SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 INNOVATECIS CIA LTD. General Jose Maria Guerrero N69-170 y Alfonso del Hierro Quito, Ecuador 170103 Diego Almeida Phone: 593 260 40607 CALIBRATION Valid To: July 31, 2018 Certificate Number: 4038.01 In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory to perform the following calibrations 1 : I. Dimensional Calipers 9.5 µm 280 µin Depth Gauges 9.5 µm 280 µin Depth Micrometers 0.58 µm 35 µin Height Gauges 9.5 µm 280 µin Indicators Up to 25 mm (>25 to 50) mm (>50 to 100) mm 0.59 µm 0.61 µm 0.89 µm 35 µin Inside Micrometers 0.58 µm 35 µin (A2LA Cert. No. 4038.01) Revised 10/18/2017 Page 1 of 8

Outside Micrometers 0.58 µm 35 µin Thickness Gauges Up to 50 mm Up to 2 in 1.0 µm 32 µin II. Electrical DC/Low Frequency DC Voltage Measure (0 to 100) mv (0.1 to 1) V (1 to 10) V (10 to 100) V (0.1 to 1) kv 0.82 µv 6.3 µv 66 µv 0.66 mv 7.6 mv DC Voltage Generate 3 (0 to 100) mv (0.1 to 1) V (1 to 10) V (10 to 100) V (0.1 to 1) kv 1.0 µv 0.0030 mv 0.038 mv 0.40 mv 4.0 mv Resistance Generate 3 (0 to 10) Ω (10 to 100) Ω (0.1 to 1) kω (1 to 10) kω (10 to 100) kω (0.1 to 1) MΩ (1 to 10) MΩ 1.2 mω 1.2 mω 0.012 Ω 0.12 Ω 1.2 Ω 21 Ω 0.84 kω Resistance (2 Wire) Measure (0 to 10) Ω (10 to 100) Ω (0.1 to 1) kω (1 to 10) kω (10 to 100) kω (0.1 to 1) MΩ (1 to 10) MΩ (10 to 100) MΩ (0.1 to 1) TΩ 6.6 mω 61 mω 0.058 Ω 0.58 Ω 5.8 Ω 58 Ω 0.58 kω 4.0 kω 6.0 GΩ (A2LA Cert. No. 4038.01) Revised 10/18/2017 Page 2 of 8

Resistance (4 Wire) Measure (0 to 1) Ω (0 to 10) Ω (10 to 100) Ω (0.1 to 1) kω (1 to 10) kω (10 to 100) kω 6.6 mω 6.6 mω 61 mω 0.058 Ω 0.58 Ω 5.8 Ω Capacitance Generate 3 (10 to 100) nf (0.1 to 1) µf (1 to 10) µf 0.12 nf 0.65 nf 27 nf DC Current Measure (0 to 10) na (10 to 100) na (0.1 to 1) µa (1 to 10) µa (10 to 100) µa (0.1 to 1) ma (1 to 10) ma (10 to 100) ma (0.1 to 1) A (1 to 10) A (10 to 30) A 0.15 pa 0.15 pa 0.16 pa 0.22 pa 0.92 pa 1.1 pa 59 pa 1.1 µa 0.23 ma 0.47 ma 5.8 ma DC Current Generate 3 (0 to 100) µa (0.1 to 1) ma (1 to 10) ma (10 to 100) ma (0.1 to 1) A (1 to 10) A (10 to 30) A 0.72 na 7.2 na 0.075 µa 0.75 µa 0.010 ma 0.50 ma 5.1 ma Parameter/Range Frequency CMC 2 ( ) Comments AC Voltage Measure 40 Hz to 20 khz (0 to 100) mv (0.1 to 1) V (1 to 10) V (10 to 100) V (0.1 to 1) kv 0.011 µv 44 µv 0.42 mv 7.2 mv 0.57 V (A2LA Cert. No. 4038.01) Revised 10/18/2017 Page 3 of 8

