ROS

Similar documents
Voltage Controlled Oscillator

Features low conversion loss, 22 db typ. high rejection of adjacent harmonics, 58 dbc typ. aqueous washable

Bandpass Filter BPF-E16+ Surface Mount. The Big Deal Low isertion loss (1 db typical) Good VSWR (1.4:1 typical) High rejection Fast roll-off

Applications impedance matching balanced to unbalanced transformation push-pull amplifier. FREQUENCY (MHz) 1 db MHz

line of sight links satellite communications Electrical Specifications (T AMB =-55 C to 100 C) FREQUENCY IP3 (MHz) (dbm) Conversion Loss (db)

Features wideband, 2 to 400 MHz low conversion loss, 1.6 db typ. excellent phase and amplitude unbalance. INSERTION LOSS (db) ±20 ma

NON-CATALOG. Features low conversion loss, 1.6 db typ. excellent amplitude and phase unbalance INSERTION LOSS. (db) ±20 ma. ] M = mid range [10 f L

Features wide bandwidth 10 to 3000 MHz balanced transmission line excellent return loss aqueous washable patent pending

Power Splitter/Combiner

RF Transformer TCM2-672X+ Surface Mount. 50Ω 1700 to 6700 MHz

Bias Tee 50Ω Wideband 10 MHz to 12 GHz

Features miniature package MCLP 3x3 mm specified to 8000 MHz, useable to MHz excellent VSWR, 1:15:1 typ. (db) Flatness

Features wideband, DC to 2500 MHz excellent VSWR, through entire band miniature size, SOT143 package aqueous washable ATTENUATION. (db) Flatness, Max.

Stop Band Rejection Loss F4 - F db F db 1

DPLB-8510A04+ 5 to 1220 MHz (5-85, MHz) The Big Deal Very Low insertion loss, 0.9dB typ. High rejection Very good return loss, 24dB typ.

Features Excellent VSWR, 1.1:1 passband Small size Temperature stable LTCC construction

2 Way-0 Power Splitter/Combiner GP2Y+ Typical Performance Data

2 Way-0 Power Splitter/Combiner GP2S1+ Typical Performance Data

Low Noise Amplifier 5 to 500 MHz

Low Noise Amplifier Electrical Specifications. MAXIMUM POWER (dbm) Input (no damage) Output (1 db Compr.)

Typical Performance Data

Low Noise Amplifier 5 to 500 MHz

VSWR (:1) Frequency (MHz)

Operating Temperature -40 C to +85 C Storage Temperature* -55 C to +100 C RF Power Input** 0.5W at 25 C

Low Noise Amplifier 5 to 1000 MHz

Monolithic Amplifier. DC-6 GHz ERA-2+ Drop-In

Features wideband coverage, DC to 6000 MHz 2 watt rating rugged unibody construction off-the-shelf availability very low cost

Applications biasing amplifiers biasing of laser diodes biasing of active antennas DC return DC blocking test accessory. INSERTION LOSS* (db)

DC to 400 MHz (40 db Typ. Isolation up to 20 GHz)

Features excellent directivity, 32 db typ. excellent mainline loss, 0.65 db typ. rugged shielded case

Switch 50W SPDT Pin Diode, Reflective TTL Driver 10 to 3000 MHz

RF Instrument Amplifier

Electrical Specifications. MAXIMUM POWER OUTPUT (dbm) (db) (dbm)

E-PHEMT GHz. Ultra Low Noise, High Current

Frequency Range MHz. Gain db. Gain Flatness ±0.9 ±1.4 db. Output Power at 1dB compression dbm

Typical Performance Curves

High Power Amplifier ZHL-20W-13+ Coaxial. 50Ω 20W 20 to 1000 MHz

RF Instrument Amplifier

Pulse Amplifier ZPUL-30P. Coaxial. 50Ω Non-Inverting to 700 MHz

Mini Circuits SMA Attenuators

141 SMNB Model Series

086 Model Series. 50Ω DC to 18 GHz. The Big Deal

High Power Amplifier ZHL-100W-272+

Digital Step Attenuator

Digital Controlled Variable Gain Amplifier

REFLECTIONLESS FILTERS

ZHL-4W-422+ Mini-Circuits P.O. Box , Brooklyn, NY (718)

