence System w/riving Knife $3,150.99 1791793 PM1000-TKLPRK,.79 Thin Kerf, Low Profile Riving Knife $27.39 1791786B Insert Zero-Clearance PM2000B $89.04 1791788B Insert Dado for PM2000B $89.04 1791791B Riving Knife Thin Kerf 0.079 for PM2000B $54.79 1791792B Riving Knife Thin Kerf, Low Profile for PM2000B $68.49 64B TABLESAW Riving knife maintains close proximity to reduce chance of kickback Blade guard and riving knife have quick release for tool-less mounting and removal Exclusive Powermatic Accu-Fence maximizes accuracy and safety Micro-adjust mitre gauge with extension plate offers wider crosscut support Hinged motor cover provides easy access to the cabinet interior when needed $2,328.99 Stock No. 1791229K 1791229K 64B 10 Table Saw, 1.5 HP, 1PH 115/230v, 30 Accu-Fence System w/riving Knife $2,328.99 1791230K 64B 10 Table Saw, 1.5 HP, 1PH 115/230v, 50 Accu-Fence System w/riving Knife $2,465.99 1791088 Dado Insert, 64B $68.49 6827036 Wood Extension Table 27 x 17, for 64A, 64B $191.79 3

PM-2X4SPK CNC KIT WITH ELECTRO SPINDLE Heavy-duty welded steel frame provides rigidity and maintains accuracy Enclosed cabinet is heavy welded steel and includes a handy tool box and casters for mobility The extruded aluminum table delivers a large, sturdy surface while the integrated T-slots allow the hold-down clamps to be positioned in any location. An MDF spoil board protects the table from damage and can be quickly resurfaced using the preloaded program Exclusive, heavy-duty gantry supports are made of gravity cast aluminum Precision ball screws with recirculating ball bearings allow for rapid movement on each axis while maintaining precise spindle placement The Electro spindle is liquid cooled by a system that pushes coolant through the spindle while a radiator and fan assembly dissipate the heat Linear guideways with recirculating ball bearings ensure precise and accurate positioning of the tool bit The handheld controller attaches to the DSP control box via a 8 foot cable that makes it easy to oversee any project from a variety of positions Flexible nylon track chains protect all cables preventing rubbing and stress High-torque steppers motor control each axis, providing fast, quiet and precise movement $11,987.49 Stock No. 1797024K 1797024K PM-2X4SPK CNC Kit With Electro Spindle $11,987.49 1797000 PM-HD CNC Hold Downs (Set of 2) $27.39 1797001 PM-DS Dust Shoe $82.19 1797003 PM-RBS CNC ROUTER BIT SET $410.99 SOFTWARE NOT INCLUDED 4

PM-2X2RK CNC KIT WITH ROUTER MOUNT Heavy-duty welded steel frame provides rigidity and maintains accuracy Enclosed cabinet is heavy welded steel and includes a handy tool box and casters for mobility The extruded aluminum table delivers a large, sturdy surface while the integrated T-slots allow the hold-down clamps to be positioned in any location. An MDF spoil board protects the table from damage and can be quickly resurfaced using the preloaded program Exclusive, heavy-duty gantry supports are made of gravity cast aluminum Precision ball screws with recirculating ball bearings allow for rapid movement on each axis while maintaining precise spindle placement Linear guideways with recirculating ball bearings ensure precise and accurate positioning of the tool bit The handheld controller attaches to the DSP control box via a 8 foot cable that makes it easy to oversee any project from a variety of positions Flexible nylon track chains protect all cables preventing rubbing and stress High-torque stepper motors control each axis, providing fast, quiet precise movement The included puck allows you to quickly and easily re-zero your Z-axis with the push of a button on your controller Enclosed steel stand features drawers for storage, casters for mobility and independent levelling feet. Hold down clamps have a 5/16 T-bolt with a 1-1/8 wide by 5-1/4 aluminum arm 4 hold down clamps included with CNC kit Included dust shoe provides a clean surface as the machine works when hooked up to a dust collector. Universal 3-1/2 router mount (router not included) $8,151.49 Stock No. 1797022K *Router not included 1797022K PM-2X2RK CNC KIT With Router Mount $8,151.49 1797000 PM-HD CNC Hold Downs (Set of 2) $27.39 1797001 PM-DS CNC Dust Shoe $82.19 1797003 PM-RBS CNC Router Bit Set $410.99 SOFTWARE NOT INCLUDED 5

