EX-421 Evacuated Miniature Crystal Oscillator

Similar documents
Performance Specifications

TX-707 Low g-sensitivity Temperature Compensated Crystal Oscillator

PX-421 Crystal Oscillator

TX-500 Temperature Compensated Crystal Oscillator

Performance Specifications

MX-600 Microprocessor Controlled Crystal Oscillator High Precision

TX-705 Temperature Compensated Crystal Oscillator

Performance Specifications

OX-171 Oven Controlled Crystal Oscillator

OX-200 Oven Controlled Crystal Oscillator

TX-700 Temperature Compensated Crystal Oscillator

MX-503 Microprocessor Controlled Crystal Oscillator High Precision

OX-175 Ultra Low Noise Oven Controlled Crystal Oscillator

TX-801 Temperature Compensated Crystal Oscillator

VX-505 Voltage Controlled Crystal Oscillator Extended Temperature

VX-706 Voltage Controlled Crystal Oscillator

VX-990 Voltage Controlled Crystal Oscillator Ultra Low Noise and G-Sensitivity

PX-990 Crystal Oscillator Ultra Low Noise and G-Sensitivity

VX-701 Voltage Controlled Crystal Oscillator

VS-504 Dual Frequency VCSO High Frequency

PS-701 SAW Oscillator

VS-507 Voltage Controlled SAW Oscillator

VX-500 Voltage Controlled Crystal Oscillator

Performance Specifications. Parameter Min Typ Max Units Condition. ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm

OX-221 Oven Controlled Crystal Oscillator

PX-422 Hybrid TTL Clock Oscillator

Performance Specifications. Frequency Stabilities Supply Voltage (Vs) ma ma. RF Output

MD-403 I2C InterfaceOven Controlled Crystal Oscillator

VX-503 Voltage Controlled Crystal Oscillator

OX-204 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator

VT-800 Temperature Compensated Crystal Oscillator Previous Vectron Model VTC4

PX-570 High Temperature Crystal Oscillator

HT RTCXO High Temperature Low Power Real Time Clock Crystal Oscillators

PX-702 PX-570 PX-420

OX-304 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator

OX-175 Ultra Low Noise Oven Controlled Crystal Oscillator

C

VT-860 Temperature Compensated Crystal Oscillator

Typical Applications Satellite and Deep Space Radiation Tolerance Required Severe Environmental Conditions. 10 MHz 40 MHz 10, 20 MHz

C MHz 52 MHz

MX-041 Oven Controlled Crystal Oscillator

OX-046 VHF low g-sensitivity Oven Controlled Crystal Oscillator

OX-043 Low g-sensitivity Oven Controlled Crystal Oscillator

MD-173 High Stability Coefficient Oscillator I C interface Oven Controlled Crystal Oscillator

VT-701 Temperature Compensated Crystal Oscillator Previous Vectron Model VTC2

VT-501 Temperature Compensated Crystal Oscillator Previous Vectron Model VTD3

VTC4 series Voltage Controlled Temperature Compensated Crystal Oscillator

MHz. Performance Specifications

VC-820 CMOS Crystal Oscillator

MX-503 High Precision Microprocessor Controlled Crystal Oscillator

Performance Specifications. Frequency Stabilities 1 ( 10 & 20 MHz)

VTC2 Series Voltage Controlled Temperature Compensated Crystal Oscillator

Performance Specifications. Frequency Stabilities 1 ( MHz) -20 to +70 C -40 to +85 C -40 to +95 C Residual error compare to fit curve

VC-827 Differential (LVPECL, LVDS) Crystal Oscillator

VX-805 Voltage Controlled Crystal Oscillator

OX-400 / OX 401 Oven Controlled Crystal Oscillator

VC-711 Differential (LVPECL, LVDS) Crystal Oscillator

VVC1 VVC2 Voltage Controlled Crystal Oscillator

VS-800 Ultra-Low Jitter High Frequency VCSO

Typical Applications Base Stations Test Equipment Synthesizers. Frequency stabilities 1 [Standard]

VS-701 High Shock Discrete Voltage Controlled SAW Oscillator

Description. Block Diagram. Complementary Output. Output. Crystal. Oscillator. E/D or NC

VV-701 Voltage Controlled Crystal Oscillator Previous Vectron Model VVC1/VVC2

OD100LP-Series Low Phase Noise

C5310. Tight Stability. 1 MHz 700 MHz

VCC M CMOS Crystal Oscillator

VC-801 CMOS Crystal Oscillator Previous Vectron Model VCC4

VS-708 Single Frequency VCSO

VCC6-L/V 2.5 or 3.3 volt LVDS Oscillator

MD-261 MD-261. Features. Applications. Block Diagram. GNSS (GPS and GLONASS) Disciplined Oscillator Module