Digital Step Attenuator

Digital Step Attenuator

REFLECTIONLESS FILTERS

Monolithic Amplifier CMA-83LN+ Low Noise, Wideband, High IP3. 50Ω 0.5 to 8.0 GHz

REFLECTIONLESS FILTERS

REFLECTIONLESS FILTERS

Monolithic Amplifier CMA-84+ Wideband, High Dynamic Range, Ceramic. DC to 7 GHz. The Big Deal

REFLECTIONLESS FILTERS

REFLECTIONLESS FILTERS

Monolithic Amplifier CMA-103+ Ultra Linear Low Noise, Ceramic to 4 GHz

Monolithic Amplifier CMA-162LN+ Ultra Low Noise, High IP to 1.6 GHz

Monolithic Amplifier CMA-81+ Wideband, High Dynamic Range, Ceramic. DC to 6 GHz. The Big Deal

REFLECTIONLESS FILTERS

Voltage Variable Equalizer

Monolithic Amplifier MNA-6W+ High Directivity. 0.5 to 5.5 GHz

Dual Matched MMIC Amplifier

Monolithic Amplifier MNA-2A+ High Directivity. 0.5 to 2.5 GHz

Broadband covering primary wireless communications bands: Cellular, PCS, LTE, WiMAX in a single amplifier.

Monolithic Amplifier MNA-5A+ High Directivity. 0.5 to 2.5 GHz

Features. = +25 C, Vcc = +5V. Parameter Min. Typ. Max. Units Frequency Range GHz Power Output 3 dbm SSB Phase 10 khz Offset -60 dbc/hz

TGV2561-SM GHz VCO with Divide by 2

SPDT RF Switch RF Switch with internal driver Single Supply Voltage, +2.3V to +5.5V

Monolithic Amplifier PMA4-33GLN+ Low Noise, High Gain & IP3. 50Ω 0.7 to 3.0 GHz. The Big Deal

Monolithic Amplifier PHA-202+ Ultra High Dynamic Range to 2.7 GHz. The Big Deal

SPDT RF Switch JSW2-63VHDRP+

Useful in wideband systems or in in several narrowband systems. Reducing inventory

Monolithic Amplifier PHA-13HLN+ Ultra High Dynamic Range. 1MHz to 1 GHz. The Big Deal

Monolithic Amplifier LHA-1H+ Ultra High Dynamic Range to 6 GHz

Monolithic Amplifier EHA-163L+ Low Current, Wideband, Flat Gain. 50Ω DC to 16 GHz. The Big Deal

Characterization of SPDT RF Switch (Mini-circuits MSP2TA )

Monolithic Amplifier Die 5 to 22 GHz

Gain Equalizers EQY-SERIES. Microwave. The Big Deal

Features. = +25 C, Vcc = +5V

Dual Matched MMIC Amplifier

NON-CATALOG Frequency Synthesizer

SP4T RF Switch HSWA4-63DR+

Features. = +25 C, Vcc = +5V [1]

No need for external driver, saving PCB space and cost.

Digital Step Attenuator

SPDT RF Switch MSWA2-50+ Fast Switching - MMIC. The Big Deal

Useful in wideband systems or in in several narrowband systems. Reducing inventory. Extremely High Reliability improving overall system reliability

Digital Step Attenuator

HMC6380LC4B. WIDEBAND VCOs - SMT. Electrical Specifications, T A. Typical Applications. Features. General Description. Functional Diagram

Digital Step Attenuator

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Monolithic Amplifier TSY-13LNB+ Wideband. 50Ω 0.03 to 1 GHz. The Big Deal

Digital Step Attenuator

Frequency Synthesizer

Digital Step Attenuator

Frequency Synthesizer

Monolithic Amplifier PMA2-33LN+ Ultra Low Noise, High IP3. 50Ω 0.4 to 3.0 GHz. The Big Deal

No need for external driver, saving PCB space and cost.

Dynamic Engineers Inc.

