for electrically insulating, amplifying and converting DC signals, also designed for FSK 002 II () G pplication The purpose of the isolating amplifi er SIRX TV 808 (Fig. ) is to electrically insulate input and output signals, respectively to amplify and/or change the signal level or type (current or voltage) of the input signals. The instrument version SIRX type 808- has an intrinsically safe and an FSK continuity function and is used to control smart I/P valve positioner in explosion hazard areas. The valve positioner adjust, for example, a pressure or the position of a valve in relation to the impressed output current ( 20 m). The RT bypass permits bi-directional FSK signals to pass according to the RT protocol. green LD on the front plate indicates device standing by. The power supply and the inputs and outputs are electrically insulated. Fig.. Plug-in module SIRX TV 808 for plugging onto backplane BP 902. Variants and non-x isolating amplifiers Designed or not designed for FSK communication User-specific input ranges Power supply 2 0 V DC/C or 8 230 V DC/C Features / Benefits Isolating amplifi er plugs onto backplane (mechanically latched by fasterners), all electrical connections made to the backplane and not to the SIRX TV 808 / Thus no wiring when replacing devices Designed for FSK communication, hand-held terminal connected to separate terminals. This facilitates operation in conjunction with a smart I/P valve positioner designed for FSK and with a RT or userspecific protocol lectric insulation between input, output (2.3 kv) and power supply (3.7 kv) / Prevents measurement errors due to potential leakage Burden voltage 20 V for not x versions or V for x instruments Non-standard user-specific ranges available C/DC power supply / Universal vailable in type of protection Intrinsic safety [x ia] IIC (see Table 3: Data on explosion protection ) Technical data Measuring input DC current: DC voltage: FSK = Frequency Shift Keying Standard range 20 m Limit value 0 0. to 0 0 m also live-zero, 0. 0 0. to 20 0 20 m max. span: 0 m also bipolar asymmetrical R i = Ω Limit values 0 0.0 to 0 0 also live-zero, 0.0 0 0.0 to 20 0 20 V, max. span: 0 V R i = 00 kω Camille Bauer Data sheet TV 808-//7/8 Le 0.09
Overload capacity: Measuring output DC current: DC current continuously 2-fold DC voltage continuously 2-fold Standard ranges 20 m, 0 20 m 20 m, 20 0 m Burden voltage: Non-x version 20 V, x version V xternal resistance: Non-x version 000 Ω, x version 70 Ω Current limiter at R ext max.: Voltage limiter at R ext = : Residual ripple in output current: Response time: Power supply pprox.. I N pprox. 2 V 0.% p.p. < 0 ms C/DC power pack (DC and...00 z) Table : Nominal voltages and tolerances Nominal voltage U N Tolerance Instrument version 2 0 V DC/C 8 230 V DC/C DC 33% C ± % 2 0 V DC/C DC 33% C ± % 8 230 V C ± 0% 8 0 V DC 0% Power input:.2 W resp. 3 V Standard (non-x) Type of protection Intrinsically safe [x ia] IIC ccuracy data (acc. to DIN/IC 770) Basic accuracy: Limit error ± 0.2% Including linearity and reproducibility errors Reference conditions: mbient temperature Power supply Output burden Influencing factors: Temperature 23 C, ± 2 K 2 V DC ± 0% and 230 V C ± 0% Current: 0. R ext max. < ± 0.% per 0 K For power supplies > 2 V, the auxiliary circuits should include an external fuse with a rating 20 DC. Burden infl uence < ± 0.% Longtime drift < ± 0.3% / 2 months Switch-on drift < ± 0.2% Common and transverse mode infl uence < ± 0.2% Output or connected to ground < ± 0.2% Installation data ousing: Material of housing: Designation: SIRX TV 808 Mounting position: lectrical connections: Coding: Weight: lectrical insulation: Regulations lectromagnetic compatibility: Isolating amplifi er in housing B7 for plugging onto backplane BP 902. Refer to Section Dimensional drawing for dimensions Lexan 90 (polycarbonate) fl ammability class V-0 acc. to UL 9, self-extinguishing, non-dripping, free of halogen ny 9-pin connector acc. to DIN 2, pattern C Layout see Section lectrical connections Isolating amplifi er supplied already coded. The rack is coded by the user by fi tting the coding inserts supplied pprox. 0. kg ll circuits (measuring input/measuring output/power supply) are electrically insulated The standards DIN N 0 08-2 and DIN N 0 082-2 are observed Intrinsically safe: cc. to N 0 020: 99 ousing protection (acc. to IC 29 resp. N 0 29): ousing IP 0 Terminals IP 00 lectrical standards: cc. to IC 00 resp. N 00 Operating voltages: < 300 V between all insulated circuits Contamination level: 2 Overvoltage category acc. to IC : Double insulation: III for power supply II for measuring input and measuring output Power supply versus all circuits Measuring input versus measuring output 2 Data sheet TV 808-//7/8 Le 0.09 Camille Bauer