4224B WOOD LATHE Sliding headstock with electronic variable speed and digital RPM readout for accurate speed adjustments Spindle lock and built in spindle indexing on the headstock for drilling hole patterns, routing flutes, and other equally spaced features Vacuum system provides quick method of chucking bowl blanks Air nozzle with quick connect for clearing dust and chips Set of dead centers which hold a spindle for visual comparison Quad system provides 115 volt electrical supply Magnetic-backed remote on/off switch can be moved anywhere on the machine Powerful 3HP motor $10,822.99 Stock No. 1794224K 1794224K 4224B Lathe, 3HP 3PH 230V, with Lamp Kit $10,822.99 6294732 Heavy-Duty Outboard Turning Stand for models 3520B, and 4224B $657.99 6294739 6 Toolrest for models 3520A, 3520B, 3520C, 4224 $123.29 6294740 Bowl Turning Toolrest (Right) for models 3520A, 3520B, 3520C, 4224 $178.09 6294751 Bowl Turning Toolrest (Left) for models 3520A, 3520B, 3520C, 4224 $178.09 6294903 Tailstock Riser Block for 4224B $1,000.09 6294904 63 Bed Extension with Stand for 4224B $3,424.99 6294905 20 Bed Extension for 4224B $958.99 PM2020 SHORT BED LATHE Sliding headstock with electronic variable speed and digital RPM readout for accurate speed adjustments Spindle lock and built in spindle indexing on the headstock for drilling hole patterns, routing flutes, and other equally spaced features Set of dead centers which hold a spindle for visual comparison Redesigned tool rest geometry allows for better chisel movement along the tool rest Laser etched quill is self-ejecting Brass tipped knockout bar concentrates the action in the sliding handle; the brass tip will not damage drive centers Attached tool caddy allows convenient access to centers, wrenches, etc. Tailstock has internal storage for additional accessories Chrome trimmed handwheels are ergonomic for a comfortable feel $5,068.99 Stock No. 1792020 1792020 PM2020 Short Bed Lathe, 2HP 1/3 ph, 220v $5,068.99 6294721 Tailstock Swing Away for 3520, 3520A, 3520B, PM2020 $410.99 6

NEW 3520C WOOD LATHE Moveable control box for customizable versatility Main power disconnect switch located on rear of headstock Self-locating ergonomic spindle lock design for easy, one handed operation Upgraded banjo features a non-marring, pinch style clamp for solid tool rest placement Extended spindle nose increased access to the work piece Adjustable Riser Blocks for 6 of height adjustment, allowing maximum comfort when turning Tailstock incorporates Anti-rotation key and Acme threads for smoother operation and increased longevity Digital speed and Indexing Readout simplifies the indexing process for added precision Fully enclosed VFD for increased user protection Able to maintain speeds as low as 15 RPM Increased weight to 726 LBS (814lbs with bed extension) for the most stable turning experience possible Increased working capacity to a full 35 between centers Optional safety shield $6,164.99 Stock No. 1353001 1353001 3520C Lathe, 2HP 220V $6,164.99 1353002 Powermatic 3520C Bed Extension 20in $657.59 6294732 Heavy-Duty Outboard Turning Stand for models 3520B, 4224 $657.99 6294733 On/Off Remote Switch for models 3520A, 3520B, 4224 $136.99 6294739 6 Toolrest for models 3520A, 3520B, 3520C, 4224 $123.29 6294740 Bowl Turning Toolrest (Right) for models 3520A, 3520B, 3520C, 4224 $178.09 6294751 Bowl Turning Toolrest (Left) for models 3520A, 3520B, 3520C, 4224 $178.09 OPTIONAL LAMP KIT Add 2 task lamps and power outlets with this accessory $657.59 Stock No. 6294901K 6294901K Lamp Kit 4224B, 3520B $657.59 7

