Cable glands and accessories

Similar documents
Polymas Industrial Watertight Enclosure

Expandable braided sleeving

Accessories for cable trunking

Miscellaneous retaining products

The Superior Choice for Material Handling Equipment 22.5 mm 800FC

Thermistor motor protection relays

24 V DC, 12 W output 12 V DC, 12 W output 24 V DC, 36 W output

Cable trunking SES. with slots and base punching. Trunking programme: Accessories: C3/1 C3/5 C3/6 C3/7 D4/6-01

Rated power VA (50 Hz)/W 0.6/ / / /0.3 Operating range V AC (50/60 Hz)

4.3 Section CONDUIT INSTALLATION ACCESSORIES. Thinking of the environment. Fixing accessories Coupling accessories

Euromas Polymas. Colour: Silver grey, similar to RAL 7001; special colours on request

Pressure transmitter For general industrial applications Model A-10

Product range Cable Glands

Pressure transmitter for general industrial applications Model A-10

Antimicrobial call units, nurse call units. Antimicrobial snap-on trunking. Antimicrobial bedhead strips. Isolating transformers for hospitals

Pressure transmitter for general industrial applications Model A-10

Digital inductive conductivity transmitter

SW 16mm. SW 15mm. SW 19mm

Setting Standards Connectors M 16

Flexicon Flexible Conduit, Glands and Clamps

INSERTION paddle wheel flowmeter for continuous flow measurement

n 019/ SEPTEMBER 2003 Page: 1

HARAX. Contents Technical characteristics circular connector with HARAX rapid termination 50.02

Pressure transmitter For general industrial applications Model A-10

Industrial Ethernet OPT cable manufactured for Petrol Forecourt Applications.

Technical Data. General specifications. Rated operating distance s n 3 mm

Annexe to: IECEx SIR U Issue 5 Redapt Engineering Co. Limited Electrical Component: Ranges of Adaptor, Reducers and Stopping Plugs

Type PLC Fitting. Valve for Continuous control. Diaphragm valve. Output

Incremental Shaft Encoders Industrial types

ph or ORP Transmitter

Pressure transmitters MBS 4201, MBS 4251, MBS 4701 and MBS 4751

OEM pressure transmitter for general industrial applications Models O-10 (T), O-10 (5)

SensyTemp TSBA (BA R) Resistance thermometer for building automation, machine construction and environmental engineering

Specialist liquid tight products LTPSS system stainless steel pvc coated liquid tight LTPPU system galvanised steel, polyurethane coated liquid tight

CLIC TOP 17. Features

SIGNAL // POWER // INDUSTRIAL ETHERNET

XXXX e. X d.. X X X a

DMP 343. Industrial Pressure Transmitter. Without Media Isolation. appmeas.co.uk +44 (0)

High-quality pressure transmitter For general industrial applications Model S-10

DMP 343. Industrial Pressure Transmitter. Without Media Isolation. accuracy according to IEC 60770: 0.35 % FSO. Nominal pressure

Ex-control switch Typ 294 without and Typ 295 with measuring instrument

Amphenol. Circular. Connectors C 16-1 / C Circular Connectors. Amphenol-Tuchel Electronics

INLINE flowmeter for continuous flow measurement

Temperature Sensor with G1/2" hygienic

Condumax W CLS19. Technical Information. Conductivity sensors Two-electrode sensors with cell constants k = 0.01 cm 1 or k = 0.

XXXX e. X d.. X X X a

Wind Transmitter compact xx

NEW. Automation Technology 768 series

Digital flow ELEMENT transmitter for continuous flow measurement

JUMO Dtrans T100 Screw-in RTD Temperature Probe with/without Transmitter

Rotary Measurement Technology Incremental Encoders

A q u a r i u s 3 5 M e d i u m a n d A q u a r i u s 3 5 W i d e

Electrical Temperature Measurement

Pharma-Temperature Sensor M12 hygienic

FLOAT LEVEL SENSOR TFC. Applications. Reference. Features

Local control stations for Zone 1 and Zone 21. Features. Description

Pluggable connection describes the method used to connect an external conductor to a PCB, via a terminal connector and header

INLINE flowmeter for continuous flow measurement

Air-supply elements. Air-supply elements MGE Flanged plate (p. 5-3) M12-1/4" (p. 5-4) Longitudinal end connector (p.

Technical Information Nivector FTC968, FTC968Z

Incremental Shaft Encoders Industrial types

gabotherm Skirting Board Systems gabotherm Comfort (Heating Skirting Board) 58 Comfort E (Heating and Electric Skirting Board) 59

Digital conductivity transmitter

Temperature Sensor with M12 hygienic

Temperature Sensor with M12 hygienic

HEICO-LOCK WEDGE LOCK WASHERS

Product Guide TERMINAL BLOCKS & CONNECTORS SWITCHES LAMPHOLDERS & LIGHTING ACCESSORIES

Coil. Coil L 12 VDC 135 C 18 W 7.7 Ω M M 24 VDC 135 C 18 W 31 Ω M AMP Junior (AJ variant) Coil

The transducer component converts the measured signal and displays the actual value.

