AVERAGE DURATION 2 hours CHALLENGE LEVEL THE LEGO MOVIE 2 - Awesome! Now let s paint your favorite character on your own snack plate! THE LEGO MOVIE 2 CHARACTERS MATERIALS TIPS Bisque: Smooth Salad Plate, Small Star Plate MB993 Project Templates Scissors Tracing Paper Masking Tape Pen Small Round Brush Detail Brush Medium Flat Brush Right after tracing the image onto plate, just before painting, wipe the bisque down with a damp sponge to remove dust. Apply three coats of underglaze for solid color coverage. Unpainted areas will stay white. Paint: See individual project sheets. TEMPLATE FILE NAME LegoMovie2Characters THEME THE LEGO MOVIE 2 Kids Night Out TAGS Plate, Ceramic, THE LEGO MOVIE, THE LEGO MOVIE 2, Emmet, Wyldstyle, Lucy, General Mayhem, Characters, Trace
AVERAGE DURATION 2 hours CHALLENGE LEVEL THE LEGO MOVIE 2 - Awesome! Now let s paint your favorite character on your own snack plate! EMMET MATERIALS Bisque: Smooth Salad Plate Project Template Scissors Tracing Paper Masking Tape Pen Small Round Brush Detail Brush TIPS To trace, cut the circle out from the image template and tape it to the plate along the top. Then slide the tracing paper under the template circle. Use a pen to trace the charachter. To blend the colors better, use a wet brush. Paint: 46, 21, 25, 30, 31, 98, 67 TEMPLATE FILE NAME LegoEmmet THEME THE LEGO MOVIE 2 Kids Night Out TAGS Plate, Ceramic, THE LEGO MOVIE, THE LEGO MOVIE 2, Emmet, Trace
INSTRUCTIONS 1. Trace the image onto plate using a pen with the template mage and tracing paper. Cut out template circle, position it on the plate, and tape it to the bisque along the top. Place the tracing paper under the template circle ( active side to the bisque ) and trace the outlines using a pen. Lift the papers to check your progress. Remove when done tracing. 2. Carefully paint the eyes and mouth with one coat of black # 31. Use a detail brush. 3. Paint the hair with # 30 using a small round brush. Apply 2 to 3 coats. Leave some of the horizontal hair lines unpainted. 4. Paint the face and neck with Yellow # 21. Do not paint inside the three shapes that are the highlight areas outlined on the neck, cheek, and forehead. Use a small round brush. 5. Use a small round brush to paint the face with # 46. This time paint the entire face including the highlight shapes left unpainted in the previous step. 6. Using # 25, add a soft shadow at the bottom of the chin and across the forehead, directly under the hair.. 7. Add second coat of Black in the eyes and mouth. 8. Paint the tongue with red # 98, two coats. 9. Add a vertical brush stroke over the highlighted area on the right side of the forehead.
TEMPLATE
AVERAGE DURATION 2 hours CHALLENGE LEVEL THE LEGO MOVIE 2 - Awesome! Now let s paint your favorite character on your own snack plate! WYLDSTYLE / LUCY MATERIALS Bisque: Smooth Salad Plate Project Template Scissors Tracing Paper Masking Tape Pen Small Round Brush Detail Brush TIPS To trace, cut the circle out from the image template and tape it to the plate along the top. Then slide the tracing paper under the template circle. Use a pen to trace the charachter. To blend the colors better, use a wet brush. Paint: 21,13, 30, 31, 7, 10, 64, 3, 67 TEMPLATE FILE NAME LegoWyldstyle THEME THE LEGO MOVIE 2 Kids Night Out TAGS Plate, Ceramic, THE LEGO MOVIE, THE LEGO MOVIE 2, Wyldstyle, Lucy, Trace
INSTRUCTIONS 1. Trace the image onto plate using a pen with the template mage and tracing paper. Cut out template circle, position it on the plate, and tape it to the bisque along the top. Place the tracing paper under the template circle ( active side to the bisque ) and trace the outlines using a pen. Lift the papers to check your progress. Remove when done tracing. 2. Carefully paint the eyes and hair with one coat of black # 31. 3. Paint the colored parts of the hair with purple # 10 and blue # 64 using a small round brush. Apply 2 to 3 coats. 4. Paint the freckles on the face using a detail brush and # 30. Then paint the frames of the glasses and the scarf using browns # 13 and # 30. 5. Paint the face with yellow # 21. Use a small round brush. Paint over the freckles making sure you can still see where they are. Make sure to avoid painting over the lips. 6. Using # 13, add a soft shadow at the bottom of the chin, on the sides of the face, and across the forehead, directly under the lasses. At this time, also touch up the freckles with # 13. 7. Add second coat of black in the eyes, brow and the hair. 8. Paint the lips with pink # 7. Apply 2-3 coats with a etail brush. 9. Paint another coat of yellow on the face. Paint over the shadowed areas, but avoid the freckles. 10. Paint the lenses in the glasses using pink # 3. 11. Add a single white brush stroke to the lenses using # 67.