18, 20, & 24 BANDSAWS Exclusive Powermatic T-Square style Accu-Fence maximizes accuracy and safety The Accu-Fence has complete adjustability for aligning to blade and squaring to table Sturdy cast iron table and trunnion assembly offers maximum rigidity for large work pieces Oversized side plate can be used in horizontal or vertical position Blade tension release with electrical interlock prevents the bandsaw from starting when the blade is de-tensioned (patent pending) High end blade guides with tool-less adjustment provide stability, increasing cut accuracy Four sided blade guard for optimum protection Integrated foot brake stops a coasting blade and de-energizes magnetic contactor Magnetic switch protects the motor from harm due to potential electrical supply issues $7,123.99 Stock No. 1791800B 1791800B PM1800B, 18 Bandsaw, 5 HP, 1PH 230v $7,123.99 1791801B PM1800B-3, 18 Bandsaw, 5 HP, 3PH 230/460v $7,123.99 1791257B PM1800B, 20 Bandsaw, 5 HP, 1PH 230v $7,808.99 1791258B PM1800B-3, 20 Bandsaw, 5 HP, 3PH 230/460v $7,808.99 1791259B PM1800B, 24 Bandsaw, 5 HP, 1PH 230v $8,630.99 1791260B PM1800B-3, 24 Bandsaw, 5 HP, 3PH 230/460v $8,630.99 Please visit www.fordmachinery.com 8

PM1500 BANDSAW 14-1/2" of throat and 14 of resaw provide more capacity than a traditional 14 bandsaw Sturdy cast iron table and trunnion assembly offers maximum rigidity for heavy work pieces Exclusive Powermatic T-Square style Accu-Fence maximizes accuracy and safety The Accu-Fence has complete adjustability for aligning to blade and squaring to table Positive locking cam with pressure adjustment Oversized side plate can be used in horizontal or vertical position Solid steel resaw pin for optimum rigidity Blade tension release with electrical interlock prevents the bandsaw from starting when the blade is de-tensioned or released Heavy duty upper wheel support and tracking mechanism for smooth operation Solid cast iron upper and lower wheels create the momentum needed for heavy resaw High end blade guides with tool-less adjustment provide stability, increasing cut accuracy Four sided blade guard for optimum protection Integrated foot brake stops a coasting blade and de-energizes magnetic contactor Magnetic switch protects the motor from harm due to potential electric supply issues Heavy duty 3 horsepower motor provides power needed for all projects. $4,109.99 Stock No. 1791500 1791500 PM1500, 15 Bandsaw, 3 HP, 1PH 230v $4,109.99 Please visit www.fordmachinery.com PWBS 14 BANDSAW Blade tension lever has full tension, partial tension and release settings for easy blade changes and tracking Chip blower ensures a clean, visible cut line Durable micro-adjustable dual bearing blade guide system above and below the table for close blade control with less friction Exclusive design, quick-release precision T-square style rip fence with 4 resaw attachment Precision balanced, nine spoke cast iron wheels reduce vibration Full 6 Resaw capacity (12 with riser block) with 13-1/2 width capacity 1791216K PWBS-14CS, Bandsaw, 1.5 HP, 1PH 115/230v $1,780.99 2042377 Mobile base $287.69 Please visit www.fordmachinery.com $1,780.99 Stock No. 1791216K 9

PM2800B 18 VARIABLE SPEED DRILL PRESS Mechanical variable speed allows for full range of speed with no belt changes 6 of quill travel with one revolution of the handle Fence system adjustable for a perfect 90 relationship to the table, for rapid alignment of stock Adjustable material stop makes repetitive action accurate and quick A digital RPM readout, with a range of 250 to 3000, allows the user to optimize the spindle speed to the application Laser guides provide an accurate indication for tool point entry Keyless chuck makes bit changes easier Reversible handles can be mounted on either side of the machine for more comfortable working of the quill Redesigned high output LED lightening eliminates shadows Work table can be rotated to a full 90 position Replaceable square table insert with levelling screws make it flush with the top of the table Oversize cast iron base for added stability Safety key prevents accidental starting $2,159.99 Stock No. 1792800B 1792800B PM2800B, 18 Drill Press, 1HP 1 PH 115/230V $2,159.99 Please visit www.fordmachinery.com 10