Wind Direction Transmitter - compact - GMR, analogue output xxx xxx

FITTINGS & GAUGES 20,000 PSI

Signal Beacon - LED Series 6162

Float Switches with Permanent Magnet For Vertical Installation Model RSM

OptiLine 45 Floor boxes


OEM radar transmitter, for aggressive media level measurement

Digital flow ELEMENT transmitter for continuous flow measurement

Phone: Fax: Web: -

TECHNICAL DATASHEET Incremental Encoder RI 58-O / RI 58-T

Electromagnetic Flow Transmitter

Digital flow transmitter for continuous flow measurement

Cabtite Cable entry system. Cable entries and Cabtite

Condumax W CLS19. Technical Information. Conductivity sensors Two-electrode sensors with cell constants k = 0.01 cm 1 or k = 0.

OEM pressure sensor For industrial applications Models O-10 (T), O-10 (5)

Resistance Thermometers Model Series TR7X0, Sheathed Design

Temperature Sensor G1/2" Standard

Standard Industrial Types RI 58-O / RI 58-T

ANAMET SPIRAL CONDUIT TYPE MPC GREY

Pharma Temperature Sensor G3/8"

Medium Voltage Power Cables

MIG/MAG Welding Torch ABIMIG 401 WT / ABIMIG 501 WT liquid-cooled, with divided liner

Temperature Sensor G1/2" Standard

Process transmitter Model UPT-20, with pressure port Model UPT-21, with flush diaphragm

Standard Industrial types RI 58-O / RI 58-T

prosonic T FMU230, FMU231

CEAG Products Main Catalogue Part 2: Chapter Ex-Control units and control stations. EATON 2.4.1

ECT Applications. Features

Rotary Position Technology Incremental Encoders

Inductive conductivity transmitter JUMO CTI-Junior

Flow Measurement SITRANS F M

Transcription:

Cable glands and accessories PLIO Pages Products Temperature Material IP Thread Colours in C PG metric Grey Black Light grey RAL 7001 9005 7035 A8/1 PE cable gland -30 to +80 PA6 68 A8/2 PEC conical -30 to +80 PA6 54 cable gland A8/06 BC locking plugs -30 to +80 PA6 - with flange A8/07 Protectors PT -30 to +80 PA6 - A8/10 CE lock-nuts -30 to +80 PA6 - A8/11 CEC conical -30 to +80 PA6 - lock nuts Ask for our Cable glands AGRO catalogue This catalogue contains 8 groups: Metallic cable glands Polyamide cable glands CEM cable glands Ex cable glands made of metallic and synthetic material (ATEX 95) Combination conduit glands with integrated cable gland made of metal Flanged elbows Accessories: lock-nuts, reductions and enlarging fittings, locking plugs etc... Protective cable conduits, conduit glands and accessories. A8/0-02 VII/05 A8/0-02

Conical cable gland PLIO -PE PLIO-PE O-ring: Polychloroprene Colours: grey (RAL 7001) - black (RAL 9005) - light grey (RAL 7035) Protection rating: IP 68 Temperature range: -30 to +100 C permanent Specifications: EN 50262 Applications: Anti-vibration mecanical tightening. Blocking part with multiple facets that guarantee an equal compression against cable and an optimal resistance against tensile strength. Cable glands PG grey black light grey cable Ø L type 013 010 025 mm mm mm mm PLIO-PE PG 7 0636 0101 013 0636 0101 010 0636 0101 025 2,5-6,5 15 21 8 100 PLIO-PE PG 9 0636 0102 013 0636 0102 010 0636 0102 025 3-8 19 23 8 50 PLIO-PE PG 11 0636 0103 013 0636 0103 010 0636 0103 025 4-10 22 25 8 50 PLIO-PE PG 13,5 0636 0105 013 0636 0105 010 0636 0105 025 5,5-12 24 26 9 50 PLIO-PE PG 16 0636 0107 013 0636 0107 010 0636 0107 025 8,5-14 27 30 10 50 PLIO-PE PG 21 0636 0109 013 0636 0109 010 0636 0109 025 11-18 33 35 11 25 PLIO-PE PG 29 0636 0111 013 0636 0111 010 0636 0111 025 17-25 42 36 11 20 PLIO-PE PG 36 0636 0112 013 0636 0112 010 0636 0112 025 22-33 53 48 15 10 PLIO-PE PG 42 0636 0113 013 0636 0113 010 0636 0113 025 28-38 60 48 15 10 PLIO-PE PG 48 0636 0114 013 0636 0114 010 0636 0114 025 32-44 65 48 15 10 Cable glands metric grey black light grey cable Ø L type 013 010 025 mm mm mm mm PLIO-PE M12 0636 0120 013 0636 0120 010 0636 0120 025 2,5-6,5 15 21 12 100 PLIO-PE M16 0636 0121 013 0636 0121 010 0636 0121 025 4,5-10 19 23 15 50 PLIO-PE M20 0636 0122 013 0636 0122 010 0636 0122 025 7-13 24 26 15 50 PLIO-PE M25 0636 0125 013 0636 0125 010 0636 0125 025 10-17 29 35 15 25 PLIO-PE M32 0636 0127 013 0636 0127 010 0636 0127 025 17-25 42 36 15 20 PLIO-PE M40 0636 0128 013 0636 0128 010 0636 0128 025 22-33 53 48 15 10 PLIO-PE M50 0636 0129 013 0636 0129 010 0636 0129 025 28-38 60 48 15 10 PLIO-PE M63 0636 0130 013 0636 0130 010 0636 0130 025 32-44 65 49 16 10 A8/06-01 A8/07-01 A8/10-01 A8/11-01 A8/1-01 II/11 A8/1-01

