59xxBT3 Series, SZ59xxBT3G Series.5 Watt Plastic Surface Mount Zener Voltage Regulators This complete new line of.5 Watt Zener Diodes offers the following advantages. Features Standard Zener Breakdown Voltage Range 3.3 V to 68 V ESD Rating of Class 3 (>6 kv) per Human Body Model Flat Handling Surface for Accurate Placement Package Design for Top Slide or Bottom Circuit Board Mounting Low Profile Package Ideal Replacement for MELF Packages AEC Q Qualified and PPAP Capable SZ59xxBT3G SZ Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements Pb Free Packages are Available CATHODE CASE 3D PLASTIC ANODE Mechanical Characteristics: CASE: Void-free, transfer-molded plastic FINISH: All external surfaces are corrosion resistant with readily solderable leads MAXIMUM CASE TEMPERATURE FOR SOLDERING PURPOSES: 26 C for seconds POLARITY: Cathode indicated by molded polarity notch or cathode band FLAMMABILITY RATING: UL 9 V @.25 in MAXIMUM RATINGS Rating Symbol Value Unit DC Power Dissipation @ T L = 75 C, Measured Zero Lead Length (Note ) Derate above 75 C Thermal Resistance, Junction to Lead DC Power Dissipation @ T A = 25 C (Note 2) Derate above 25 C Thermal Resistance, Junction to Ambient P D R JL P D R JA.5 2 5.5. 25 Operating and Storage Temperature Range T J, T stg 65 to +5 W mw/ C C/W W mw/ C C/W Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.. in square copper pad, FR board. 2. FR Board, using ON Semiconductor minimum recommended footprint. C ORDERING INFORMATION Device Package Shipping 59xxBT3 5 / Tape & 59xxBT3G MARKING DIAGRAM 8xxB AYWW 8xxB = Device Code (Refer to page 2) A = Assembly Location Y = Year WW = Work Week = Pb Free Package SZ59xxBT3G (Pb Free) (Pb Free) 5 / Tape & 5 / Tape & For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Packaging Specifications Brochure, BRD8/D. DEVICE MARKING INFORMATION See specific marking information in the device marking column of the Electrical Characteristics table on page 2 of this data sheet. Semiconductor Components Industries, LLC, 2 November, 2 Rev. 7 Publication Order Number: 593BT3/D
59xxBT3 Series, SZ59xxBT3G Series ELECTRICAL CHARACTERISTICS (T A = 25 C unless otherwise noted, V F =.5 V Max. @ I F = 2 ma for all types) Symbol Parameter I F I Reverse Zener Voltage @ I ZT Reverse Current Maximum Zener Impedance @ I ZT Reverse Current Maximum Zener Impedance @ I ZK Reverse Leakage Current @ V R Reverse Voltage Forward Current V Z I ZT Z ZT I ZK Z ZK I R V R I F V Z V R I R V F I ZT V V F I ZM Forward Voltage @ I F Maximum DC Zener Current Zener Voltage Regulator ELECTRICAL CHARACTERISTICS (T A = 25 C unless otherwise noted, V F =.5 V Max. @ I F = 2 ma for all types) Device* (Note 3) Device Marking Zener Voltage (Note ) Zener Impedance Leakage Current V Z (Volts) @ I ZT Z ZT @ I ZT Z ZK @ I ZK I R @ V R Min Nom Max ma ma A Volts ma(dc) SZ/593BT3, G 83B 3.3 3.3 3.7 3.6 5. 5. 55 59BT3, G 8B 3.2 3.6 3.78.2 9. 5. 35.5. 7 SZ/595BT3, G 85B 3.7 3.9. 96. 7.5 5. 2.5. 385 SZ/596BT3, G 86B.8.3.52 87.2 6. 5. 2.5. 39 SZ/597BT3, G 87B.6.7.9 79.8 5. 5. 2.5.5 39 SZ/598BT3, G 88B.8 5. 5.36 73.5. 35. 2.5 2. 29 SZ/599BT3, G 89B 5.32 5.6 5.88 66.9 2. 25. 2.5 3. 268 SZ/592BT3, G 82B 5.89 6.2 6.5 6.5 2. 2. 2.5. 22 SZ/592BT3, G 82B 6.6 6.8 7. 55. 2.5 2. 2.5 5.2 22 SZ/5922BT3, G 822B 7.2 7.5 7.88 5 3..5 2.5 6. 2 SZ/5923BT3, G 823B 7.79 8.2 8.6 5.7 3.5.5 2.5 6.5 83 SZ/592BT3, G 82B 8.6 9. 9.56.2. 5.5 2.5 7. 65 SZ/5925BT3, G 825B 9.5.5 37.5.5 5.25 2.5 8. 5 5926BT3, G 826B.5.55 3. 5.5 55.25.5 8. 36 SZ/5927BT3, G 827B. 2 2.6 3.2 6.5 55.25.5 9. 25 SZ/5928BT3, G 828B 2.35 3 3.65 28.8 7. 