PM701 BENCHTOP DELUXE MORTISER In-line depth stop allows stopping at pre-set depths without racking the bit to the base Heavy-duty reversible handle can be installed to either side of the head without tools Stock hold-down with a double lock system, top and side, to eliminate slippage of workpiece Quick action cam lock will quickly lock fence in position with one 90 movement Two integrated bit and chisel spacers for quick set up $821.99 Stock No. 1791310 1791310 PM701 Mortiser, 3/4 HP, 1PH 115/230v $821.99 1791312 701-RB Riser Block Kit $54.79 1791091 Premium Mortise Chisel and Bit, 1/4 $68.49 1791092 Premium Mortise Chisel and Bit, 5/16 $68.49 1791093 Premium Mortise Chisel and Bit, 3/8 $75.34 1791094 Premium Mortise Chisel and Bit, 1/2 $82.19 1791095 Premium Mortise Chisel and Bit, 3/4 $123.29 1791096 Mortise and Chisel Bit Set $246.59 (1/4, 5/16, 3/8,and 1/2 ) 719T TILT TABLE MORTISER WITH STAND $1,849.49 Sturdy cast iron construction with precision-machined column and table Stock No. 1791264K Quick position table mounted swivelling vise clamp accommodates angled workpiece Feed lever features size positions allowing for quick adjustments Table and fence tilt from 0 to 35 for angled mortises Gas cylinder controlled rack and pinion system for smooth head raising and lowering 1791264K 719T Mortiser, 1 HP, 1PH 115/230v $1,849.49 1791091 Premium Mortise Chisel and Bit, 1/4 $68.49 1791092 Premium Mortise Chisel and Bit, 5/16 $68.49 1791093 Premium Mortise Chisel and Bit, 3/8 $75.34 1791094 Premium Mortise Chisel and Bit, 1/2 $82.19 1791095 Premium Mortise Chisel and Bit, 3/4 $123.29 1791096 Mortise and Chisel Bit Set $246.59 (1/4, 5/16, 3/8,and 1/2 ) 11

NEW BREATHE WITH CONFIDENCE $958.99 Stock No. 1791331 CLEAN AIR DELIVERY Removes microscopic wood particulate from shop air with a Clean Air Delivery Rate (CADR) of 680 sq. ft 5X per hour. PM1250 MICRO DUST AFS Patented filter technology works like a magnet attracting and capturing the most dangerous dust particles from the air down to 0.1 micron Cycles air 5X per hour and proven to reduce airborne particles in a 680sqft area (Oversized 2 car garage/shop) Certified to CARB (California Air Resource Board) and Ozone emission standards Quieter than normal conversation at 50.8 db on High and 41.3 db on low speed setting Engineered fan blades increase airflow while reducing noise Energy star rated Multiple Mounting positions for maximum versatility in the shop Handle on top to assist with carrying Electrostatic filter has a 3,000-hour life and easy clean accessibility Intuitive controls featuring multiple speed settings Four timer settings that run up to 8 hours RF remote for quick and easy control anywhere in the shop 1791331 Powermatic PM1250 Micro Dust AFS $958.99 1791332 Powermatic PM1250 Micro Dust Filter $164.39 MICRO-DUST COLLECTION TECHNOLOGY The Innovative Micro-Dust Collection Technology continually purifies shop air as it filters down to 0.1 Micron with ultra-quiet efficiency by removing microscopic wood particulate from the shop environment ELECTROSTATIC AIR FILTER Boasting A 3,000-hour life, the electrostatic filter is easily cleaned by vacuum or blowing out dust with air 12

