Features: long operating life Small footprint and low profile Energy efficient High current operation Silicone encapsulation Available in 27K, 3K, 35K, 4K, 5K, 57K, 65K and 1K The product itself will remain within RoHS compliant Version Descriptions: The HP6M series is available in Red, Orange, Yellow, Green, Blue and White. The White Power LED is available in the range of color temperature from 27K to 1K This is a high energy efficient device which can handle high thermal and high driving current. The exposed pad design enables excellent heat transfer from the package to the motherboard The package design is suitable for a wide variety of applications especially where height is a constraint. Applications: Architectural lighting Channel backlighting Contour lighting Retail Display lighting Decorative lighting Garden lighting Copyright 217 Luckylight All Rights Reserved Page: 1 / 9
Part No. HP6MW6G Emitting Color Warm White Package Dimension: Anode(+) Slug Cathode(-) Anode(+) Cathode(-) Lens Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±.25 mm (.1 ) unless otherwise noted. Copyright 217 Luckylight All Rights Reserved Page: 2 / 9
Absolute Maximum Ratings at Ta=25 Parameters Symbol Max Unit Power Dissipation Pd 133 mw Peak Forward Current (a) IFP 5 ma DC Forward Current (b) IF 35 ma Reverse Voltage VR 5 V LED Junction Temperature Tj 12 Operating Temperature Range Topr -4 to +85 Storage Temperature Range Tstg -4 to +8 Notes: a. Derate linearly as shown in derating curve. b. Duty Factor = 1%, Frequency = 1 khz Electrical Optical Characteristics at Ta=25 Parameters Symbol Min. Typ. Max. Unit Test Condition Luminous Flux (a) Φv 8 11 --- lm IF=35mA Viewing Angle (b) 2θ1/2 --- 135 --- Deg IF=35mA Chromaticity Coordinates (C) x ---.43 --- y ---.4 --- IF=35mA Color Temperature CCT 26 3 35 K IF=35mA Color Rendering Index CRI 7 --- --- Ra IF=35mA Forward Voltage VF 2.8 3.4 3.8 V IF=35mA Reverse Current IR --- --- 5 µa VR=5V Notes: a. ALuminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve. b. 2θ1/2 is the o -axis angle where the luminous intensity is 1 2 the peak intensity c. The dominant wavelength (λd) is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. Copyright 217 Luckylight All Rights Reserved Page: 3 / 9
Typical Electrical / Optical Characteristics Curves (25 Ambient Temperature Unless Otherwise Noted) Relative Spectral Power Distribution Relative Light Output (%) IF-Forward Current (ma) 1 75 5 25 Light Output Characteristics 2 18 16 14 12 1 8 6 4 2-2 2 4 6 8 1 1214 Junction Temperature, Tj ( ) 75 6 45 35 3 15 Relative Luminous Intensity & Wavelength Ta=25 3 4 5 6 7 8 Wavelength λp (nm) Current Derating Curves IF-Average Forward Current (ma) Normalized Relative Luminous Flux Relative Intensity (%) Forward Current & Forward Voltage 1.4 1.2 1..8.6 Relative Luminous Flux & Forward Current Ta=25 f=1khz Duty=1/1.4.2. 1 2 3 4 5 IF-Average Forward Current (ma) Ta=25 1. 5 o.9 6 o.8 7 o 8 o.7 9 o 2 4 6 8 1.5.3.1.2.4.6 Ta-Ambient Temperature ( ) Angular Displacement (Degrees) 1 8 6 4 2 o Ta=25 2.8 3. 3.2 3.4 3.6 3.8 4. VF-Forward Voltage (V) 1.6 Radiation Diagram 1 o 2 o 3 o 4 o Copyright 217 Luckylight All Rights Reserved Page: 4 / 9
CIE 1931 Chromaticity Diagram:.46 Y.45.44.43.42.41.4.39.38.37.36 H4-2 H3-2 38K H2-2 H4-3 H1-2 H3-3 36K H2-3 H4-4 H1-3 H3-4 34K H2-4 H1-4 I2-1 I3-1 I3-2 I4-2I4-3 I4-1 28K 29K 3K 31K 32K I1-5 I1-4 I1-2 I1-3 I1-1 J2-1 I2-4 I2-5 I2-3 I2-2 J3-2 J3-1 I3-5 I3-4 I3-3 J4-2 J4-3 I4-5 J4-1 I4-4 26K 27K J2-2 J3-3 J4-4 J1-1 J1-2 J2-3 J3-4 25K J1-3 J2-4 24K J1-4 23K.35.34.36.37.38.39.4.41.42.43.44.45.46.47.48.49.5.51.52 X Chromaticity Coordinates Specifications for Bin Rank: Bin Code Left x Left y Top x Top y Right x Right y Bottom x Bottom y H1-2.392.394.42.399.47.413.396.48 H2-2.388.381.397.386.42.399.392.394 H3-2.384.367.393.372.397.386.388.381 H4-2.38.354.388.358.393.372.384.367 H1-3.42.399.412.43.418.419.47.413 H2-3.397.386.47.39.412.43.42.399 H3-3.393.372.42.376.47.39.397.386 H4-3.388.358.397.362.42.376.393.372 H1-4.412.43.425.41.432.426.418.419 H2-4.47.39.419.396.425.41.412.43 H3-4.42.376.413.382.419.396.47.39 H4-4.397.362.47.368.413.382.42.376 I1-1.425.41.431.412.438.428.432.426 I2-1.419.396.424.398.431.412.425.41 I3-1.413.382.418.384.424.398.419.396 I4-1.47.368.412.37.418.384.413.382 I1-2.431.412.437.414.445.43.438.428 I2-2.424.398.43.4.437.414.431.412 I3-2.418.384.423.385.43.4.424.398 Copyright 217 Luckylight All Rights Reserved Page: 5 / 9