Conical cable gland PLIO -PEC PLIO-PEC Colour: grey (RAL 7035) Protection rating: IP 54 Specifications : DIN 46320 EN 50 262 O-ring: PVC Applications: Compact cable gland. The sealing is obtained by deformation of the joint on the conical body. Directly blocked up with a collet chuck. Ø Conical PG cable gland light grey Ø cable Ø type 025 mm mm mm mm PLIO-PEC PG 7 0636 0140 025 100 13 8 15 3,0-6,0 PLIO-PEC PG 9 0636 0141 025 100 16 8 19 4,5-7,0 PLIO-PEC PG 11 0636 0142 025 100 19 8 22 6,0-9,0 PLIO-PEC PG 13,5 0636 0143 025 100 21 9 24 9,0-12,0 PLIO-PEC PG 16 0636 0144 025 100 23 10 27 11,0-14,0 PLIO-PEC PG 21 0636 0145 025 50 29 11 33 14,0-18,0 PLIO-PEC PG 29 0636 0146 025 20 37 11 42 18,0-25,0 PLIO-PEC PG 36 0636 0147 025 10 47 13 53 25,0-32,0 A8/6-01 A8/7-01 A8/10-01 A8/11-01 A8/2-01 XI/04 A8/2-01

Locking plugs with flange PLIO -BC PLIO-BC Colour: grey (RAL 7001) Specifications : DIN 46320 Applications : Locking plugs with flange are used instead of the clamping plug in the case of conical cable glands. They allow a fast and simple closing of unused holes. Locking plugs with flange PG grey d D type 013 mm mm mm PLIO-BC PG 7 0636 0201 013 100 13 9 15 PLIO-BC PG 9 0636 0202 013 100 16 9 19 PLIO-BC PG 11 0636 0203 013 100 19 9 22 PLIO-BC PG 13,5 0636 0204 013 100 21 9 25 PLIO-BC PG 16 0636 0205 013 100 23 9 27 PLIO-BC PG 21 0636 0206 013 50 29 12 33 PLIO-BC PG 29 0636 0207 013 20 37 11 44 PLIO-BC PG 36 0636 0208 013 10 47 15 55 Locking plugs with flange metric grey d D type 013 mm mm mm PLIO-BC M12 0636 0230 013 100 12 10 15 PLIO-BC M16 0636 0231 013 100 16 12 20 PLIO-BC M20 0636 0232 013 100 20 13 24 PLIO-BC M25 0636 0233 013 100 25 15 30 PLIO-BC M32 0636 0234 013 100 32 14 37 PLIO-BC M40 0636 0235 013 50 40 12 46 A8/6-01 V/05 A8/6-01

Protectors PLIO -PT PLIO-PT Colour: black (RAL 9005) D h Applications : Used for a short time protection of holes before cabling. d Protectors PG black h Ø D Ø d type 010 mm mm mm mm PLIO-PT PG 11 0636 0210 010 100 14,5 5,5 13,5 9,8 PLIO-PT PG 13,5 0636 0211 010 100 14,5 8 16 11,8 PLIO-PT PG 16 0636 0212 010 100 19,5 9,5 18,5 13,6 PLIO-PT PG 21 0636 0213 010 50 21,5 10,1 22 17,8 PLIO-PT PG 29 0636 0214 010 20 25 10,2 28,5 25 PLIO-PT PG 36 0636 0215 010 10 27,7 11,2 37,5 31,8 Protectors metric black h Ø D Ø d type 010 mm mm mm mm PLIO-PT M16 0636 0210 010 100 14,5 5,5 13,5 9,8 PLIO-PT M20 0636 0211 010 100 14,5 8 16 11,8 PLIO-PT M25 0636 0213 010 50 21,5 10,1 22 17,8 PLIO-PT M32 0636 0214 010 20 25 10,2 28,5 25 PLIO-PT M40 0636 0215 010 10 27,7 11,2 37,5 31,8 A8/7-01 I/07 A8/7-01