PM2200 CYCLONE DUST COLLECTOR Unmatched strength and efficiency Propriety Auto-Cleaning HEPA Filter technology for better filtration and longer filter life HEPA Filter collects 99.97% of all particles passing through as small as 0.3 Micron Powerful 3HP motor move 1,543 Cubic Feet of air per Minute Integrated vacuum lines in the drum retain the bag without the need for a separate bag frame One-handed drum release allows for simple removal of the drum for bag changes Vacuum pressure gauge for greater user feedback $4,109.99 Stock No. 1792200HK 1792200HK Powermatic Cyclone w/hepa Filter $4,109.99 1792200H PM2200 - HEPA Filter $616.49 PM1200 AIR FILTRATION SYSTEM Two-Filter system traps particles as small as 1 micron Remote control operates on radio frequency for wider range of effectiveness Timer has nine settings, for up to nine hours of continuous operation Inner filter has fine mesh pockets for high efficiency, can be blown clean Indicator lights up after 200 hours to remind user to replace filters Fully enclosed motor has overload protection for long service life Four eye bolts allow suspension from shop ceiling Inner filter efficient is 85% 1791330 PM1200 Air Filtration System, 1/4HP 1PH 115V $684.99 1791082 Inner Filter, PM1200 $95.89 1791083 Outer Filter, 12 x 24 x 1, for PM1200 $34.24 $684.99 Stock No. 1791330 13

TURBO CONE DUST COLLECTORS Remote-Controlled digital timer can be programmed for up to 99 minutes All-metal duct construction for rigidity and improved air flow Multiple 4 dust ports for simultaneous collection from different machines TurboCone improves chip separation and collector bag packing efficiency The cone eliminates premature filter clogging for sustained performance Canister filter offers over 6 times filtering surface area of standard bags $1,643.99 Stock No. 1792071K $1,369.99 Stock No. 1791079K 1791078K PM1300TX-BK Dust Collector, 1.75 HP, 1PH 115/230V, 30-Micron Bag Filter Kit $958.99 1791079K PM1300TX-CK Dust Collector, 1.75 HP, 1PH 115/230V, 2-Micron Canister Kit $1,369.99 1792071K PM1900TX-BK1 Dust Collector, 3 HP, 1PH 230V, 30-Micron Bag Filter Kit $1,643.99 1791072K PM1900TX-CK1 Dust Collector, 3 HP, 1PH 230V, 2-Micron Canister Kit $2,054.99 1792073K PM1900TX-BK3 Dust Collector, 3 HP, 3PH 230/460V, 30-Micron Bag Filter Kit $1,780.99 1791074K PM1900TX-CK1 Dust Collector, 3 HP, 3PH 230/460V, 2-Micron Canister Kit $2,054.99 1791087 20 Clear Collection Bags (Pack of 5) $27.39 1791077B Collection and Filter Bag Kit for PM1300TX $82.19 1791075F Filter Bag for PM1900TX $89.04 1791075B Collection and Filter Bag Kit for PM1900TX $205.49 1791086 Canister kit with Clear Collection Bags $452.09 Please visit www.fordmachinery.com 14

$3,698.99 PM2244 DRUM SANDER Integrated LCD Control Panel shows power, belt speed, and DRO Equipped with Feed Logic to produce an exceptional finish while preventing machine overload Secondary, absolute depth scale provides an additional height reading Drum carriage is cast iron to provide greater strength and consistent performance Steel head with a 4 dust port provides excellent dust collection Emergency stop for quick shutoff Large, chrome handwheel makes adjusting the drum height smooth and simple Belt tracking is designed to reduce the need for manual adjustment Integrated casters make it easy to move unit around the shop Included infeed/outfeed tables provide 37-1/2 of support for the workpiece Independent feed and drive motors provide exceptional sanding control Precision-flattened reinforced steel conveyor bed and no-give power feed belt provide a flat sanding surface for better results Stock No. 1792244 1792244 PM2244 Drum Sander, 1-3/4HP, 115 $3,698.99 179220X Pre-Cut Abrasive (3-Pack), Available 36g 220g $41.09 EA-X 50M roll, Abrasive, Available 36g 400g $179.99 Please visit www.fordmachinery.com 15