Parameter/Range Frequency CMC 2 ( ) Comments AC Voltage Generate 3 40 Hz to 20 khz (0 to 100) mv (0.1 to 1) V (1 to 10) V (10 to 100) V (0.1 to 1) kv 0.066 mv 0.13 mv 1.2 mv 0.030 V 0.60 V AC Current Measure 40 Hz to 1 khz (0 to 100) µa (0.1 to 1) ma (1 to 10) ma (10 to 100) ma (0.1 to 1) A (1 to 10) A (10 to 30) A 0.023 µa 0.22 µa 2.3 µa 8.1 µa 0.10 ma 5.8 ma 57 ma Electrical Simulation of RTD Temperature Indicators 3 (-100 to 800) C 0.018 C Electrical Simulation of Thermocouple Temperature Indicators 3 Type J (-210 to 0) C (0 to 400) C (400 to 1200) C 0.066 C 0.068 C with Transmille EA001A Type K (-200 to 200) C (200 to 700) C (700 to 1370) C 0.073 C 0.077 C Type T (-250 to 0) C (0 to < 400) C 400 C 0.073 C Type R & S (0 to 400) C (400 to 1760) C 0.33 C 0.35 C Type B (600 to 1820) C 0.54 C (A2LA Cert. No. 4038.01) Revised 10/18/2017 Page 4 of 8

Electrical Simulation of Thermocouple Temperature Indicators 3 (cont) Type N (-200 to 120) C (120 to 1300) C 0.085 C 0.095 C with Transmille EA001A Type E (-250 to -25) C (-25 to 350) C (350 to 1000) C 0.064 C 0.065 C 0.072 C Type L (-200 to 0) C (0 to 900) C 0.066 C 0.069 C Type U (-200 to 0) C (0 to 600) C 0.074 C Type C (0 to 650) C (650 to <1000) C 1000 C 0.14 C 0.14 C 0.15 C III. Fluid Quantities Volumetric Containers >100 µl to 5 ml (> 5 to 10) ml (>10 to 30) ml (>30 to 50) ml (>50 to 100) ml (>100 to 200) ml (>200 to 2000) ml 1.8 µl 1.8 µl 2.0 µl 2.3 µl 3.5 µl 5.0 µl 0.58 ml Gravimetric method using analytical balance (A2LA Cert. No. 4038.01) Revised 10/18/2017 Page 5 of 8

IV. Mechanical Parameter/Equipment Range CMC 2, 4 ( ) Comments Gauge Pressure 3 Pneumatic, Hydraulic (-12 to 150) psig (>150 to 325) psig (>325 to 500) psig (>500 to 1300) psig (>1300 to 1900) psig (>1900 to 2500) psig (>2500 to 3000) psig (>3300 to 5000) psig (>5000 to 6000) psig (>6000 to 7000) psig (>7000 to 10 000) psig 0.023 psig (0.17 kpa) 0.14 psig (0.96 kpa) 0.15 psig (1.0 kpa) 0.19 psig (1.3 kpa) 0.42 psig (2.9 kpa) 0.53 psig (3.7 kpa) 0.87 psig (6.0 kpa) 1.0 psig (7.2 kpa) 1.5 psig (11 kpa) 1.7 psig (13 kpa) 1.9 psig (14 kpa) Crystal XP2i, Fluke 700G, Ametek Jofra IPI MK. II, or Martel BGPIR-PRO-10K Torque Up to 100 N m (100 to 1000) N m 0.70 % 0.22 % Stahlwille 7728-1 Stahlwille 7728-1S Stahlwille 7728-10 Stahlwille 7728-100 Mass Scales and Balances 3 (1 to 500) mg (1 to 1000) g 1.0 mg 0.13 g OIML F1 weights OIML Class E2 weights (1 to 2000) g (2000 to 5000) g 0.13 g 0.29 g OIML Class E2 and F1 weights (5 to 200) kg 0.04 kg OIML Class M1 weights V. Thermodynamic Baths 3 (-25 to 0) C (0 to 140) C (140 to 200) C (200 to 250) C 0.041 C 0.033 C 0.066 C 0.089 C PRT probe and temperature indicator (A2LA Cert. No. 4038.01) Revised 10/18/2017 Page 6 of 8