Lock nuts with 30% glass fibre PLIO -CE PLIO-CE Material: PA 6 with 30% glass fibre Colours: grey (RAl 7001), black (RAL 9005) light grey (RAL 7035) Temperature Range: -30 to +80 C permanent Specifications: VDE 0619 D Applications : for the fixing of cable glands. exagonal design with a lip protecting internal surround while tightening. Lock nut PG grey black light grey D type 013 010 025 mm mm PLIO-CE PG 7 0636 0001 013 0636 0001 010 0636 0001 025 50 5 19 PLIO-CE PG 9 0636 0002 013 0636 0002 010 0636 0002 025 50 5 22 PLIO-CE PG 11 0636 0003 013 0636 0003 010 0636 0003 025 50 5 24 PLIO-CE PG 13,5 0636 0004 013 0636 0004 010 0636 0004 025 50 6 27 PLIO-CE PG 16 0636 0005 013 0636 0005 010 0636 0005 025 50 6 30 PLIO-CE PG 21 0636 0006 013 0636 0006 010 0636 0006 025 50 7 36 PLIO-CE PG 29 0636 0007 013 0636 0007 010 0636 0007 025 25 7 46 PLIO-CE PG 36 0636 0008 013 0636 0008 010 0636 0008 025 10 8 60 PLIO-CE PG 42 0636 000 013 0636 000 010 0636 000 025 10 8 65 PLIO-CE PG 48 0636 0010 013 0636 0010 010 0636 0010 025 5 8 70 Lock nut metric grey black light grey D type 013 010 025 mm mm PLIO-CE M12 0636 0020 013 0636 0020 010 0636 0020 025 50 5 18 PLIO-CE M16 0636 0021 013 0636 0021 010 0636 0021 025 50 5 22 PLIO-CE M20 0636 0022 013 0636 0022 010 0636 0022 025 50 6 26 PLIO-CE M25 0636 0023 013 0636 0023 010 0636 0023 025 50 6 32 PLIO-CE M32 0636 0024 013 0636 0024 010 0636 0024 025 25 7 41 PLIO-CE M40 0636 0025 013 0636 0025 010 0636 0025 025 10 7 50 PLIO-CE M50 0636 0026 013 0636 0026 010 0636 0026 025 10 8 60 PLIO-CE M63 0636 0027 013 0636 0027 010 0636 0027 025 5 8 75 A8/10-01 XI/04 A8/10-01

Conical lock nuts with 30% glass fibre PLIO -CEC PLIO-CEC Material: PA 6 ith 30% glass fibre Colour: light grey (RAL 7035) Specifications: VDE 0619 Applications: exagonal lock nut for fixing cable glands. D Conical lock-nut PG light grey type 025 mm mm PLIO-CEC PG 7 0636 0030 025 50 5 19 PLIO-CEC PG 9 0636 0031 025 50 5 22 PLIO-CEC PG 11 0636 0032 025 50 5 24 PLIO-CEC PG 13,5 0636 0033 025 50 6 27 PLIO-CEC PG 16 0636 0034 025 50 6 30 PLIO-CEC PG 21 0636 0035 025 50 7 36 PLIO-CEC PG 29 0636 0036 025 25 7 46 PLIO-CEC PG 36 0636 0037 025 10 8 60 SES_Protection_Cable_Glands_en_0911.pdf elsinki tel. +358 9 540 4940 automation@klinkmann.fi St. Petersburg tel. +7 812 327 3752 klinkmann@klinkmann.spb.ru Moscow tel. +7 495 641 1616 moscow@klinkmann.spb.ru Yekaterinburg tel. +7 343 376 5393 yekaterinburg@klinkmann.spb.ru Samara tel. +7 846 273 95 85 samara@klinkmann.spb.ru Кiev tel. +38 044 495 33 40 klinkmann@klinkmann.kiev.ua Riga tel. +371 6738 1617 klinkmann@klinkmann.lv Vilnius tel. +370 5 215 1646 post@klinkmann.lt Tallinn tel. +372 668 4500 klinkmann.est@klinkmann.ee Мinsk tel. +375 17 200 0876 minsk@klinkmann.com