31A BELT DISC SANDERS Multi-Position belt head locks at any angle form 0 to 90 ; includes indexing pin for 0, 45, and 90 stops Belt and disc tables are precision ground cast iron with miter slots Belt table tilts down to 45, and can be set for beveled and mitered angle sanding Full cast iron platen with solid crowned aluminum drums for smooth sanding belt movement and support 6 belt provides large work surface for all of your needs 12 disc is balanced for flat, even coverage $2,191.99 Stock No. 1791291K 1791291K 31A Sander, 6 Belt/12 Disc, 1.5HP 1ph 115/230V, Manual Switch $2,191.99 1791292K 31A Sander, 6 Belt/12 Disc, 2HP 3ph 230/460V $2,191.99 Please visit www.fordmachinery.com OES9138 OSCILLATING EDGE SANDER 3HP motor with 9 abrasive belt handles large workpieces Oscillates 24 cycles per minute for better finish and longer belt life 9-1/2 x 48 platen with graphite pad offers largest work surface in its class Rugged bearing-assisted tensioning device for fast belt changes and quick adjust tracking Pedestal control switch for easy access Large 11-3/4 x 48 front table with 8 vertical travel and 45 tilt, includes miter head for angle work Precision balanced 9 diameter drive drum and 4 diameter rubber coated idler pulley for positive drive and ridged tracking Large radius end table has 6 vertical travel and 45 tilt for any angle and working height needed Heavy-duty oscillating gearbox and shaft for long maintenance-free use Hinged guard door opens for infinite length sanding Dual dust collection ports keep work area clean and extend abrasive belt life $7,945.99 Stock No. 1791282 1791282 OES9138 Oscillating Edge Sander, 3HP 1PH 230V $7,945.99 1791293 OES9138 Oscillating Edge Sander, 3HP 3PH 230/460V $7,945.99 16

60C AND 60HH JOINTERS Extra long tables are mounted on dovetailed ways, For extended workpiece support Adjustment lever offers quick infeed table positioning and fine-tuning for cut depth High mount switch for operator convenience Handwheel operated worm gear system for smooth fence tilting Non-mar fence insert protects table surface $2,739.99 Stock No. 1610084K 1610084K 60C, 8 Jointer, 2 HP, 1PH 230V, Magnetic Switch $2,739.99 1610086K 60HH, 8 Jointer, 2 HP, 1PH 230V, Magnetic Switch, Helical Cutterhead $3,287.99 2042376 Mobile Base $273.99 6296046 8 Jointer Knives (Set of 3) $123.29 1791221-6 HH6-6: 6 Grove Helical $737.19 54A AND 54HH 6 DELUXE JOINTERS 66 long adjustable infeed and outfeed beds mounted on dovetailed ways Features exclusive controlled chip cutterhead with 3 quick-set knives or helical cutterhead with carbide inserts Powermatic exclusive, 38 extra-long fence to control kickback New fine/quick adjustment lever on infeed table for precision cuts Spring-loaded front guard and fixed rear guard Two-way tilting fence with positive stops at 45 and 90 $1,506.99 Stock No. 1791279DXK 1791279DXK 54A, 6 Jointer, 1 HP, 1PH 115/230V, Quick-Set Knives $1,506.99 1791317K 54HH, 6 Jointer, 1 HP, 1PH 115/230V, Helical Cutterhead $2,191.99 2042374 Mobile Base $273.99 708801DX 6 Jointer Knives (Set of 3) $123.29 17

J882 8 PARALLELOGRAM JOINTERS 2HP 1PH motor Large 8 x 82 table surface Helical cutterhead with 4-sided carbide knife inserts provides smoother, quieter cutting and finer finish than conventional systems 1/8 depth of cut limiter control knob Handwheel with worm gear system for precise fence tilting (Patented) Parallelogram design helps maintain table parallelism and eases tables raising and lowering High mount switch No-mar Fence insert $3,561.99 Stock No. 1610079 1610079 PJ-882, 8 Parallelogram Jointer, 2 HP, 1PH 230V $3,561.99 1610082 PJ-882HH, 8 Parallelogram Jointer, 2 HP, 1PH 230V, Helical Cutterhead $4,383.99 1610078 Mobile Base $342.49 6296046 8 Jointer Knives (Set of 3) $123.29 1285 JOINTER Rack and pinion adjustable cast iron fence assembly for smooth fence positioning without play Parallelogram design for close table-to-cutterhead proximity and fast depth of cut adjustments Large 84 x 12 table surface for heavy-duty work Table lips on both sides of cutterhead aid in noise reduction Full size rabbeting ledge supports large workpieces for rabbets up to 3/4 deep 3 HP motor provides plenty of power $8,219.99 Stock No. 1791241 1791241 1285, 12 Jointer, 3 HP, 1PH 230V $8,219.99 1791307 1285, 12 Jointer, 3 HP, 1PH 230V, Helical Head $9,589.99 1791308 1285, 12 Jointer, 3 HP, 3PH 230/460V, Helical Head $9,589.99 6400013 Inserts (Set of 10) for Model 1285 and PJ1696 Helical Heads $136.99 PJ1696-011 Rabbet Inserts (Set of 2) for Model 1285 and PJ1696 Helical Heads $6849 18