RFPT Specifications. SMD Low Acceleration Sensitivity TCXO / TCVCXO. Product description. Applications

Block Diagram. Figure 1. Functional Block Diagram

Note. Figure1. The Temperature Stability ranges of various oscillator types

VX-705 Voltage Controlled Crystal Oscillator

O-CDFEXYZXX-X-X-10MHz/100MHz Precision Ultra Low Phase Noise Dual Frequency OCXO Reference Module (DFRM)

Specification AXIOM210 Rev.: 3 Date: Oscillator type: Ultra-Low Phase Noise OCXO in Vibration-isolated Package

Additional parameters Parameter Min Typ Max. Units Condition Weight 1 g

PARAMETER SYMBOL CONDITIONS VALUE UNIT

HT-MM900A Military Temperature Oscillator

VC-708 VC-708. LVPECL, LVDS Crystal Oscillator Data Sheet Ultra Low Phase Noise. Description

Low Power (na Current Consumption) KHz ME831, ME832, ME833, ME834 Series

VX-703 Data Sheet VX-703. Voltage Controlled Crystal Oscillator Previous Vectron Model V-Type. Description. Features. Applications.

VS-751 VS-751. Dual Frequency VCSO. Description. Features. Applications. Block Diagram. Vcc COutput Output SAW 1 SAW 2. Vc FS Gnd

OX-249 Space Qualified Oven Controlled Crystal Oscillator (OCXO)

2.0 FREQUENCY CHARACTERISTICS Line Parameter Test Condition Value Unit 2.1 Nominal frequency range

Dynamic Engineers Inc.

MV-9300A 1-80 MHz High Performance VCXO

O C X O Oven Controlled Crystal Oscillators

STRATUM 3E High Stability Oven Stabilized Oscillator OH300 Series OCXO / VCOCXO

Description. Block Diagrams. Figure 1b. Crystal-Based Multiplier w/saw

VCC6-Q/R Series 2.5 and 3.3 volt LVPECL Crystal Oscillator

VCC4 series 1.8, 2.5, 3.3, 5.0 volt CMOS Oscillator

O-CS22-HH-0XYZXX-X-X-X-X Series Precision Ultra Low Phase Noise OCXO in Low Profile 22x25x10 mm SMD package

Reflow Process Compatible Low Phase Noise Build in PLL-Circuit

Description. Block Diagram LD (10) VMON (5) Phase Detector & LD (9) FIN 4 CFOUT 1 GND (3, 7, 11, 12) Figure 1. Functional block diagram

O-CXM-XXYZXX-X-X-XX-X Precision Ultra Low Phase Noise OCXO in 36x27 mm Europack with optional Adapter to 2 x2

VSS4 series 3.3 Volt Spread Spectrum CMOS Oscillator

Description. Block Diagram. Complementary Output. Output. Crystal. Oscillator E/D

CMOS, Ultra-low Jitter Voltage Controlled Crystal Oscillators (VCXOs)

VT-841 VT-841. Temperature Compensated Crystal Oscillator. Description. Applications. Features. Block Diagram. Output V DD.

Transcription:

EX-421 Evacuated Miniature Crystal Oscillator EX-421 Description The EX-421 provides exceptionally low aging rates and tight temperature stabilities in an extremely small package over a wide range of environmental conditions. This EMXO series bridges the gap between current large, high precision OCXO s and smaller TCXO s. The EX-421 Series becomes the most economical choice where there is a need for spectral purity, short and long term stability, along with small size and dramatically reduced power consumption. Features Applications Low Power Consumption Precision Oscillator Fast Warm-up Low Phase Noise Good Aging Small Form Factor SMD and Thru-Hole Mounting Option RoHS Compliant Standard Frequencies: 10MHz, 20MHz and 100MHz Design/Material Sourcing/Manufacture/Test in MHS,PA COO:USA No ITAR Restriction for importing EAR99 Previous Model Number: EX-620, EX-420 series Mobile Data Communications Military Portable Radio Satellite Communications Airborne Equipment Avionics Instrumentation Marine/Land Seismic Performance Specifications Frequency Stabilities1 Max Units Condition vs. operating temperature range (See temperature & stability table) Parameter ±10 ±20 ±30 0 0 C -20 +70 C -40 +85 C vs. aging / day (See aging table) vs. aging / per year vs. aging / 10 years ±1.0 ±100 ±1 ppm after 30 days of operation +0.2 ppm at time of shipment VS ± 5% Load ± 5% 45 60 sec. sec. to ± 1 ppm of final frequency (1 hour) to ± 100 of final frequency (1 hour) Initial Accuracy vs. supply voltage change vs. load change Min Typ -0.2-5 -5 Warm-up Time Supply Voltage (Vs) Supply voltage (Standard) 4.75 5.0 5.25 Supply voltage (Option) 3.14 3.3 3.46 1.5 0.25 0.30 Power Consumption during warm-up steady state @ +25 C / 3.3 Vdc steady state @ +25 C / 5.0 Vdc 267 Lowell Road, Unit 102, Hudson, NH 03051 Tel: 1-88-VECTRON-1 http://www.vectron.com 1 of 5