Transcription:

Surface Mount 5V Tuning for PLL IC s 1630 to 1660 MHz Features low pulling wireless communications radio & radar astronomy CASE STYLE: CK605 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications MODEL FREQ. POWER PHASE NOISE TUNING NON HARMONICS PULLING PUSHING DC NO. (MHz) OUTPUT HARMONIC (dbc) pk-pk (MHz/V) OPERATING (dbm) VOLTAGE SENSI- PORT 3 db SPURIOUS @12 dbr POWER RANGE TIVITY CAP MODULATION (dbc) (MHz) Typ. (V) (MHz/V) (pf) BANDWIDTH Vcc Current (MHz) (ma) Min. Max. Typ. 1 10 100 1000 Min. Max. Typ. Typ. Typ. Typ. Typ. Max. Typ. Typ. Max. 1630 1660 +0.5-83 -107-127 -147 0.5 4.5 33 20 180-90 -19-10 0.8 1 5 30 RF OUT 10 VCC 14 V-TUNE 2 GROUND 1,3,4,5,6,7,8,9,11,12,13,15,16 Outline Drawing Maximum Ratings Operating Temperature -55 C to 85 C Storage Temperature -55 C to 100 C Absolute Max. Supply Voltage (Vcc) 7.0V Absolute Max. Tuning Voltage (Vtune) 6.5V Demo Board MCL P/N: TB-10 Suggested PCB Layout (PL-012) Suggested Layout, METALLIZATION SOLDER RESIST inch mm A B C D E F G H J K L M N P Q R S T wt..500.500.180.100.080.115.060.040.540.060.100.135.135.115.140.070.150.070 grams 12.70 12.70 4.57 2.54 2.03 2.92 1.52 2 13.72 1.52 2.54 3.43 3.43 2.92 3.56 1.78 3.81 1.78 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms ); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at www.minicircuits.com/mclstore/terms.jsp Mini-Circuits www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com REV. A M151108 EDR-7140/1F1 RAV 150514 Page 1 of 2