55.25.5 9.9 5 SZ/5929BT3, G 829B.25 5 5.75 25 9. 6.25.5. SZ/593BT3, G 83B 5.2 6 6.8 23. 6.25.5 2.2 9 SZ/593BT3, G 83B 7. 8 8.9 2.8 2 65.25.5 3.7 83 SZ/5932BT3, G 832B 9 2 2 8.7 65.25.5 5.2 75 SZ/5933BT3, G 833B 2.9 22 23. 7 7.5 65.25.5 6.7 68 SZ/593BT3, G 83B 22.8 2 25.2 5.6 9 7.25.5 8.2 63 SZ/5935BT3, G 835B 25.65 27 28.35 3.9 23 7.25.5 2.6 56 SZ/5936BT3, G 836B 28.5 3 3.5 2.5 26 75.25.5 22.8 5 SZ/5937BT3, G 837B 3.35 33 3.65. 33 8.25.5 25. 5 SZ/5938BT3, G 838B 3.2 36 37.8. 38 85.25.5 27. 2 SZ/5939BT3, G 839B 37.5 39.95 9.6 5 9.25.5 29.7 38 SZ/59BT3, G 8B.85 3 5.5 8.7 53 95.25.5 32.7 35 SZ/59BT3, G 8B.65 7 9.35 8. 67.25.5 35.8 32 SZ/592BT3, G 82B 8.5 5 53.55 7.3 7.25.5 38.8 29 SZ/593BT3, G 83B 53.2 56 58.8 6.7 86 3.25.5 2.6 27 59BT3, G 8B 58.9 62 65. 6. 5.25.5 7. 2 SZ/595BT3, G 85B 6.6 68 7. 5.5 2 7.25.5 5.7 22 3. Tolerance and Voltage Regulation Designation The type number listed indicates a tolerance of ±5%.. V Z limits are to be guaranteed at thermal equilibrium. * The G suffix indicates Pb Free package available. I ZM 2
59xxBT3 Series, SZ59xxBT3G Series RATING AND TYPICAL CHARACTERISTIC CURVES (T A = 25 C) PD, MAXIMUM POWER DISSIPATION (WATTS) 3.2 2..6.8 T L T A 25 5 75 25 5 T, TEMPERATURE ( C) IZ, ZENER CURRENT (ma). 2 6 8 Figure. Steady State Power Derating Figure 2. V Z 3.3 thru Volts I Z, ZENER CURRENT (ma). 2 3 5, TEMPERATURE COEFFICIENT (mv/ C) θvz 8 6 2-2 V Z @ I ZT - 6 7 8 2 6 8 2 Figure 3. V Z = 2 thru 68 Volts Figure. Zener Voltage 3.3 to 2 Volts, TEMPERATURE COEFFICIENT (mv/ C) θvz 7 5 3 2 V Z @ I ZT ZZ, DYNAMIC IMPEDANCE (OHMS) I Z(dc) = ma ma 2 ma I Z(rms) =. I Z(dc) 2 3 5 7 Figure 5. Zener Voltage 2 to 68 Volts Figure 6. Effect of Zener Voltage 3
59xxBT3 Series, SZ59xxBT3G Series RATING AND TYPICAL CHARACTERISTIC CURVES (T A = 25 C) C, CAPACITANCE (pf) MEASURED @ V Z /2 MEASURED @ ZERO BIAS, PEAK POWER (kw) P pk. NONREPETITIVE, EXPONENTIAL PULSE WAVEFORM, T J = 25 C T J = 25 C BREAKDOWN VOLTAGE (VOLTS)... T P, PULSE WIDTH (ms) Figure 7. Capacitance Curve Figure 8. Typical Pulse Rating Curve Ippm, PEAK PULSE CURRENT (%) 2 8 6 2 t d s PEAK VALUE I ppm T A = 25 C PW (I D ) IS DEFINED AS THE POINT WHERE THE PEAK CURRENT DECAYS TO 5% OF I pp. HALF VALUE - I pp /2 / s WAVEFORM AS DEFINED BY R.E.A. 2 3 t, TIME (ms) Figure 9. Pulse Waveform 5 2.9 I PEAK 8 Ippm, PEAK PULSE CURRENT (%). I PEAK 6 2.2 T 2 s.5 I PEAK 8/2 s WAVEFORM AS DEFINED BY ANSI C62. AND IEC 8-5...6.8 t, TIME (ms) Figure. Pulse Waveform T = 8 s.
59xxBT3 Series, SZ59xxBT3G Series PACKAGE DIMENSIONS H E E CASE 3D 2 ISSUE F NOTES:. DIMENSIONING AND TOLERANCING PER ANSI Y.5M, 982. 2. CONTROLLING DIMENSION: INCH. 3. 3D OBSOLETE, NEW STANDARD IS 3D 2. b D POLARITY INDICATOR OPTIONAL AS NEEDED (SEE STYLES) MILLIMETERS INCHES DIM MIN NOM MAX MIN NOM MAX A.97 2. 2.2.78.83.87 A.5..5.2..6 b.27.5.63.5.57.6 c.5.28..6..6 D 2.29 2.6 2.92.9.3.5 E.6.32.57.6.7.8 H E.83 5.2 5.59.9.25.22 L.76..52.3.5.6 STYLE : PIN. CATHODE (POLARITY BAND) 2. ANODE A L c A SOLDERING FOOTPRINT*..57 2..787 2..787 SCALE 8: mm inches *For additional information on our Pb Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Typical parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customer s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 563, Denver, Colorado 827 USA Phone: 33 675 275 or 8 3 386 Toll Free USA/Canada Fax: 33 675 276 or 8 3 3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 8 282 9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 2 33 79 29 Japan Customer Focus Center Phone: 8 3 587 5 5 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative 593BT3/D