MODEL RTA - 3520 Thanks for purchasing one of our products. Please read carefully the assembly instructions before the installation. Please save this manual for future reference. Complete video assembly demonstration is available at: www.rtaproducts.com/assembly-videos.htm MODEL RTA-3520
RTA-3520 DIMENSIONS Product Size: 7.5"W x 23"D x 30"H MAXIMUM WEIGHT CAPACITIES DO NOT exceed this limit Please use care and good judgement when placing objects on wood surface
RTA-3520 P.3 PARTS LIST 5 1 11 10 9 13 1 2 3 Left Panel Middle Panel Studs Top Panel 5 6 7 8 X 2 Horizontal Panel Bottom Panel Back Panel Front Base Panel 9 10 11 Side Structure Right Panel Back Structure Main Panel 13 1 15 16 Right Left X X 1 SET X 2 Keyboard Panel Slider Base Keyboard Slider Support Tubes
RTA-3520 P. 17 18 20 X 3 X 3 X 3 X 3 Drawer Left Panel Drawer Right Panel Drawer Front Panel Drawer Bottom Panel 21 X 3SET 22 23 Left Right Left Right X 3 Drawer Back Panel Drawer Slider Handle X 3 LIST PART QTY. ITEM PART QTY. ITEM A 2 3X15 MM I 2 6X60 MM B 26 6X0 MM J X35 MM C 6X75 MM K 6 X20 MM D 6X35 MM L 2 E 2 6X25 MM 1 F 6X MM G X MM H X1 MM
RTA-3520 P.5
RTA-3520 P.6
RTA-3520 P.7 ASSEMBLY STEPS: Complete video assembly demonstration is available at: www.rtaproducts.com/assembly-videos.htm 1 1 2 22 3PCS 22 3PCS Left Right A 3X15 MM PCS Grab all the flat shaped Drawer Sliders (22) and set aside the L shaped ones. With the Left & Middle Panels (1&2) oriented as illustrated, assemble the flat sliders (22) to the holes on their inside faces. The wheels will be located at the front and facing down. 2 6 8 5 6 8 Detailed instructions on PAGE 5 TOP OF PANEL B 6X0 MM 5PCS Join the Front Base Panel (8) to the Bottom Panel (6) by inserting the wood pins of (8) into the holes of (6) as shown. Screw the Bolts (B) to the corresponding holes on the inside face of Left Panel (1), then assemble to it the Horizontal Panel (5), Bottom Panel (6) and Small Front Panel (8) by turning all the corresponding cam locks. 1 3 7 5 6 Slide in the Back Panel (7) thru the channels in between the Horizontal Panel (5) and Bottom Panel (6) as shown. Make sure the panel fits inside all the channels.
RTA-3520 P.8 2 Detailed instructions on PAGE 5 Screw the Bolts (B) to the corresponding holes on the inside face of Middle Panel (2), then assemble the Middle Panel (2) to the Horizontal Panel (5), Bottom Panel (6) and Front Base Panel (8) by turning all the corresponding cam locks. 5 6 8 B 6X0 MM 5PCS 5 1 2 Screw the Bolts (B) to the corresponding holes on the inside face of Top Panel (), then assemble it to the cabinet by turning the corresponding cam locks. Detailed instructions on PAGE 5 B 6X0 MM PCS 6 7 9 10 Use Screws (C) to assemble the Right Panel (10) to the Side Structure (9). Please refer to PAGE 6 to troubleshoot this step. Screw the Studs (3) to the Side Structure (9). C 6X75 MM PCS 9 3 2PCS
RTA-3520 P.9 8 E D 9 11 2 D 6X35 MM 2PCS Use Screws (D & E) to assemble the Back Structure (11) between the Middle Panel (2) and Side Structure (9). E 6X25 MM 2PCS 9 10 1 PCS 1 PCS 15 15 Right Left Use Screws (F) to affix the Slider Bases (1) to the Main Panel (). F 6X MM PCS Use Screws (G) to fix the Keyboard Slider (15) to the Slider Bases (1) as illustrated. Please note the position of the tabs on the sliders. G X MM PCS 11 Use Screws (H) to affix the Support Tubes (16) to the Main Panel (). 16 2PCS H X1 MM 8PCS
RTA-3520 P.10 L 2PCS I D D I 9 Place the plastic washer (L) in between the Top Panel () and Support Tubes (16), and assemble the Main Panel () using screws (D) on the LEFT and (I) on the RIGHT. I D 6X60 MM 6X35 MM 2PCS 2PCS 13 Use Screws (H) to assemble the Keyboard Panel (13) to the Keyboard Slider (15). 13 15 13 H X1 MM PCS Screw Bolts (B) to the holes on the inside face of Drawer Front Panel (), then assemble the Drawer Left & Right Panels (17 &18) as shown by turning the cam locks. 1 15 17 18 17 20 18 Detailed instructions on PAGE 5 B 6X0 MM PCS Slide in the Drawer Bottom Panel (20) thru the channels in between panels (17) & (18) as shown. Make sure the panel fits inside all the channels.
RTA-3520 P.11 16 21 Assemble the Drawer Back Panel (21) between the Drawer Left & Right Panels (17&18) using Screws (J) as shown. 17 18 J X35 MM PCS 17 22 22 Place the drawer upside-down. Grab the L shaped sliders (22) and assemble them to the drawer using Screws (A), with wheels facing towards the back of the drawer. Make sure the sliders are touching the side panels, and that they are not up in the air. A 3X15 MM PCS 18 23 Assemble the Handle (23) to the Drawer Front Panel () using Screws (K) as shown. PLEASE REPEAT STEP 1 TO FOR OTHER TWO DRAWERS K X20 MM 2PCS Carefully insert all the drawers starting from the bottom. Make sure the wheels from the drawers engage and roll in the middle of the sliders.