TEMPLATE
AVERAGE DURATION 2 hours CHALLENGE LEVEL THE LEGO MOVIE 2 - Awesome! Now let s paint your favorite character on your own snack plate! GENERAL MAYHEM MATERIALS Bisque: Smooth Salad Plate Project Template Scissors Tracing Paper Masking Tape Pen Small Round Brush Medium Flat Brush TIPS To trace, cut the circle out from the image template and tape it to the plate along the top. Then slide the tracing paper under the template circle. Use a pen to trace the charachter. When painting, simply let your brush strokes follow the sapes. Paint: 43, 2, 64, 7, 66, 67 TEMPLATE FILE NAME LegoGeneralMayhem THEME THE LEGO MOVIE 2 Kids Night Out TAGS Plate, Ceramic, THE LEGO MOVIE, THE LEGO MOVIE 2, General Mayhem, Trace
INSTRUCTIONS 1. Trace the image onto plate using a pen with the template mage and tracing paper. Cut out template circle, position it on the plate, and tape it to the bisque along the top. Place the tracing paper under the template circle ( active side to the bisque ) and trace the outlines using a pen. Lift the papers to check your progress. Remove when done tracing. 2. Paint the background with # 43 using a medium flat brush. Apply 2 to 3 coats. 3. Paint the helmet face with # 2. Leave the highlight space on the left unpainted on the first coat. Paint over the entire helmet face after that. You should see the difference in coverage. 4. Use a small round brush with # 66 to paint the three pink parts of the helmet, the center top and the ear covers on each side. Refer to the sample photo. Apply two coats to each part. 5. Use the same brush with # 7 pink and add some pink brush strokes along the bottom of the helmet as shown. After that apply a layer of this pink to the three helmet parts painted in the previous step. 6. Wash the small round brush and use light blue # 64 to add shading to the helmet and the suit as shown. Blend this color into bisque following the shapes of the helmet and the suit. 7. Use the same technique to blend this lighter blue into the upper part of the dark helmet face painted previously with # 2. Blend the light blue into the dark blue by softening the edge of the lighter blue with water on the brush. 8. Use white # 67 to paint the main highlight shape on the helmet. 9. Add white to the inpainted white parts of the helmet as needed.
TEMPLATE
AVERAGE DURATION 2 hours CHALLENGE LEVEL THE LEGO MOVIE 2 - Awesome! Now let s paint your favorite character on your own snack plate! YELLOW STAR MATERIALS Bisque: Small Star Plate SKU MB993 Project Template Scissors Tracing Paper Masking Tape Pen Small Round Brush Medium Flat Brush Detail Brush TIPS To trace, cut the diamond / square out from the image template and tape it to the plate along the top. Then slide the tracing paper under the template mage. Use a pen to trace the charachter. Use a detail brush to carefully paint the details. Paint: 46, 25, 7, 31 TEMPLATE FILE NAME LegoYellowStar THEME THE LEGO MOVIE 2 Kids Night Out TAGS Plate, Ceramic, THE LEGO MOVIE, THE LEGO MOVIE 2, YellowStar, Trace
INSTRUCTIONS 1. Trace the image onto plate using a pen with the template mage and tracing paper. Cut out template diamind, position it on the plate, and tape it to the bisque along the top. Place the tracing paper under the template paper ( active side to the bisque ) and trace the outlines using a pen. Lift the papers to check your progress. Remove when done tracing. 2. Carefully paint the eyes, the eye brows, and mouth with one coat of black # 31. Use a detail brush. Avoid white dots inside the eyes and the tongue inside the mouth. 3. Paint the cheeks with # 7 pink. 4. Paint he outline around the diamond shape with # 25 using a small round brush. 5. Use a small round brush to paint the face and the tongue inside the mouth with # 46. Avoid painting over the eyes and the cheeks by being careful. 6. Use a medium flat brush to paint the rest of the star plate with yellow # 46. Apply 2 to 3 coats. 7. Add second coat of Black to the eyes and mouth. 8. Add second coat of pink to the cheeks.
TEMPLATE