Performance Data & Curves* V TUNE FREQUENCY POWER OUTPUT Icc HARMONICS (dbc) FREQ. FREQ. PHASE NOISE (dbc/hz) FREQ PHASE TUNE SENS (MHz) (dbm) (ma) PUSH PULL OFFSET NOISE at (MHz/V) (MHz/V) (MHz) (khz) 1648 MHz -55 C +25 C +85 C -55 C +25 C +85 C F2 F3 F4 1kHz 10kHz 100kHz 1MHz (dbc/hz) 0.00 33.62 1585.2 1581.3 1578.4 0.97 0.24-0.68 20.45-16.4-30.1-46.2 0.51 0.17-8 -106.7-126.9-146.3-82.23 0.25 31.80 1593.5 1589.7 1586.7 8 0.34-0.51 20.50-16.6-29.4-45.0 0.61 0.19-84.8-106.8-127.3-146.9 2.0-91.26 0.50 31.23 1601.5 1597.7 1594.5 9 0.37-0.42 20.52-16.9-28.8-43.0 0.70 0.39-84.1-106.9-127.7-147.1 3.5-96.96 0.75 39 1609.4 1605.5 1602.1 1.11 0.39-0.35 20.52-17.2-28.4-41.8 0.78 0.57-82.9-107.1-127.6-147.3 6.0-102.68 0 30.47 1617.2 1613.3 1609.6 1.11 0.43-0.27 20.55-17.6-28.0-40.5 0.81 0.67-83.3-107.5-127.7-147.0 8.4-105.48 1.25 30 1625.0 1620.9 1617.0 8 0.45-0.17 20.56-18.0-28.1-39.8 0.89 0.77-80.7-107.2-127.5-147.0 10.0-107.10 1.50 31.60 1632.9 1628.6 1624.5 4 0.46-0.10 20.58-18.3-27.7-39.0 0.92 0.84-82.3-107.0-127.4-147.2 23.2-114.74 1.75 32.36 164 1636.5 1632.1 1 0.49-0.01 20.59-18.8-27.8-38.2 0.96 0.86-82.7-107.0-127.8-146.9 32.5-117.74 2.00 32.95 1649.4 1644.6 1639.8 0 0.53 0.08 20.60-19.2-27.8-37.9 0 0.83-82.9-106.9-127.6-147.1 53.6-121.43 2.25 33.44 1657.8 1652.9 1647.8 0.96 0.58 0.18 20.62-19.7-27.7-37.1 3 0.70-82.2-107.0-127.6-147.3 75.3-124.89 2.50 34.14 1666.4 1661.2 1655.9 0.93 0.60 0.24 20.64-20.2-27.5-37.2 4 0.48-83.9-107.4-127.9-147.2 100.0-127.65 2.75 34.96 1675.2 1669.8 1664.1 0.90 0.61 0.31 20.66-20.7-27.6-36.5 6 0.20-82.5-107.4-127.8-147.0 177.4-132.71 3.00 35.40 1684.3 1678.5 1672.5 0.92 0.67 0.38 20.69-21.2-27.5-36.5 6 0.26-82.6-107.4-127.7-147.0 208.3-133.91 3.25 35.43 1693.3 1687.4 1681.1 1 0.78 0.51 20.72-21.8-27.4-36.2 7 0.63-82.9-107.1-127.9-146.9 292.4-136.55 3.50 35.66 1702.4 1696.2 1689.7 1.14 0.96 0.69 20.76-22.5-27.8-36.5 3 0.97-83.3-107.3-127.9-147.2 349.6-138.23 3.75 35.80 1711.5 1705.1 1698.4 1.21 1.10 0.88 20.79-23.1-27.9-36.1 0 1.21-82.5-107.4-127.9-147.0 410.5-139.59 4.00 35.78 1720.7 1714.1 1707.1 1.27 1.18 0.99 20.82-23.6-28.0-36.4 0.97 1.33-83.8-107.2-127.9-146.9 576.3-142.94 4.25 35.38 1729.8 1723.0 1715.8 1.34 1.24 7 20.85-24.1-28.0-36.3 0.95 1.31-81.7-107.8-127.6-146.8 809.1-145.64 4.50 35.04 1738.8 1731.9 1724.5 1.47 1.40 1.21 20.89-24.6-28.0-36.6 0.91 1.11-81.5-107.0-127.6-146.9 1000.0-147.11 *at 25 o Frequency (MHz) 1770 1730 1690 1650 1610 1570 Frequency and Tuning Sensitivity FREQ. @ -55 C FREQ. @ +25 C FREQ. @ +85 C T.SENS @ +25 C 0.0 0.5 1.5 2.0 2.5 3.0 3.5 4.0 4.5 45 40 35 30 25 20 Tuning Sensitivity (MHz/V) Output Power (dbm) 2.0 1.5 0.5 0.0-0.5 - Power Output -55 C +25 C +85 C 0.0 0.5 1.5 2.0 2.5 3.0 3.5 4.0 4.5 Harmonics (dbc) 0-10 -20-30 -40-50 Harmonics Level F2 F3 F4 0.0 0.5 1.5 2.0 2.5 3.0 3.5 4.0 4.5 Pulling (MHz) 1.4 1.2 0.8 0.6 0.4 Frequency Pulling & Pushing (Vcc ± 5%) Pulling Pushing 1.4 1.2 0.8 0.6 0.4 Pushing (MHz/V) Phase Noise (dbc/hz) -75-85 -95-105 -115-125 -135 Phase Noise Vs. Tuning Voltage 1KHz 10KHz 100KHz 1MHz Phase Noise (dbc/hz) -75-85 -95-105 -115-125 -135 Phase Noise 0.2 0.2-145 -145 0.0 0.0 0.5 1.5 2.0 2.5 3.0 3.5 4.0 4.5 0.0-155 0.0 0.5 1.5 2.0 2.5 3.0 3.5 4.0 4.5-155 1 10 100 1000 Frequency Offset (KHz) Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms ); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at www.minicircuits.com/mclstore/terms.jsp Mini-Circuits www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 2 of 2