Test voltage: nvironmental conditions Climatic rating: Measuring input versus: Measuring output 2.3 kv, 0 z, min. Power supply 3.7 kv, 0 z, min. Measuring output versus: Power supply 3.7 kv, 0 z, min. Climate class 3Z acc. to VDI/VD 30 Commissioning temperature: 0 to C Operating temperature: 2 to C, x* 20 to C Storage temperature: 0 to 70 C nnual mean relative humidity: 7% ltitude: Indoor use statement! 2000 m max. * The data of the C-Type xamination Certifi cate for backplane SIRX BP 902 with admission PTB 97 TX 23 should be noted. Table 2: Ordering Informations Description Marking. Mechanical design ousing B7 (for plugging onto backplane BP 902, see data sheet BP 902) 808-2. Number of channels channel 3. Version / Power supply [x ia] IIC, 2 0 V DC/C (output intrinsically safe) [x ia] IIC, 8 0 V DC / 230 V C (output intrinsically safe) Standard, 2 0 V DC/C 7 Standard, 8 230 V DC/C 8. Function input, electrically insulated output input, electrically insulated output, designed for FSK communication (RT) (Condition: Input and output 20 m). Input signal 20 m Input [V] 9 [V] 0 0.0 to 0 0, also live-zero, [V] 0.0 0 0.0 to 20 0 20, max. span 0 V also bipolar asymmetrical Input [m] Z [m] 0 0. to 0 0, also live-zero, [m] 0. 0 0. to 20 0 20 max. span 0 m also bipolar asymmetrical. Output signal 20 m 0 20 m B 20 m C 20 0 m D With FSK communication (RT) only possible with 20 m Possible special versions, e.g. increased climatic rating on inquiry. Table 3: Data on explosion protection II () G Order code Type of protection Output Input/Power supply Type xamination Certifi cate Mounting location 808 -... 808 -... [x ia] IIC U o = 27.3 V I o = 99 m P o = 7 mw IIC IIB L o. m m U m = 23 V C resp. 2 V DC PTB 98 TX 200 Outside the hazardous area C o 82 nf 77 nf Camille Bauer Data sheet TV 808-//7/8 Le 0.09 3
Compatibility Most of the usual smart valve positioners (current-to-pneumatic converter) on the market with IS approval are compatible with the intrinsically safe output of the TV 808 (see Table ). On inquiry, we will verify if other valve positioners can be used. Table : Manufacturer Type x designation Neles Jamesbury lsag Bailey- & B ND820 TZID Samson 3780 Foxboro ckhart Fisher Controls Siemens x ia IIC T, T Demko 9D, 209 x ia IIC T, T, T PTB Nr. -9.C.233 X x ia IIC T PTB Nr. x-9.c.09 U i [V] I i [m] P i [mw] L i [m] C i [nf] 30 00 0 0 30 0 00 0.0.2 28 000 0.3 SRD99 x ia IIC (T) 30 30 900 0. Fieldvue DVC 000 SIPRT PS x ia IIC T LCI 9.D x ib IIC T, T, T PTB Nr. x-9, C, 238, Zone 30 227 700 0 0 30 00 000 Burden voltage [V] Burden [Ω] 2. V 30 Ω 0.8 V 0 Ω 0.8 V 0 Ω 2.0 V 00 Ω 2.0 V 00 Ω.0 V 0 Ω lectrical connections SIRX TV 808 Front SIRX TV 808 Rear Fastener c b a 2 3 B C 8 7 Camille Bauer G C-0 Wohlen Switzerland SIRX TV 808 Without function Green LD for indicating device standing by D F G I K L M 20 27 2 28 29 30 3 32 FSK () ~ () ~ T Plug-in module SIRX TV 808 a a3 c27 c29 a2 a28 a20 c Backplane Connecting allocation see Operating Instructions of backplanes = Input = Output = Power supply T = and-eld-terminal T () ~ () ~ Data sheet TV 808-//7/8 Le 0.09 Camille Bauer
Plug allocations Instruments version Wiring diagram / Plug allocation Types Input non-x 808- or 808- Output intrinsically safe, Burden voltage V, c 2 8 a 3 7 20 Safe area () () 20 m azardous area X e.g. I/P-converter designed for FSK 27 29 3 2 28 30 32 FSK 20 m T Fig. 2 Safe area Types 808-7... or 808-8... Input and output non-x, Burden voltage 20 V, FSK (option) c 2 8 a 3 7 20 () () Fig. 3 27 29 3 2 28 30 32 FSK T T = and-eld-terminal Camille Bauer Data sheet TV 808-//7/8 Le 0.09
Table : ccessories and spare parts Description Coding comb with 2 sets of codes (for coding the backplane BP 902) Operating Instructions V 808-//7/8 B d-f-e Order No. 07 97 3 839 Standard accessories Operating Instructions for SIRX TV 808 in three languages: German, French, nglish Codieng comb with 2 sets of codes Type examination certifi cate (for instruments in type of protection Intrinsically safe only) Dimensional drawing 0.7 0 03.3 23. 3. 3.7 8 0 0. Fig.. SIRX TV 808 in housing B7. Rely on us. Camille Bauer Ltd argauerstrasse 7 C-0 Wohlen / Switzerland Phone: 8 2 Fax: 8 3 3 e-mail: info@camillebauer.com www.camillebauer.com Subect to change without notice dition 0.09 Data sheet TV 808-//7/8 Le