Dry Blocks 3 (-25 to 0) C (0 to 140) C (140 to 350) C 0.062 C 0.057 C 0.074 C PRT probe & temperature indicator Climatic Chambers 3 (Including Oven, Incubator, Refrigerator, Freezer) (-25 to 0) C (0 to 60) C (>60 to 140) C (>140 to 300) C 0.9 C 1.1 C 1.3 C 1.6 C PRT probe & temperature indicator Thermocouple & readout Bi-metal Thermometers 3 (0 to 350) C 0.12 C PRT probe & temperature indicator Digital Thermometers (TC or RTD Probes & Indicators) 3 (-25 to 140) C (141 to 350) C 0.06 C 0.24 C ISOTECH PRT T100-250 probe with Liquid-In-Glass (-25 to 140) C 0.58 C PRT probe & temperature Thermometers 3 indicator Relative Humidity Thermo-Hygrometer 20 % RH 50 % RH 75 % RH 1.2 % RH 1.5 % RH 2.3 % RH Control Company 4085 VI. Time & Frequency Frequency Measuring Equipment (0 to 100) Hz 100 Hz to 1 khz (1 to 10) khz (10 to 20) khz (20 to 50) khz (50 to 100) khz 100 khz to 1 MHz (1 to 10) MHz 0.017 Hz 0.60 Hz 0.60 Hz 5.8 Hz 5.8 Hz 5.8 Hz 0.60 khz 5.7 khz Frequency Measure 1 Hz to 100 khz 100 khz to 1 MHz 0.12 Hz 5.8 khz (A2LA Cert. No. 4038.01) Revised 10/18/2017 Page 7 of 8

1 This laboratory offers commercial and field calibration service. 2 Calibration and Measurement Capability Uncertainty (CMC) is the smallest uncertainty of measurement that a laboratory can achieve within its scope of accreditation when performing more or less routine calibrations of nearly ideal measurement standards or nearly ideal measuring equipment. CMCs represent expanded uncertainties expressed at approximately the 95 % level of confidence, usually using a coverage factor of k = 2. The actual measurement uncertainty of a specific calibration performed by the laboratory may be greater than the CMC due to the behavior of the customer s device and to influences from the circumstances of the specific calibration. 3 Field calibration service is available for this calibration and this laboratory meets A2LA R104 General Requirements: Accreditation of Field Testing and Field Calibration Laboratories for these calibrations. Please note the actual measurement uncertainties achievable on a customer's site can normally be expected to be larger than the CMC found on the A2LA Scope. Allowance must be made for aspects such as the environment at the place of calibration and for other possible adverse effects such as those caused by transportation of the calibration equipment. The usual allowance for the actual uncertainty introduced by the item being calibrated, (e.g. resolution) must also be considered and this, on its own, could result in the actual measurement uncertainty achievable on a customer s site being larger than the CMC. 4 In the statement of CMC, percentages are to be read as percent of reading, unless otherwise noted. (A2LA Cert. No. 4038.01) Revised 10/18/2017 Page 8 of 8

Accredited Laboratory A2LA has accredited INNOVATECIS CIA. LTDA. Quito, ECUADOR for technical competence in the field of Calibration This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories. This laboratory also meets R205 Specific Requirements: Calibration Laboratory Accreditation Program. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated 8 January 2009). Presented this 7 th day of June 2016. President and CEO For the Accreditation Council Certificate Number 4038.01 Valid to July 31, 2018 Revised on November 22, 2016 For the calibrations to which this accreditation applies, please refer to the laboratory s Calibration Scope of Accreditation.