Voltage Controlled Oscillator Typical Performance Data V TUNE FREQUENCY POWER OUTPUT HARMONICS FREQ. FREQ PHASE TUNE SENS (MHz) (dbm) (dbc) PUSH OFFSET NOISE (MHz/V) (MHz/V) (KHz) (dbc/hz) -55ºC +25ºC +85ºC -55ºC +25ºC +85ºC F2 F3 F4 0.00 33.62 1585.2 1581.3 1578.4 0.97 0.24-0.68-16.4-30.1-46.2 0.51 1-82 0.25 31.80 1593.5 1589.7 1586.7 8 0.34-0.51-16.6-29.4-45.0 0.61 10-107 0.50 31.23 1601.5 1597.7 1594.5 9 0.37-0.42-16.9-28.8-43.0 0.70 100-128 0.75 39 1609.4 1605.5 1602.1 1.11 0.39-0.35-17.2-28.4-41.8 0.78 1000-147 0 30.47 1617.2 1613.3 1609.6 1.11 0.43-0.27-17.6-28.0-40.5 0.81 1.25 30 1625.0 1620.9 1617.0 8 0.45-0.17-18.0-28.1-39.8 0.89 1.50 31.60 1632.9 1628.6 1624.5 4 0.46-0.10-18.3-27.7-39.0 0.92 1.75 32.36 164 1636.5 1632.1 1 0.49-0.01-18.8-27.8-38.2 0.96 2.00 32.95 1649.4 1644.6 1639.8 0 0.53 0.08-19.2-27.8-37.9 0 2.25 33.44 1657.8 1652.9 1647.8 0.96 0.58 0.18-19.7-27.7-37.1 3 2.50 34.14 1666.4 1661.2 1655.9 0.93 0.60 0.24-20.2-27.5-37.2 4 2.75 34.96 1675.2 1669.8 1664.1 0.90 0.61 0.31-20.7-27.6-36.5 6 3.00 35.40 1684.3 1678.5 1672.5 0.92 0.67 0.38-21.2-27.5-36.5 6 3.25 35.43 1693.3 1687.4 1681.1 1 0.78 0.51-21.8-27.4-36.2 7 3.50 35.66 1702.4 1696.2 1689.7 1.14 0.96 0.69-22.5-27.8-36.5 3 3.75 35.80 1711.5 1705.1 1698.4 1.21 1.10 0.88-23.1-27.9-36.1 0 4.00 35.78 1720.7 1714.1 1707.1 1.27 1.18 0.99-23.6-28.0-36.4 0.97 4.25 35.38 1729.8 1723.0 1715.8 1.34 1.24 7-24.1-28.0-36.3 0.95 4.50 35.04 1738.8 1731.9 1724.5 1.47 1.40 1.21-24.6-28.0-36.6 0.91 4.75 34.71 1747.7 1740.6 1733.1 1.58 1.52 1.34-25.0-28.4-36.9 0.90 5.00 34.14 1756.5 1749.3 1741.6 1.72 1.66 1.48-25.5-28.3-37.2 0.89 5.25 33.38 1765.2 1757.8 1749.9 1.85 1.79 1.61-25.9-28.5-37.8 0.89 5.50 32.72 1773.6 1766.2 1758.2 2.00 1.95 1.77-26.3-29.0-38.7 0.89 5.75 32.15 1782.0 1774.4 1766.2 2.11 2.08 1.92-26.8-28.7-39.3 0.91 6.00 32.15 1790.1 1782.4 1774.1 2.21 2.20 2.03-27.3-29.2-40.5 0.94 REV. X1 071210 Page 1 of 1

Voltage Controlled Oscillator Typical Performance Data Frequency and Tuning Sensitivity Power Output 2000 40 6 Frequency (MHz) 1950 1900 1850 1800 1750 1700 1650 1600 FREQ. @ -55 C FREQ. @ +25 C FREQ. @ +85 C T.SENS @ +25 C 39 38 37 36 35 34 33 32 Tuning Sensitivity (MHz/V) Output Power (dbm) 5 4 3 2 1 0-1 -2-55 C +25 C +85 C 1550 31-3 1500 30 0.0 0.5 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0-4 0.0 0.5 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 Harmonics Level Frequency Pushing 0 1.4-10 1.3 Pushing @ +25 C -20 1.2 Harmonics (dbc) -30-40 -50-60 Pushing (MHz/V) 1.1 0.9 0.8-70 -80-90 F2 @ +25 C F3 @ +25 C F4 @ +25 C 0.7 0.6 0.5-100 0.0 0.5 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 0.4 0.0 0.5 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0-60 -70 Phase Noise Phase Noise @ +25 C Phase Noise (dbc/hz) -80-90 -100-110 -120-130 -140-150 -160 1 10 100 1000 Frequency Offset (khz) REV. X1 071210 Page 1 of 1