Performance Specifications Signal [Standard] Parameter Min Typ Max Units Condition HCMOS Load 15 pf Signal Level (Vol) 0.1 Vs Signal Level (Voh) Duty cycle 45 55 % Signal [Standard] Load 50 ohm Output Power [Standard] Output Power [Option] Output Power [Option] 0.8 Vs Vs = 3.3 Vdc 0.8 Vs Vs = 5.0 Vdc Rise \ Fall Time 5 ns 10MHz to 29.999MHz, (10 % - 80 %) Rise \ Fall Time 3 ns 30MHz to 100MHz, (10 % - 80 %) 0 +3 Sinewave +4 +7 +9 Harmonics -30 dbc Reference Voltage (Vref) Tuning Range Tuning Slope 2.7 4.2 Frequency Tuning (EFC) 2.9 4.4 See tuning range table Positive Tuning Voltage 0 +Vref Phase Noise (10 MHz) Phase Noise (100 MHz) Additional Parameters -90-125 -145-160 -165-95 -125-150 -160-165 Vs = 3.3 Vdc Vs = 5.0 Vdc 1 Hz 10 Hz 100 Hz 1 KHz 10 KHz Allan Deviation (10 MHz) 0.02 Tau = 1 sec Acceleration Sensitivity 1.0 /g Total Gamma Weight 5 grams Absolute Maximum Ratings Supply Voltage 5.5 Output Load 50 pf Operable temperature range -55 +85 C Storage temperature range -55 +85 C 10 Hz 100 Hz 1 KHz 10 KHz 100 KHz Vibration Sine Vibration Random Standard Environmentals MIL-STD-202, Method 204, Condition G (30g peak, 10Hz-2000Hz) MIL-STD-202, Method 214, Condition I-H (30g RMS, 10Hz-2000Hz) Shock MIL-STD-202, Method 213, Condition E (1000 g, 0.5ms, 1/2 sine) Solderability MIL-STD-883, Method 2003 267 Lowell Road, Unit 102, Hudson, NH 03051 Tel: 1-88-VECTRON-1 http://www.vectron.com 2 of 5

Outline Drawing / Enclosure Surface Mounture ure Thru-hole LABEL LABEL [11.43] MAX [13.46] MAX.450 MAX.530 MAX [13.46] MAX.530 MAX [11.43. MAX.450 MAX 45 METAL TAB AND DOT INDICATE PIN 1 [0.64] MAX 0.025 MAX (ALL 4 SIDES) METAL TAB AND DOT INDICATE PIN 1 [.64] MAX.025 MAX (ALL 4 SIDES) [9.80] MAX.385 MAX 6.60.260 [9.40] MAX.370 MAX [6.60].260 REF 1.73.068 1.73.068 2.54.100 1 2 4 8 5 12.70±0.508.500±.020 0.51 R.020 12.70±0.254.500±.010 Pin Connections Pin EFC OPTIONS FIX FREQ. OPTIONS 1 EFC Input No Connection 2 Vref Output No Connection 4 Ground (Case) Ground (Case) 5 RF Output RF Output 8 Supply Voltage Input Supply Voltage Input 3.72±0.254.146±.010 0.51.020 1.14.045 (5X) 2.54.100 1 8 2 4 12.70±0.508.500±.020 5 0.46.018 12.70±0.254.500±.010 Standard Shipping Method (surface mount) Hi Janice, We can offer MOQ of 10+pcs with our 25+pcs pricing, under Standard USD price list. Please quote and Jake will approve the MOQ and price. Thanks,John Standard Shipping Method (thru-hole) 3 of 5