20 PLANERS 5HP motor and 20 planning capacity for heavy duty work Fully enclosed base cabinet with integrated casters for shop mobility Cast iron table with extensions creates a big 55-1/2 x 20 working area Four feed speeds - 24 and 31 FPM, 16 and 20 FPM with gear change provide versatility Feed rollers and cutterhead supported by full cast iron head assembly for rigidity 1791296 209, 20 Planer, 5 HP, 1PH 230V $4,109.99 1791297 209, 20 Planer, 5 HP, 3PH 230/460V $4,109.99 1791315 209HH-1, 20 Planer, 5 HP, 1PH 230V, Helical Head $6,164.99 1791316 209HH-3, 20 Planer, 5 HP, 3PH 230/460V, Helical Head $6,164.99 1791275A Helical Cutterhead (209HH) $2,054.99 6292621 Knives, Single Sided (Set of 4) for models 208, 209 $342.49 $4,109.99 Stock No. 1791296 15HH PLANER The helical cutterhead with 74 four-sided knife inserts provides smoother, quieter cutting and finer finish than conventional systems Powerful 3HP TEFC motor controlled with a magnetic switch for safety Three V-belts transfer maximum power to the cutterhead Serrated steel infeed roller and smooth steel outfeed roller allow for 1/8 maximum depth of cut and trouble free operation Large cast iron handwheel positions table quickly and easily Large, precision ground cast iron table and extensions provide maximum workpiece support $4,383.19 Stock No. 1791213 1791213 15HH, Planer, 3HP, 1PH 230V, no DRO $4,383.19 1791211A Helical Cutterhead $1,602.89 1791212 Helical Head Inserts (Set of 10) $95.89 708816 Knives, HSS (Set of 3) for Model 15S $123.29 6284800 Knives, Double Sided (Set of 3) for Model 15 $205.49 19

PM2700 SHAPERS Integrated caster system built into the cast iron base for instant shop mobility Spindle height digital readout for making fine incremental adjustments on multiple passes Heavy duty 30 x 40 precision ground tabletop for smooth stock feeding Convenient quick lock belt tensioning for easy speed adjustment Industrial fence system with fine adjust dials for more precise positing 3HP and 5HP totally enclosed motor offers plenty of power Two spindle speeds (reversible) for a variety of work Superior clear cutter guard promotes safety, allows observation of the entire cut 460V operation requires optional 460V magnetic switch Table predrilled and tapped for feeder mounting in two locations Fence has dual featherboards for work holding $5,205.99 Stock No. 1280100C 1280100C PM2700 Shaper, 3 HP, 1PH 230V, DRO, Casters $5,205.99 1280101C PM2700 Shaper, 5 HP, 1PH 230V, DRO, Casters $5,479.99 1280102C PM2700 Shaper, 5 HP, 3PH 230/460V, DRO, Casters $5,479.99 1791205 1 Spindle for PM2700 Shaper $246.59 1791207 1/4 Router Collet for PM2700 Shaper $123.29 1791208 1/2 Router Collet for PM2700 Shaper $123.29 6293198 1 Spindle for 29 Shaper $410.99 6293199 1-1/4 Spindle for 29 Shaper $479.49 20