Case Style Outline Dimensions PCB Land Pattern CK CK605 Suggested Layout, Tolerance to be within.002 CASE # A B C D E F G H J K.500.500.180.100.080.115.060.040.540.060 CK605 (12.70) (12.70) (4.57) (2.54) (2.03) (2.92) (1.52) (2) (13.72) (1.52) CASE # L M N P Q R S T WT. GRAM.100.135.135.115.140.070.150.070 CK605 (2.54) (3.43) (3.43) (2.92) (3.56) (1.78) (3.81) (1.78) Dimensions are in inches (mm). Tolerances: 2 Pl. +.03; 3Pl..015 Notes: 1. Case material: Nickel-Silver alloy. 2. Base: Printed wiring laminate. 3. Termination finish: For RoHS Case Styles: 3-5 µ inch (.08-.13 microns) Gold over 120-240 µ inch (3.05-6.10 microns) Nickel plate. All models, (+) suffix. 98-CK Rev.: W (10/17/17) M163961 File: 98-CK Sheet 1 of 13 This document and its contents are the property of Mini-Circuits

Tape & Reel Packaging TR-F37 Tape Width, mm Device Cavity Pitch, mm 24 16 Reel Size, inches 7 Devices per Reel Small quantity standards (see note) 13 Standard 10 20 50 100 200 500 Note: Please consult individual model data sheet to determine device per reel availability. Mini-Circuits carrier tape materials provide protection from ESD (Electro-Static Discharge) during handling and transportation. Tapes are static dissipative and comply with industry standards EIA-481/EIA-541. Go to: www.minicircuits.com/pages/pdfs/tape.pdf 98-TR-F37 Rev.: C (01/17/18) M164706 File: 98-TR-F37.docx Sheet 1 of 1 This document and its contents are the property of Mini-Circuits.

Mini-Circuits Environmental Specifications ENV65 All Mini-Circuits products are manufactured under exacting quality assurance and control standards, and are capable of meeting published specifications after being subjected to any or all of the following physical and environmental test. Specification Test/Inspection Condition Reference/Spec Operating Temperature -55 to 85 C Ambient Environment Individual Model Data Sheet Storage Temperature -55 to 100 C Ambient Environment Individual Model Data Sheet Humidity 90 to 95% RH, 240 hours, 50 C MIL-STD-202, Method 103, Condition A, Except 50 C and end-point electrical test done within 12 hours Thermal Shock -55 to 100 C, 100 cycles MIL-STD-202, Method 107, Condition A-3, except +100 C Solder Reflow Heat Sn-Pb Eutectic Process: 225 C peak Pb-Free Process, 245 C peak J-STD-020, Table 4-1, 4-2 and 5-2, Figure 5-1 Solderability 10X Magnification J-STD-002, Para 4.2.5, Test S, 95% Coverage Vibration (High Frequency) 20g peak, 20-2000 Hz, 4 times in each of three axes (total 12) MIL-STD-883, Method 2007.3, Condition A Mechanical Shock 50g, 11 ms, 1/2-sine, 18 shocks: 3 each direction, each of 3 axes MIL-STD-202, Method 213, Condition A Marking Resistance to Solvents Isopropyl alcohol + mineral spirits at 25 C; terpene defluxer at 25 C; distilled water + proylene glycol monomethyl ether + monoethanolamine at 63 C to 70 C MIL-STD-202, Method 215 ENV65 Rev: OR 03/20/12 M136382 File: ENV65.pdf This document and its contents are the property of Mini-Circuits. Page: 1