Recommended Reflow Profiles for Pb-Free & Sn-Pb T p tp Critical Zone T L to T p T L Ts Ramp up t L Ramp dow n Temperature Ts ts preheat 25 t 25 C to peak Time 230 C Reflow Profile Profile Feature Sn-Pb Assembly Profile Feature Sn-Pb Assembly Average ramp-up rate (TL to TP) 3 C/seconds max. Time 25 C to Peak Temperature 4 minutes max. Preheat - Temperature min Tsmin 135 C Time maintained above - Temperature Min Tsmax 155 C - Temperature (TL) 183 C - Time (min to max) (ts) 60-90 seconds - Time (tl) 45-60 seconds Tsmax to TL -Ramp-up Rate 3 C/seconds max. Time maintained above - Temperature (TL) 183 C Time within 5 C of actual 10-20 seconds max. - Time (TL) 40-60 seconds Peak Temperature (tp) Peak Temperature (Tp) max 230 C Ramp-down Rate 6 C/seconds max. Note: All temperatures refer to topside of the package, measured on the package body surface. 260 C Reflow Profile Profile Feature Pb-Free Assembly Profile Feature Pb-Free Assembly Average ramp-up rate (TL to TP) 3 C/seconds max. Time 25 C to Peak Temperature 8 minutes max. Preheat - Temperature min Tsmin 150 C Time maintained above - Temperature min Tsmax 200 C - Temperature (TL) 217 C - Time (min to max) (ts) 60-180 seconds - Time (tl) 60-150 seconds Tsmax to TL -Ramp-up Rate 3 C/seconds max. Time maintained above - Temperature (TL) 217 C Time within 5 C of actual 20-40 seconds max. - Time (TL) 60-150 seconds Peak Temperature (tp) Peak Temperature (Tp) max 260 C Ramp-down Rate 6 C/seconds max. Note: All temperatures refer to topside of the package, measured on the package body surface. 267 Lowell Road, Unit 102, Hudson, NH 03051 Tel: 1-88-VECTRON-1 http://www.vectron.com 4 of 5

Ordering Information EX - 421 0 - D A P - 108 0-10M0000000 Product Family EX: EMXO Package 13x 13mm Configuration 0: Surface Mount 1: Thru-hole Supply Voltage D: 5 Vdc E: 3.3 Vdc RF Output Code A: HCMOS E: Sinewave Stability Code 108: ±10 208: ±20 308: ±30 508: ±50 758: ±75 107: ±100 Temperature Range A: -55 C to +85 C E: -40 C to +85 C J: -20 C to +70 C P: 0 C to 0 C Frequency Frequency Control 0: Fixed Frequency (HCMOS) 1: Fixed Frequency (0 ) 2: Fixed Frequency (+3 ) 3: Electrical Tuning (HCMOS) 4: Electrical Tuning (0 ) 5: Electrical Tuning (+3 ) 6: Fixed Frequency ( ) 7: Electrical Tuning ( ) Temperature Range and Stability Table ( Temperature Stability Reference to (Fmax-Fmin)/2 ) Stability/Temperature A: -55 C to +85 C E: -40 C to +85 C J: -20 C to +70 C P: 0 C to 0 C 108 (+/-10) 10-20MHz 208 (+/-20) 10-20MHz 10-20MHz 308 (+/-30) 10-20MHz 10-20MHz 10-20MHz 10-20MHz 508 (+/-50) 10-50MHz 10-50MHz 10-50MHz 10-50MHz 758 (+/-75) 10-80MHz 10-100MHz 10-100MHz 10-100MHz 107 (+/-100) 10-100MHz Frequency Range (+/-10) 10-30MHz 208 (+/-20) frequencies. 10-30MHz 10-30MHz 308 (+/-30) Aging Table Daily Rate (/day) Yearly Rate (/year) Tuning Range (ppm) 10MHz to 15MHz ± 1 ± 100 ± 1 >15MHz to 100MHz ± 2 ± 200 ± 2 Notes: 1. Contact factory for improved stabilities or additional product options. Not all options and codes are available at all 2. Unless other stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25 C). 3. Phase noise degrades with increasing output frequency. 4. Subject to technical modification. 5. Contact factory for availability. For Additional Information, Please Contact USA: 267 Lowell Road, Unit 102 Hudson, NH 03051 Tel: 1.888.328.7661 Fax: 1.888.329.8328 Europe: Landstrasse, D-74924 Neckarbischofsheim, Germany Tel: +49 (0) 3328.4784.17 Fax: +49 (0) 3328.4784.30 Asia: 68 Yin Cheng Road(C), 22nd Floor One LuJiaZui Pudog, Shanghai 200120, China Tel: 86.21.6194.6886 Fax: 86.21.6194.6699 Disclaimer reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. 267 Lowell Road, Unit 102, Hudson, NH 03051 Tel: 1-88-VECTRON-1 http://www.vectron.com 5 of 5 Rev: 11/11/2016 JV