TS29 SHAPER Sliding Table with 4-foot stroke works with mitre head, hold-down and fence to accommodate everything from multiple end cuts to tenons Fully adjustable fence with dual digital readout for fast, accurate set-up and repeatability Large table with built-in slider with room for stock feeder 7 vertical spindle travel allows stacked tooling Spindle tilts negative 5 to positive 45 for increased versatility Large diameter multiple table inserts accommodate virtually any size cutter Five spindle speeds in forward and reverse with lighted indicator $13,425.99 Stock No. 1791284 1791284 7.5HP 3PH 230/460V, Sliding Table $13,425.99 POWER FEEDERS Continuous-duty motor Roller chain and sprockets provide positive feeding for a variety of work Support column is fully adjustable for horizontal, vertical or angled feeder position Feeder body, column base and joints are made with solid cast iron construction providing stability and eliminates vibration Rollers can be changed out easily and quickly $1,506.99 Stock No. 1790800K 1790800K PF-33 Power Feeder, 1HP, 3PH 230V, 4-Speed, 3 Wheel $1,506.99 1790807K PF-31 Power Feeder, 1HP, 1PH 115V, 4-Speed, 3 Wheel $1,643.99 1790811K PF-43 Power Feeder, 1HP, 3PH 230V, 4-Speed, 4 Wheel $1,643.99 1790812K PF-41 Power Feeder, 1HP, 1PH 1150V, 4-Speed, 4 Wheel $1,780.99 1790818 PF3-JR Power Feeder, 1/4HP, 1PH 115V, 4-Speed, 3 Wheel $1,000.09 21

MOBILE BASES Spring-pin snap adjustment requires no tools for easy assembly Adjustable width and length let you configure the base to the tool for total support and portability Two fixed and two swivel casters provide easy maneuverability Available in heavy-duty or industrial-style to meet your needs $287.69 Stock No. 2042377 $342.49 Stock No. 1610078 $273.99 Stock No. 2042376 Mobile Base Fits Description Price Stock No. Machine 2042377 1791216K PWBS-14CS 14 Bandsaw $287.69 1610078 1610079 PJ-882 8 Parallelogram Jointer $342.49 1610082 PJ-882HH 8 Parallelogram Jointer 2042376 1610084K 60C 8 Jointer $273.99 1610086K 60HH 8 Jointer 2042374 1791279DXK 54A 6 Jointer $273.99 1791317K 54HH 8 Jointer fs Please visit www.fordmachinery.com 22

POWERMATIC WARRANTY POLICY The Powermatic promise is something we take very seriously, and the warranty and the service aspects are the backbone of the promise. We work everyday to manufacture the best machines in the business. Machines that let you do your best work, and machines that give you the peace of mind that they ll perform for you, year after year. In the rare case that something should go wrong, we re here to resolve your problem quickly, and with the expertise you ve come to expect from Powermatic. FIVE YEAR WARRANTY Powermatic proudly offers a Five Year Warranty on all woodworking machines. Woodworking machines that are used for commercial or industrial purposes default to a Two Year Warranty. Powermatic woodworking machinery is designed to be used with wood. Use of these machines in the processing of metal, plastics, or other materials may void the warranty. The exceptions are acrylics and items that are made specifically for wood turning. SERVICE If a Powermatic tool needs service or repair, please contact Dubiner Industries Limited by calling, 905-771-6111, 8:30AM to 5:00PM EST, Monday through Friday.

FORD MACHINERY SUPPLY CELEBRATING MORE THAN 80 YEARS IN THE BUSINESS! Started in 1936 by Jack Dubiner in the heart of Toronto s machinery district at King and Jarvis. We are still family-owned and operated, spanning four generations! We offer a vast and varied inventory of new, used and rebuilt machinery for all your needs. Everything from woodworking machinery, metalworking machinery and tinsmithing machinery, to power tools, electric motors and accessories. A dependable source of experience and expertise, we operate out of two warehouses. With complete rebuilding facilities we service everything we sell. Expert service is available for all machinery, in your shop or ours. No matter what the demand, Ford Machinery Supply has what you need to do the job right. Visit us today at our sales and service center in Richmond Hill or browse through our extensive online catalogue.