I4-2.412.37.417.372.423.385.418.384 I1-3.437.414.444.416.452.432.445.43 I2-3.43.4.437.42.444.416.437.414 I3-3.423.385.43.387.437.42.43.4 I4-3.417.372.423.374.43.387.423.385 I1-4.444.416.451.418.459.434.452.432 I2-4.437.42.444.44.451.418.444.416 I3-4.43.387.436.389.444.44.437.42 I4-4.423.374.429.376.436.389.43.387 I1-5.451.418.46.421.468.436.459.434 I2-5.444.44.452.47.46.421.451.418 I3-5.436.389.444.392.452.47.444.44 I4-5.429.376.436.378.444.392.436.389 J1-1.46.421.466.422.475.437.468.436 J2-1.452.47.458.48.466.422.46.421 J3-1.444.392.449.393.458.48.452.47 J4-1.436.378.441.379.449.393.444.392 J1-2.466.422.475.424.484.439.475.437 J2-2.458.48.467.41.475.424.466.422 J3-2.449.393.458.395.467.41.458.48 J4-2.441.379.449.381.458.395.449.393 J1-3.475.424.483.425.493.44.484.439 J2-3.467.41.475.412.483.425.475.424 J3-3.458.395.465.397.475.412.467.41 J4-3.449.381.456.383.465.397.458.395 J1-4.483.425.493.427.53.442.493.44 J2-4.475.412.484.414.493.427.483.425 J3-4.465.397.474.399.484.414.475.412 J4-4.456.383.465.385.474.399.465.397 Notes: 1. Color coordinates measurement allowance is ±.15. 2. One delivery will include up to two consecutive color ranks and three luminous intensity ranks of the products the quantity-ratio of the ranks is decided by Luckylight. Copyright 217 Luckylight All Rights Reserved Page: 6 / 9
Packing Standard: Normal packing weight:.41kg/each tube,.877kg/1k Copyright 217 Luckylight All Rights Reserved Page: 7 / 9
CAUTIONS 1.Storage: To avoid moisture, we recommend storage conditions for the unopened LED +5 ~ +3 C, relative hu-midity <6%. LED should be used within 24 Hrs. of opening the package. Please make sure to dehumid-ify and vacuum pack the remaining/ unused LED. Dehumidifying condition: +6 C ± 5 C, 12 Hrs. Effective age for the sealed led is one year. 2.The assembly notes: Soldering Conditions: Reflow soldering is recommended for this LED, the maximum temperature of reflow should not exceed 21 C (when using at 7mA, please adopt the soldering operation mode with copper pad at the bottom. Please consider the life time risk if use the thermal conductive resin with Copper pad at the bottom ). If hand soldering, set soldering iron temperature at 35 C and soldering time not More than 3 seconds, after the first soldering, make sure the substrate surface temperature returns to ambient temperature be-fore a second soldering. Do not bend the LED PCB after soldering. Use recommended cleaning agent for PCB cleaning (Should not be use directly in the fluid) Please make sure when soldering, there is no external force on the soldering surface (such as pressure, friction or sharp metal nails, etc.), to avoid gold wire deformation or damage and other abnormalities. If beyond recommended conditions, we cannot guarantee the LED stability, please do the risk assess-ment first. 3.Anti-Static Measures: Please take adequate measures to prevent electrostatic generation, such as wearing electrostatic ring or anti-static fingerstall etc; any relative products like plant equipment, machinery, carrier and transporta-tion units shall be connected to discharging unit/ ground. After assembly, please make sure to discharge Static Electricity with proper ESD equipment. 4.Temperature Control: Recommended temperature conditions for enhanced product life: The temperature of copper pad is <75 C. Dur-ing assembly, please ensure that a good quality thermal paste is applied and distributed evenly over the surface. While using thermal pad (Heat Sink), make sure LED is firmly tightened and there is no gap between surfaces. This product Heating conditions, tested at 5V with medium surface contact. 5.drive control: Drive this product at constant current. Output current range specifications should be according to the operational and other conditions, as mentioned in data sheet. Before using a constant voltage source or altered specifications, other than recommended, please consider risk factors. 6.Other: Product is not suitable to use in following conditions; -Direct or indirect wet / damp conditions, such as rain, etc; -in contact with sea water and erosive materials; -Exposed to corrosive gases (e.g., Cl2, H2S, NH3, SOx, NOx, etc.); Copyright 217 Luckylight All Rights Reserved Page: 8 / 9
-Exposed to dust, liquids or oils; Terms and conditions for the usage of this document: 1. The information included in this document reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Luckylight will not be responsible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with Luckylight representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Luckylight. Copyright 217 Luckylight All Rights Reserved Page: 9 / 9